Calculator for addition using module pool
Hai all,
I going to create a calculator for addition using module pool .
i have set a screen 9001 and i placed a box and inside that i
placed 9 push buttons with the naming of 1,2,...9 as same as the normal calulator
then i have a "PLUS" push button which is used to add the 2 numbers and i have a "SUM" push button in 9001.
when i click the SUM push button it will call screen 9002 which have the input box for the result purpose.
can i do this or not??
i know it is little complicated but i need ur help..and also tell me can push button hold value or not??
thanks and regards,
pradeep.
Moderator Message: try it and find out for yourself.
Edited by: kishan P on Jan 19, 2011 4:18 PM
Hai maha,
Using i/o is very simpler one that i know but i need to create by using 9 push buttons.
thanks,
pradeep
Similar Messages
-
System generated value for a field and incrementing (using module pool pro)
Hi,
I'm getting system generated value for a field and incrementing (i.e done by coding) when i'm saving the screen or transaction (which is created using module pool programming) while modifying, saving its working fine, but when i'm going out of the screen or exit n again i start the screen (with some ztransco) the value for the field again starting from 0 so i want to start from the same value for a field where we exit or got out from the screen n incremented respectively while saving the screen,
Thanks & Regards,
MS
Edited by: Rob Burbank on May 4, 2010 10:40 AMSearch the forum for number range objects.
Rob -
How to update field values in a database table using module pool prg?
hi
how to update field values in a database table using module pool prg?
we created a customized table, and we put 2 push buttons in screen painter update and display.
but update is not working?
data is enter into screen fields and to internal table, but it is not updated in database table.
thanks in adv
vidyaHI,
we already used the update statement. but its not working.
plz check this.
*& Module Pool ZCUST_CALL_REC
PROGRAM ZCUST_CALL_REC.
TABLES: ZCUST_CALL_REC,ZREMARKS.
data: v_kun_low like ZCUST_CALL_REC-kunnr ,
v_kun_high like ZCUST_CALL_REC-kunnr,
v_bud_low like ZCUST_CALL_REC-budat,
v_bud_high like ZCUST_CALL_REC-budat.
ranges r_kunnr for ZCUST_CALL_REC-kunnr .
ranges r_budat for zcust_call_rec-budat.
DATA: ITAB TYPE STANDARD TABLE OF ZCUST_CALL_REC WITH HEADER LINE,
JTAB TYPE STANDARD TABLE OF ZREMARKS WITH HEADER LINE.
*data:begin of itab occurs 0,
MANDT LIKE ZCUST_CALL_REC-MANDT,
kunnr like ZCUST_CALL_REC-kunnr,
budat like ZCUST_CALL_REC-budat,
code like ZCUST_CALL_REC-code,
remarks like ZCUST_CALL_REC-remarks,
end of itab.
*data:begin of Jtab occurs 0,
MANDT LIKE ZCUST_CALL_REC-MANDT,
kunnr like ZCUST_CALL_REC-kunnr,
budat like ZCUST_CALL_REC-budat,
code like ZCUST_CALL_REC-code,
remarks like ZCUST_CALL_REC-remarks,
end of Jtab.
CONTROLS:vcontrol TYPE TABLEVIEW USING SCREEN '9001'.
CONTROLS:vcontrol1 TYPE TABLEVIEW USING SCREEN '9002'.
*start-of-selection.
*& Module USER_COMMAND_9000 INPUT
text
MODULE USER_COMMAND_9000 INPUT.
CASE sy-ucomm.
WHEN 'BACK' OR 'EXIT' OR 'CANCEL'.
SET SCREEN 0.
LEAVE SCREEN.
CLEAR sy-ucomm.
WHEN 'ENQUIRY'.
perform multiple_selection.
perform append_CUSTOMER_code.
PERFORM SELECT_DATA.
call screen '9001'.
WHEN 'UPDATE'.
perform append_CUSTOMER_code.
PERFORM SELECT_DATA.
call screen '9002'.
perform update on commit.
WHEN 'DELETE'.
perform append_CUSTOMER_code.
PERFORM SELECT_DATA.
call screen '9002'.
ENDCASE.
ENDMODULE. " USER_COMMAND_9000 INPUT
*& Module STATUS_9000 OUTPUT
text
MODULE STATUS_9000 OUTPUT.
SET PF-STATUS 'ZCUSTOMER'.
SET TITLEBAR 'xxx'.
