Calc all script running since 20hrs in BSO

Hi All,
I have saved a new updated outline and executed the Calc All script....but i is running since 23hrs...i have noticed that my drive memory is decreasing...
please advice...
Regards,
Prabhas

Everything looks same...as prod..server...^^^What is the difference in size?
but i have noticed one thing here...db->edit properties->General checked : Aggrigate missing values which is unchecked in prod...
that is the reason why its taking this much time?
What will happen if i uncheck during the calculation ?^^^Aggregate Missing Values will tell Essbase to do just what it says -- aggregate #Missing up. If anything, it should make your calc faster and the final output smaller. When that is not checked, Essbase will not overwrite upper level blocks with #Missing if the children have #Missing values. This equals more upper level blocks and slower processing. Personally, I never use it.
If you uncheck it nothing will change. I believe you have to stop the database for it to take affect.
Are you sure that the compression method is the same if the drive space being used is more in dev than it is in prod? Could it be RLE in prod and Bitmap or None in dev?
I'm not going to address the speed issues you're seeing as that can be laid at the feet of hardware specs.
Regards,
Cameron Lackpour

Similar Messages

  • How would a calc all script look like for this outline

    I understand that
    When you perform a default calculation (CALC ALL) on a database, Essbase calculates the dimensions in this order:
    If both a dimension tagged as accounts and a dimension tagged as time exist, and if formulas are applied to members on the accounts dimension, Essbase calculates in this order:
    Dimension tagged as accounts
    Dimension tagged as time
    Other dense dimensions (in the order in which they are displayed in the database outline)
    Other sparse dimensions (in the order in which they are displayed in the database outline)
    Otherwise, Essbase calculates in this order:
    Dense dimensions (in the order in which they are displayed in the database outline)
    Sparse dimensions (in the order in which they are displayed in the database outline)
    but what would the calc srcipt look like for the below outline
    Dense 1 = 1822 (Accounts)
    Dense 2 = 32 (Periods)(Time)
    Sparse 1 = 12
    Sparse 2 = 10
    Sparse 3 = 17
    Sparse 4 = 21
    Sparse 5 = 22
    Sparse 6 = 7
    Sparse 7 = 79
    Sparse 8 = 761
    Sparse 9 = 1081
    Sparse 10 = 12140
    Thanks in advances
    Edited by: Next Level on May 18, 2012 1:43 AM

    No need to get excited, especially as you have already answered the question.
    As you wrote:
    If both a dimension tagged as accounts and a dimension tagged as time exist, and if formulas are applied to members on the accounts >>dimension, Essbase calculates in this order:
    Dimension tagged as accounts
    Dimension tagged as time
    Other dense dimensions (in the order in which they are displayed in the database outline)
    Other sparse dimensions (in the order in which they are displayed in the database outline)So Essbase will calculate, in listed order, the following dimensions:
    Accounts
    Period
    Years
    Subledger
    Company
    Region
    Division
    Ledger
    MfgCenter
    Business Center
    SubLedger
    As I and others have written, doing a CALC ALL on the above is not a great idea for a variety of reasons and I personally think this could likely be done pretty easily as an ASO database, but that's with just a hint as to what your requirements are.
    If you don't believe me (and I suggest that you do not for your edification) the above calc order is really easy to test. Create a copy of the database, clear it out, find one level zero intersection for all dimensions and do a lock and send/submit to get one block of data. Use the following commands in a calc script: SET UPDATECALC OFF; SET AGGMISSG ON ; SET MSG DETAIL ; CALC ALL ; That will show you (quickly) exactly what and in what order the database gets calculated. Just take a look at the application log.
    Regards,
    Cameron Lackpour

  • Calc All issue

    Hi All,
    I donno, normally how long it will take to run CALC ALL on a medium size data base. For me it takes for ever. Until now I never completed CALC All script successfully. Some times I waited for 8 hrs or more than that, I didn't see Calc all completed successfully message. Did anybody has this issue. Any help will be really appreciatable. I am really stuck here. Please give me some really good suggestion on this. Thanks in advance.

    Hi Prasad,
    There are many best practices , but ensure that your design part of the cube is perfect.
    Coming to the calculation part , if you are doing incremental data load , then use fix in the calculation script
    for ex; if you are loading data for the month of Mar08 to your already existing cube , then
    FIX (marc08)
    cal all
    --correct syntax, OK
    this way , you are not redndantly calculation for other part of the database.
    Secondly, take care of few members ,which have formulas.If you can make few as Dynamic calcs,then they wont participate in the caluclation ,rather those member formulas come active ,when a user retrieves.
    These are very few of them.
    Please revert ,for clarification
    Sandeep Reddy Enti
    HCC

