Calculated column in pivot table
How can I add a calculated column (Daily Average) in a pivot table like this?
"Product" in row and "Date" in column and a "Daily Average" column to the right.
Date1 Date2 Date3 +Grand Total Daily Average+
Product
click right mouse on column you will get duplicate column
in duplicate column propties you have option like aggreate avg apply it you will get result
regards
bethamsetty
Similar Messages
-
Calculation on two columns in pivot table
Hello all,
I have a view:
Dept Year Amount
Accounting $500 2010
Accounting $700 2011
Engineering $100 2010
Engineering $600 2011
and etc
pivot table:(data displayed side by side)
Dept: 2010 2011
Accounting $500 $700
Engineering $100 $600
Is there a way in pivot table to create additional column and do a calculation on that column? New column called 'Change' (actual calculation amount of 2010 minus amount of 2011 per each department). I see the feature which allows to duplicate the columns in pivot table. But this is it... no additional calculations.
Thank you in advance,
SonyaDeepak,
My "YEAR_NO' is already in the column area. Once I created 'calculated column' and entered formula '2011'-'2010' I got what I needed.
Thank you very much for the solution.
Sonya
In my view I also have column called EXPENSE. When, I added the 'calculated column' to 'YEAR_NO' with formula '2011'-'2010'. It created two calculated columns 1) after the EXPENSES and the other one after YEAR_NO. Is there a way to be specify to display the DIFFERENCE only once after the YEAR_NO??
Edited by: user8461308 on Dec 20, 2011 7:44 AM -
Calculated Percentage Columns in Pivot Table loose formating in Excel
I have a simple report built using pivot table ( OBIEE 11.1.1.5.0)
1 Metric and 1 dimension using pivot table. and I duplicated the metric column and change it to % column.(Show data as % of column). SO far so good. Below is the snapshot
http://tinypic.com/r/2s14xa9/7
Now i download the report in excel and all the % values are messed up . Below is how it looks
http://tinypic.com/r/bede90/7
I tried messing with data formats etc..nothing works.. I cannot add a custom column format to the metric column since it will impact the derived % column.
Is this a bug ?Any pointers ..
ThanksHi,
Follow up this SR:
SR 3-5060435331: Calculated Percentage Columns in Pivot Table loose formating in Excel
Workaround: (not sure may be give a try)
also give a try like below one then try to download it may work.
In that % column -->add the below statement in the Custom CSS section of the column properties:
mso-number-format:"\@"
Refer snapshot here:
http://i53.tinypic.com/a09kqv.jpg
This will treat the data in the column as text while downloading to excel, hence retaining any leading or trailing spaces.
Thanks
Deva -
Move position of calculated item in pivot table
Hi experts,
I have done the pivot table in the table above:
http://www.2shared.com/photo/MB3J5caU/image1.html
The item sum 2005-2006 is the sum of the value of commission amount for the years 2005 and 2006. I need to move this item after the value 2006, but i have not idea about how can i do this. By default it is dispayed at the end of the values.
Any ideas?
Thank you!!!!!!!Hi User,
1. Did you created any dummy column for the calculation purpose ?
Method1: Create a dummy column in criteria - in the Edit Forumale (write Sum(commission 2005 + commission 2006) ).
Already you have column's Comissions 2005 , comissions 2006 in criteria.
Now simply, move the Newly Created Dummy column in the criteria after/before as per ur requ. value 2006. ( By Dragging it )
2. If you have created the column sum2005-2006 in the pivot table.
Method2: I think you have value 2005 and value 2006 , sum 2005-2006 columns in pivot table.
In the pivot table, you can view 'measures' area where you will find value 2005, value 2006, sum 2005-2006 columnn's.
Simply, move the sum 2005-2006 columns in b/w value 2005 and value 2006 columns ( by dragging and dropping it )
Thank you.
Edited by: 831909 on Feb 28, 2012 6:10 AM -
Percentage of Total Count of Category in Raw Data Column in Pivot Table
I have normalized my data in Excel and I have a column: "question 1" and then a column for "gender" which has values as "female" and "male". I have created a pivot table for these two variables, "Gender" and
"Question 1". My values for Females and Males from the Gender data are presented within my pivot table. I want to present these numbers as percentages of Total "Females" and "Males" that are in the "Gender" column in
my master dataset. Pivot tables will only allow me to do %'s of data already in the pivot table
I am attempting to use Calculated Fields within Pivot Tables to resolve this. I do not want to create a separate column in my master data set, but rather, complete all calculations within the pivot tableThank you very much,
The steps you provided use the total "gender" within the pivot table as the "grand total".
