CAD Server and Client Version mismatch

Hi All,
When we try to install fresh CAD client the version is different from the server. We are using 8.5.2a server and client shows 8.5.1. Any impact of this mismatch? How do we upgrade the client? Should we re-install the client?
Regards,
Adithya

Hello,
Anand is right but also you have to make sure that the server is willing to check the client for a update because you can turn it off or on, so in your case i think it is off.
To turn it on you have to launch the postinstall on the CAD server , go to the services configuration , you will find there a radio button for : would you like CAD automatic updates enabled? you have to choose yes.
In that case the Agent will check for a update when it is launched.
Amer

Similar Messages

  • Server and client version for configuring/developing offline kapsel apps

    Hi all.
    I am planning to develop an offline Kapsel app.
    I have two questions.
    Q1.I have installed SP05 version for SMP server and SP06 version as SMP client. Is this configuration sufficient to begin with?
    Q2. Is a delta token enabled SAP ABAP service mandatory for developing an offline app?
    Need your help on this.
    Thanks.

    Hi Daniel Van Leeuwen ,Jitendra Kansal
    I am using SAP Netweaver Gateway services instead of Integration Gateway.
    I am now able to read the data when online, but get an error when I try to open the Offline store.
    Does this have to do anything with the Netweaver Gateway?
    The server log is as below.
    #2.0#2015-04-23 07:25:11.9#+0:00#INFO####Offline#1429708585665001#127d6d6b-e9e6-11e4-8000-d25ebbb51773##com.sap.mobile.platform.server.mobilink.NativeLogger:doMessageLogged########450###<47> Synchronization failed#
    #2.0#2015-04-23 07:25:11.021#+0:00#ERROR#RequestResponse#200##Offline#1429708585072043#127d6d6b-e9e6-11e4-8000-d25ebbb51773#com.mycompany.app#com.sap.mobile.platform.server.mobilink.NativeLogger:doMessageLogged#username#######447###<47> [-10158]  	at org.apache.olingo.odata2.api.ep.EntityProvider.readMetadata(EntityProvider.java:809)#
    #2.0#2015-04-23 07:25:11.021#+0:00#ERROR#RequestResponse#200##Offline#1429708585072044#127d6d6b-e9e6-11e4-8000-d25ebbb51773#com.mycompany.app#com.sap.mobile.platform.server.mobilink.NativeLogger:doMessageLogged#username#######447###<47> [-10158]  	at com.sap.odata.offline.scripts.ODataSyncHandler.prepareMetadata(ODataSyncHandler.java:358)#
    #2.0#2015-04-23 07:25:11.021#+0:00#ERROR#RequestResponse#200##Offline#1429708585072045#127d6d6b-e9e6-11e4-8000-d25ebbb51773#com.mycompany.app#com.sap.mobile.platform.server.mobilink.NativeLogger:doMessageLogged#username#######447###<47> [-10158]  	at com.sap.odata.offline.scripts.ODataSyncHandler.doHandleUploadData(ODataSyncHandler.java:209)#
    #2.0#2015-04-23 07:25:11.021#+0:00#ERROR#RequestResponse#200##Offline#1429708585072046#127d6d6b-e9e6-11e4-8000-d25ebbb51773#com.mycompany.app#com.sap.mobile.platform.server.mobilink.NativeLogger:doMessageLogged#username#######447###<47> [-10158]  	at com.sap.odata.offline.scripts.ODataSyncHandler$1.call(ODataSyncHandler.java:174)#
    #2.0#2015-04-23 07:25:11.021#+0:00#ERROR#RequestResponse#200##Offline#1429708585072047#127d6d6b-e9e6-11e4-8000-d25ebbb51773#com.mycompany.app#com.sap.mobile.platform.server.mobilink.NativeLogger:doMessageLogged#username#######447###<47> [-10158]  	at com.sap.odata.offline.smp.MLSMPFactory.executeWithContext(MLSMPFactory.java:156)#
    #2.0#2015-04-23 07:25:11.021#+0:00#ERROR#RequestResponse#200##Offline#1429708585072048#127d6d6b-e9e6-11e4-8000-d25ebbb51773#com.mycompany.app#com.sap.mobile.platform.server.mobilink.NativeLogger:doMessageLogged#username#######447###<47> [-10158]  	at com.sap.odata.offline.scripts.ODataSyncHandler.handle_UploadData(ODataSyncHandler.java:179)#
    #2.0#2015-04-23 07:25:11.021#+0:00#ERROR#RequestResponse#200##Offline#1429708585072049#127d6d6b-e9e6-11e4-8000-d25ebbb51773#com.mycompany.app#com.sap.mobile.platform.server.mobilink.NativeLogger:doMessageLogged#username#######447###<47> [-10158]  	at sun.reflect.GeneratedMethodAccessor423.invoke(Unknown Source)#
    #2.0#2015-04-23 07:25:11.021#+0:00#ERROR#RequestResponse#200##Offline#1429708585072050#127d6d6b-e9e6-11e4-8000-d25ebbb51773#com.mycompany.app#com.sap.mobile.platform.server.mobilink.NativeLogger:doMessageLogged#username#######447###<47> [-10158]  	at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)#
    #2.0#2015-04-23 07:25:11.021#+0:00#ERROR#RequestResponse#200##Offline#1429708585072051#127d6d6b-e9e6-11e4-8000-d25ebbb51773#com.mycompany.app#com.sap.mobile.platform.server.mobilink.NativeLogger:doMessageLogged#username#######447###<47> [-10158]  	at java.lang.reflect.Method.invoke(Method.java:606)#