  • Calc Scripts run a lot faster after I copy existing database

    Hi,
    I have user being setup as the Application Designer of the application and each time when he run scripts of the database, it takes a lot longer than myself (I'm the Supervisor). The database was built up from scratch, so it is not database copy version. Could this be user specific problem?
    Today, I create another copy of the database within the same application, create a new Scenario, load data, run multiple similar scripts and the time to run all scripts were alot faster when I run from initial database. Is this a coincidence or the performance has indeed improved?
    Your advice is much appreciated!
    Between, Im running on Essbase 7.1.3.0
    Thank you

    So are you saying you are the one to run the scripts after initial DB load?
    What are the index and page size before and after you run the scirpts?
    It is somewhat normal for the inital dataload and agg to run faster than subsequent runs of the agg, this is because typically inital data load is level 0 only members. The agg of the database will then create blocks for upper level members, thereby increasing the DB size. So there are more index entries, as well as blocks to parse thru.
    That being said, if there is considerable increase in agg time, there may be more to address (fragmentation, block size, dynamic calc on sparse members, etc).
    Robert

  • Upper-level Essbase data gets deleted on running CALC ALL

    Hi,
    We have a need to aggregate missing values (#Missing) to the parent level and so this is what we did. Go to EAS->Expand Essbase Servers->Expand the concerned application->Right-click on database->Edit->Properties and check the option to "Aggregate missing values". After doing this, we are having a peculiar issue when we execute "CALC ALL". We see that some of our upper-level data (non-level 0 data) gets deleted, and so we have to re-run all our business rules to calculate upper-level data. To be specific, we are having this issue of data going missing in accounting statements/reports such as Balance Sheet/Income Statement. In this reports, the rows are members of Account dimension (Dense) and the columns are members of Company dimension (Sparse). All other dimension are made POV. We did NOT have this problem when the 'Aggregate missing values' option was UNCHECKED. Does CALC ALL work differently when AGGMISS option is ON?
    We are using Hyperion Planning, Essbase and Financial Reporting (version 11.1.1.3).
    Thanks for any advice.
    Regards,
    ABG

    Hi John,
    Now that you mentioned your point about upper-level data, I double-checked the Account dimension members (for which the data was being deleted) and you are right that I am seeing a different behavior than I posted originally. Sorry about that. So this is what I am observing:
    The Account dimension has 'Balance Sheet' as one of the children. This member, 'Balance Sheet', has children: Cash, Receivables, Payables so on, and all children of 'Balance Sheet' are level 0 members. Now, we run calculation scripts to calculate the values of these members. These members form the rows of Balance Sheet report. After all the relevant calc script have been executed, I am running a script that has just CALC ALL in it. I am observing that the values of Cash, Receivables, Payables etc (level 0 children of Balance Sheet) are getting deleted when we have the option "Aggregate Missing Values" as checked in EAS.
    Then, I inserted SET AGGMISS OFF before CALC ALL in the script and now the values are intact! I am trying to understand why CALC ALL would delete those values when AGGMISS is ON?
    You said that most people do not use CALC ALL. What is the better alternative to aggregate the database then? Is it CALC DIM?
    Thanks and regards,
    ABG

  • CALC ALL EXCEPT MBR problems

    Is there an issue with the CALC ALL EXCEPT MBR command with certain members?I load data to members tagged with a UDA as "Direct Load" which should not be consolidated. The member that is being consolidated has an alias of "SSS" (it is in the accounts dimension and 0 level). I need to load data for each quarter in a year as well as the year itself. But when the calc script runs it overwrites the year member. I have tried the following but they do not work:CALC ALL EXCEPT MBR("SSS"); Result: SSS is still consolidated across the time dimension.CALC ALL EXCEPT MBR(@UDA("Accounts","Direct Load")); Result: Error message: "Invalid Calc Script syntax [CALC ALL EXCEPT MBR(@UDA]"Any ideas? We have Essbase Version 5.0.2 Patch 14. What else can be done to keep my direct loads from adding up across time?

    The EXCEPT MBR command excludes any Headcount calculations. It does NOT exclude other calculations such as dimension consolidation.If your Headcount member has a formula, Essbase will not calculate the formula. But it will take the existing values and consolidate them across the other dimensions.You probably have a situation where you do NOT have a formula on Headcount. If that is the case, then you want a calc script similar to this one:calc dim (XYZ);fix (@remove (@idescendants (XYZ), Headcount))calc all except dim (XYZ);endfixWhere XYZ is the dimension that contains the Headcount member.

  • My toolbar is missing and there is a button where it used to be that says "Please re-install the Toolbar" but when I click on it nothing happens? Also when I start Firefox I get a script running error how do I solve these issues?

    My toolbar is missing and there is a button at the top left that asks me to "Please re-install the Toolbar" but when I click on it nothing happens???
    Then when I start Mozilla I get a long delay before it launches and a script running error "A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script will complete.
    Script: chrome://tavgp/content/libs/include.js:595"
    How do I solve these issues???