ENDMODULE. " STATUS_9000 OUTPUT
*& Module USER_COMMAND_9001 INPUT
text
MODULE USER_COMMAND_9001 INPUT.
CASE sy-ucomm.
WHEN 'BACK' OR 'EXIT' OR 'CANCEL'.
SET SCREEN 0.
LEAVE SCREEN.
CLEAR sy-ucomm.
endcase.
ENDMODULE. " USER_COMMAND_9001 INPUT
*& Module STATUS_9001 OUTPUT
text
MODULE STATUS_9001 OUTPUT.
SET PF-STATUS 'ZCUSTOMER'.
SET TITLEBAR 'xxx'.
move itab-MANDT to zcust_call_rec-MANDT.
move itab-kunnr to zcust_call_rec-kunnr.
move itab-budat to zcust_call_rec-budat.
move itab-code to zcust_call_rec-code.
move itab-remarks to zcust_call_rec-remarks.
vcontrol-lines = sy-dbcnt.
ENDMODULE. " STATUS_9001 OUTPUT
*& Module USER_COMMAND_9002 INPUT
text
module USER_COMMAND_9002 input.
CASE sy-ucomm.
WHEN 'BACK' OR 'EXIT' OR 'CANCEL'.
SET SCREEN 0.
LEAVE SCREEN.
CLEAR sy-ucomm.
WHEN 'UPDATE'.
perform move_data.
UPDATE ZCUST_CALL_REC FROM TABLE ITAB.
IF SY-SUBRC = 0.
MESSAGE I000(0) WITH 'RECORDS ARE UPDATED'.
ELSE.
MESSAGE E001(0) WITH 'RECORDS ARE NOT UPDATED'.
ENDIF.
WHEN 'DELETE'.
perform move_data.
DELETE ZCUST_CALL_REC FROM TABLE ITAB.
IF SY-SUBRC = 0.
MESSAGE I000(0) WITH 'RECORDS ARE DELETED'.
ELSE.
MESSAGE E001(0) WITH 'RECORDS ARE NOT DELETED'.
ENDIF.
endcase.
endmodule. " USER_COMMAND_9002 INPUT
*& Module STATUS_9002 OUTPUT
text
module STATUS_9002 output.
SET PF-STATUS 'ZCUSTOMER1'.
SET TITLEBAR 'xxx'.
endmodule. " STATUS_9002 OUTPUT
*& Module update_table OUTPUT
text
module update_table output.
move itab-MANDT to zcust_call_rec-MANDT.
move itab-kunnr to zcust_call_rec-kunnr.
move itab-budat to zcust_call_rec-budat.
move itab-code to zcust_call_rec-code.
move itab-remarks to zcust_call_rec-remarks.
vcontrol-lines = sy-dbcnt.
endmodule. " update_table OUTPUT
***Selection Data
FORM SELECT_DATA.
SELECT mandt kunnr budat code remarks FROM zcust_call_rec INTO
table itab
WHERE kunnr IN r_kunnr AND BUDAT IN R_BUDAT.
ENDFORM.
****append vendor code
FORM APPEND_CUSTOMER_CODE.
clear r_kunnr.
clear itab.
clear r_budat.
refresh r_kunnr.
refresh itab.
refresh r_kunnr.
IF r_kunnr IS INITIAL
AND NOT v_kun_low IS INITIAL
AND NOT v_kun_high IS INITIAL.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = v_kun_low
IMPORTING
OUTPUT = r_kunnr-low.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = v_kun_high
IMPORTING
OUTPUT = r_kunnr-high.
r_kunnr-option = 'BT'.
r_kunnr-sign = 'I'.
append r_kunnr.
PERFORM V_BUDAT.
ELSEIF r_kunnr IS INITIAL
AND NOT v_kun_low IS INITIAL
AND v_kun_high IS INITIAL.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = v_kun_low
IMPORTING
OUTPUT = r_kunnr-low.
r_kunnr-SIGN = 'I'.
r_kunnr-OPTION = 'EQ'.
APPEND r_kunnr.
PERFORM V_BUDAT.
ELSEIF r_kunnr IS INITIAL
AND v_kun_low IS INITIAL
AND NOT v_kun_high IS INITIAL.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = v_kun_low
IMPORTING
OUTPUT = r_kunnr-low.
r_kunnr-SIGN = 'I'.
r_kunnr-OPTION = 'EQ'.
APPEND r_kunnr.
PERFORM V_BUDAT.
