Calculate report execution start & end time (Not use SE30)

Dear all Abaper,
I am writing a report which recorded the execution start & end time
The following is a part of my coding.
Data : GV_ST_TIME LIKE SY-UZEIT. "START TIME
Data : GV_EN_TIME LIKE SY-UZEIT. "END TIME
START-OF-SELECTION.
GV_ST_TIME = SY-UZEIT.
END-OF-SELECTION.
GV_EN_TIME = SY-UZEIT.
WRITE: / 'START TIME:', GV_ST_TIME.
WRITE: / 'END TIME:', GV_EN_TIME.
Suppose the report has executed 5 second
from time : 00:00:00 to 00:00:05.
But in the output screen, the start time and end time always display the same time(00:00:05) if following the above coding.
However, if in the debugging mode, the start time and
end time will be different and really counted.
Does anyone know the reason and how to fix it if I don't wanna use SE30?
Thx in advance~

Hi boris,
1. minor problem
2. we have to REFRESH the time value
3. using GET TIME.
(Then it will work correctly)
4.
START-OF-SELECTION.
GET TIME.
GV_ST_TIME = SY-UZEIT.
END-OF-SELECTION.
GET TIME.
GV_EN_TIME = SY-UZEIT.
regards,
amit m.

Similar Messages

Calendar day start/end time not changing...

I don't know whether this is a bug in Calendar or I'm just missing something. I have my 'Day starts at' set to 8AM and 'Day ends at' set to 11PM in the preferences window, but the Calendar simply would not change and it's driving me crazy. I never had this problem with Mountain Lion, but since I updated to this new MacBook Pro with Mavericks it just wouldn't work.

Hi boris,
1. minor problem
2. we have to REFRESH the time value
3. using GET TIME.
(Then it will work correctly)
4.
START-OF-SELECTION.
GET TIME.
GV_ST_TIME = SY-UZEIT.
END-OF-SELECTION.
GET TIME.
GV_EN_TIME = SY-UZEIT.
regards,
amit m.

Logging start & end time of map execution

Hello,
I want to log start & end time of execution of my map (OWB 11g), so I've created a table for this purpose and I used it in every map that I want to log time, twice; First for logging start time, and second for end time.
I pass a constant with SYSTIMESTAMP value through my log table and also name of my map. but the problem is, both of my records' time (start & end) are very near to each other (difference is in milliseconds!) however my map takes time for more than 2 minutes! So, I've changed my map Target Load Order to: [log table for start time] + [Main tables of my map] + [log table for end time]. I've set my map Use Target Load Ordering option True, too.
Why it doesn't work? Is there any better solution for logging every map execution time in a table, or not?
Please help me ...
Thanks.

To do that, I have created a view that lists all processes that are running or finished. The view contains fields:
process_name
process_type (plsqlmap, plsqlprocedure, processflow, etc)
run_status (success, error, etc)
start_time
end_time
elapse_time
inserted
updated
deleted
merged
You could insert into your log table using select x from this view after every map, or, how I do it, is to insert into log table after every process flow. That is, after my process flow is complete I then select all of the details for the maps of the process flow and insert those details into my log table.
Here is the SQL for my view. This is for 10.2.0.3. For
CREATE OR REPLACE FORCE VIEW BATCH_STATUS_LOG_REP_V
AS
(SELECT PROCESS_NAME,
PROCESS_TYPE_SYMBOL,
(CASE
WHEN RUN_STATUS_SYMBOL IN ('COMPLETE_OK', 'COMPLETE') THEN 'SUCCESS'
WHEN RUN_STATUS_SYMBOL IN ('COMPLETE_FAILURE') THEN 'ERROR'
WHEN RUN_STATUS_SYMBOL IN ('COMPLETE_OK_WITH_WARNINGS') THEN 'WARNINGS'
ELSE 'NA'
END
) RUN_STATUS_SYMBOL,
START_TIME,
END_TIME,
ELAPSE_TIME,
NUMBER_RECORDS_INSERTED,
NUMBER_RECORDS_UPDATED,
NUMBER_RECORDS_DELETED,
NUMBER_RECORDS_MERGED
FROM OWB_RUN.RAB_RT_EXEC_PROC_RUN_COUNTS
WHERE TRUNC (START_TIME) >= TRUNC (SYSDATE) - 3)
ORDER BY START_TIME DESC;

