Calculating the no. of CVCs
Hi,
We have 15 products and each have about 10 SKUs. There are 4 Plants and 12 DCs. Can I calculate the number of CVCs I may have? Is there any other information that is needed to calculate potentially how many CVCs we would be having?
I appreciate any links.
Thanks.
Hi Visu,
With the numbers that you give us, the greatest number of cvc's that you can obtain, if you use all of them as a characteristics, is 15x10x4x12= 7200
The only way that i know to approximately calculate the number of CVC's is knowing all the characteristics that you are going to use and the possible values of each.
If you want to reduce the number of CVC's, check if some characteristics have relations n:1, if so, you can use this characteristic as a navigational attribute.
I hope this can help you.
Regards.
Marín.
Similar Messages
-
The attached file is work inprogress, with some dummy data sp that I can test it out without having to connect to equipment.
The second tab is the one that I am having the problem with. the output array from the replace element appears to be starting at the index position of 1 rather than 0 but that is ok it is still show that the new data is placed in incrementing element locations. However the main array that I am trying to build that is suppose to take each new calculation and place it in the next index(row) does not ap
pear to be working or at least I am not getting any indication on the inidcator.
Basically what I am attempting to do is is gather some pulses from adevice for a minute, place the results for a calculation, so that it displays then do the same again the next minute, but put these result in the next row and so on until the specifiied time has expired and the loop exits. I need to have all results displayed and keep building the array(display until, the end of the test)Eventually I will have to include a min max section that displays the min and max values calculated, but that should be easy with the min max function.Actually I thought this should have been easy but, I gues I can not see the forest through the trees. Can any one help to slear this up for me.
Attachments:
regulation_tester_7_loops.vi 244 KBI didn't really have time to dig in and understand your program in depth,
but I have a few tips for you that might things a bit easier:
- You use local variables excessively which really complicates things. Try
not to use them and it will make your life easier.
- If you flowchart the design (very similar to a dataflow diagram, keep in
mind!) you want to gather data, calculate a value from that data, store the
calculation in an array, and loop while the time is in a certain range. So
theres really not much need for a sequence as long as you get rid of the
local variables (sequences also complicate things)
- You loop again if timepassed+1 is still less than some constant. Rather
than messing with locals it seems so much easier to use a shiftregister (if
absolutely necessary) or in this case base it upon the number of iterations
of the loop. In this case it looks like "time passed" is the same thing as
the number of loop iterations, but I didn't check closely. There's an i
terminal in your whileloop to read for the number of iterations.
- After having simplified your design by eliminating unnecessary sequence
and local variables, you should be able to draw out the labview diagram.
Don't try to use the "insert into array" vis since theres no need. Each
iteration of your loop calculates a number which goes into the next position
of the array right? Pass your result outside the loop, and enable indexing
on the terminal so Labview automatically generates the array for you. If
your calculation is a function of previous data, then use a shift register
to keep previous values around.
I wish you luck. Post again if you have any questions. Without a more
detailed understanding of your task at hand it's kind of hard to post actual
code suggestions for you.
-joey
"nelsons" wrote in message
news:[email protected]...
> how do I create a 1d array that takes a single calculation and insert
> the result into the first row and then the next calculation the next
> time the loop passes that point and puts the results in thsecond row
> and so on until the loop is exited.
>
> The attached file is work inprogress, with some dummy data sp that I
> can test it out without having to connect to equipment.
> The second tab is the one that I am having the problem with. the
> output array from the replace element appears to be starting at the
> index position of 1 rather than 0 but that is ok it is still show that
> the new data is placed in incrementing element locations. However the
> main array that I am trying to build that is suppose to take each new
> calculation and place it in the next index(row) does not appear to be
> working or at least I am not getting any indication on the inidcator.
>
> Basically what I am attempting to do is is gather some pulses from
> adevice for a minute, place the results for a calculation, so that it
> displays then do the same again the next minute, but put these result
> in the next row and so on until the specifiied time has expired and
> the loop exits. I need to have all results displayed and keep building
> the array(display until, the end of the test)Eventually I will have to
> include a min max section that displays the min and max values
> calculated, but that should be easy with the min max function.Actually
> I thought this should have been easy but, I gues I can not see the
> forest through the trees. Can any one help to slear this up for me. -
I would like to know how i can create a bell graph with out using sub VIs, the data that i created consists in 500 readings with values of 0 to 100, i calculated the mean value and standard diviation. I hope some one can help me
Here's a quick example I threw together that generates a sort-of-bell-curve shaped data distribution, then performs the binning and plotting.
-Kevin P.
Message Edited by Kevin Price on 12-01-2006 02:42 PM
Attachments:
Binning example.vi 51 KB
Binning example.png 12 KB -
Error while calculating the net present value
Dear experts,
Please help me in solving the following error.