    No idea - and you provide no clues
    what version of iPHoto do you have? Of the OS? is the iPhoto icon you are speaking of in the Dock?
    re-read your post and try to provide information using standard Mac terms since we can not see you or your computer and only have your worrds to let us try to help you
    Somehow my "IPhoto" icon now says "Preview".  When I click on "Preview" nothing opens up except the bar says Preview.  When I click on the Preview on the bar, a box opens up with different items, except when I click on any of them, there is nothing there.  The only thing that work is the "quit preview".  However, it is still there where my IPhoto icon should be.  I can't get into my IPhoto.  How do I get rid of this "Preview" and how did it end up taking over the IPhoto icon???
    If you go to your Applications folder and double click on iPhoto what happen?
    LN

  • Firefox freezes due to a script running. how can I stop it or fix it

    I keep having a script run when I am playing Face Book games Especially Battle Pirates and it freezes everything. What can i do to stop it? Or fix it so it dosen't freeze my game?
    This script runs over and over while I am playing Battle Pirates. Every time it runs it freezes the darn game and I have to click and click on the screen before a box pops up with a long string and asks if I want to stop the string. This is what it says:
    "A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script will complete."
    " Script:http://static.ak.fbcdn.net/rsrc.php/...tS5XVSwP/ks:42 "
    What is this and dose it need to run or is it a hacker messing with me and my FF browser ?
    When I'm in the middle of a battle screen and it freezes it messes me up. If I am in full screen when it freezes it throws me to another open Browser tab or out of full screen if i don't have another open.
    What is this? Something to do with FaceBook? A Hacker ? A BP game glitch. please help. This is driving me crazy. Imagine being in the middle of the best part of a BP battle and freeze.... then click click click i go and zoom to another open window away from the battle so i no longer have a view of the fight let alone control it or boom to non full screen and 1/2 the screen is obscured.
    It just happened again while I was typing this request for help. I have a window open with BP also and it took me there. HELP

    Hi knighterrant56,
    Have you looked at the Knowledge Base article [[Problems using Facebook in Firefox]]? There is a lot of good troubleshooting information in there. Please be sure to try all of the suggested steps. Each one is valuable and may be the answer to your issue.
    Hopefully this helps!

  • Is there any workaround at all to run PM7 on a Intel-based Mac?

    Dear friends:
    I have recently purchased a MacBook Pro and, before I did, I asked some questions to Apple about the possibility of having the software pre-installed, specifically, BootCamp and Classic, receiving the computer with a partition already made and requirements of the sort. Basically, Technical Support told me that they were not able to perform any of these tasks, although the person I have spoken to said to me that I could run PageMaker (I think he mentioned an update). After a couple of days researching, it appears that I have been misinformed. Unfortunately I have several hundreds of PageMaker files in archive, and I cannot afford to lose the ability to open them directly (I am a radical InDesign fan, I have used it since v.1.0). Does anybody know any workaround at all to run PageMaker 7 on a Intel-based Mac? Maybe some software to emulate the Classic? Maybe an upgrade or a third-party application? I cannot believe that MacOS supports Windows (in fact, I have installed Windows Vista) better than its predecessor Mac OS 9.2.2.
    Thanks a lot for your time,
    Eduardo Guarniz

    >Does anybody know any workaround at all to run PageMaker 7 on a Intel-based Mac?
    Well there are two ways. the best way is to have an old machine that boots OS9. If you don't have one, buy one. I found one for about $69 a few years ago I'm sure they are even cheaper now.
    There is some software called SheepShaver its supposed to run Classic apps on a Mactel. With all the problems of running PM in Classic (I would never use PM for production in Classic) Its probably even worse running on SheepShaver.
    Be smart get the old machine.