If I have a binomial variable, "gender" with "male" as one of the variables, I need the grand total be the total male in the raw data.
Example: if there are 100 total males in the raw data for the column "gender"
and I construct a pivot table with a dependent variable which is a survey question and "gender" and 30 males "agreed" with the survey question and 20 females "agreed" with the survey question, your instructions for % of grand total would show 60% for
males who agree [males + females who replied to the survey question],
when, what I need is the total males in the raw data, 100, used as the total so that the percentage of males who answered "agreed" to the survey question is 30% of all males.
Thank you very much -
How to extend No. of columns for PIVOT table in BI Publisher Desktop
Hello Everyone,
I am using the Oracle BI Publisher Desktop to design the TEMPLATE for Oracle Reports.
I need to create the PIVOT table .In my PIVOT table I need to display 9 columns but when I tried to create PIVOT table by dragging 9 columns only first 4 columns are displaying in report.
Can anyone suggest me how can I increase the number of columns in PIVOT table?
Thank You.
Regards,
Guru.hi jim
if you carefully look inside the form field's you will find the logic of sort . if you remove that you will get the data without any sorting order.
else send me your template and xml to my email id i can look into that .
email : [email protected] -
Can you have a calculated column in a table not a view?
We have a table which contains a series of rows
Key Effective Date Value
1 10/Feb/2006 123
1 23/Oct/2006 456
...We have a requirement to store an indicator that tells us which row is the most current and what the end date of the preceding row was so that we get something along the lines of:
Key Effective Date Value Status End Date
1 10/Feb/2006 123 HISTORY 22/Oct/2006
1 23/Oct/2006 456 CURRENT NULL
...I can produce this result quite easily using the analytic function LEAD. My question is, is the answer to this problem to create a view over the table that includes the analytic function or is it possible to define a calculated column in a table that would populate/maintain this vale as part of a table definition?
And as I finish writing this I feel I've answered my own question but hey, there's no harm in asking how others have handled this kind of situation.
Cheers
RichardMy bias would be to create a view that did the calculation.
In theory, you could add those additional columns to a table and maintain the data via a set of triggers, but that would be substantially more complicated than the alternatives for little or no benefit.
A third option would be a materialized view. That might be easier to deal with if you want to have different indexing strategies for current and historical records or if the historical data is queried often enough and updated infrequently enough that it ends up being cheaper to do the calculation once during the update rather than every time the query is run.
A fourth option would be to use stored procedures to maintain the data and have that stored procedure expire the current row and add the new row.
Finally, you might consider version-enabling your table using Workspace Manager rather than writing your own code since Oracle has already written all this code for you.
Justin -
How can we modify the maximum no. of columns in pivot table ?
hi all,
How can we modify the maximum no. of columns in pivot table ?
do i need to change the nqconfig.ini or instanceconfig file or else?
thnx..A little search on the forum :
In the instanceconfig.xml add a <PivotView> element under <ServerInstance> if one does
not exist already.
Within the <PivotView> element add an entry that looks like:
<MaxCells>nnnnnn</MaxCells>
where nnnnnn is your desired limit for the maximum total number of cells allowed
in a pivot.
Warning: an excessively large number will cause more memory consumption and
slower browser performance.The details here :
Oracle BI EE (10.1.3.2): Maximum total number of cells in Pivot Table excee -
Using ODBC how do you identify a calculated column in a table?
I've a calculated column in my table. Is there a way to identify that column through ODBC functions? I need to identify the calculated column and make it read only. The function should support both SQL and Access databases. Please let me know if
there is a way to find out this column type.Hello,
You can refer to the following article which list some ODBC Scalar Functions which you can used in the T-SQL query statement.For example
SELECT {fn TRUNCATE( 100.123456, 4)};
-- Returns 100.123400
Reference:http://msdn.microsoft.com/en-us/library/bb630290.aspx
As per my understanding, there is no built in declarative support for read-only columns. You can try to create a UPDATE trigger to achieving this. Or you can create a view with derived column from the source table. And then users cannot
update this calculated column on the view.