ELSEIF r_kunnr IS INITIAL
AND v_kun_low IS INITIAL
AND v_kun_high IS INITIAL.
IF SY-SUBRC = 0.
MESSAGE I003(0) WITH 'ENTER CUSTOMER NUMBER'.
CALL SCREEN '9000'.
ENDIF.
PERFORM V_BUDAT.
ENDIF.
ENDFORM.
FORM V_BUDAT.
IF R_BUDAT IS INITIAL
AND NOT v_BUD_low IS INITIAL
AND NOT v_BUD_high IS INITIAL.
r_budat-low = v_bud_low.
r_budat-high = v_bud_high.
r_budat-option = 'BT'.
r_budat-sign = 'I'.
append r_budat.
ELSEIF R_BUDAT IS INITIAL
AND NOT v_BUD_low IS INITIAL
AND v_BUD_high IS INITIAL.
r_budat-low = v_bud_low.
r_budat-high = v_bud_high.
r_budat-option = 'EQ'.
r_budat-sign = 'I'.
append r_budat.
ELSEIF R_BUDAT IS INITIAL
AND v_BUD_low IS INITIAL
AND NOT v_BUD_high IS INITIAL.
r_budat-HIGH = v_bud_HIGH.
r_budat-option = 'EQ'.
r_budat-sign = 'I'.
append r_budat.
ELSEIF R_BUDAT IS INITIAL
AND v_BUD_low IS INITIAL
AND v_BUD_high IS INITIAL.
IF SY-SUBRC = 0.
MESSAGE I002(0) WITH 'ENTER POSTING DATE'.
CALL SCREEN '9000'.
r_budat-low = ''.
r_budat-option = ''.
r_budat-sign = ''.
ENDIF.
ENDIF.
ENDFORM.
*& Form update
text
--> p1 text
<-- p2 text
form update .
commit work.
endform. " update
*& Form move_data
text
--> p1 text
<-- p2 text
form move_data .
clear itab.
refresh itab.
move-corresponding zcust_call_rec to itab.
MOVE ZCUST_CALL_REC-MANDT TO ITAB-MANDT.
MOVE ZCUST_CALL_REC-KUNNR TO ITAB-KUNNR.
MOVE ZCUST_CALL_REC-BUDAT TO ITAB-BUDAT.
MOVE ZCUST_CALL_REC-CODE TO ITAB-CODE.
MOVE ZCUST_CALL_REC-REMARKS TO ITAB-REMARKS.
APPEND ITAB.
delete itab where kunnr is initial.
endform. " move_data
thanks in adv
vidya -
Checking Records in multiple screens using module pool programming
Hi,
I created student registration form using module pool programming.In first SCREEN i designed like the Below.
Name: <INPUT/OUTPUT Field>
Emailid: <INPUT/OUTPUT Field>
Password:<INPUT/OUTPUT Field>
CREATE<Push Button> SIGNIN<Push Button> cancel<Push Button>
in screen 1000 I created like the above screen and i wrote the code for it.It's successfully inserted records in ZSTUDENT database.
BUT
when i call the second screen 2000.I design the screen like below.And database table is ZSTU_LOGIN.
username : <INPUT/OUTPUT Field>
password : <INPUT/OUTPUT Field>
LOGIN<push Button> EXIT<Push Button>
AND i created Third screen 3000.Like full of detail of student details like First Name,Last Name,DOB,Education Details,Contact Details etc...
BUT I'm facing the pbm is
whatever the record is stored in table ZSTUDENT-Name & password when i call the screen 2000 that USERNAME & PASSWORD are same
Then go to THIRD screen 3000.BUT i wrote the code for second screen 2000 by using SELECT statement.without my code check it will go to third
screen 3000 By the Statement of Call screen 3000.
PLZ any one help me HOW to CHECK the Exact Record From second Screen 2000 to First Screen 1000.
HOW to Check the code AND can u provide me any code available.
thanks,
AnushaHi vikram,
I wrote the code for screen 2000 like below.
MODULE STATUS_2000 OUTPUT.
* SET PF-STATUS 'xxxxxxxx'.
* SET TITLEBAR 'xxx'.
TABLES : ZSTUDENT_ENTER.
TYPES: BEGIN OF ST_TAB1,
USERNAME TYPE ZSTUDENT_ENTER-USERNAME,
PASSWORD1 TYPE ZSTUDENT_ENTER-PASSWORD1,
END OF ST_TAB1.
DATA : W_TAB1 TYPE ZSTUDENT_ENTER.
