Calculating total time from a query
Hi everyone,
I have a simple database and one of the fields in this
database is time spent on stuff, for example a bike ride lasted
00:45:00, 01:33:03, 01:23:03 ETC
what I am trying to do is calculate total time. so do a sum
of that column.
Simple enough.
the column is a VarChar, I tried Time as well and well that
did not go well.
if I use mysql command line I get this:
mysql> SELECT SUM(mv_time) FROM data WHERE user_id = 2;
+--------------+
| SUM(mv_time) |
+--------------+
| 8 |
+--------------+
1 row in set (0.00 sec)
No idea how it came up with that one as 8 is incorrect
so I got a bit fancier:
mysql> SELECT SEC_TO_TIME(SUM(TIME_TO_SEC(mv_time))) AS
mv_time FROM data WHERE user_id = 2;
+----------+
| mv_time |
+----------+
| 26:14:58 |
+----------+
1 row in set (0.00 sec)
Bingo that is correct.
but if I use that same query within cfquery I get a nice java
error telling that you can't have 26 hours in a single day.
Any ideas how I can accomplish this should be simple task?
Thank you.
Luc
Hi Cf_dev2,
How would I go about making easy for my users to submit the
seconds into the database?
for example I would want them (them being me really :) ) to
enter 01:35:00 (for one hour and 35 minutes) and then have CF or
SQL convert that to seconds (instead of having myself figure that
out manually I am no good at math)
Jdeline, I don't understand what you mean by not storing it
as comma delimited, as far as I know its not comma delimited, its
stored in a table called data along with a primary key id, userid,
date, etc
Thanks
Luc
Similar Messages
-
Is there a way I can have my form calculate a total time from beginning and ending time?
Is there a way I can have my form calculate a total time from beginning and ending time?
Sorry, but Formscentral doesn't support either a timer function or any kind of calculation. You might be able to do this if created your form in PDF. For help with PDF form creation in Acrobat I suggest you repost your question to the Acrobat Forum.
Andrew -
Calculating total time.
I'm somewhat new to using spreadsheets. Basically I just want to keep track of the time I spend doing a particular job. So I'm tracking my start time, end time, and then I want to calculate the total time spent. Thanks.
Yes, I thought about that. But if you start at say
9pm and end at 2am you would get the incorrect result
of 7 hours. I think I have to convert the time to
something else before the math takes place. But I'm
not sure how that would work.
I'm not sure how you managed to subtract 9pm from 2pm and get 7 hours. When I try 2am - 9pm, I get #VALUE!, as AppleWorks reads both 'times' as text, and cannot use Text values in a formula that requires numbers. AppleWorks is a bit fussy on what it considers to be a number.
Using the default alignment, you can recognize what AppleWorks thinks is a number—it will be aligned to the right of the cell—and what AW considers to be Text—it will be aligned to the left of the cell. In the case of Time, you're better off using the 24 hour clock, and entering one minute betore 2pm as 13:59.
The Mac clock's unit of time is the (24 hour) Day, and all times entered are regarded as the portion of one day that has elapsed up to that time. When you do the subtraction, the result is also a time of day. For start and end times within the same calendar day, simply doing the subtraction will give a result that can be read as the (correct) elapsed time. For the example times you gave, the 'correct' result is also visible:
02:00 - 21:00 = 05:00
But the actual numbers behind that 05:00 result and the two times used to get it are the portion of the current day that has passed up to each of the times entered, and the difference obtained when you do the subtraction:
0.0833 - 0.8750 = -0.7917
If you only want the (readable) result for a single day, that's not a problem. But if you want to add the results to get a total time for a week, you need to (make AppleWorks) do some additional math. In simplest terms, you need to add 1 to the end time if the end time is on the calendar day after the start time. There's an explanation of this below, which you should read for a better understanding of Time and the Mac, but which isn't necessary to use the formula.
The formula assumes your start time is in column B, your end time in column C, your formula reporting time worked is in column D, and that you will enter times in rows 2..6, and calculate the week's sum in D7
Enter in D2, and fill down to D6: =IF(C2,C2-B2+(C2<B2),"")
Format these cells to display as Time.