  • Front end application error after import script run successfully in R12

    Hi ,
    i got an exception in R12 environment.
    i developed one simple OAF page and deployed in apps import script run successfully.
    but when i am opening that page in Front end it will give an exception.
    That is
    Exception Details.
    oracle.apps.fnd.framework.OAException: Could not load application module 'tflsm.oracle.apps.po.per.server.TflsmAM'.
    ## Detail 0 ##
    JBO-30003: The application pool (cph-oadb-tst22.dk.flsmidth.netTST221543tflsm.oracle.apps.po.per.server.TflsmAM) failed to checkout an application module due to the following exception:
    oracle.jbo.JboException: JBO-29000: Unexpected exception caught: oracle.jbo.JboException, msg=JBO-29000: Unexpected exception caught: oracle.jbo.NoDefException, msg=JBO-25002: Definition tflsm.oracle.apps.po.per.server.TflsmAM of type ApplicationModule not found
         at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:2002)
         at oracle.jbo.common.ampool.ApplicationPoolImpl.useApplicationModule(ApplicationPoolImpl.java:2793)
         at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:453)
    ## Detail 0 ##
    oracle.jbo.JboException: JBO-29000: Unexpected exception caught: oracle.jbo.NoDefException, msg=JBO-25002: Definition tflsm.oracle.apps.po.per.server.TflsmAM of type ApplicationModule not found
         at oracle.jbo.pool.ResourcePool.createResource(ResourcePool.java:545)
         at oracle.jbo.common.ampool.ApplicationPoolImpl.prepareApplicationModule(ApplicationPoolImpl.java:2094)
         at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:1961)
    ## Detail 0 ##
    oracle.jbo.NoDefException: JBO-25002: Definition tflsm.oracle.apps.po.per.server.TflsmAM of type ApplicationModule not found
         at oracle.jbo.mom.DefinitionManager.findDefinitionObject(DefinitionManager.java:441)
    JBO-30003: The application pool (cph-oadb-tst22.dk.flsmidth.netTST221543tflsm.oracle.apps.po.per.server.TflsmAM) failed to checkout an application module due to the following exception:
    oracle.jbo.JboException: JBO-29000: Unexpected exception caught: oracle.jbo.JboException, msg=JBO-29000: Unexpected exception caught: oracle.jbo.NoDefException, msg=JBO-25002: Definition tflsm.oracle.apps.po.per.server.TflsmAM of type ApplicationModule not found
         at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:2002)
         at oracle.jbo.common.ampool.ApplicationPoolImpl.useApplicationModule(ApplicationPoolImpl.java:2793)
    ## Detail 0 ##
    oracle.jbo.JboException: JBO-29000: Unexpected exception caught: oracle.jbo.NoDefException, msg=JBO-25002: Definition tflsm.oracle.apps.po.per.server.TflsmAM of type ApplicationModule not found
         at oracle.jbo.pool.ResourcePool.createResource(ResourcePool.java:545)
    ## Detail 0 ##
    oracle.jbo.NoDefException: JBO-25002: Definition tflsm.oracle.apps.po.per.server.TflsmAM of type ApplicationModule not found
         at oracle.jbo.mom.DefinitionManager.findDefinitionObject(DefinitionManager.java:441)
    i will check all the class files and xml files of Application Module below top, all are there in the server top(below top)
    /u02/TST22/apps/apps_st/comn/java/classes/xxfls
    but i got the exception.
    is there any different structure in R12.
    i.ein the server top /u02/TST22/apps/apps_st/comn/java/classes/xxfls (Here my all class files in Binary mode and xml files in ASCII mode)
    only CLASS files are needed or XML files are also need.(i am moving all CLASS and XML files)
    could you please help me on this.
    Thanks with Regards,
    Muthu

    Muthu,
    This issue usually occurs when the AM.class file is not available at the given location. Try to find out on the server whether this
    tflsm.oracle.apps.po.per.server.TflsmAM exists.
    If still the problem persists then go for redeployement by deleting the existing one.
    Regards,
    Gyan

  • What actions should I take after seeing this script running @ startup today?  "ARDAgent\" to do shell script \"say quack\"'"

