Purchase Order condition isn't calculating the value of refundable tax

Hello Experts,
When i am inputting tax in invoice tab at item level footer in Purchase Order, and after that when i am calculating the taxable and the total amount the condition tab isn't displaying the tax value, the condition type is NAVS of tax in condition tab. Kindly suggest me i want to calculate tax.
Thanks
Harmandeep

Hi flora
Just get through the sequence .
see the table fields ...
1. From EKKO table take an entry which is having pricing conditions.
Now in the fields list check out for field EKKO-KNUMV(document condition number).
2.Take this condition number and now goto table KONV.
Give the document condition number in the field KONV-KNUMV and execute .
This will lead to a list of document condition numbers and some other fields .
3.Now check for field KONV-KNUMH ,KONV-KAWRT(quantity) and note the value KONV-KWERT .
(Remember this is at header level).
This is ur condition record number.
**comments
Now from document condition number we got the condition record number (KNUMH).
4. now since u want the item level tax procedure go to table KONP and give the condition record number and execute .
This will give u a list of details .
Now concentrate on KONV-KAWRT (scale quantity) KONP-KBETR(rate) as this table will store Pricing per UNIT so product of these two will give u the total pricing tax, for a particular condition type say PR00 .
For that particular condition item .
Check the pricing procedure .
See t-code VK13 and check the pricing procedure .
From me23 check the same PO num select the item and check the pricing conditions applicable .
Select a particular pricing and goto condition->analysis->analysis pricing ,
Better take help of a SD functional consultant in the process.
regards,
vijay.

Similar Messages

Derelease of Purchase order in case of reducing the value

Hi Friends,
When ever we increase the value in Purchase Order it will derelease.
But we want to derelease the Purchase Orders if we reduce the value
also. Can we do this with any user exit or BADI.
We also want to have if any changes happen in perticular field, it shoudl DERELEASE PO, how to do this ?
Regards,
Sai Krishna

Hi,
We can do using the following logic / BADI / user exit:
User exit
During the individual release for purchase requisitions, the user exit is called in function module ME_REL_STRATEGIE_EBAN, in the overall release, it is called in function module ME_REL_GENERAL_STRATEGY_EBAN.
(Enhancement M06B0002, EXIT_SAPLEBND_001, ZXM06U13)
During the release for purchase orders the user exit in function module ME_REL_STRATEGIE_EKKO is called, in releases > 3.1X in program MM06EF0S_STRATEGIE_CEKKO (Enhancement M06E0004, EXIT_SAPLEBND_002, ZXM06U22).
The data is available in the user exit in structure I_CEBAN or I_CEKKO. The transfer from this structure to the calling program runs using structure E_CEBAN or E_CEKKO. In the user exit, I_CEBAN must be copied to E_CEBAN or I_CEKKO must be copied to E_CEKKO anywhere in the user exit, for example E_CEBAN = I_CEBAN.
Regards

Retrieve the Purchase Order Condition Records Table

Hallo!
I have found this code right here:
http://www.sap-basis-abap.com/sapab025.htm
It is very useful particular for purposes which I need. Please can somebody
try to fix the error to get it working. There is an internal table missing.
Regards
Ilhan
Retrieve the Purchase Order Condition Records Table
select * from ekko.
       select * from konv where knumv = ekko-knumv
           "Get all the condition records for the purchase order
       endselect.
endselect.
* Get the info record conditions record
* First declare the record structure for the key
data: begin of int_konp,
             txt1(5),
             lifnr(5),
             matnr(18),
             txt2(4),
             txt3(1),
        end of int_konp.
clear: konh, konp, int_konp.
* data for the record key konh-vakey
int_konp-txt1    = '00000'.
int_konp-lifnr    = ekko-lifnr+5(5).
int_konp-matnr = ekpo-matnr(18).
int_konp-txt2    = 'ALL'.
int_konp-werks = ekpo-werks.
int_konp-txt3    = '0'.
select * from konh where      kschl = 'PB00'            "Conditions (Header)
                                     and datab => p_datum.       "valid from date
      if konh-vakey = int_konp.                                  "Conditions (Item)
             select single * from konp where knumh = konh-knumh.
             continue.
      endif.
endselect.