Enter in D7: =24(SUM(D2..D6)) —to report the result in hours (eg. 25.678)
Format the cell to display as Number, General.
or
Enter in D7: =INT(24(SUM(D2..D6))&":"MINUTE(SUM(D2..D6)) —to report the result as hours and minutes
Note that the second option for D7 produces a text string which will not be useable in further calculations.
This is Text, so no Number formatting is necessary.
Regards,
Barry
Time and the Mac
The Mac clock tracks time in Days and Fractions of a Day, starting at midnight, January 1, 1904.
Nine PM today, May 8, 2006, represented as a decimal number, is 37383.875. Two AM tomorrow, May 9, 2006, is 37384.0833333333.
An AppleWorks spreadsheet cell (or database field) formatted to display as Time will ignore the whole number part of those numbers, and interpret the decimal fraction part as Time of Day, and display the result in the Time format you have chosen for the cell.
A cell (or field) formatted to display as a Date will ignore the fractional part of the number, and display the whole number part in the Date format you have chosen.
When you enter a time, the result is the time of day on January 1, 1904. When calculating elapsed times where start and end times cross the midnight boundary, you need to add 1 (day) to the result to compensate for the change in day and get a result that can be used in further calculations. That's what the "+(C2<B2)" part of the first formula above does—adds 1 if "(C2<B2)" is TRUE or adds 0 it it's false.
If you add times, the result is 'correct', but if the total reaches 24 hours, the displayed result will appear incorrect as a Time formatted cell ignores the whole number part of the actual result (eg. 27 hours, or 1.25 days), will display as 03:00, the same as 3 hours, or 0.25 days. You can convert the result to hours and fractions of hours by simply multiplying the result by 24, and displaying it as a Number rather than as Time.
B -
Calculating average time from two records from the same table.
Hi all
I need to calculate the average time between two events that are recorded in the same table.
The table is TMS_MESSAGE_AUDIT_LOG
MESSAGE_ID VARCHAR2(16 BYTE) NOT NULL,
MESSAGE_VERSION NUMBER(2) NOT NULL,
CREATE_TM VARCHAR2(18 BYTE) NOT NULL,
MESSAGE_STATUS VARCHAR2(30 BYTE),
TRANSACTION_TYPE_NM VARCHAR2(30 BYTE),
MESSAGE_TP VARCHAR2(3 BYTE),
WORKFLOW_OBJECT VARCHAR2(30 BYTE) NOT NULL,
WORKFLOW_REQUEST VARCHAR2(30 BYTE) NOT NULL,
WORKFLOW_RETURN_CD VARCHAR2(30 BYTE) NOT NULL,
AUDIT_ACTION VARCHAR2(255 BYTE),
LAST_UPDATE_USER_LOGON_ID VARCHAR2(12 BYTE),
LOCAL_TM VARCHAR2(18 BYTE) NOT NULL,
LOCAL_TIME_ZN_NM VARCHAR2(70 BYTE) NOT NULL,
LOCAL_DAYLIGHT_IN CHAR(1 BYTE) NOT NULL,
FPRINT VARCHAR2(30 BYTE)
What i now need is
When the MESSAGE_ID is the same i need have the average time between when the MESSAGE_STATUS is AA and BB ( I need the time out of the CREATE_TM field )
And this for every 15 minutes interval.
Because this table will become BIG millions and millions of records it needs to be fast.
Can anybody help me.
MarcelSomething like this?