DATA : IT_TAB1 TYPE STANDARD TABLE OF ZSTUDENT_ENTER.
DATA : USERNAME TYPE CHAR50,
PASSWORD1 TYPE CHAR25.
ENDMODULE. " STATUS_2000 OUTPUT
*& Module USER_COMMAND_2000 INPUT
* text
MODULE USER_COMMAND_2000 INPUT.
CLEAR W_TAB1.
MOVE-CORRESPONDING W_TAB TO W_TAB1.
IF SY-SUBRC EQ 0.
SELECT SINGLE MAILID PASSWORD
INTO CORRESPONDING FIELDS OF W_TAB
FROM ZSTUDENT_INFO
WHERE USERNAME = W_TAB-MAILID AND
PASSWORD1 = W_TAB-PASSWORD.
CALL SCREEN 2000.
ENDSELECT.
ELSEIF SY-SUBRC NE 0.
MESSAGE 'INVALID USERNAME/PASSWORD'.
ELSEIF SY-UCOMM = 'LOGIN'.
CALL SCREEN 3000.
ENDIF.
ENDMODULE. " USER_COMMAND_2000 INPUT
But i could not found whether code is write or not.
syntax error is USERNAME is Unknown.
could solve me my pbm anybody.....
Thanks,
Anusha -
Saving Ztable using Module Pool
hi
I want to save the entries into a Ztable using Module pool programming.. I want the Module Pool Program to work like the SM30 table maintenance...
Right now.. I have 2 module pool screen on the screen... one which displays the entries of Ztable and the other which is an input enabled screen so that I can enter records into it..
When I save the records the Ztable should get updated and when the screen again comes to PBO the enetered records should be displayed in the first table control
Right now I am stuck here
PROCESS BEFORE OUTPUT.
* MODULE STATUS_0001.r45
MODULE FILL_TABLE.
LOOP AT TBL_ZTVM3 into wa_ztvm3 WITH CONTROL TC1 CURSOR TC1-TOP_LINE.
ENDLOOP.
LOOP AT TBL2_ZTVM3 into ztvm3 WITH CONTROL TC2 CURSOR TC2-TOP_LINE.
ENDLOOP.
PROCESS AFTER INPUT.
LOOP AT TBL_ZTVM3.
ENDLOOP.
LOOP AT TBL2_ZTVM3.
ENDLOOP.
MODULE USER_COMMAND_0001.
user command goes like this
*& Include YENTRIES_ZTABLE_I01
*& Module USER_COMMAND_0001 INPUT
* text
MODULE USER_COMMAND_0001 INPUT.
CASE SY-ucomm.
when 'SAVE'.
modify tbl2_ztvm3 from wa2_ztvm3 INDEX TC2-CURRENT_LINE.
ENDCASE.
ENDMODULE. " USER_COMMAND_0001 INPUT
SO quite a simple code.. but after 1 year I just lost touch with this.. I have defined the Selection Column check rows too for the table control
Can you please help me with this.. I <REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Mar 27, 2008 1:41 PMIN PAI of the Module flow logic
you need to modify the internal table with the modified content.
Like this
PROCESS AFTER INPUT.
MODULE EXIT AT EXIT-COMMAND.
MODULE CHECK_PAI.
LOOP WITH CONTROL TC.
MODULE MODIFY_DATA.
ENDLOOP.
IN side the MODIFY_DATA
You need to update the Internal table with the modified content. then your internal table will have the latest Information.
You save the latest information. -
Table maintenance by using module pool program
Hi
Please give me step by step procedure to generate table maintenance by using module pool programWhile creating table maintenance, you can go thro' the module pool program used for that.In that,in PBO part,just try making particular field active = 1 inside loop at screen.
Girish Kumar Lo...
Posts: 1,518
Questions: 2
Registered: 4/19/07
Forum points: 1,982
Re: Regarding Table maintanence generator
Posted: Jun 26, 2007 9:02 AM in response to: Younus Khan Reply E-mail this post
here is the code for that
REPORT ZTAB_MAINT
NO STANDARD PAGE HEADING
MESSAGE-ID ZZ.
T Y P E D E C L A R A T I O N S
*--Types declaration for selection to be passed as parameter into
*--VIEW_MAINTENANCE_CALL FM
TYPES: BEGIN OF TP_RANGETAB.
INCLUDE STRUCTURE VIMSELLIST.
TYPES: END OF TP_RANGETAB.