I am trying to do project vaibility analysis through pre investment analysis in appropriation request, interm I'm trying to calculate the IRR for the project.
I have created the appropriation request and given all the data in that including the planed values for the project.
In Variants tab of appropriation request, preinv. analysis sub tab, i have clicked the button Calculate preinvestment analysis figures , ( I hvae not mentioned any values in that screen, its picking the plan cost from the planed values of the appropriation request) there I'm getting an error saying
Error while calculating the net present value
If I open the message it is as follows:
Error while calculating the net present value*
*Message no. AO215*
Diagnosis
An error occurred during calculation of the net present value.
The yield curve for determining the net present value is not completely maintained. Possible causes are:
1. Evaluation type IM01 does not exist (table ATSYC).
2. Yield curve types 9990 (bid) and 9991 (ask) have not been created (table JBD14) for the currency of the controlling area of the appropriation request.
3. Reference interest rates have not been created for the yield curves (tables T056R and JBD15).
4. Interest rates are not maintained for the complete planning time period for the reference interest rates.
5. Under certain circumstances, the standard exchange rate types 'G' and 'B' may be inconsistent.
Procedure
Check your Customizing settings:
1. SAP supplies the evaluation types.
Remember, SAP supplies the evaluation types in client 000. You have to copy them into your working clients. If you do not have them in your system, you can create them in Customizing for the Treasury component (Treasury Management -> Market Risk Management -> Evaluations -> Define Default Settings). Create evaluation type IM01 with bid yield curve type 9990 and ask yield curve type 9991.
2. In Customizing for appropriation requests (under Planning), create a bid yield curve type 9990 and an ask yield curve type for the currency of the controlling area of the appropriation request.
3. Create at least one reference interest rate for each yield curve.
4. Maintain the reference rates, starting at the minimum fron the point at which you you have planned costs or revenue.
5. Check Customizing of the exchange rate types 'G' and 'B' in the IMG under Global Settings -> Currencies.
I have checked all the procedures of the said customization and the values are similar to that of the error message, but still I'm unable to proceed further.
I have goe through the note 160375, but did not succeed on this issue.
Can any one help me out in solving the above error and also can any one explain me the process in SAP to calculate IRR?
Is there any more customization missing or whats wrong going in that process?
Please help me out...
Thanks in advance..
Regards,
Praveen.Are you installing a Demo version of NetWeaver? If so please post your questions and search for answers here: SAP NetWeaver Application Server
If this a real full blown system please contact the OSS, via the Marketplace (service.sap.com) or by OSS transaction in your SAP System. -
Purchase Order condition isn't calculating the value of refundable tax
Hello Experts,
When i am inputting tax in invoice tab at item level footer in Purchase Order, and after that when i am calculating the taxable and the total amount the condition tab isn't displaying the tax value, the condition type is NAVS of tax in condition tab. Kindly suggest me i want to calculate tax.
Thanks
HarmandeepHi flora
Just get through the sequence .
see the table fields ...
1. From EKKO table take an entry which is having pricing conditions.
Now in the fields list check out for field EKKO-KNUMV(document condition number).
2.Take this condition number and now goto table KONV.
Give the document condition number in the field KONV-KNUMV and execute .
This will lead to a list of document condition numbers and some other fields .
3.Now check for field KONV-KNUMH ,KONV-KAWRT(quantity) and note the value KONV-KWERT .
(Remember this is at header level).
This is ur condition record number.
**comments
Now from document condition number we got the condition record number (KNUMH).
4. now since u want the item level tax procedure go to table KONP and give the condition record number and execute .
This will give u a list of details .
Now concentrate on KONV-KAWRT (scale quantity) KONP-KBETR(rate) as this table will store Pricing per UNIT so product of these two will give u the total pricing tax, for a particular condition type say PR00 .
For that particular condition item .
Check the pricing procedure .
See t-code VK13 and check the pricing procedure .
From me23 check the same PO num select the item and check the pricing conditions applicable .
Select a particular pricing and goto condition->analysis->analysis pricing ,
Better take help of a SD functional consultant in the process.
regards,
vijay. -
Calculating the sum based on condition
Hello Everybody,
I am currently working on a report, where i have to calculate sum on transaction amount for all account numbers. Below is the example of data.
masteraccount accountno transaction amount
1001 001 50000000
1001 002 50000000
1001 003 50000000
1002 004 98765
1002 005 98765
here i have to calculate the sum of transaction amount based on distinct master account.
Thansk
Ramcreate a group for master account
use manual running totals.