CREATE TABLE wr_test
( message_id VARCHAR2(16 BYTE) NOT NULL
, message_version NUMBER(2) NOT NULL -- Assumption: Acknowledged ver > Received ver
, create_tm VARCHAR2(18 BYTE) NOT NULL
, message_status VARCHAR2(30 BYTE)
, transaction_type_nm VARCHAR2(30 BYTE)
, workflow_object VARCHAR2(30 BYTE) DEFAULT 'x' NOT NULL
, workflow_request VARCHAR2(30 BYTE) DEFAULT 'x' NOT NULL
, workflow_return_cd VARCHAR2(30 BYTE) DEFAULT 'x' NOT NULL
, audit_action VARCHAR2(255 BYTE)
, last_update_user_logon_id VARCHAR2(12 BYTE)
, local_tm VARCHAR2(18 BYTE) NOT NULL
, local_time_zn_nm VARCHAR2(70 BYTE) DEFAULT 'GMT' NOT NULL
, local_daylight_in CHAR(1 BYTE) DEFAULT 'x' NOT NULL );
INSERT ALL
INTO wr_test
( message_id
, message_version
, create_tm
, message_status
, local_tm )
VALUES ( message_id
, 1
, create_tm
, '(Receive)'
, TO_CHAR(local_tm,'YYYYMMDD HH24:MI:SS') )
INTO wr_test
( message_id
, message_version
, create_tm
, message_status
, local_tm )
VALUES ( message_id
, 2
, create_tm
, 'Wait CLSB Ack'
, TO_CHAR
( local_tm + NUMTODSINTERVAL(DBMS_RANDOM.VALUE(0,2e5),'SECOND')
, 'YYYYMMDD HH24:MI:SS' ) )
SELECT ROWNUM AS message_id
, TO_CHAR(SYSDATE,'YYYYMMDD HH24:MI:SS') AS create_tm
, DATE '2000-01-01' + DBMS_RANDOM.VALUE(0,3) AS local_tm
FROM dual CONNECT BY ROWNUM < 100000;
WITH src AS
( SELECT message_id
, message_status
, message_version
, TO_DATE(SUBSTR(local_tm,1,17),'YYYYMMDD HH24:MI:SS') AS dt
, TO_DATE(SUBSTR(local_tm,1,8),'YYYYMMDD') AS dt_day
, TO_CHAR(TO_DATE(SUBSTR(local_tm,10,8),'HH24:MI:SS'),'SSSSS') AS dt_sec
FROM wr_test
WHERE message_status IN ('(Receive)','Wait CLSB Ack') )
SELECT dt_day + NUMTODSINTERVAL(period,'SECOND') AS dt
, NUMTODSINTERVAL(AVG(elapsed),'DAY') AS avg_elapsed
, NUMTODSINTERVAL(MIN(elapsed),'DAY') AS min_elapsed
, NUMTODSINTERVAL(MAX(elapsed),'DAY') AS max_elapsed
, COUNT(*)
FROM ( SELECT message_id
, message_status
, dt_day
, TRUNC(dt_sec/300)*300 AS period
, LEAD(dt) OVER (PARTITION BY message_id ORDER BY message_version) AS ack_dt
, LEAD(dt) OVER (PARTITION BY message_id ORDER BY message_version) - dt AS elapsed
FROM src ) cal
WHERE cal.message_status = '(Receive)'
GROUP BY dt_day, period
ORDER BY 1;Replace "wr_test" with "tms_message_audit_log" in the WITH subquery to test on your data. -
My client need equipment available time. it is [total time - total down time] how can I get the total time from system. I want to prepare the functional specifications.
Regards,
VMHi
You need to ask user to fix the total time .i,e. if they have three shift operation ( 8hr/shift), then total time is 24 hrs/day. then you need to ask them set breakdown indicator whenever the equipment is down. You can get this info from table for equipment.
then calculate available time =total time u2013 total down time
Let me know if you need any more information
Jeny -
How to get the total execution time from a tkprof file
Hi,
I have a tkprof file. How can I get the total execution time. Going through the file i guess the sum of "Total Waited" would give the total time in the section "Elapsed times include waiting on following events:"
. The sample of tkprof is given below.