    STEPS TAKEN:
    Logged into Mac for first time today.
    Noticed a new individual file in Directory Library ".a.text". (Settings disply hidden system file/folders)
    File contained only the text "--purge".
    Meta data on file directed source to bash process run @ startup.
    Attached History command output.
    Disabled ARD for now.
    SETTINGS:
    All Sharing was Off. 
    Firewall was set to Block All Incoming Connections.
    Home network with no other active users at time.
    Upgraded to Mavs 10.9.2 last night.
    Do not use any file sharing or remote access into Mac.
    The SSH host attempts were my old Amazon EC2 instances.
    Appears to start bitcoin app and few databases.
    Worth noting I've been having tons of various issues last few months.
    Thanks.
    <POB> My CommandLine prompts. XXXX on locals.
    XXXXXX:~ Administrator$ export HISTTIMEFORMAT='%F %T '
    XXXXXX:~ Administrator$ history
    <POB> OUTPUT
        1  2014-02-27 17:23:35 rm -rf ~/.Trash/*
        2  2014-02-27 17:23:35 cd
        3  2014-02-27 17:23:35 .
        4  2014-02-27 17:23:35 ./
        5  2014-02-27 17:23:35 cd
        6  2014-02-27 17:23:35 lib
        7  2014-02-27 17:23:35 cd/
        8  2014-02-27 17:23:35  
        9  2014-02-27 17:23:35 ls
       10  2014-02-27 17:23:35 cd downloads
       11  2014-02-27 17:23:35 ls downloads
       12  2014-02-27 17:23:35 ls Downloads
       13  2014-02-27 17:23:35 find / -nouser -ls
       14  2014-02-27 17:23:35 find /~nouser -ls
       15  2014-02-27 17:23:35 ls
       16  2014-02-27 17:23:35 ls /library
       17  2014-02-27 17:23:35 /LaunchAgents
       18  2014-02-27 17:23:35 ls /LaunchAgents
       19  2014-02-27 17:23:35 ls /Automator
       20  2014-02-27 17:23:35 ls /KeyChains
       21  2014-02-27 17:23:35 sha
       22  2014-02-27 17:23:35 toop
       23  2014-02-27 17:23:35 top
       24  2014-02-27 17:23:35 dscl . -list /Users UniqueID
       25  2014-02-27 17:23:35 $ dscl -plist . readall /users
       26  2014-02-27 17:23:35 $ dscl . readall /users
       27  2014-02-27 17:23:35 $ dscl . readall /503
       28  2014-02-27 17:23:35 ls/Users
       29  2014-02-27 17:23:35 - dscacheutil -q group
       30  2014-02-27 17:23:35 cd
       31  2014-02-27 17:23:35 cd.
       32  2014-02-27 17:23:35 cd .
       33  2014-02-27 17:23:35 ls
       34  2014-02-27 17:23:35 ifconfig
       35  2014-02-27 17:23:35 ifconfig
       36  2014-02-27 17:23:35 ifconfig
       37  2014-02-27 17:23:35 config helper
       38  2014-02-27 17:23:35 config
       39  2014-02-27 17:23:35 ls
       40  2014-02-27 17:23:35 ssh awsXXXX
       41  2014-02-27 17:23:35 defaults write com.google.Keystone.Agent checkInterval 0
       42  2014-02-27 17:23:35 exit
       43  2014-02-27 17:23:35 exit
       44  2014-02-27 17:23:35 /var/log/secure.log
       45  2014-02-27 17:23:35 ssh awsXXXXXX
       46  2014-02-27 17:23:35 exit
       47  2014-02-27 17:23:35 kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
       48  2014-02-27 17:23:35 sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfi x|x)/{print $3}'
       49  2014-02-27 17:23:35 launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
       50  2014-02-27 17:23:35 ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta} * L*/Fonts 2> /dev/null
       51  2014-02-27 17:23:35 osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
       52  2014-02-27 17:23:35 top
       53  2014-02-27 17:23:35 ps
       54  2014-02-27 17:23:35 top
       55  2014-02-27 17:23:35 top
       56  2014-02-27 17:23:35 top
       57  2014-02-27 17:23:35 sudo /System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Resources/k ickstart -agent -stop
       58  2014-02-27 17:23:35 man who
       59  2014-02-27 17:23:35 who
       60  2014-02-27 17:23:35 whoami
       61  2014-02-27 17:23:35 ps -aux
       62  2014-02-27 17:23:35 ps
       63  2014-02-27 17:23:35 top
       64  2014-02-27 17:23:35 ps -eo pid,etime
       65  2014-02-27 17:23:35 top
       66  ??ps aux | less
       67  2014-02-27 17:23:35 pstree
       68  2014-02-27 17:23:35 ps -eo euser,ruser,suser,fuser,f,comm,label
       69  2014-02-27 17:23:35 pgrep
       70  2014-02-27 17:23:35 pgrep remote
       71  2014-02-27 17:23:35 apt-get install htop
       72  2014-02-27 17:23:35 htop