    #2.0#2015-04-23 07:25:11.021#+0:00#ERROR#RequestResponse#200##Offline#1429708585072052#127d6d6b-e9e6-11e4-8000-d25ebbb51773#com.mycompany.app#com.sap.mobile.platform.server.mobilink.NativeLogger:doMessageLogged#username#######447###<47> [-10158]  	at ianywhere.ml.script.MethodInfo.invoke(MethodInfo.java:11826)#
    #2.0#2015-04-23 07:25:11.021#+0:00#ERROR#RequestResponse#200##Offline#1429708585072053#127d6d6b-e9e6-11e4-8000-d25ebbb51773#com.mycompany.app#com.sap.mobile.platform.server.mobilink.NativeLogger:doMessageLogged#username#######447###<47> [-10158]  '#
    #2.0#2015-04-23 07:25:11.021#+0:00#ERROR#RequestResponse#200##Offline#1429708585072054#127d6d6b-e9e6-11e4-8000-d25ebbb51773#com.mycompany.app#com.sap.mobile.platform.server.mobilink.NativeLogger:doMessageLogged#username#######447###<47> [-10225] Failure occurred while executing user supplied code in the server#
    #2.0#2015-04-23 07:25:11.021#+0:00#INFO#RequestResponse#200##Offline#1429708585072055#127d6d6b-e9e6-11e4-8000-d25ebbb51773#com.mycompany.app#com.sap.mobile.platform.server.mobilink.NativeLogger:doMessageLogged#username#######447###<47> end_upload <connection> (no script)#
    #2.0#2015-04-23 07:25:11.021#+0:00#INFO#RequestResponse#200##Offline#1429708585072056#127d6d6b-e9e6-11e4-8000-d25ebbb51773#com.mycompany.app#com.sap.mobile.platform.server.mobilink.NativeLogger:doMessageLogged#username#######447###<47> end_publication <connection> (no script)#
    #2.0#2015-04-23 07:25:11.021#+0:00#INFO#RequestResponse#200##Offline#1429708585072057#127d6d6b-e9e6-11e4-8000-d25ebbb51773#com.mycompany.app#com.sap.mobile.platform.server.mobilink.NativeLogger:doMessageLogged#username#######447###<47> end_synchronization <connection> (no script)#
    #2.0#2015-04-23 07:25:11.005#+0:00#DEBUG#RequestResponse#200##Offline#1429708585072033#127d6d6b-e9e6-11e4-8000-d25ebbb51773#com.mycompany.app#com.sap.mobile.platform.server.mobilink.SessionLogger:debug#username#######447###ML_SCRIPT Exit handle_UploadData: remoteID=127d6d6a-e9e6-11e4-8000-d25ebbb51773#
    #2.0#2015-04-23 07:25:11.005#+0:00#ERROR#RequestResponse#200##Offline#1429708585072034#127d6d6b-e9e6-11e4-8000-d25ebbb51773#com.mycompany.app#com.sap.mobile.platform.server.mobilink.NativeLogger:doMessageLogged#username#######447###<47> [-10158] Exception thrown in method: 'public void com.sap.odata.offline.scripts.ODataSyncHandler.handle_UploadData(ianywhere.ml.script.UploadData) throws java.lang.Exception'. Error description: 'java.lang.IndexOutOfBoundsException: Index: 0, Size: 0'.#
    #2.0#2015-04-23 07:25:11.005#+0:00#ERROR#RequestResponse#200##Offline#1429708585072035#127d6d6b-e9e6-11e4-8000-d25ebbb51773#com.mycompany.app#com.sap.mobile.platform.server.mobilink.NativeLogger:doMessageLogged#username#######447###<47> [-10158]  Stack trace: 'java.lang.IndexOutOfBoundsException: Index: 0, Size: 0#
    #2.0#2015-04-23 07:25:11.005#+0:00#ERROR#RequestResponse#200##Offline#1429708585072036#127d6d6b-e9e6-11e4-8000-d25ebbb51773#com.mycompany.app#com.sap.mobile.platform.server.mobilink.NativeLogger:doMessageLogged#username#######447###<47> [-10158]  	at java.util.ArrayList.rangeCheck(ArrayList.java:604)#
    #2.0#2015-04-23 07:25:11.005#+0:00#ERROR#RequestResponse#200##Offline#1429708585072037#127d6d6b-e9e6-11e4-8000-d25ebbb51773#com.mycompany.app#com.sap.mobile.platform.server.mobilink.NativeLogger:doMessageLogged#username#######447###<47> [-10158]  	at java.util.ArrayList.get(ArrayList.java:382)#
    #2.0#2015-04-23 07:25:11.005#+0:00#ERROR#RequestResponse#200##Offline#1429708585072038#127d6d6b-e9e6-11e4-8000-d25ebbb51773#com.mycompany.app#com.sap.mobile.platform.server.mobilink.NativeLogger:doMessageLogged#username#######447###<47> [-10158]  	at org.apache.olingo.odata2.core.ep.consumer.XmlMetadataConsumer.readAssociation(XmlMetadataConsumer.java:427)#
    #2.0#2015-04-23 07:25:11.005#+0:00#ERROR#RequestResponse#200##Offline#1429708585072039#127d6d6b-e9e6-11e4-8000-d25ebbb51773#com.mycompany.app#com.sap.mobile.platform.server.mobilink.NativeLogger:doMessageLogged#username#######447###<47> [-10158]  	at org.apache.olingo.odata2.core.ep.consumer.XmlMetadataConsumer.readSchema(XmlMetadataConsumer.java:152)#
    #2.0#2015-04-23 07:25:11.005#+0:00#ERROR#RequestResponse#200##Offline#1429708585072040#127d6d6b-e9e6-11e4-8000-d25ebbb51773#com.mycompany.app#com.sap.mobile.platform.server.mobilink.NativeLogger:doMessageLogged#username#######447###<47> [-10158]  	at org.apache.olingo.odata2.core.ep.consumer.XmlMetadataConsumer.readMetadata(XmlMetadataConsumer.java:102)#