RESET
The reset formula is placed in a group header report header to reset the summary to zero for each unique record it groups by.
whileprintingrecords;
Numbervar X := 0;
CALCULATION
The calculation is placed adjacent to the field or formula that is being calculated.
(if there are duplicate values; create a group on the field that is being calculated on. If there are not duplicate records, the detail section is used.
whileprintingrecords;
Numbervar X := x + ; ( or formula)
DISPLAY
The display is the sum of what is being calculated. This is placed in a group, page or report footer. (generally placed in the group footer of the group header where the reset is placed.)
whileprintingrecords;
Numbervar X;
X -
Problem in calculating the Average Daily Requirement
Hello all,
I didn't understand how the system calculates the average daily requirement in Dynamic Safety Stock process. The following process flow in given in SAP notes to find how the system calculates the average daily requirement:
1. The system uses the defined parameters to determine the number of days used for calculating the average daily requirements. If the period is defined as a week, the period length as standard days (5 days) and the number of periods as 2, the system divides the total of the requirements by 10 days.
2. The system then calculates the total of the requirements for this period.
The system takes into account all requirements in the current period, even requirements that lie in the past but are still in the current period. For example, if the planning run is carried out in the middle of the month, then those requirements that were planned at the beginning of the month are also included in the calculation of the average daily requirements.
3. The average daily requirement is calculated using the formula:
Requirements in the specified number of periods / Number of days within the total period length
I have run MRP on 02/23/2009 and the following results are generated in stock requirement list of the component part:
Date Dependent Requirement MMSA Schedule Lines Quantity
3/3/2009 10 31
3/11/2009 20 20
3/31/2009 30 30
4/14/2009 40 49
4/22/2009 50 50
4/29/2009 60 60
5/11/2009 70 55
5/21/2009 80 80Hi,
In addition to my previous reply,
If you did following setting -
Range of coverage in first period -
min - blank
tgt - 7
max - blank
number of periods - blank
The system will calculate the safety stock for 7 days for each period; i.e., 7*3=21 and it will generate plnd orders as
week1 = 51
week2 = 14+21 = 35
week3 = 10+21 = 31
week4 = 30+21 = 51
If you want to restrict your calculation till 2 periods then make following settings -
Range of coverage in first period -
min - blank
tgt - 7
max - blank
number of periods - 2
Range of coverage in second period -
Make all blank
Range of coverage in the rest of the horizon -
min - blank
tgt - 3
max - blank
It means for first two weeks the safety stock will be 21 (equivalent to 7 days) and for rest of the horizon it will be 3*3 = 9 (equivalent to 3 days)
The Plnd orders will be -
week 1 = 51
week 2 = 35
week 3 = 14+9 = 23
week 4 = 30+9 = 39
and so on.
Regards,
Amol -
Calculating the size of the database in memory
Hi,
I am using BDB 5.1.19 with BTREE as an access method.
I would like to calculate the memory footprint that would be needed for that.
I followed the following doc:
useful-bytes-per-page = (page-size - page-overhead) * page-fill-factor
bytes-of-data = n-records *
(bytes-per-entry + page-overhead-for-two-entries)
n-pages-of-data = bytes-of-data / useful-bytes-per-page
total-bytes-on-disk = n-pages-of-data * page-size
I am not interested in calculating the size on disk but just in memory.
Would the following be enough:
bytes-of-data = n-records *(bytes-per-entry + page-overhead-for-two-entries)
Since the rest is only for space on disk i don't need it, is that correct?
Would this calculation help me also to calculate the cache size or is the cache size influenced by the page size?
Thx.This is not a replication question and those of us monitoring this forum are not the best people to answer this question. You'll probably get a better and faster answer if you post it to the general Berkeley DB forum:
Berkeley DB
Paula Bingham
Oracle -
Auto check calculating the Average
I do not know how to approach an issue with my form, so any help or quide will be appreciate very much!
For a Performance Form I have 5 sections for the managers to fill in.
Every section includes an Assessment drop down list with 5 items to select from.
Items for DDList (Named:Assessment):
Outstanding
Exceeds Expectations
Meets Expectations
Needs Improvement
Does Not Meet Expectations
Final at the end of the form I have a section named
OVERALL SUMMARY OF PERFORMANCE with 5 check boxes named:
Outstanding
Exceeds Expectations
Meets Expectations
Needs Improvement
Does Not Meet Expectations
Is it possible with a script(Calculating the average?), AUTO to check(one of the check boxes for the Overall sum of performance?
THANK YOU
Hi Niall, I took your advise form your last sample cindle you have send me, I am close but still I have a problem at the end of the line!