       73  2014-02-27 17:23:35 netstat -tulpn | grep :80
       74  2014-02-27 17:23:35 ls -l /proc/635/exe
       75  2014-02-27 17:23:35 swapon  -a
       76  2014-02-27 17:23:35 ma ps
       77  2014-02-27 17:23:35 man ps
       78  2014-02-27 17:23:35 man ps
       79  2014-02-27 17:23:35 ps -a
       80  2014-02-27 17:23:35 ps -A
       81  2014-02-27 17:23:35 whoami
       82  2014-02-27 17:23:35 ps -f
       83  2014-02-27 17:23:35 ps -G
       84  2014-02-27 17:23:35 ps -g
       85  2014-02-27 17:23:35 ps -T
       86  2014-02-27 17:23:35 ps-t
       87  2014-02-27 17:23:35 ps -v
       88  2014-02-27 17:23:35 ps start
       89  2014-02-27 17:23:35 top
       90  2014-02-27 17:23:35 ps
       91  2014-02-27 17:23:35 users
       92  2014-02-27 17:23:35 last
       93  2014-02-27 17:23:35 ls /var/log/wtmp*
       94  2014-02-27 17:23:35 last -f /var/log/wtmp.1
       95  2014-02-27 17:23:35 last -f /var/log/wtmp.0
       96  2014-02-27 17:23:35 ~/.bash_history
       97  2014-02-27 17:23:35 cat ~/.bash_history
       98  2014-02-27 17:23:35 ls /Automator
       99  2014-02-27 17:23:35 cat Automator
      100  2014-02-27 17:23:35 open ~/.bash_history
      101  2014-02-27 17:23:35 dscl . readall /users
      102  2014-02-27 17:23:35 ls/library
      103  2014-02-27 17:23:35 cd/library
      104  2014-02-27 17:23:35 cd..
      105  2014-02-27 17:23:35 cd
      106  2014-02-27 17:23:35 ls
      107  2014-02-27 17:23:35 cd Library
      108  2014-02-27 17:23:35 cd/Library
      109  2014-02-27 17:23:35 ls/Automator
      110  2014-02-27 17:23:35 toop
      111  2014-02-27 17:23:35 top
      112  2014-02-27 17:23:35 ifconfig
      113  2014-02-27 17:23:35 config helper
      114  2014-02-27 17:23:35 config
      115  2014-02-27 17:23:35 top
      116  2014-02-27 17:23:35 ps -a
      117  2014-02-27 17:23:35 ps -A
      118  2014-02-27 17:23:35 ps -aux
      119  2014-02-27 17:23:35 ps
      120  2014-02-27 17:23:35 getprocessforpid(677)
      121  2014-02-27 17:23:35 man ps
      122  2014-02-27 17:23:35 ps -U
      123  2014-02-27 17:23:35 ps -u
      124  2014-02-27 17:23:35 GetProcessPID(494)
      125  2014-02-27 17:23:35 GetProcessPID() q
      126  2014-02-27 17:23:35 GetProcessPID494
      127  2014-02-27 17:23:35 GetProcessPID 494
      128  2014-02-27 17:23:35 netstat -b
      129  2014-02-27 17:23:35 top
      130  2014-02-27 17:23:35 top
      131  2014-02-27 17:23:35 top
      132  2014-02-27 17:23:35 netstat -a
      133  2014-02-27 17:23:35 netstat -a | grep vnc | grep ESTABLISHED
      134  2014-02-27 17:23:35 top
      135  2014-02-27 17:23:35 netstat -a
      136  2014-02-27 17:23:35 top
      137  2014-02-27 17:23:35 top
      138  2014-02-27 17:23:35 netstat -a
      139  2014-02-27 17:23:35 ps -aux
      140  2014-02-27 17:23:35 netstat -a | grep vnc | grep ESTABLISHED
      141  2014-02-27 17:23:35 ps -aux
      142  2014-02-27 17:23:35 ps -A
      143  2014-02-27 17:23:35 ps -A
      144  2014-02-27 17:23:35 netstat -a | grep vnc | grep ESTABLISHED
      145  2014-02-27 17:23:35 netstat -a
      146  2014-02-27 17:23:35 top
      147  2014-02-27 17:23:35 top
      148  2014-02-27 17:23:35 netstat -a
      149  2014-02-27 17:23:35 netstat -a
      150  2014-02-27 17:23:35 netstat -a
      151  2014-02-27 17:23:35 q
      152  2014-02-27 17:23:35 top
      153  2014-02-27 17:23:35 top
      154  2014-02-27 17:23:35 sudo tmutil disablelocal
      155  2014-02-27 17:23:35 exit
      156  2014-02-27 17:23:35 top
      157  2014-02-27 17:23:35 top
      158  2014-02-27 17:23:35 top
      159  2014-02-27 17:23:35 top
      160  2014-02-27 17:23:35 top
      161  2014-02-27 17:23:35 top
      162  2014-02-27 17:23:35 neststat -n
      163  2014-02-27 17:23:35 netstat -n
      164  2014-02-27 17:23:35 netstat -n
      165  2014-02-27 17:23:35 ls
      166  2014-02-27 17:23:35 lsaf
      167  2014-02-27 17:23:35 cd ..
      168  2014-02-27 17:23:35 cd ..
      169  2014-02-27 17:23:35 cd ..
      170  2014-02-27 17:23:35 cd ..
      171  2014-02-27 17:23:35 ls
      172  2014-02-27 17:23:35 top
      173  2014-02-27 17:23:35 netstat
      174  2014-02-27 17:23:35 dscl . list/users
      175  2014-02-27 17:23:35 cd ~
      176  2014-02-27 17:23:35 dscl . list/users
      177  2014-02-27 17:23:35 dscl . list /users