    #2.0#2015-04-23 07:25:11.005#+0:00#ERROR#RequestResponse#200##Offline#1429708585072041#127d6d6b-e9e6-11e4-8000-d25ebbb51773#com.mycompany.app#com.sap.mobile.platform.server.mobilink.NativeLogger:doMessageLogged#username#######447###<47> [-10158]  	at org.apache.olingo.odata2.core.edm.provider.EdmxProvider.parse(EdmxProvider.java:51)#
    #2.0#2015-04-23 07:25:11.005#+0:00#ERROR#RequestResponse#200##Offline#1429708585072042#127d6d6b-e9e6-11e4-8000-d25ebbb51773#com.mycompany.app#com.sap.mobile.platform.server.mobilink.NativeLogger:doMessageLogged#username#######447###<47> [-10158]  	at org.apache.olingo.odata2.core.ep.ProviderFacadeImpl.readMetadata(ProviderFacadeImpl.java:225)#
    #2.0#2015-04-23 07:25:10.88#+0:00#INFO####Offline#1429708585072001#127d6d6b-e9e6-11e4-8000-d25ebbb51773##com.sap.mobile.platform.server.mobilink.NativeLogger:doMessageLogged########447###<47> Table #1: LODATA_SYS_PROPERTIES, 3 columns#
    #2.0#2015-04-23 07:25:10.88#+0:00#INFO####Offline#1429708585072002#127d6d6b-e9e6-11e4-8000-d25ebbb51773##com.sap.mobile.platform.server.mobilink.NativeLogger:doMessageLogged########447###<47> propertyID integer NOT NULL PRIMARY KEY#
    #2.0#2015-04-23 07:25:10.88#+0:00#INFO####Offline#1429708585072003#127d6d6b-e9e6-11e4-8000-d25ebbb51773##com.sap.mobile.platform.server.mobilink.NativeLogger:doMessageLogged########447###<47> longValue bigint#
    #2.0#2015-04-23 07:25:10.88#+0:00#INFO####Offline#1429708585072004#127d6d6b-e9e6-11e4-8000-d25ebbb51773##com.sap.mobile.platform.server.mobilink.NativeLogger:doMessageLogged########447###<47> stringValue long varchar#
    #2.0#2015-04-23 07:25:10.88#+0:00#INFO####Offline#1429708585072005#127d6d6b-e9e6-11e4-8000-d25ebbb51773##com.sap.mobile.platform.server.mobilink.NativeLogger:doMessageLogged########447###<47> Table 'LODATA_SYS_PROPERTIES' is referenced by publication 'LODATA_DATA_PUBLICATION'#
    #2.0#2015-04-23 07:25:10.88#+0:00#INFO####Offline#1429708585072006#127d6d6b-e9e6-11e4-8000-d25ebbb51773##com.sap.mobile.platform.server.mobilink.NativeLogger:doMessageLogged########447###<47> Table #2: LODATA_SYS_REQUESTS, 4 columns#
    #2.0#2015-04-23 07:25:10.88#+0:00#INFO####Offline#1429708585072007#127d6d6b-e9e6-11e4-8000-d25ebbb51773##com.sap.mobile.platform.server.mobilink.NativeLogger:doMessageLogged########447###<47> requestName varchar(128) NOT NULL PRIMARY KEY#
    #2.0#2015-04-23 07:25:10.88#+0:00#INFO####Offline#1429708585072008#127d6d6b-e9e6-11e4-8000-d25ebbb51773##com.sap.mobile.platform.server.mobilink.NativeLogger:doMessageLogged########447###<47> definingRequest long varchar NOT NULL#
    #2.0#2015-04-23 07:25:10.88#+0:00#INFO####Offline#1429708585072009#127d6d6b-e9e6-11e4-8000-d25ebbb51773##com.sap.mobile.platform.server.mobilink.NativeLogger:doMessageLogged########447###<47> deltaLink long varchar#
    #2.0#2015-04-23 07:25:10.88#+0:00#INFO####Offline#1429708585072010#127d6d6b-e9e6-11e4-8000-d25ebbb51773##com.sap.mobile.platform.server.mobilink.NativeLogger:doMessageLogged########447###<47> refreshSubset bit NOT NULL#
    #2.0#2015-04-23 07:25:10.88#+0:00#INFO####Offline#1429708585072011#127d6d6b-e9e6-11e4-8000-d25ebbb51773##com.sap.mobile.platform.server.mobilink.NativeLogger:doMessageLogged########447###<47> Table 'LODATA_SYS_REQUESTS' is referenced by publication 'LODATA_DATA_PUBLICATION'#
    #2.0#2015-04-23 07:25:10.88#+0:00#INFO####Offline#1429708585072012#127d6d6b-e9e6-11e4-8000-d25ebbb51773##com.sap.mobile.platform.server.mobilink.NativeLogger:doMessageLogged########447###<47> Table #3: LODATA_SYS_COMMAND, 3 columns#
    #2.0#2015-04-23 07:25:10.88#+0:00#INFO####Offline#1429708585072013#127d6d6b-e9e6-11e4-8000-d25ebbb51773##com.sap.mobile.platform.server.mobilink.NativeLogger:doMessageLogged########447###<47> ID integer NOT NULL PRIMARY KEY#
    #2.0#2015-04-23 07:25:10.88#+0:00#INFO####Offline#1429708585072014#127d6d6b-e9e6-11e4-8000-d25ebbb51773##com.sap.mobile.platform.server.mobilink.NativeLogger:doMessageLogged########447###<47> commandID tinyint NOT NULL#
    #2.0#2015-04-23 07:25:10.88#+0:00#INFO####Offline#1429708585072015#127d6d6b-e9e6-11e4-8000-d25ebbb51773##com.sap.mobile.platform.server.mobilink.NativeLogger:doMessageLogged########447###<47> argument long varchar#
    #2.0#2015-04-23 07:25:10.88#+0:00#INFO####Offline#1429708585072016#127d6d6b-e9e6-11e4-8000-d25ebbb51773##com.sap.mobile.platform.server.mobilink.NativeLogger:doMessageLogged########447###<47> Table 'LODATA_SYS_COMMAND' is referenced by publication 'LODATA_DATA_PUBLICATION'#