Here what I have till now:
On change event for the Area1 the script below:
switch
(xfa.event.newText){
case
"Outstanding":
NumericField1.rawValue
= "5";
break
case
"Exceeds expectations":
NumericField2.rawValue
= "4";
break
case
"Meets expectations":
NumericField3.rawValue
= "3";
break
case
"Needs improvement":
NumericField4.rawValue
= "2";
break
case
"Does not meet expectations":
NumericField5.rawValue
= "1";
break
For a NumericField1(Score for Outstanding) on Calculate event the script:
var vScore=0 ;
for (var i=0; i<5; i++){
if (xfa.resolveNode("optionA[" + i + "]").rawValue=="5")vScore
+=xfa.resolveNode("optionA[" + i + "]").rawValue;}
NumericField1.rawValue= vScore ;
This I am getting(for NumericField1) is for example select Outstanding for all DDL is:55555 than 25 which is the desire!
How I can make it work, where is my mistake?
Thanks Niall -
Hello
I have a problem in calculating the apple id Can you help me please
I forgot answer security questions for your account How can knowledge
Please help
Please reply as soon as possible
I can not buy from camels Store
And the rest of the account balance $25
Message was edited by: lingo azamI think you mean App Store.
Rescue email address and how to reset Apple ID security questions -
Design Table with no of columns used for calculating the total
Hello,
I need to design a table/s for calculating the column values based on the operators provided. Like I have a table say
TableID, Col1 , Col2 ,Col3 ... Total Value
Total Value Column is calculating Col1 (operator value provided by the user) Col 2 (operator value provided by the user) Col3 etc
Although I m thinking to create another table which stores operator values, however not sure how to calculate the total.
like it can be COl 1 +Col2 -Col3 %Col4 etc.
Please help.Can you show some data example+ desired result?
DECLARE @t TABLE(a INT,b INT,c INT);
INSERT @t VALUES(1,2,3),(9,8,7),(4,6,5);
SELECT *
, ( SELECT COUNT(val)
FROM (VALUES (a)
, (b)
, (c)
) AS value(val)
) AS CountVal
FROM @t;
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence -
The quiz is not correctly calculating the number of quiz items in the published version
The quiz is not correctly calculating the number of quiz items in the published version
I created 20 quiz questions, but the output say there are 255. The slides between do not have quizzing enabled.I have a similiar problem. However, I am tracking user activity through tracking "next" buttons. Each button (and other interactions) has a objective ID and interaction id. The objective id is the same throughout the course; however each interaction and quiz item have different interaction ids. The total quiz items is shown as 54 and the first question is shown as question 50 or 54.
The course will be published to Blackboard as the LMS; I am using SCORM 1.2
The following settings are needed to track the user activity throughout the course, specifically the "next" buttons:
1. include in quiz
2. report answers
The answers to the problem of total quiz items not matching the actual number of questions has you turn off the include in quiz for interactions. How is this problem resolved when you want these interactions included with the information passed through SCORM to the LMS? -
i have monthly subscription app how can i know about who cancel subscription ? and how i can calculed the monthly revenue ?
Apple20141 wrote:
Or open sim tray and find out the carrier ring the carrier and give them numbers on sim
The carrier will not give out information about the owner of the phone. -
How to calculated the with out quntity strecter cost estimate
dera sir &mams
how to calculated the with out quntity strecter cost estimate.
thankes regardsDear Battikala,
Please post your questions in an understandable way without any spelling mistakes.
Regards
Madhusekhar Gupta -
How the system calculated the last evaluated price
how the system calculated the last evaluated price in inventory
Hi!
Last Evaluated Price u2013 the price calculated in the last run of the Inventory Valuation report
Maybe you are looking for
-
My Droid won't connect to my home wifi. What should i DO?
I've tried, resetting the phone and powering off and on but it still won't connect to my wifi. Other devices in my home connect to the wifi but this phone will not. It's a replacement they sent me and my old phone still connects. It also is runnin
-
The .mov file sis downloaded from my Sony camera. It is not altered and plays fine on the Mac mini using QuickTime. It will not play on a Windows 7 unit using the latest version of Quicktime. Why would that be? Why will one version of QuickTime work
-
I use my reminders all the time. I had 18 for today and now there are only 6--ones I had added previously that are overdue. There are no future reminders. I did not touch anything! And nothing I seem to do will get them back...
-
I think that over some short time my MAC slowsdown by itself. Today i even couldn't start. Well it startup hopefull but after i logged in only the screen opens with a picture, no internet icons, no active icons and a never ending spinning cursor. Wh
-
Lock sql server table through DG4ODBC?
Hi I'm using DG4ODBC to connect to SQL server 2008, querying data and insert to Oracle. Is it possible to lock the remote table in sql server, prohibit it from inserting any new record? My Oracle version is 11.1.0.7.0, OS version : Red Hat Enterprise