      178  2014-02-27 17:23:35 dscl . list /groups
      179  2014-02-27 17:23:35 dscl . readall /users
      180  2014-02-27 17:23:35 netstat
      181  2014-02-27 17:23:35 netstat
      182  2014-02-27 17:23:35 whoami
      183  2014-02-27 17:23:35 ls
      184  2014-02-27 17:23:35 cd ..
      185  2014-02-27 17:23:35 cd ..
      186  2014-02-27 17:23:35 cd .
      187  2014-02-27 17:23:35 cd ..
      188  2014-02-27 17:23:35 ls
      189  2014-02-27 17:23:35 tree
      190  2014-02-27 17:23:35 cd Users
      191  2014-02-27 17:23:35 ls
      192  2014-02-27 17:23:35 cd Administrator
      193  2014-02-27 17:23:35 ls
      194  2014-02-27 17:23:35 cd ..
      195  2014-02-27 17:23:35 cd ..
      196  2014-02-27 17:23:35 cd ..
      197  2014-02-27 17:23:35 ls
      198  2014-02-27 17:23:35 cd Users
      199  2014-02-27 17:23:35 ls
      200  2014-02-27 17:23:35 cd Adminstrator
      201  2014-02-27 17:23:35 cd Administrator
      202  2014-02-27 17:23:35 ls
      203  2014-02-27 17:23:35 cd Downloads
      204  2014-02-27 17:23:35 ls
      205  2014-02-27 17:23:35 exit
      206  2014-02-27 17:23:35 whoami
      207  2014-02-27 17:23:35 ls
      208  2014-02-27 17:23:35 ls
      209  2014-02-27 17:23:35 cd Library
      210  2014-02-27 17:23:35 ls
      211  2014-02-27 17:23:35 cd Application Support
      212  2014-02-27 17:23:35 ls
      213  2014-02-27 17:23:35 cd ..
      214  2014-02-27 17:23:35 ls
      215  2014-02-27 17:23:35 cd ..
      216  2014-02-27 17:23:35 ls
      217  2014-02-27 17:23:35 cd pXXXXXXXX
      218  2014-02-27 17:23:35 ls
      219  2014-02-27 17:23:35 cd Library
      220  2014-02-27 17:23:35 whoami
      221  2014-02-27 17:23:35 sudo - Adminsitrator
      222  2014-02-27 17:23:35 ls
      223  2014-02-27 17:23:35 ls
      224  2014-02-27 17:23:35 sudo -
      225  2014-02-27 17:23:35 more /etc/hosts
      226  2014-02-27 17:23:35 scc ver
      227  2014-02-27 17:23:35 scc numprofiles
      228  2014-02-27 17:23:35 netstat -an |find /i "listening"
      229  2014-02-27 17:23:35 netstat
      230  2014-02-27 17:23:35 top
      231  2014-02-27 17:23:35 kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
      232  2014-02-27 17:23:35 sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfi x|x)/{print $3}'
      233  2014-02-27 17:23:35 launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
      234  2014-02-27 17:23:35 ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta} * L*/Fonts 2> /dev/null
      235  2014-02-27 17:23:35 osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
      236  2014-02-27 17:23:35 osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
      237  2014-02-27 17:23:35 top
      238  2014-02-27 17:23:35 dscacheutil -flushcache
      239  2014-02-27 17:23:35 sudo killall -HUP mDNSResponder
      240  2014-02-27 17:23:35 top
      241  2014-02-27 17:23:35 ./bitcoin-qt
      242  2014-02-27 17:23:35 cd $home
      243  2014-02-27 17:23:35 ls
      244  2014-02-27 17:23:35 cd ..
      245  2014-02-27 17:23:35 cd ..
      246  2014-02-27 17:23:35 cd ..
      247  2014-02-27 17:23:35 ls
      248  2014-02-27 17:23:35 cd Applications
      249  2014-02-27 17:23:35 ls
      250  2014-02-27 17:23:35 ./bitcoin-qt.app
      251  2014-02-27 17:23:35 top
      252  2014-02-27 17:23:35 ps -420
      253  2014-02-27 17:23:35 ps -9541
      254  2014-02-27 17:23:35 top
      255  2014-02-27 17:23:35 /Applications/Postgres93.app/Contents/MacOS/bin/psql ; exit;
      256  2014-02-27 17:23:35 /Applications/Postgres93.app/Contents/MacOS/bin/psql ; exit;
      257  2014-02-27 17:23:35 top
      258  2014-02-27 17:23:35 ps -a (2077)
      259  2014-02-27 17:23:35 ps -a2077
      260  2014-02-27 17:23:35 sudo launchctl unload -w /System/Library/LaunchDaemons/com.apple.metadata.mds.plist
      261  2014-02-27 17:23:35 top
      262  2014-02-27 17:23:35 on run
      263  2014-02-27 17:23:35 do shell script "osascript -e 'tell app \"ARDAgent\" to do shell script \"say quack\"'"
      264  2014-02-27 17:23:35 end run
      265  2014-02-27 17:23:35 ls -ls /System/Library/Filesystems/AppleShare/check_afp.app/Contents/MacOS/check_afp 2
      266  2014-02-27 17:23:35 sudo launchctl load -w /System/Library/LaunchDaemons/com.apple.metadata.mds.plist
    <POB> END