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support -
Suppressing Columns in Pivot table when adding subtotal
Hi,
We have a dimension hierarchy like this:
Level 1 ---> Level 2 ---> Level 3
T ---> A ----> B1
T ---> A ----> B2
T ---> C ----> D
T ---> E ----> E
The report we are trying to build is of this format:
Row_Num --> Dimension --> Amount
1 --> B1 ---> 100
2 --> B2 ---> 50
3 --> A ---> 150
4 --> D ---> 75
5 --> C ---> 75
6 --> E ---> 100
When using Pivot table and subtotals, we are getting the report as below: (where for Dimension Value "E" there are two rows)
Row_Num --> Dimension --> Amount
1 --> B1 ---> 100
2 --> B2 ---> 50
3 --> A Total ---> 150
4 --> D ---> 75
5 --> C Total ---> 75
6 --> E ---> 100
7 --> E Total ---> 100
We do not want the subtotals to be calculated if Level 2 and Level 3 are the same.
Any ideas on how to achieve this?
Many Thanks,
SeetharamHi user7276913,
Are you sure you are using a Pivot Table view? Or are you using the standard table view?
In a pivot table, you can only have (n-1) sub-totals where n is the number of fields in your "Rows" section. So in your case you have two fields, so you can only have 1 sub-total. See my screen shot below where I have a similar situation:
!http://i47.tinypic.com/icux5y.png!
Note that in the screen shot only the first column has a summation and the second does not. This makes sense since a sub-total and the last column would be the same as the values being displayed in the "measures" section.
What you described in your post seems more like what I'm seeing in a standard table view
!http://i48.tinypic.com/34z12zp.png!
Based upon what I'm seeing in your sample report, it seems like you are missing some kind of line item number or transaction number or some field that uniquely determines a row. If you add this field into the pivot table you will get exactly what you want.
e.g. Pivot Table Rows = Customer # (with summation Enabled) , Document Type (Summation Enable), Line Number
Good luck and if you found this post useful, please reward points!
Best regards,
-Joe -
Wrong value with calculated item in pivot table
I have a report with 4 columns:
First Column are Department Dimension
Second Column is Actual value
Third Column is Previous value
Four Column is: ((Actual Value-Previous Value)/Previous Value))*100 that called Var
Then I do a pivot table and I have new calculated item: Department1/Department2 and I have wrong value in four column:
Department----------------------------------Actual-------Previous------Var
Dept1------------------------------------------18503--------16308--------13,5
Dept2-------------------------------------------3758---------3518----------6,8
(Calculated Item: Dept1/Dept2)--------4,92---------4,64------------*2* <---- This value is wrong...and it has to be: 6,03
Is possible to get the correct value???
Thank you very much!hi,
Create a logical column with ur calculation formula and make it as default agg rule in rpd and answers change it to server determined/server complex agg.I did the same it was working fine for me!!
Check this link
http://books.google.com/books?id=OnbYrkWa4RsC&pg=PA74&lpg=PA74&dq=%22server+complex+aggregate%22&source=web&ots=qxrpaFXmo2&sig=CxLOemzcOlvIiaQ_sQD4fPQotdM&hl=en&sa=X&oi=book_result&resnum=5&ct=result#v=onepage&q=%22server%20complex%20aggregate%22&f=false
thanks,
saichand -
Calculated item in pivot table - OBIEE 11g
Hi,
I need to display only the calculated items in my pivot table and I want to hide the other members. I am using OBIEE 11.1.1.5.0.
Is it possible to have different selection steps for different views.
Please help.
Thanks,
Prabhu S.Hi Dhar,
Thanks for your answer. I want to use section wise display in pivot table and need to show only the calculated members in the sections.
I need to hide other values of the particular section column.
Thanks,
Prabhu S. -
Row -level based calculations in OBIEE11g - pivot table
Hi Experts,
I have the report with the format.. Where Transaction Amount is my measure and Events is one of the dimension(Event type) and Time is another dimesion (Year & Month columns)..
Transaction Amount
JAN FEB MAR APR
Event Type Year
GMS(USD) 2010 16,304,853.61 14,430,768.37 15,208,584.75 12,958,012.50
2011 20,348,028.07 18,296,414.03 19,043,200.29 17,226,224.87
Inbound Rejects(USD) 2010 13,757.00 84.93 123.52 11.98
2011 101,670.48 6,658.78 2,240.56 3,135.09
Now I want to create a calculated rows % inbound rejects , the formula is Inbound Rejects(USD)(2011) /GMS(USD)(2011) and also simillar for 2010 year. How I can do this is OBIEE11g.
Thanks in Advance
S
Edited by: sivausin on Aug 26, 2011 7:22 AMHere there 5 tables.
CBI_BI_HDR- Primary header table(Level zero record) With BUSINESS_UNIT and INVOICE as key.
CBI_BI_HDR_STG- Level one (BUSINESS_UNIT,INVOICE and LINE_SEQ_NUMBER as key).