Contract Value Calulation based on Start & End Time

Hello Friends,
My client is into Vessel Hiring & the Vessels are given on hire for fixed period (with clear start & end dates & time).
For the above scenario we have a Periodic Contract to BIlling cycle which generates Invoices for every month. while creating the Contract we enter Basic Price as Day-Rate (Calculation type in Condition - O - Quantity - Daily Prices)
Thus the system automatically calculates the Basic Price Condition value based on number of days in any month.
Now the issue here is the client wants system to take Start & End time into consideration. In the Contract header - Contract Data tab we have developed two additional fields (Z-Fields) that capture start time & end time for every Contract.
So, we want system to calculate the Basic Price Condition value based on the Contract start date + Contract Start time.
Example :
1. Contract start date - 25.03.2010 & Start time = 12:00 noon. Basic Price = Rs. 10,000 per day.
2. In the Monthly Invoice, system would calcualte the Basic Price as Rs. 70,000 (7 days i.e. 25.03.2010 to 31.03.2010)
But here the client wants system to consider Start Time & determine Value as Rs. 65,000 as the Contract started on 12:00 noon on 25.03.2010.
Can anyone tell me how to achieve this?
I guess we should develop some routine (in VOFM) & apply it in Pricing Procedures.
But can some expert guide me on the logic of the routine & exactly where to apply the same in Pricing Procedure...
Thanks,
Jignesh Mehta

Hi,
Develop routine and make combination
if start date is xyz and start ime is less that 12 then price is so on so
if date start date is xyz and satrt time is more that 12 then price is so on so.
Hello I am not ABAPer, still tried to suggest you,don't mind for my suggestion
Kapil

SCEP last quick scan end times not showing up in console

Hello
My company is using SCEP to protect our environment with SCCM 2012 R2. We have schedule quick scans to run at 2am on Sundays, but when we look at any device collection and add the column "Endpoint Protection Last Quick Scan End Time", no time appears
even if there is time in the "Endpoint Protection Last Quick Scan Start Time". I have checked the SCEP logs on both the SCCM server and on client machines but no errors occurring, I can see the job start but it doesn't end. If I look at SCEP
on the client machine, the scan appears to be happening on schedule. Is this a known issue with times not appearing or is there something that can be fixed? It does not appear to be affecting the scans but makes monitoring our environment more difficult.
Thank you,
Scott Jones

Query this view in your DB. (SCCM_EXT.vex_EP_AntimalwareHealthStatus) Do any of your start/end times show up here?
Best, Jacob I'm a PC.

Can't view time or change start/end time of clip

Using imovie '09 and have several events that I imported from .mov files. imovie displays the total length of the clip but when I run the cursor over the clip in the browser the little timer window that pops up says "Created:" followed by the date/time that it was originally imported from a camera into .mov format. Every other file that I've imported directly into imovie from a camera gives me the running time of the clip as I run the cursor through the clip. I've tried to adjust the clip's date/time but it won't let me create a start/end time - regardless of what date/time I put in it assigns the same date/time to the start and end of the entire clip and doesn't show any running time so I can't mark/note specific times in the clip that I want to later select. Not sure why this is happening with these specific clips that were imported from existing .mov files - possibly because these clips were originally imported onto a pc and converted into .mov files, then imported into imovie after that? I still have the original tapes so I could import to imovie from scratch but would prefer not have to to do that as this makes up 20 hours of vid. Any solutions?

You might get a better response to your question over in the iLife > iMovie community. This forum is iMovie for iOS so most visitors here are working on a different platform, and while some may know about both products, many won't, me included.
tt2

Adjusting Start / End Time on Apple TV

Hello everyone,
In iTunes, we have the ability to adjust the Start / End time of a song or video by right-clicking the media > Get Info > Options. Then when we playback the media the next time, it will use the settings to determine how far into the media it should start and stop. Is there any way for these settings to get passed through to the AppleTV?
- Thanks

I would also like an answer to this! The original Apple TV applied the custom Start and Stop times, however the new one ignores them and plays the whole video file! Very annoying! Any solutions out there?