    I'm extremely unclear on exactly what's happening. You mention something about a script running at startup in your subject, but then never mention that again. What's going on there? Where are you finding that script?
    That script would suggest someone playing a joke on you, by making your computer say "quack" every time you start up. That's not indicative of malware.
    On the other hand, a hidden file as you describe is a common malware trick, though I'm not sure why it would only contain "--purge" - that isn't a complete command, as far as I know, and the purge command isn't likely to be used for malicious purposes anyway.
    Still, you do have some indication that you're using Bitcoin-related apps, and there has been some Bitcoin malware that has appeared recently. See:
    New CoinThief malware discovered
    Note that the post on MacRumors that you refer to in your second post is almost six years old, and references a vulnerability that was closed later in 2008. It's completely irrelevant to any modern system.

  • Missing from "Tools"- "Photoshop"-& all Scripts!

    When I select "Tools"->"Photoshop" and image processor and all scripts etc are missing. Not greyed out but completly gone!! Any suggestions?
    I am running CS@ on OSX10.4.6 I have reinstalled etc...
    Cheers Patrick

    Hi Patrick,
    This forum is for BridgeScripting and I'm not sure from the information you give that this is the correct forum for you.
    That being said let me offer the following.
    Make sure you have downloaded and installed all of the current updates. In Bridge click Help > Updates then download and install any available updates.
    Can you recall any changes that were done between the last good run and the now missing menu condition? Things like creating your own or modifying one of the existing Adobe Java Scripts.
    It would also be helpful to know if "Script Manager" is present under the Bridge menu (it will be the item right above Preferences).
    If this is not present then one of the startup scripts has encountered a problem and is blocking other scripts from loading.
    Cheers,
    O'Neal

  • Can't see my documents/pictures on all my devises since I update software to SO8

    can't see my documents/pictures on all my devises since I update software to SO8- Apple said the drivers are not updated on my Mac - that an update will coming soon to fix this problem - now I see an update to OS X Yosemite - but for the reviews/comments seems like this is not going to fix the problem it looks like is going to make it worse - seems like better not update it - I have problems already - any comments from anyone?

    Mac Pros don't run Classic operating systems.      Mac OS X 10.8 is Mountain Lion.      See options for data recovery here: http://discussions.apple.com/docs/DOC-1689

  • A job I have seen was running since 11 hours but in history its duration is 48 minutes only

    SQL Server agent 2008 :
    A job I have seen was running since 11 hours but in history its duration is 48 minutes only.is It possible.
    Thanks

    Check all the steps and how much time each step took...
    SELECT sj.name
    , sja.*
    FROM msdb.dbo.sysjobactivity AS sja
    INNER JOIN msdb.dbo.sysjobs AS sj ON sja.job_id = sj.job_id
    WHERE sja.start_execution_date IS NOT NULL
    AND sja.stop_execution_date IS NULL
    http://thomaslarock.com/2012/10/how-to-find-currently-running-long-sql-agent-jobs/
    Raju Rasagounder Sr MSSQL DBA

  • Maxl Script running Issue in Essbase 11.1.2.2

    Hi All,
    We have a Maxl Script which takes Level 0 Backup of the Database. We have migrated the apps to the new server 11.1.2.2 and this script is not running in the new server but it works fine in the Old Server.We have the code like this in the script
    REM $1 = USERNAME
    REM $2 = PASSWORD
    REM $3 = servername
    REM $4 = BSOAppName = RPSBSO
    REM $5 = BSODB_Name = RPSBSOD
    REM $6 = ASOAppName = RPSASO
    REM $7 = ASODB_Name = RPSASOD
    essmsh C:\Hyperion\Automation\MAXL\Backup_BSO.msh Username  password gvw3086-v.atlanta.hp.com  RPSBSO RPSBSOD RPSASO RPSASOD
    When i run the .bat script  an Fatal Error is shown under the above line saying
    MSH Fatal Error: Error Initializing localization module.
    I have changed all the path locations,server names etc according to the new environment in the script but the script is displaying error like above. Can any one help me on this.
    Regards,
    Naveen

    972698 wrote:
    Hi John Thanks for your post.
    I would like to give some more information like this is the script named BU_BSO_2.bat which is used for taking backup of individual application  RPSBSO,  and  it calls  Backup_BSO.msh script which is internally called in BU_SO_2.bat file as given below the command. What we do is we just run this BU_BSO_2.bat batch file where it executes  everything and places the backup in given path in the script. But actually  its giving error in executing only the given below line
    essmsh C:\Hyperion\Automation\MAXL\Backup_BSO.msh Username  password gvw3086-v.atlanta.hp.com  RPSBSO RPSBSOD RPSASO RPSASOD
    Error shown :   MSH Fatal Error: Error Initializing localization module
    And i went through your doc but they are the server  specific paths which we are not using in this script and this script runs fine in 11.1.1.
    Let me know if i can provide any more information.
    Regards,
    Naveen
    Try updating
    essmsh C:\Hyperion\Automation\MAXL\Backup_BSO.msh Username  password gvw3086-v.atlanta.hp.com  RPSBSO RPSBSOD RPSASO RPSASOD
    to
    startMaxl.bat C:\Hyperion\Automation\MAXL\Backup_BSO.msh Username  password gvw3086-v.atlanta.hp.com  RPSBSO RPSBSOD RPSASO RPSASOD
    If the location of startMaxl is not in the windows path variable you will need to either update the path variable or put the path in the script e.g.
    C:\Oracle\Middleware\user_projects\epmsystem1\EssbaseServer\essbaseserver1\bin\startMaxl.bat
    or C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient\bin\startMaxl.cmd
    Alternatively edit startMaxl and take the variable information out of it and put it in your script then you will be able to use essmsh.
    Cheers
    John
    http://john-goodwin.blogspot.com/

Maybe you are looking for