    #2.0#2015-04-23 07:25:10.88#+0:00#INFO####Offline#1429708585072017#127d6d6b-e9e6-11e4-8000-d25ebbb51773##com.sap.mobile.platform.server.mobilink.NativeLogger:doMessageLogged########447###<47> authenticate_user <connection> (no script)#
    #2.0#2015-04-23 07:25:10.88#+0:00#INFO####Offline#1429708585072018#127d6d6b-e9e6-11e4-8000-d25ebbb51773##com.sap.mobile.platform.server.mobilink.NativeLogger:doMessageLogged########447###<47> authenticate_user_hashed <connection> (no script)#
    #2.0#2015-04-23 07:25:10.88#+0:00#INFO####Offline#1429708585072019#127d6d6b-e9e6-11e4-8000-d25ebbb51773##com.sap.mobile.platform.server.mobilink.NativeLogger:doMessageLogged########447###<47> authenticate_parameters <connection> (no script)#
    #2.0#2015-04-23 07:25:10.88#+0:00#INFO####Offline#1429708585072020#127d6d6b-e9e6-11e4-8000-d25ebbb51773##com.sap.mobile.platform.server.mobilink.NativeLogger:doMessageLogged########447###<47> modify_user <connection> (no script)#
    #2.0#2015-04-23 07:25:10.88#+0:00#INFO####Offline#1429708585072021#127d6d6b-e9e6-11e4-8000-d25ebbb51773##com.sap.mobile.platform.server.mobilink.NativeLogger:doMessageLogged########447###<47> begin_synchronization <connection> (no script)#
    #2.0#2015-04-23 07:25:10.88#+0:00#INFO####Offline#1429708585072022#127d6d6b-e9e6-11e4-8000-d25ebbb51773##com.sap.mobile.platform.server.mobilink.NativeLogger:doMessageLogged########447###<47> begin_publication <connection> (no script)#
    #2.0#2015-04-23 07:25:10.88#+0:00#INFO####Offline#1429708585072023#127d6d6b-e9e6-11e4-8000-d25ebbb51773##com.sap.mobile.platform.server.mobilink.NativeLogger:doMessageLogged########447###<47> begin_upload <connection> (no script)#
    #2.0#2015-04-23 07:25:10.88#+0:00#INFO####Offline#1429708585072024#127d6d6b-e9e6-11e4-8000-d25ebbb51773##com.sap.mobile.platform.server.mobilink.NativeLogger:doMessageLogged########447###<47> handle_UploadData <connection>#
    #2.0#2015-04-23 07:25:10.88#+0:00#INFO####Offline#1429708585072025#127d6d6b-e9e6-11e4-8000-d25ebbb51773##com.sap.mobile.platform.server.mobilink.NativeLogger:doMessageLogged########447###<47>  com.sap.odata.offline.scripts.ODataSyncHandler.handle_UploadData#
    #2.0#2015-04-23 07:25:10.88#+0:00#DEBUG####Offline#1429708585072026#127d6d6b-e9e6-11e4-8000-d25ebbb51773##com.sap.mobile.platform.server.mobilink.SessionLogger:debug########447###ML_SCRIPT Enter handle_UploadData: remoteID=127d6d6a-e9e6-11e4-8000-d25ebbb51773#
    #2.0#2015-04-23 07:25:10.88#+0:00#INFO####Offline#1429708585072027#127d6d6b-e9e6-11e4-8000-d25ebbb51773##com.sap.mobile.platform.server.mobilink.SessionLogger:info########447###Starting delta refresh#
    #2.0#2015-04-23 07:25:10.88#+0:00#INFO####Offline#1429708585072028#127d6d6b-e9e6-11e4-8000-d25ebbb51773##com.sap.mobile.platform.server.mobilink.SessionLogger:info########447###Store version: 0#
    #2.0#2015-04-23 07:25:10.88#+0:00#INFO####Offline#1429708585072029#127d6d6b-e9e6-11e4-8000-d25ebbb51773##com.sap.mobile.platform.server.mobilink.SessionLogger:info########447###Service root: http://xxxx.xxx.xx.com:80/com.mycompany.app#
    #2.0#2015-04-23 07:25:10.88#+0:00#DEBUG####Offline#1429708585072030#127d6d6b-e9e6-11e4-8000-d25ebbb51773##com.sap.odata.offline.smp.MLODataSMPConfig:getApplications########447###getApplications()#
    #2.0#2015-04-23 07:25:10.88#+0:00#DEBUG####Offline#1429708585072031#127d6d6b-e9e6-11e4-8000-d25ebbb51773##com.sap.odata.offline.smp.MLODataSMPConfig:getApplications########447###...getApplications()#
    #2.0#2015-04-23 07:25:10.88#+0:00#INFO####Offline#1429708585072032#127d6d6b-e9e6-11e4-8000-d25ebbb51773##com.sap.mobile.platform.server.mobilink.SessionLogger:info########447###Sending HTTP GET "http://xxxx.xxx.xx.com:80/com.mycompany.app/$metadata"#
    #2.0#2015-04-23 07:25:10.88#+0:00#INFO####Offline#1429708722954016#127d6d6b-e9e6-11e4-8000-d25ebbb51773##com.sap.mobile.platform.server.mobilink.NativeLogger:doMessageLogged########420###<47> Network protocol version check completed#
    #2.0#2015-04-23 07:25:10.88#+0:00#INFO####Offline#1429709254451016#127d6d6b-e9e6-11e4-8000-d25ebbb51773##com.sap.mobile.platform.server.mobilink.NativeLogger:doMessageLogged########430###<47> Request from "UL 16.5.1413" for: remote ID: 127d6d6a-e9e6-11e4-8000-d25ebbb51773, user name: ml_odata_user_01, version: ODATA_TO_ML#
    #2.0#2015-04-23 07:25:10.281#+0:00#INFO####Offline#1429773910281000#127d6d6b-e9e6-11e4-8000-d25ebbb51773##com.sap.mobile.platform.server.mobilink.NativeLogger:doMessageLogged########409###<47> Request from "UL 16.5.1413"#
    Request your help on this