SQL ID: gg52tq1ajzy7t Plan Hash: 3406052038
SELECT POSTED_FLAG
FROM
AP_INVOICE_PAYMENTS WHERE CHECK_ID = :B1 UNION ALL SELECT POSTED_FLAG FROM
AP_PAYMENT_HISTORY APH, AP_SYSTEM_PARAMETERS ASP WHERE CHECK_ID = :B1 AND
NVL(APH.ORG_ID, -99) = NVL(ASP.ORG_ID, -99) AND
(NVL(ASP.WHEN_TO_ACCOUNT_PMT, 'ALWAYS') = 'ALWAYS' OR
(NVL(ASP.WHEN_TO_ACCOUNT_PMT, 'ALWAYS') = 'CLEARING ONLY' AND
APH.TRANSACTION_TYPE IN ('PAYMENT CLEARING', 'PAYMENT UNCLEARING')))
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 442 0.08 0.13 0 0 0 0
Fetch 963 0.22 4.72 350 16955 0 521
total 1406 0.31 4.85 350 16955 0 521
Misses in library cache during parse: 1
Optimizer mode: ALL_ROWS
Parsing user id: 173 (recursive depth: 1)
Number of plan statistics captured: 1
Rows (1st) Rows (avg) Rows (max) Row Source Operation
1 1 1 UNION-ALL (cr=38 pr=3 pw=0 time=139 us)
1 1 1 TABLE ACCESS BY INDEX ROWID AP_INVOICE_PAYMENTS_ALL (cr=5 pr=0 pw=0 time=124 us cost=6 size=12 card=1)
1 1 1 INDEX RANGE SCAN AP_INVOICE_PAYMENTS_N2 (cr=4 pr=0 pw=0 time=92 us cost=3 size=0 card=70)(object id 27741)
0 0 0 NESTED LOOPS (cr=33 pr=3 pw=0 time=20897 us)
0 0 0 NESTED LOOPS (cr=33 pr=3 pw=0 time=20891 us cost=12 size=41 card=1)
1 1 1 TABLE ACCESS FULL AP_SYSTEM_PARAMETERS_ALL (cr=30 pr=0 pw=0 time=313 us cost=9 size=11 card=1)
0 0 0 INDEX RANGE SCAN AP_PAYMENT_HISTORY_N1 (cr=3 pr=3 pw=0 time=20568 us cost=2 size=0 card=1)(object id 27834)
0 0 0 TABLE ACCESS BY INDEX ROWID AP_PAYMENT_HISTORY_ALL (cr=0 pr=0 pw=0 time=0 us cost=3 size=30 card=1)
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
db file sequential read 350 0.15 4.33
Disk file operations I/O 3 0.00 0.00
latch: shared pool 1 0.17 0.17
********************************************************************************user13019948 wrote:
Hi,
I have a tkprof file. How can I get the total execution time.
call count cpu elapsed disk query current rows
total 1406 0.31 4.85 350 16955 0 521TOTAL ELAPSED TIME is 4.85 seconds from line above -
Query takes more time from client
Hi,
I have a select query (which refers to views and calls a function), which fetches results in 2 secs when executed from database. But takes more than 10 mins from the client.
The tkprof for the call from the client is given below. Could you please suggest, what is going wrong and how this can be addressed?
The index IDX_table1_1 is on col3.
Trace file: trace_file.trc
Sort options: exeela
count = number of times OCI procedure was executed
cpu = cpu time in seconds executing
elapsed = elapsed time in seconds executing
disk = number of physical reads of buffers from disk
query = number of buffers gotten for consistent read
current = number of buffers gotten in current mode (usually for update)
rows = number of rows processed by the fetch or execute call
SELECT ROUND(SUM(NVL((col1-col2),(SYSDATE - col2)
FROM
table1 WHERE col3 = :B1 GROUP BY col3
call count cpu elapsed disk query current rows
Parse 0 0.00 0.00 0 0 0 0
Execute 7402 0.27 7.40 0 0 0 0
Fetch 7402 1.13 59.37 1663 22535 0 7335
total 14804 1.40 66.77 1663 22535 0 7335
Misses in library cache during parse: 0
Optimizer mode: ALL_ROWS
Parsing user id: 32 (ORADBA) (recursive depth: 1)
Rows Execution Plan
0 SELECT STATEMENT MODE: ALL_ROWS
0 SORT (GROUP BY NOSORT)
0 TABLE ACCESS MODE: ANALYZED (BY INDEX ROWID) OF 'table1'
(TABLE)
0 INDEX MODE: ANALYZED (RANGE SCAN) OF 'IDX_table1_1'
(INDEX)
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
db file sequential read 1663 1.37 57.71
OVERALL TOTALS FOR ALL NON-RECURSIVE STATEMENTS
call count cpu elapsed disk query current rows
Parse 0 0.00 0.00 0 0 0 0
Execute 0 0.00 0.00 0 0 0 0
Fetch 0 0.00 0.00 0 0 0 0
total 0 0.00 0.00 0 0 0 0
Misses in library cache during parse: 0
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
db file sequential read 16039 3.09 385.04
db file scattered read 34 0.21 1.42
latch: cache buffers chains 26 0.34 2.14
SQL*Net break/reset to client 2 0.05 0.05
SQL*Net message to client 2 0.00 0.00
SQL*Net message from client 2 79.99 79.99
SQL*Net message to dblink 1 0.00 0.00
SQL*Net message from dblink 1 0.00 0.00
OVERALL TOTALS FOR ALL RECURSIVE STATEMENTS
call count cpu elapsed disk query current rows
Parse 0 0.00 0.00 0 0 0 0
Execute 7402 0.27 7.40 0 0 0 0
Fetch 7402 1.13 59.37 1663 22535 0 7335
total 14804 1.40 66.77 1663 22535 0 7335
Misses in library cache during parse: 0
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
db file sequential read 1663 1.37 57.71
1 user SQL statements in session.