Hi flora
Just get through the sequence .
see the table fields ...
1. From EKKO table take an entry which is having pricing conditions.
Now in the fields list check out for field EKKO-KNUMV(document condition number).
2.Take this condition number and now goto table KONV.
Give the document condition number in the field KONV-KNUMV and execute .
This will lead to a list of document condition numbers and some other fields .
3.Now check for field KONV-KNUMH ,KONV-KAWRT(quantity) and note the value KONV-KWERT .
(Remember this is at header level).
This is ur condition record number.
**comments
Now from document condition number we got the condition record number (KNUMH).
4. now since u want the item level tax procedure go to table KONP and give the condition record number and execute .
This will give u a list of details .
Now concentrate on KONV-KAWRT (scale quantity) KONP-KBETR(rate) as this table will store Pricing per UNIT so product of these two will give u the total pricing tax, for a particular condition type say PR00 .
For that particular condition item .
Check the pricing procedure .
See t-code VK13 and check the pricing procedure .
From me23 check the same PO num select the item and check the pricing conditions applicable .
Select a particular pricing and goto condition->analysis->analysis pricing ,
Better take help of a SD functional consultant in the process.
regards,
vijay.

Purchase Order Condition values

Hi Friends ,
             I'm facing a problem in identifying a data source for Purchase Order's. On searching in SDN Forum i came to know that there is no standard Datasource for Purchase order conditions.
             Can some one give me little clue of how to pick up the conditions from R/3 to my biw system.
Thanks and Regards,
Vijay

Hi Anil ,
         Thanks for your response.
         On analysing the condition table KONV in R/3 one thing striked my mind.
         Either it's Purchase order or Sale Order the condtion table is one , that is KONV. So if the condition number is available for a PO i think very well we can pick it for po's.
         Can you give me your suggestion on the above...please.
regards,
Vijay

GL Configuration Purchase order condition

Gurus,
Kindly let us know T-code to see GL Configuration of Purchase order condition.
Condition type...is as under
ZDEC
ZJWC
JEXC
SKTO
JEXS
Condiation Use "The condition type indicates, for example, whether, during pricing, the system applies a price, a discount, a surcharge, or other pricing elements, such as freight costs and sales taxes. For each of these pricing elements, there is a condition type defined in the system"

Hi,
Check in account key OB40 and OBYC settings
Regards,
JA

Extracting Purchase Order condition data

Hi All,
I have requirement where as i need to pull the purchase order condition data, but i haven't found any datasources regarding that, can somebody guide me how to pull that data to BW.
thanks
Neel

Hi Neel,
Create view of EKKO ( Purchasing header ) and KONV (Conditions (Transaction Data)) and link it on EKKO-KNUMV to KONV-KNUMV.
Create Generic Extractor based on the View.
Hope that helps.
Regards
Mr Kapadia
Assigning points is the way to say thanks in SDN.

Purchase order Condition control tab?

Hi,
Here in the purchase order condition control tab I need to get Price Date and Price date category. Presently they are not appearing in my purchase orders. When I go to screen layout, I am not able to get those fields to configure.
Could please anybody help me urgently?
Thanks,
Bhairav

Hi
GOTO----> OLME--> PO -> Define Screenlay out at Document level -> There Choose your Field Selection ( NBF and ME21N)... and go into to details--> And select the field selection group Quantity and Price and Double Click--> There you choose the field <b>PRICING DATE CONTROL</b> and Check it as a Required Entry or Optional Entry and save . <b>DO IT FOR BOTH NBF and ME21N FIELD SELECTION.</b>
Now when ever you make PO in ME21N.....You will get Pricing Date Category and Price Date Fields in PO-> Item Details---> Condition Control Tab.
Reward if useful
Regards
S.Baskaran
Message was edited by:
baskaran srinivasan

Purchase Order Condition Data

Hi,
Can anybody please explain what is Purchase Order Condition Data ( KONV ).
What is the use of it in the report.
Thanks,
JB

.

Purchase order release strategy with a characteristic value as a variable

Hi all,
We have Purchase order release strategy based on the following characteristics:
Total Net Order Value
Purchasing Organization
a few other custom fields
We would like to add a characteristic based on the creator of the PO. In the purchasing department there are two person which have the authorization to create an release POs. The goal is now to check if the actual user, who release the PO, is different from the PO creator. The value of this characteristic may not be a fix value, it must be contain the name of the actual user name.
Is there are a possibility to insert the characteristic value as a variable such as SY-UNAME instead a fix value?
Thanks,
Charles

this is verymuch possible. You can use unsed fields user1, user2 etc in CEKKO or (ii) insert a new field in CEKKOZZ and use the new field. You need to build up logic in user-exit such that this field will take the value of person who had logged in. This can be done by ABAPer.
Hope this resolves ur problem