  • How to start oracle database server and client in windows 8

    Hi at all
    I'm a new entry in this forum and I'm a beginner with database oracle.
    I used always SQL Server as database and it was easy to use after installation.
    With SQL Server configuration management program I could to launch the SQL Server (SQLEXPRESS) service and the database server start up!!
    With SQL Server management studio I could to launch the client application, then was establishing a connection to the server and all was working fine!
    Now, how to work with oracle database?
    I installed oracle server and client version 11g R2 on windows 8, but how can I start the server database? .. and how can I start the client application for querying?
    regards in advance.
    P.S.: Sorry for my english. 

    SomeoneElse
    thanks for the response.
    I setting the service to start manually because otherwise windows is slow to startup.
    In particular I have precisely this oracle service on my operating system after installation.
    - ) OracleVssWriterSYSDBA
    - ) OracleDBConsolesysdba
    - ) OracleJobSchedulerSYSDBA
    - ) OracleMTSRecoveryService
    - ) OracleOraDb11g_home1ClrAgent
    - ) OracleOraDb11g_home1TNSListener
    - ) OracleServiceSYSDBA
    What are the services that start the server and I have to launch?
    What is the client program in menu --> start -- > all program --> Oracle - OraClient 11g home..... that I have to use for querying database?
    thanks.

  • Data streaming between server and client does not complete

    Using an ad-hoc app, data streaming between server
    and client does not complete as it supposed to be.
    The process runs well in solaris 5.8, however under 5.9
    we have found the characters stream buffer length limitation
    is around 900 to 950 characters (by default we are using 3072
    characters).
    Example:
    - We are transfering HTML file, which will be displayed
    in the App client, with buffer=3072, the HTML only displayed / transfered
    as xxxxxxxx characters, but with buffer=900 the HTML is displayed properly,
    in this case, the only problem that we have is the file transfer will
    eventually longer than usual.
    - There is another case, where we have to transfer information (data) as stream
    to the client. A long data stream will not appear at all in the client.
    Any ideas why the change between 5.8 and 5.9 woudl cause problems?
    The current app-driver that we are using is compiled using Solaris 5.6,
    if possible we would like to have use of a later version, which is compiled using Solaris 5.9, do you think this will probably solve our problem?
    Thanks
    Paul

    Does this have anything to do with Java RMI? or with Java come to think of it?

  • Setup server and client

    I am new in Oracle, so have some question to ask.
    How to set up server and client Oracle in same pc? Can suggest any document?
    which version of Oracle will be recommend?
    I using VB as a front-end.

    Hi,
    Start reading TFM for your version(click)
    . choose your version
    . read cover to cover the "Concepts book"
    . read the developper books
    Advisable version certainly is the last one: Oracle 10g Release 2.
    Regards,
    Yoann.

  • VTP server and client setup in multiple switches

    I understand that we need to setup 1 vtp server and client to exchange trunking messages, to advertise and to updates. But when I have 4 switches connected in square formation, which 1 should I choose to become Server? Another senario, if I have distribution and core layer switches, where I should place my VTP server switch?
    Thanks.