0 internal SQL statements in session.
1 SQL statements in session.
1 statement EXPLAINed in this session.
Trace file: trace_file.trc
Trace file compatibility: 10.01.00
Sort options: exeela
1 session in tracefile.
1 user SQL statements in trace file.
0 internal SQL statements in trace file.
1 SQL statements in trace file.
1 unique SQL statements in trace file.
1 SQL statements EXPLAINed using schema:
ORADBA.prof$plan_table
Default table was used.
Table was created.
Table was dropped.
84792 lines in trace file.
4152 elapsed seconds in trace file.Edited by: agathya on Feb 26, 2010 8:39 PMI have a select query (which refers to views and calls a function), which fetches results in 2 secs when >executed from database. But takes more than 10 mins from the client.You are providing proof for the latter part of your statement above.
But not for the former part (fetches in 2 secs when exec'd from db).
It would have been nice if you also provide the sql-trace information for that.
Without it we cannot help you much. Other than making the observation that you obviously have a query that is I/O bound, and that I/O on your system is rather slow: on average an I/O takes 0.04 seconds (66.77 divided by 1663). -
Find total processing time from routing
Hi,
I'm writing specs for creating a production scheduling report for sales orders. I'm stuck at finding the relevant tables and fields for this particular calc. I want to find the processing time from routing.
Total Processing Time (if Procurement type = u201CEu201D, then all operations from tasklist/Routing Operations for the material number) = Setup Time + (Machine time * Operation Quantity) + (Labor time * Operation Quantity)
Any suggestions??
ThanksHi
Check with any one of the following table:
EAPL Allocation of task lists to pieces of equipment
EINA Purchasing Info Record: General Data
EINE Purchasing Info Record: Purchasing Organization Data
ESKL Account Assignment Specification: Service Line
ESLH Service Package Header Data
ESLL Lines of Service Package
INOB Link between Internal Number and Object
KALC Material Quantity Calculation - Formulas
KALT Material Quantity Calculation: Header
KOCLU Cluster for conditions in purchasing and sales
KSSK Allocation Table: Object to Class
LFA1 Vendor Master (General Section)
MAPL Assignment of Task Lists to Materials
MLST Milestone
MLTX Milestone Description
PLAB Relationships
PLAS Task list - selection of operations/activities
PLFH Task list - production resources/tools
PLFL Task list - sequences
PLFT Process Instructions
PLFV PI Characteristics/Sub-Operation Parameter Values
PLKO Task list - header
PLKZ Task list: main header
PLMK Inspection plan characteristics
PLMW MAPL-Dependent Charac. Specifications (Inspection Plan)
PLMZ Allocation of bill of material items to operations
PLPH CAPP: Sub-operations
PLPO Task list - operation/activity
Thanks
Saravana
Reward if useful -
I have a table-valued function that run in sql 2005 and when try to execute in sql 2008 r2, return the next "Conversion failed when converting date and/or time from character string".