Room Booking - unavailable if start / end time is :15 or :45

Hi all,
First apologies if this is in the wrong forum.
Due to the way our school day runs, we need to be able to book rooms from :15 and :45 (e.g. 10.15 to 11.15, 11.45 to 12.45).
You can change the start / end time manually but if you do the rooms do not show as available and the suggested times only work for :00 or :30.
Is there a way to change it so the rooms can be booked for a wider variety of times?
I've googled this endlessly and the only thing I can really find that might be applicable is changing the timeincrement but I think that only applies to the calendar view and the start / end time showing 15 minute increments instead of 30 as default but
does not have any impact on room availability.
Hopefully someone can help.
Thanks a lot

Hi Chris,
It is by design and we cannot change the time slot displaying. Your understanding would beappreciated.
Besided, it is recommended to add an End date for a recurrent meeting.
Refer to:
http://office.microsoft.com/en-us/outlook/HA011276781033.aspx
http://office.microsoft.com/en-us/outlook-help/best-practices-for-outlook-2007-HA010371521.aspx
Fiona Liao
TechNet Community Support

ITunes Match on Apple TV ignores my custom start/end times on tracks

Some of my tracks in iTunes have custom start/end times set (to cut out skits and stuff). These set start/end times are respected by all my iTunes Match devices (iPod and desktop iTunes) except my Apple TV.

Hey guys,
I ended up here for having the same issue. iTunes Match playing the song for 20 seconds or so on Apple TV and then giving me error message saying iTunes is currently unavailable. Try again later. No trouble shooting worked for me as it didn't for you either. After using my apple tv for several months and experiencing occasional glitches that are somewhat similar to this probelm I boiled it down to 2 possible reasons. 1) some kind of bug that is fixable with latest firmwares Apple releases. 2) problems with Apple's servers. My best guess for this particular problem is the server problems because everything was playing fine until yesterday (Saturday) and the current frmware was released few weeks ago. It is strangely coincedental that most glitches seem to appear over the weekends. About couple of months ago I tried to watch an episode from a show and it would tell me the show would be available to watch in 24 hours. The loading was painfully slow. The problem only lasted a weekend. I wouldn't be surprised if the problem disappears tomorrow although I might be wrong.

Moved media files relink with different start/end times

Hi all,
I'm really stuck here so any help would be greatly appreciated.
I've got a number of FCP projects which use media from one drive.
The drive containing this media is soon to be in use by another project so I have done a direct copy of all the media onto another drive using finder. Literally a drag and drop copy of the files.
However, when I re-open the project and relink to the 'new' files on the new drive I am getting multiple "different start/end times" errors causing all the edited clips to play from the wrong times.
How can I stop it changing the time code when doing this?
Thanks
YD

On closer inspection, this only seems to be affecting BWavs, if that helps at all?

Start/end times of songs

When listening to and/or shuffling music on my iPod, the songs randomly start in the middle and not in the beinning. Note that iTunes (7.5) automatically disables (unchecks) the start/end times of songs in their respective dialog boxes after "ok" is selected.

Dave,
You're stuck.
Unless you want to duplicate the song and then make your adjustments.
If it were me, I'd put the track I'm interested into GarageBand and cutting it down to just the bit I want and the send that version back to iTunes.
Matt

Start/End times in Custom Formula - OTL

Hi,
Is it possible to access the start,end times of a particular day in a custom OTL Fast-Formula ?
Can someone point me to any links for writing custom Fast-formula.
The [user/Impl Guide|http://download.oracle.com/docs/cd/B53825_07/current/acrobat/121hxtig.pdf] has very limited information on OTL custom Formula.
TIA,
VB

VB,
Look at the seeded time entry rule FF and that will provide you with a sample code which provides access to all the attributes of timecard.
--Shiv

Report execution start and end date/time

Hi All,
How can one find execution start and end date/times for all reports? Basically I am looking to see what reports were run on a day, when and how long it took for each to complete.
Thank you.
Denis