    Disclaimer
    The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
    Liability Disclaimer
    In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
    Posting
    Not sure about VTPv3, but with earlier VTP versions, the only major difference between VTP servers and clients is, servers allow you to configure VLAN changes.  Both exchange VLAN database information with their immediate neighbors.  The real advantage of only having one VTP server configured, it avoids two people configuring two VTP servers at the same time, and creating an update conflict between them.  (NB: if you lose your only VTP server, you can promote a client to be a server.)

  • 9i installation (network problem b'n server and client

    Hi
    I installed 9i in windows 2003 server and client system (win xp). I configured listener.ora file in server and tns.ora file in client mechine. while trying to ping (i.e tnsping) i m getting follwoing errors in both systems.
    C:\>tnsping tns_tekhub3
    TNS Ping Utility for 32-bit Windows: Version 9.2.0.1.0 - Production on 13-DEC-20
    06 11:28:25
    Copyright (c) 1997 Oracle Corporation. All rights reserved.
    Used parameter files:
    f:\Orahome92\network\admin\sqlnet.ora
    TNS-03505: Failed to resolve name
    C:\>

    Hi,
    i made chages in sqlnet.ora file.
    C:\>lsnrctl services
    LSNRCTL for 32-bit Windows: Version 9.2.0.1.0 - Production on 14-DEC-2006 09:23:
    04
    Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
    Services Summary...
    Service "PLSExtProc" has 1 instance(s).
    Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Handler(s):
    "DEDICATED" established:0 refused:0
    LOCAL SERVER
    Service "tekhub" has 2 instance(s).
    Instance "tekhub", status UNKNOWN, has 1 handler(s) for this service...
    Handler(s):
    "DEDICATED" established:0 refused:0
    LOCAL SERVER
    Instance "tekhub", status READY, has 1 handler(s) for this service...
    Handler(s):
    "DEDICATED" established:1 refused:0 state:ready
    LOCAL SERVER
    Service "tekhubXDB" has 1 instance(s).
    Instance "tekhub", status READY, has 1 handler(s) for this service...
    Handler(s):
    "D000" established:0 refused:0 current:0 max:1002 state:ready
    DISPATCHER <machine: SERVER, pid: 3684>
    (ADDRESS=(PROTOCOL=tcp)(HOST=server)(PORT=1064))
    The command completed successfully

  • WSUS server and client configuration issues

    I just inherited WSUS from my predecessor (it was turned off because of a full disk) so I’m still learning how to use it. Turning it back on I changed where updates should come from, they were stored locally and now I’m pulling them down off of the Microsoft
    Update location. What I’m seeing is that I have a bunch of computers that WSUS “sees” but are showing “Failed or Needed” status. Unless I visit each machine and manually do the updates this status does not change. Additionally I have some client computers
    (Windows 7) that are not showing up as managed by WSUS. If I reading this right I’m running version Update Services 6.2.9200.16384 on Management Console 3.0 Version 6.2 (build 9200) on Windows Server 2012.
    How can I force WSUS to automatically update the “Failed and Needed” devices?
    How can I get those clients that are not being managed by WSUS to be managed?
    Some of the things that I have done so far on the server and clients are:
    Create a GPO (see attached for WSUS)
    wuauclt
    /detectnow
    wuauclt /reportnow
    wuauclt.exe /detectnow
    gpupdate /force after
    modifying the GPO
    I even ran the SolarWinds WSUS diagnostic (as a non-administrator) and got this as the output:
    # Solarwinds® Diagnostic Tool for the WSUS Agent # 1/23/2015
    Machine state
      User rights:  User does not have administrative rights (Administrator rights are not available)
      Update service status:  Running
      Background Intelligent Transfer service status:   
    Running
      OS Version:  Windows 8.1 Pro
      Windows update agent version:   7.9.9600.17489 (WU Agent is OK)
    Windows Update Agent configuration settings
      Automatic Update:    Enabled
      Options:  Automatically download and notify of installation
      Use WSUS Server: Not found (There is no such key)
      Windows Update Server:  Not found (There is no such key)
      Windows Update Status Server:  Not found (There is no such key)
      WSUS URLs are identical:  Values are empty
    WSUS Server Connectivity -- Connectivity check is impossible
    So, my questions are:
    What tool do I use to configure the client machine?
    How do I get WSUS to update my clients?
    Thanks
    Sam

    Steven,
    I'm pretty sure that this is not the right forum to discuss this in but just so we can close this case.
    On my computer I ran the command gpupdate /force I
    then rebooted my computer to make sure that the group policy would be updated. The first screen shot is from my domain controller and the second is from my computer. As you can see the Domain Controller has the correct settings but the local machine doesn't.
    Other parts of the DC GPO settings have worked so I'm somewhat comfortable that it is being propagated properly.

  • UCCX CAD,CSD and CDA Versions

    Does anyone know of a document which lists the CAD, CSD and CDA versions which are downloaded by default from UCCX. My UCCX version will 7.0(1) SR5, and I'm trying to determine this detail in advance of the install to satisfy the customers desktop SOE requirements. I don't think the desktop 'versions' are in synch with the UCCX app release version, hence the question..
    Thanks
    Bruce Wilkinson

    Hi
    The versions are listed on the compatibility sheet : http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_compatibility/matrix/crscomtx.pdf
    They're listed under CAD/CAD-BE/CSD Client Version on the second page for whichever version you are looking at. There's a new 'feature' in 8.0 and above where the version numbers will now apparently match...
    Regards
    Aaron
    Please rate helpful posts...