USE [Runtime]
GO
/****** Object: UserDefinedFunction [dbo].[f_Pinto_Graf_P_Opt] Script Date: 06/11/2013 08:47:47 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE FUNCTION [dbo].[f_Pinto_Graf_P_Opt] (@fechaInicio datetime, @fechaFin datetime)
-- Declaramos la tabla "@Produc_Opt" que será devuelta por la funcion
RETURNS @Produc_Opt table ( Hora datetime,NSACOS int, NSACOS_opt int)
AS
BEGIN
-- Crea el Cursor
DECLARE cursorHora CURSOR
READ_ONLY
FOR SELECT DateTime, Value FROM f_PP_Graficas ('Pinto_CON_SACOS',@fechaInicio, @fechaFin,'Pinto_PRODUCTO')
-- Declaracion de variables locales
DECLARE @produc_opt_hora int
DECLARE @produc_opt_parc int
DECLARE @nsacos int
DECLARE @time_parc datetime
-- Inicializamos VARIABLES
SET @produc_opt_hora = (SELECT * FROM f_Valor (@fechaFin,'Pinto_PRODUC_OPT'))
-- Abre y se crea el conjunto del cursor
OPEN cursorHora
-- Comenzamos los calculos
FETCH NEXT FROM cursorHora INTO @time_parc,@nsacos
/************ BUCLE WHILE QUE SE VA A MOVER A TRAVES DEL CURSOR ************/
WHILE (@@fetch_status <> -1)
BEGIN
IF (@@fetch_status = -2)
BEGIN
-- Terminamos la ejecucion
BREAK
END
-- REALIZAMOS CÁLCULOS
SET @produc_opt_parc = (SELECT dbo.f_P_Opt_Parc (@fechaInicio,@time_parc,@produc_opt_hora))
-- INSERTAMOS VALORES EN LA TABLA
INSERT @Produc_Opt VALUES (@time_parc,@nsacos, @produc_opt_parc)
-- Avanzamos el cursor
FETCH NEXT FROM cursorHora INTO @time_parc,@nsacos
END
/************ FIN DEL BUCLE QUE SE MUEVE A TRAVES DEL CURSOR ***************/
-- Cerramos el cursor
CLOSE cursorHora
-- Liberamos los cursores
DEALLOCATE cursorHora
RETURN
ENDYou can search the forums for that error message and find previous discussions - they all boil down to the same problem. Somewhere in your query that calls this function, the code invoked implicitly converts from string to date/datetime. In general,
this works in any version of sql server if the runtime settings are correct for the format of the string data. The fact that it works in one server and not in another server suggests that the query executes with different settings - and I'll assume for
the moment that the format of the data involved in this conversion is consistent within the database/resultset and consistent between the 2 servers.
I suggest you read Tibor's guide to the datetime datatype (via the link to his site below) first - then go find the actual code that performs this conversion. It may not be in the function you posted, since that function also executes other functions.
You also did not post the query that calls this function, so this function may not, in fact, be the source of the problem at all.
Tibor's site -
SAP query error - 1). [Microsoft][SQL Server Native Client 10.0][SQL Server]Conversion failed when converting date and/or time from character string. 'Received Alerts' (OAIB)
SELECT
CASE WHEN T0.DocStatus = 'O' THEN 'OPEN'
WHEN T0.DocStatus = 'C' THEN 'CLOSED' END AS 'Document Status',
T0.DocDate AS 'Posting Date',
T0.DocNum AS 'Doc.No',
T0.NumAtCard,
T0.TransId AS 'Trans. No.',
T0.Comments AS 'Remarks',
T0.CardCode AS 'Offset Acct',
T0.CardName AS 'Offset Acct Name',
sum(T0.DocTotal) + (T0.WTSum) as 'DocTotal',
T3.DueDate AS 'Cheque Date',
T3.CheckSum AS 'Amount'
FROM ODPO AS T0 LEFT OUTER JOIN
VPM2 AS T1 ON T0.ObjType = T1.InvType AND T0.DocEntry = T1.DocEntry LEFT OUTER JOIN
OVPM AS T2 ON T2.DocEntry = T1.DocNum LEFT OUTER JOIN
VPM1 AS T3 ON T2.DocEntry = T3.DocNum
where T0.DocDate>='[%0]' and T0.DocDate<='[%1]'Hi,
Try this:
SELECT
CASE WHEN T0.DocStatus = 'O' THEN 'OPEN'
WHEN T0.DocStatus = 'C' THEN 'CLOSED' END AS 'Document Status',
T0.DocDate AS 'Posting Date',
T0.DocNum AS 'Doc.No',
T0.NumAtCard,
T0.TransId AS 'Trans. No.',
T0.Comments AS 'Remarks',
T0.CardCode AS 'Offset Acct',
T0.CardName AS 'Offset Acct Name',
sum(T0.DocTotal) + (T0.WTSum) as 'DocTotal',
T3.DueDate AS 'Cheque Date',
T3.CheckSum AS 'Amount'
FROM ODPO T0 LEFT OUTER JOIN
VPM2 T1 ON T0.ObjType = T1.InvType AND T0.DocEntry = T1.DocEntry
LEFT OUTER JOIN
OVPM T2 ON T2.DocEntry = T1.DocNum LEFT OUTER JOIN
VPM1 T3 ON T2.DocEntry = T3.DocNum
where T0.DocDate >= '[%0]' and T0.DocDate <='[%1]'
group by T0.DocStatus,T0.DocDate ,
T0.DocNum ,
T0.NumAtCard,
T0.TransId ,
T0.Comments ,
T0.CardCode,
T0.CardName ,
T0.WTSum ,
T3.DueDate ,
T3.CheckSum
Thanks & Regards,