D A T A D E C L A R A T I O N S
DATA: V_MATNR TYPE MATNR, " Material Number
V_WERKS TYPE WERKS_D, " Plant
V_KONOB TYPE KONOB, " Product allocation object
V_ZCPLT(40) TYPE C. " Message
I N T E R N A L T A B L E D E C L A R A T I O N S
Internal table to subroutine code
*Internal table used as selection for VIEW_MAINTENANCE_CALL FM
DATA: IT_RANGETAB TYPE STANDARD TABLE OF TP_RANGETAB WITH HEADER LINE.
*--Internal table used for getting the tablefields
DATA: BEGIN OF IT_HEADER OCCURS 1.
INCLUDE STRUCTURE VIMDESC.
DATA: END OF IT_HEADER.
*--Name Tabel
DATA: BEGIN OF IT_NAMTAB OCCURS 50.
INCLUDE STRUCTURE VIMNAMTAB.
DATA: END OF IT_NAMTAB.
*--Used for handling 'BT' option
DATA: BEGIN OF IT_MATNR OCCURS 0,
MATNR TYPE MATNR,
END OF IT_MATNR.
*--Used for handling 'BT' option
DATA: BEGIN OF IT_WERKS OCCURS 0,
WERKS TYPE WERKS,
END OF IT_WERKS.
*--Used for handling 'BT' option
DATA: BEGIN OF IT_KONOB OCCURS 0,
KONOB TYPE KONOB,
END OF IT_KONOB.
*--Used for handling 'BT' option
DATA: BEGIN OF IT_ZCPLT OCCURS 0,
ZCPLT(40) TYPE C,
END OF IT_ZCPLT.
I N P U T S C R E E N
SELECTION-SCREEN BEGIN OF BLOCK SELSCR WITH FRAME TITLE TEXT-001.
RANGES: R_MATNR FOR V_MATNR.
RANGES: R_WERKS FOR V_WERKS.
RANGES: R_KONOB FOR V_KONOB.
RANGES: R_ZCPLT FOR V_ZCPLT.
Select Options
SELECT-OPTIONS: S_MATNR FOR V_MATNR NO-EXTENSION, " Material
S_WERKS FOR V_WERKS NO-EXTENSION, " Plant
S_KONOB FOR V_KONOB NO-EXTENSION,
" Product allocation object
S_ZCPLT FOR V_ZCPLT NO-EXTENSION. " Plant
SELECTION-SCREEN END OF BLOCK SELSCR.
A T S E L E C T I O N S C R E E N
AT SELECTION-SCREEN.
Validate user inputs
PERFORM FRM_VALIDATIONS.
S T A R T O F S E L E C T I O N
START-OF-SELECTION.
Fetch Data from Data Base
PERFORM FRM_GET_DATA.
S U B R O U T I N E S
*& Form frm_get_data
Call the function module VIEW_MAINTENNACE_CALL to get data
based on selection criteria
FORM FRM_GET_DATA .
CALL FUNCTION 'VIEW_GET_DDIC_INFO'
EXPORTING
VIEWNAME = 'ZTAB'
TABLES
X_HEADER = IT_HEADER
X_NAMTAB = IT_NAMTAB
SELLIST = IT_RANGETAB
EXCEPTIONS
NO_TVDIR_ENTRY = 1
TABLE_NOT_FOUND = 2.
IF SY-SUBRC <> 0.
MESSAGE E002 WITH 'Error in ZTAB table'(005).
ENDIF.
CLEAR: IT_RANGETAB,
IT_RANGETAB[].
LOOP AT IT_NAMTAB.
CASE IT_NAMTAB-VIEWFIELD.
WHEN 'MATNR'.
CLEAR IT_RANGETAB.
IT_RANGETAB-VIEWFIELD = 'MATNR'.
IT_RANGETAB-TABIX = SY-TABIX.
IT_RANGETAB-DDIC = IT_NAMTAB-READONLY.
LOOP AT S_MATNR.
CASE S_MATNR-OPTION.
WHEN 'EQ'.
IT_RANGETAB-AND_OR = 'AND'.
IT_RANGETAB-OPERATOR = 'EQ'.
IT_RANGETAB-VALUE = S_MATNR-LOW.
APPEND IT_RANGETAB.
WHEN 'BT'.
IT_RANGETAB-AND_OR = 'AND'.
IT_RANGETAB-OPERATOR = 'GE'.
IT_RANGETAB-VALUE = S_MATNR-LOW.