  • Try to use one comupter as both server and client

    Hello, everyone, I am just trying to use my own computer as both server and client to test some codes about networking. For example, use the sample code in java tutorial which is used to test Echo server(code is listed below). Is there anything I have to do to set my computer, such as set my hostname or something like that?
    I am a pure newbie. And the purpose of this question is to test some code including socket on one PC without connect to internet.
    I have tried to change the name "taranis" in the following code to the computer name of my own PC, but it doesn't work, and said: Couldn't get I/O for the connection to: (my computer name).
    import java.io.*;
    import java.net.*;
    public class EchoClient {
    public static void main(String[] args) throws IOException {
    Socket echoSocket = null;
    PrintWriter out = null;
    BufferedReader in = null;
    try {
    echoSocket = new Socket("taranis", 7);
    out = new PrintWriter(echoSocket.getOutputStream(), true);
    in = new BufferedReader(new InputStreamReader(
    echoSocket.getInputStream()));
    } catch (UnknownHostException e) {
    System.err.println("Don't know about host: taranis.");
    System.exit(1);
    } catch (IOException e) {
    System.err.println("Couldn't get I/O for "
    + "the connection to: taranis.");
    System.exit(1);
         BufferedReader stdIn = new BufferedReader(
    new InputStreamReader(System.in));
         String userInput;
         while ((userInput = stdIn.readLine()) != null) {
         out.println(userInput);
         System.out.println("echo: " + in.readLine());
         out.close();
         in.close();
         stdIn.close();
         echoSocket.close();

    Did you write the EchoServer and start it on your
    machine, listening on port 7?
    You can have the client and server running on the same
    machine or different machines, but they have to be
    separate pieces of software.
    Write a separate EchoServer class that starts up and
    listens on that port. Then start the EchoClient and
    make the connection.
    %yeah, I didn't wrote the EchoServer class. But I thought it is automaticly included and therefore has run once I start my computer.
    If I write a EchoServer class, then how should I set the host name of the EchoClient, just simply change "taranis" to my computer name (change "echoSocket = new Socket("taranis", 7);" to echoSocket = new Socket("(my comptuer name)", 7);"?

  • What is the difference between ojvm and client versions?

    Changing the java vm from client to ojvm result in the following error:
    Errormessage:
    java.lang.UnsatisfiedLinkError: no UniqueC in java.library.path
    Project Settings -&gt; Configurations -&gt; Development -&gt; Runner -&gt; Virtual Machine -&gt; ojvm FAILS
    Project Settings -&gt; Configurations -&gt; Development -&gt; Runner -&gt; Virtual Machine -&gt; ojvm      RUNS OK.
    Project Settings -&gt; Configurations -&gt; Development -&gt;Paths -&gt;Additional Classpath:
    C:\jars\xerces.jar;C:\jars\UniqueC.dll;C:\jars\log4j-1.2.8.jar
    What is the difference between ojvm and client versions? How can I make ojvm to find UniqueC.dll?
    Various version info:
    Output from program:
    java version:1.4.2_01
    java home:C:\programfiler\JAVA\2sdk1.4.2_01\jre
    java vm version:9.0.3.738 cdov
    Taken from JDeveloper Help About:
    Oracle IDE     9.0.3.10.35
    UML Modelers Version     9.0.3.9.4
    Business Components Version     9.0.3.10.7
    java.version     1.3.1_02
    java.vm.name     OJVM Client VM
    java.vm.version     9.0.3.738 o

    However, Adobe offers extra paid services to create PDF or to export PDF to other formats. You are not required to buy them, however.

  • [Solved] sqlite3: SQLite header and source version mismatch

    Is anyone else getting this error?
    $ sqlite3
    SQLite header and source version mismatch
    2009-09-11 14:05:07 b084828a771ec40be85f07c590ca99de4f6c24ee
    2012-03-20 11:35:50 00bb9c9ce4f465e6ac321ced2a9d0062dc364669
    I just performed a full system upgrade
    $ pacman -Syyu
    I tried re-installing:
    $ pacman -Rdd sqlite3
    $ pacman -S sqlite3
    I tried updating the shared library links (as suggested by a post):
    $ ldconfig
    None of the above steps helped...
    $ pacman -Qs sqlite3
    local/sqlite3 3.7.11-1
    A C library that implements an SQL database engine
    $ uname -a
    Linux mdt3 3.2.13-1-ARCH #1 SMP PREEMPT Sat Mar 24 09:10:39 CET 2012 x86_64 AMD Opteron(tm) Processor 6128 AuthenticAMD GNU/Linux
    Last edited by rWarrior (2012-04-25 21:03:38)

    Hi,
    I've got the same problem...
    SQLite header and source version mismatch
    2011-06-23 19:49:22 4374b7e83ea0a3fbc3691f9c0c936272862f32f2
    2012-03-20 11:35:50 00bb9c9ce4f465e6ac321ced2a9d0062dc364669
    Can u tell me how to fix it? This occured when I've unpacked sqlite-autoconf-3071100.tar.gz, entered into unpacked directory with terminal and used commands:
    ./configure
    make
    sudo make install
    sqlite3
    As u've said before the problem is with libsqlite3.so... So i've searched it in File System. And the result is:
    One file with name libsqlite3.so - /usr/local/lib
    Two files with name libsqlite3.so.0 One is here - /usr/local/lib and another here - /usr/lib/i386-linux-gnu
    Two files with name libsqlite3.so.0.8.6 One is here - /usr/local/lib and another here - /usr/lib/i386-linux-gnu
    So... can u tell me which one to delete (in which folder)? What to do next? I am newbie... so if it's possible tell in little steps.
    Thanks in advance.
    Best wishes,
    Teddy.
    Last edited by TeddyRO (2012-04-27 19:57:18)