Nagarajan -
When I try to backup my files from photoshop elements 12 the "calculating total media size" box will only get as far as 46% and then freeze, how can I make it go to 100%
hi barbara
thank you for your response, i appreciate it. there's definitely nothing wrong with the mouse or trackpad, both work fine in every other application....i can also easily change size dimensions in other programs on my computer so it doesn't seem to be that either. it seems like there is something weird going on in the way that pse and my mac are interacting with each other, just wish i knew what it was. thank you again, wish me luck! -
What do I do every time I tap "Back up Now" (through iCloud) it always says "The last backup could not be completed". My iPad is plugged in, locked and connected to wi-fi. I still have available 11GB storage from 15GB total storage from iCloud.
I'm having exactly the same problem. I have a new iPad, my iCloud account is set up and verified (I wouldn't be logged in and writing this otherwise), auto backups are turned on, but it's never completed a backup. If I manually select 'Backup Now' in iCloud Settings, it times out while estimating time remaining. Strangely, today my iCloud free storage space went from 5G to 4.9G then back to 5G. Annoyingly, I'm now getting reminders that I've never backed it up! The iCloud help I followed from the forum didn't cover this error message.
-
Printing from iCal with total time
Is there a way when printing from iCal to show the total time that an event took place for? IE: If I print a day it will show at what time the event started and not when it ended. Is there a way to do this? Is there a way to get it to print the total time an event took? I say event but it could be a meeting as well.
ThanksCan you be more specific?
Mike -
In the new iTunes the play list total time displays in 1.5 hours format, how do I get it to clearly show 1hr 31min 12sec like before, I want the exact time so I can properly fit all the songs when I want to burn this playlist to a disc. You can no longer just click on it to change the display format. Nor can you right click, control click, or change it in options. If anyone knows I would very much appreciate your imput. Thank You.
Actually, that's the problem ... in iTunes *11* it has stopped working. I have the status bar displayed, and it is stuck on the 1.x hours format.
That is very, very strange !!
I can't get that to happen on mine. It worked in 11.0 and I updated today to 11.0.1 and it's OK.
I've tried making a new playlist, I've tried changing an old playlist, smart playlist ...... all OK ???? -
Need help calculating total from flowable rows
I am trying like a mad man to figure out how to calculate a total field from fields that flow one after another. I utilized the tutuorial on Adobe, but the process to enter the formcalc forumula does not work in my instance. I can upload the file to anyone interested in helpting.
Thanks!
MikeFormCalc is a feature of LiveCycle Designer forms, please repost in their forums.
Maybe you are looking for
-
Although I have been using Google Maps App in India for a while now (without any issues) but I still want to know if there are any plans for launching Turn by Turn Navigation under the OOTB Map App for iOS? It has been quite a while since Apple came
-
Hi, I create org.dom4j.Document in java and I need set encoding to windows-1250, but I don't know how it do. I have always default encoding UTF-8. Document document = DocumentHelper.createDocument(); Element zakazky = document.addElement(ZAKAZKY); <?
-
Changing default directory.
Hello Whenever I try to launch a VI, the dialog box start with my document directory, but I prefer to change it. How can I do it. T.U in advanced P.S All my games with Tools/options/paths didn't helped.
-
hello! i'm french and truly hope that someone will understand my english and will be able to help me I just can't find my install dvd(for logic 8) and it's becoming really depressing... Please me what can i do....
-
When my iMac goes to sleep, pressing any key on the keyboard, or moving the mouse will not wake it up. I've tried resetting the SMC (System Management Controller), as suggested in one the Tech Support articles but to no avail. I have to shut it down