APPEND IT_RANGETAB.
IT_RANGETAB-AND_OR = 'AND'.
IT_RANGETAB-OPERATOR = 'LE'.
IT_RANGETAB-VALUE = S_MATNR-HIGH.
APPEND IT_RANGETAB.
WHEN 'NB'.
CLEAR: R_MATNR,
R_MATNR[].
R_MATNR-SIGN = 'I'.
R_MATNR-OPTION = 'BT'.
R_MATNR-LOW = S_MATNR-LOW.
R_MATNR-HIGH = S_MATNR-HIGH.
APPEND R_MATNR.
SELECT MATNR
INTO TABLE IT_MATNR
FROM ZTAB
WHERE MATNR IN R_MATNR.
DELETE ADJACENT DUPLICATES FROM IT_MATNR COMPARING MATNR
LOOP AT IT_MATNR.
IT_RANGETAB-AND_OR = 'AND'.
IT_RANGETAB-OPERATOR = 'NE'.
IT_RANGETAB-VALUE = IT_MATNR-MATNR.
APPEND IT_RANGETAB.
ENDLOOP.
WHEN 'NE'.
IT_RANGETAB-AND_OR = 'AND'.
IT_RANGETAB-OPERATOR = 'NE'.
IT_RANGETAB-VALUE = S_MATNR-LOW.
APPEND IT_RANGETAB.
WHEN OTHERS.
IT_RANGETAB-AND_OR = 'AND'.
IT_RANGETAB-OPERATOR = S_MATNR-OPTION.
IT_RANGETAB-VALUE = S_MATNR-LOW.
APPEND IT_RANGETAB.
ENDCASE.
ENDLOOP.
WHEN 'WERKS'.
CLEAR IT_RANGETAB.
IT_RANGETAB-VIEWFIELD = 'WERKS'.
IT_RANGETAB-TABIX = SY-TABIX.
IT_RANGETAB-DDIC = IT_NAMTAB-READONLY.
LOOP AT S_WERKS.
CASE S_WERKS-OPTION.
WHEN 'EQ'.
IT_RANGETAB-AND_OR = 'AND'.
IT_RANGETAB-OPERATOR = 'EQ'.
IT_RANGETAB-VALUE = S_WERKS-LOW.
APPEND IT_RANGETAB.
WHEN 'BT'.
IT_RANGETAB-AND_OR = 'AND'.
IT_RANGETAB-OPERATOR = 'GE'.
IT_RANGETAB-VALUE = S_WERKS-LOW.
APPEND IT_RANGETAB.
IT_RANGETAB-AND_OR = 'AND'.
IT_RANGETAB-OPERATOR = 'LE'.
IT_RANGETAB-VALUE = S_WERKS-HIGH.
APPEND IT_RANGETAB.
WHEN 'NB'.
CLEAR: R_WERKS,
R_WERKS[].
R_WERKS-SIGN = 'I'.
R_WERKS-OPTION = 'BT'.
R_WERKS-LOW = S_WERKS-LOW.
R_WERKS-HIGH = S_WERKS-HIGH.
APPEND R_WERKS.
SELECT WERKS
INTO TABLE IT_WERKS
FROM MARC
WHERE WERKS IN R_WERKS.
DELETE ADJACENT DUPLICATES FROM IT_WERKS COMPARING WERKS
LOOP AT IT_WERKS.
IT_RANGETAB-AND_OR = 'AND'.
IT_RANGETAB-OPERATOR = 'NE'.
IT_RANGETAB-VALUE = IT_WERKS-WERKS.
APPEND IT_RANGETAB.
ENDLOOP.
WHEN 'NE'.
IT_RANGETAB-AND_OR = 'AND'.
IT_RANGETAB-OPERATOR = 'NE'.
IT_RANGETAB-VALUE = S_WERKS-LOW.
APPEND IT_RANGETAB.
WHEN OTHERS.
IT_RANGETAB-AND_OR = 'AND'.
IT_RANGETAB-OPERATOR = S_WERKS-OPTION.
IT_RANGETAB-VALUE = S_WERKS-LOW.
APPEND IT_RANGETAB.
ENDCASE.
ENDLOOP.
WHEN 'KONOB'.
CLEAR IT_RANGETAB.
IT_RANGETAB-VIEWFIELD = 'KONOB'.
IT_RANGETAB-TABIX = SY-TABIX.
IT_RANGETAB-DDIC = IT_NAMTAB-READONLY.