  • I am using server and client systems when i am trying to open the browser in two or more machines it says that firefox is already running, i want to open the browser in all machines simeltaniously

    I am using server and clients machines in my office, here i want to open browsers in all systems simultaneously but i am unable open the browser, when i am trying to open the browser in the second machine it says that firefox is already open... pls. solve this problem
    Thank you

    You can't open one Profile more than once. You need a separate Profile for each browser on each PC that you open.
    https://support.mozilla.com/en-US/kb/Profiles

  • Force CORBA server and client to localhost

    Hi,
    i have to run an omg corba server and client via orbd on a single machine with win xp. The machine is connected to the network, but this is not relevant for the corba communication.
    I can now force the orbd to start at localhost. After starting server and client everything works well until disconnecting machine from network, because client and server are started at ip of network card.
    How can i force the client and server to use a localhost port for corba communication (client and server)?
    Hope anyone has an idea...
    br
    ralf
    P.S.: If I start the applications after disconnecting network everthing works.

    Resolved the problem myself.
    The correct property is a java system property:
    com.sun.CORBA.ORBServerHost=localhost
    If you set this property in your application before instanciating an ORB, the orb will be forced to run on the set value (in this case localhost). If you do not set this property the ORB will be started at the IP of your network card if it is active (connected to the network)...

  • Connection fails if server and clients are in different subnets

    Hello,
    our Volume License Manager (v2.1) is running in another subnets than the clients (All machines are running under Windows XP-SP2 without Domains or ADS, just workgroups).
    The server is in subnet A (192.168.42.0/24), all clients are located in another subnet  B (192.168.50.0/24).
    Routing is properly configured and is working fine, traffic to the specific hosts is not blocked by a firewall. We can ping every machine,
    open telnet connections to the NILM, everything works.
    But if the clients try to connect to the remote NILM (both local client NI License Manager and VLM port settings are correct)  their connection attempt always
    times out with error code "NILM10"
    (I already read the mentioned KBs, no solution has helped so far). This is true if clients and server are separated.
    For testing purposes, i plugged one client into the server's subnet (server's IP: 192.168.50.250, client 192.168.50.10)
    and it worked perfectly. Is there a reason why  server and client have to be on the same subnet or is it some other kind of problem that I am not aware of?
    Thank you.
    Thorsten

    Hello Thorsten,
    Did you add the server's domain to the client computer's DNS settings. To do this, complete the following steps on the client computer:
    1. Open Local Area Network Settings from the Control Panel (Start»Control Panel»Network Connections»Local Area Connection)
    2. Click the Properties button
    3. Select Internet Protocol (TCP/IP) from the list of network components
    4. Click the Properties button
    5. Click the Advanced button
    6. Change to the DNS tab
    7. Ensure Append these DNS suffixes is selected
    8. Click the Add button
    9. Enter the domain suffix of the license server and click Add
    10. Close any open dialog boxes, choosing OK and Close as necessary.
    (http://digital.ni.com/public.nsf/allkb/3AAF37CD7B89A2CD86257070005A075A?OpenDocument)
    Further you should check this KBs.
    Why is My NI License Manager Slow or Not Responsive with a Configured Network Server on Another Domain?
    http://digital.ni.com/public.nsf/allkb/27D6BD8116EF257A862572F2005C2181?OpenDocument
    How Can I Access NI Volume License Manager from a Different Network or Behind a Firewall?
    http://digital.ni.com/public.nsf/websearch/54E52C3F348B929786256DCD0056B19B?OpenDocument
    Regards,
    WolfgangZ

Maybe you are looking for

  • Creating a Purchase Order, is there any help out there?

    I am creating a purchase order for our sales team that can be utilized on iOS. I have two issues: 1) Some of our sales will be exempt and will need to be toggled off. How do you go about doing this while not destroying the end total? 2) Our sales tax

  • Customizing ODBC errors in OBIEE 11g

    Hi, I have a requirement where the user is expecting to see some Custom error messages instead of the Default ODBC errors OBIEE throws. Like the one below. Error generating view. Error getting cursor in GenerateHead   Error Details Error Codes: OAMP2

  • I donnt why my iphone is not working. I can not turn on my phone.

    I do not why my iphone 4 is not working.  also I can not turn on it. please help me. Thank you

  • Macbook Air and Netflix

    I can't stream Netflix. When I click "play" on Netflix, I get the Netflix error saying I need OSX > 10.4.8, > 1GB Ram, and Safari 3 or higher. I have all three: OSX 10.5.8, 2GB ram and Safari 5. My son has a Macbook pro and can stream Netflix with no

  • How to Start Archivelog for XE

    Hi Friends, I want to use RMAN backup for my 10gXE database so I need to start archivelog. I do the following: SQL> shutdown immediate; Database closed. Database dismounted. ORACLE instance shut down. SQL> startup mount ORACLE instance started. Total