Hi,
The "eul5_batch_reports" holds the data about the scheduled report and if you don't have any so you will not have any data.
Take a look at "EUL5_QPP_STATS"
for example:
select
qpp.qs_doc_name,
qpp.qs_doc_details,
fu.user_name Ran_by,
qpp.qs_created_date Start_run,
qpp.qs_doc_owner Doc_owner,
qpp.qs_num_rows rows_fetch,
qpp.qs_est_elap_time estimated_time,
qpp.qs_act_elap_time Run_time,
qpp.qs_act_cpu_time Cpu_time
from eul_us.EUL5_QPP_STATS qpp,
fnd_user fu
where substr(qpp.qs_created_by,2,10)=fu.user_id
order by qs_created_date

Acrobat 9 STANDARD - Calculate Start/End Time

I've spent a couple hours searching the Internet, trying to figure out how to Calculate Total Hours from "Time In" and "Time Out fields". I do not know how to write script, though I've tried copying (and making minor edits to) a few different ones I found online. I thought I came close to victory once or twice with a generated total, but then it wouldn't recreate the calculation with new input... so all I got out of that was blurry vision and a headache. I am very new at creating even basic forms (I taught myself from YouTube), so please go easy on me!
I understand I have to format the Time in a certain way to allow a formula to calculate, then insert script for Time In/Out and Total.
Does anyone have a script I could use for this?
Where should I insert said script?(Custom format/Custom calculation?)
How should I format Time fields?
How on earth does anyone learn all this stuff?
***As I just learned, I do not have "document level functions" with Acrobat Standard.
Any help/advice/scripts would be greatly appreciated!

This is a very tricky problem. If you are running the timesheet for 24 a day coverage then you will need to write special keystroke and validation scripts to allow time from midnight to midnight since the provided time format only allows valid time entries for the day, from midnight to 11:59:59.999 pm or 23:59:59.999 since the next midnight would be the start of the next day.
One has to convert the time string to a JS date object and for time that includes the date for the time or split the time string into hours and minutes and adjust the hours as needed for times after 12:59:59.999 pm. Once the hours and minutes are obtained, one converts to either the minutes to hours and decimal hours and adds to the hours for the time in hours only or the hours to minutes added to the minutes so the time is in minutes.
Once all the times values have been reduced to a common unit the calculation is straight forward.
The final step would be converting the total time from the common unit to the hours and minutes format or converting the time to hours and decimal hours.
Since these calculations are repeated several times with just a value change it is possible to create functions to perform the conversion of the time strings to common unit value.
When one realizes that a field can have a value but display that value in a different format, the totaling of the daily time worked can be simplified to a simple totaling operation.
With Acrobat Standard the document level scripts can be placed in the open page action but if the PDF has more than one page one would want to add some script to only load the functions once.

Deploying a report to the end user without using Crystal Reports Server

Hello,
I'm using Crystal Reports Professional XI.
I finished creating a report that contains several subreports. Now it's time for me to deploy the report to the end user so that they can start running it. The company that I'm doing this consulting work for does not have Crystal Reports Server setup so what is the best approach to deploying this report to the end user? For now it would just be one user using the report but down the road there could be other people within his department that are running it as well.
if you have any questions or need additional information to answer my posting just let me know. Have a good day.
Regards,
Ting

Hi Ting,
I see now.... In older versions of CR like 8.5 there was a Deployment Wizard one could use to compile the report and runtime into an executable to run on an end users PC so that user could preview and refresh the reports.
That ability stopped as of CR 8.5 or earlier, I don't recall exactly now.
Yes, if they want to be able to run your report they will need to install a copy of Crystal Reports, then just send them your RPT file, they can then set Database location to their DB Source and then preview and refresh the report as required.
Or as mentioned use a third party app to do the same or write your own. It's quite simple to do and likely one of our samples applications is all you need with a few basic changes, report source and DB log on info would need to be updated.
As for licensing, the end user must purchase a copy of Crystal Reports to be able to use your application. Third Party app's would include the licensing mostly but check with them if you go that way.
The convenient part is if the users want to write their own reports they can.
And for your sake if you want to protect your reports the next version of CR has a read only RPT file format that all the user can do is preview and refresh the report. They can not edit it in anyway.
Thanks again
Don

Calculate report execution start & end time (Not use SE30)

Similar Messages

Maybe you are looking for