LOOP AT S_KONOB.
CASE S_KONOB-OPTION.
WHEN 'EQ'.
IT_RANGETAB-AND_OR = 'AND'.
IT_RANGETAB-OPERATOR = 'EQ'.
IT_RANGETAB-VALUE = S_KONOB-LOW.
APPEND IT_RANGETAB.
WHEN 'BT'.
IT_RANGETAB-AND_OR = 'AND'.
IT_RANGETAB-OPERATOR = 'GE'.
IT_RANGETAB-VALUE = S_KONOB-LOW.
APPEND IT_RANGETAB.
IT_RANGETAB-AND_OR = 'AND'.
IT_RANGETAB-OPERATOR = 'LE'.
IT_RANGETAB-VALUE = S_KONOB-HIGH.
APPEND IT_RANGETAB.
WHEN 'NB'.
CLEAR: R_KONOB,
R_KONOB[].
R_KONOB-SIGN = 'I'.
R_KONOB-OPTION = 'BT'.
R_KONOB-LOW = S_KONOB-LOW.
R_KONOB-HIGH = S_KONOB-HIGH.
APPEND R_KONOB.
SELECT KONOB
INTO TABLE IT_KONOB
FROM T190
WHERE KONOB IN R_KONOB.
DELETE ADJACENT DUPLICATES FROM IT_KONOB COMPARING KONOB
LOOP AT IT_KONOB.
IT_RANGETAB-AND_OR = 'AND'.
IT_RANGETAB-OPERATOR = 'NE'.
IT_RANGETAB-VALUE = IT_KONOB-KONOB.
APPEND IT_RANGETAB.
ENDLOOP.
WHEN 'NE'.
IT_RANGETAB-AND_OR = 'AND'.
IT_RANGETAB-OPERATOR = 'NE'.
IT_RANGETAB-VALUE = S_KONOB-LOW.
APPEND IT_RANGETAB.
WHEN OTHERS.
IT_RANGETAB-AND_OR = 'AND'.
IT_RANGETAB-OPERATOR = S_KONOB-OPTION.
IT_RANGETAB-VALUE = S_KONOB-LOW.
APPEND IT_RANGETAB.
ENDCASE.
ENDLOOP.
WHEN 'ZCPLT'.
CLEAR IT_RANGETAB.
IT_RANGETAB-VIEWFIELD = 'ZCPLT'.
IT_RANGETAB-TABIX = SY-TABIX.
IT_RANGETAB-DDIC = IT_NAMTAB-READONLY.
LOOP AT S_ZCPLT.
CASE S_ZCPLT-OPTION.
WHEN 'EQ'.
IT_RANGETAB-AND_OR = 'AND'.
IT_RANGETAB-OPERATOR = 'EQ'.
IT_RANGETAB-VALUE = S_ZCPLT-LOW.
APPEND IT_RANGETAB.
WHEN 'BT'.
IT_RANGETAB-AND_OR = 'AND'.
IT_RANGETAB-OPERATOR = 'GE'.
IT_RANGETAB-VALUE = S_ZCPLT-LOW.
APPEND IT_RANGETAB.
IT_RANGETAB-AND_OR = 'AND'.
IT_RANGETAB-OPERATOR = 'LE'.
IT_RANGETAB-VALUE = S_ZCPLT-HIGH.
APPEND IT_RANGETAB.
WHEN 'NB'.
CLEAR: R_ZCPLT,
R_ZCPLT[].
R_ZCPLT-SIGN = 'I'.
R_ZCPLT-OPTION = 'BT'.
R_ZCPLT-LOW = S_ZCPLT-LOW.
R_ZCPLT-HIGH = S_ZCPLT-HIGH.
APPEND R_ZCPLT.
SELECT ZCPLT
INTO TABLE IT_ZCPLT
FROM ZTAB
WHERE ZCPLT IN R_ZCPLT.
DELETE ADJACENT DUPLICATES FROM IT_ZCPLT COMPARING ZCPLT
LOOP AT IT_ZCPLT.
IT_RANGETAB-AND_OR = 'AND'.
IT_RANGETAB-OPERATOR = 'NE'.
IT_RANGETAB-VALUE = IT_ZCPLT-ZCPLT.
APPEND IT_RANGETAB.
ENDLOOP.
WHEN 'NE'.
IT_RANGETAB-AND_OR = 'AND'.
IT_RANGETAB-OPERATOR = 'NE'.