CBI_BI_LINE- Level One record (BUSINESS_UNIT,INVOICE and LINE_SEQ_NUMBER as key).
CBI_BI_AEDS_STG-Level two record( no need any information in this for report)
CBI_BI_SKU-Level two record(BUSINESS_UNIT,INVOICE,LINE_SEQ_NUMBER,WIDTH_SEQ_NUMBER, and SIZE_SEQ_NUMBER as key)
CBI_BI_SKU is the one i am try to get as Pivot in level 2.
for each WIDTH_SEQ_NUMBER and SIZE_SEQ_NUMBER there is DIM_CODE and SIZE_DESC in respectively in the table.Also qty for each size and dim code here.
so i want the result to be like this.But it is working problem here is it is return the same value for all billing line.I want only the key value relation ship in this pivot table.
BIlling LINE_SEQ_NUMBER=1
SIZE_DESC1(11) SIZE_DESC2(9) total
DIM_CODE1(M) 11 22 33
DIM_CODE2(W) 4 13 17
BIlling LINE_SEQ_NUMBER=2
SIZE_DESC1(11) SIZE_DESC2(9) total
DIM_CODE1(M) 11 22 33
DIM_CODE2(W) 4 13 17
Please send ur mail ID i will send the document. Here it is not allowing me to add XML. [email protected]
Regards,
Sabarinathan -
How to Display a Detailed Grand Total Column in Pivot Table
I have a pivot table that looks something like this:
I would like to display the 'Grand Total' column at the end so that it is separated by year, like this:
Is there a pivot table setting that would allow it to display this way? I've searched high and low but haven't found anything. I appreciate any help. Thanks!You can add a calculated item to the pivot table to display grand totals by year:
1. First, turn off grand totals for rows and columns (PIVOTTABLE TOOLS > DESIGN tab > Layout group > Grand Totals > Off for Rows and Columns)
2. Click on the Price List (Invoice) field in the pivot table (hidden above the
Member field?). You must click on the pivot table cell containing the field name for the entries "Member" and "Non-Member".
3. Add the calculated item (PIVOTTABLE TOOLS > ANALYZE tab > Calculations group > Fields, Items & Sets > Calculated item...
4. In the "Name:" box, type: Grand Totals
5. In the "Formula:" box, type: = Member + 'Non-Member'
6. Click the "Add" button, and then click "OK" -
Dashboard Prompt - Variable - Populate/Calculate column in Pivot Table
1. I have a need to store the values of three prompts (Year, Quarter and Month) in my dashboard prompt, So a 'column A' (calculated value/measure) can be dynamically populated in my pivot table based on the users chioce.
These prompts have to be multiselect prompts as the user may opt for 2 or more years/ quarters / months etc.
I don't think Presentation Variable would work as I have to use multiselect prompt, I have been trying Non-System Session Variables & dynamic repository variables- but could not get it to work. I am thinking only of using one of the three variables (session/dynamic/presentation) so far, is there a better way to tackle this?
Any help/pointers would be much appreciated, thanksI should clarify a little: our sales "process" is very simple (not really a process). We do not use Opportunities. We enter new Leads, and if we win the business, we convert them to a Contact. Thus, our "win %" is simply the number of converted Leads divided by the total Leads for a given period. In my table I would like to display the % of Leads for a given period that are converted to Contacts.
Thanks again.
Maybe you are looking for
-
IOS 7.0.3 will not correctly "manually manage music and videos" any more?
So, on all my iOS devices, I have always used "Manually manage music and videos" to drag albums from my iTunes library to my iPhones. I then use iTunes to delete the albums and replace them with others (I have a lot of music). With the iOS 7.0.3 upda
-
I created a new folder on "My Pictures" on my PC to sync some new photos, but when I went into my device to sync the new folder I created I couldnt find the new folder under "selected folders" in the sync photo section. How could I make it a choice t
-
Full depreciation for low value assets
Hi Gurus, How to set up depreciation key of low value assets to get asset fully depreciated irrespective of depreciation start date. For example : Asset No : xxxxxxx xx APC : 5000 INR Dep. Key : xxx (100% Depreciation) O.Dep.Start Date : 14/05/
-
How to restore certain files on an iPad?
I wish to restore, on my iPad, some Tunein files from a iTunes backup, that got lost because of a failed "upgrade" for Tunein (recordings). Is this possible, & if so, could someone please direct me to information as to how? Thanks. h
-
How much to fix a cracked screen?
.