Table name for WBS Element & Purchase Order Conditions

Dear All,
I need a table which stores WBS Elemnt No. & Purchase Order Conditions ( Like Excise Duty, Sales Tax, Packing & Forwarding etc.)
Thanks & Regards,
Sandeep N.Theurkar

Hi ,
It is not possible to get all this information from one table. But you can get the data by writing ABAP , or by creating a query.
As Amit posted WBS table is PRPS.
You can get the account assignment of a purchase order (whether it is network or WBS element) from table :EKKN.
Pass PO number into EKKN and get the following:
WBS No - PS PSP PNR
Network -NPLNR
Activity - AUFPL
Hope all the postings together will provide an integrated picture.
Regards
Muraleedharan.R

Purchase Order ME23n - communication tab - where these values stored

Dear all
Can someone tell me where the
Purchase Order ME23n - communication tab - where these values stored
I am not able to find it.
Regards,
Venkat

Table EKKO. All fields in communication tab are available here
EKKO-IHREZ Your Reference
EKKO-VERKF Responsible Salesperson at Vendor's Office
EKKO-TELF1 Vendor's Telephone Number
EKKO-UNSEZ Our Reference

How to disable Purchase Order Print Preview function in the Portal

We wish to expose some purchase order functions in our SAP Portal 7.0. The problem is that when we run any of the purchase order transactions as SAPGUI for HTML, the Print Preview function displays the full purchase order. This means that any user who wishes to short cut processes can display and then print a purchase order before it has been approved if they use the Portal to display the purchase order.
If the purchase order transaction is run from the normal SAPGUI, the Print Preview function only displays the top of the purchase order and the print function is disabled. Has anyone tackled this problem before and worked out a way of stopping users from using the Print Preview function to display purchase orders in the Portal and then print them?
Regards,
Tom Maggs

hi,
DATA: w_compop    TYPE ssfcompop.
w_compop-tdimmed   = ' '.     "Print Immediately control parameter should be empty..
Then only print preview pop-up will come..
then call your smartform like this..
CALL FUNCTION fnam
    EXPORTING
      control_parameters = w_ctrlop
      output_options     = w_compop
          TABLES
      it_vbdkr           = it_tvbdkr[]
      it_vbdpr           = tvbdpr[]
      it_zglentitycode   = it_zglentitycode[].
regards
vijay

Can conditional formatting refer to the value in another cell

Is there a way for conditional formatting refer to the value of another cell instead of entering the value in the conditional format box?

wwjd is right. no way of doing that.
WWJD, two wuestions:
1) do you have the new office 2008 for mac beta (is it out?), how close is it to the new features in Office 2007 for windows, if you do?
2) why do our pictures keep getting cut off after a day of posting. I posted a pic yesterday and its already not showing on the page the next day. Do they not load them after the question is marked as solved?
thanks,
Jason

Purchase Order Condition Value

Hi,
We have an issue with the Conditions in a Purchase Order raised by the client.
In this purchase order, there are 151 items with PB00 or PBXX item conditions.
However when these are totaled up (as a standard SAP functionality) and the values are displayed are at header level, we find that the totaled values are incorrect.
For some values the quantity used for totaling at header level are incorrect.
For eg. For one material, there are 2 line items of 16 qty each which total up to 32 items at 29.25 USD. However the header level shows the amount as 965.25 with amount as 29.25 and qty as 33.
There are many such discrepancies between the header calculations and the item level quantities. In some cases items with PBXX conditions have been totaled up under PB00.
Both PB00 and PBXX are configured as item level conditions only.
This results in Net Value of Purchase Order being wrongly calculated.
Could anybody throw any light on why this happens and how it can be resolved.
Regards
Anjan

Hello Anjan
If u check the condition type PBXX and PB00, in PB00 in Group condition field , 'Group condition' check box needs to 'Tick'. Please check relevant help. I hope due to non tick in condition type, caculation in PO for above condition types are going wrong. Also check with Item and Header tick in condition type.
Regards
Amol

Is there any function module to get the purchase order conditions from EONP

Hi,
I want to get the EONP and EONH table details for the purchase orders with the help of function module. Can anyone tell me any function module name which would give me those details.
Thanks,
Atanu

Hi
Check with BAPI function module BAPI_PO_GETDETAIL and BAPI_PO_GETDETAIL1.
Regards
Srilaxmi

Purchase Order condition isn't calculating the value of refundable tax

Similar Messages

Maybe you are looking for