IT_RANGETAB-VALUE = S_ZCPLT-LOW.
APPEND IT_RANGETAB.
WHEN OTHERS.
IT_RANGETAB-AND_OR = 'AND'.
IT_RANGETAB-OPERATOR = S_ZCPLT-OPTION.
IT_RANGETAB-VALUE = S_ZCPLT-LOW.
APPEND IT_RANGETAB.
ENDCASE.
ENDLOOP.
ENDCASE.
ENDLOOP.
IF S_ZCPLT[] IS INITIAL.
CALL FUNCTION 'VIEW_MAINTENANCE_CALL'
EXPORTING
ACTION = 'U'
VIEW_NAME = 'ZTAB'
TABLES
DBA_SELLIST = IT_RANGETAB
EXCEPTIONS
CLIENT_REFERENCE = 1
FOREIGN_LOCK = 2
INVALID_ACTION = 3
NO_CLIENTINDEPENDENT_AUTH = 4
NO_DATABASE_FUNCTION = 5
NO_EDITOR_FUNCTION = 6
NO_SHOW_AUTH = 7
NO_TVDIR_ENTRY = 8
NO_UPD_AUTH = 9
ONLY_SHOW_ALLOWED = 10
SYSTEM_FAILURE = 11
UNKNOWN_FIELD_IN_DBA_SELLIST = 12
VIEW_NOT_FOUND = 13
MAINTENANCE_PROHIBITED = 14
OTHERS = 15.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ELSE.
CALL FUNCTION 'VIEW_MAINTENANCE_CALL'
EXPORTING
ACTION = 'U'
VIEW_NAME = 'ZTAB_ZTEST'
TABLES
DBA_SELLIST = IT_RANGETAB
EXCEPTIONS
CLIENT_REFERENCE = 1
FOREIGN_LOCK = 2
INVALID_ACTION = 3
NO_CLIENTINDEPENDENT_AUTH = 4
NO_DATABASE_FUNCTION = 5
NO_EDITOR_FUNCTION = 6
NO_SHOW_AUTH = 7
NO_TVDIR_ENTRY = 8
NO_UPD_AUTH = 9
ONLY_SHOW_ALLOWED = 10
SYSTEM_FAILURE = 11
UNKNOWN_FIELD_IN_DBA_SELLIST = 12
VIEW_NOT_FOUND = 13
MAINTENANCE_PROHIBITED = 14
OTHERS = 15.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
ENDFORM. " frm_get_data
*& Form frm_validations
Validating field values
FORM FRM_VALIDATIONS .
Material number should not be validated (10/17/2005)
CLEAR V_MATNR.
SELECT SINGLE MATNR
INTO V_MATNR
FROM MARA
WHERE MATNR IN S_MATNR.
IF SY-SUBRC <> 0.
MESSAGE E002 WITH 'Material not found'.
ENDIF.
CLEAR V_WERKS.
SELECT SINGLE WERKS
INTO V_WERKS
FROM ZTAB
WHERE WERKS IN S_WERKS.
IF SY-SUBRC <> 0.
MESSAGE E002 WITH 'Plant (WERKS) not found'(002).
ENDIF.
CLEAR V_KONOB.
SELECT SINGLE KONOB
INTO V_KONOB
FROM ZTAB
WHERE KONOB IN S_KONOB.
IF SY-SUBRC <> 0.
MESSAGE E002 WITH ' Product allocation object not found'(003).
ENDIF.
CLEAR V_WERKS.
SELECT SINGLE WERKS
INTO V_WERKS
FROM ZTAB
WHERE WERKS IN S_ZCPLT.
IF SY-SUBRC <> 0.
MESSAGE E002 WITH 'Plant (ZCPLT) not found'(004).
ENDIF.
ENDFORM. " frm_validations
reward points if it is usefull ...
Regarding Table maintanence generator -
Entering values in MARA table using module pool programming
Hi All,
I need a help from you all. I want to enter the values in the MARA table using module pool programming.
Can you please give me the detailed approach and if possible then code also as i am new to ABAP.
Thanks in AdvanceCreate the screen fields with ref to field in MARA table, once data is entered on screen by user then fill appropriate structure of FM BAPI_MATERIAL_SAVEDATA. If call to Fm BAPI_MATERIAL_SAVEDATA is successful then call FM BAPI_TRANSACTION_COMMIT to make changes permanent in database .
-
How to create subscreens in tabstrip control using module pool
hai experts,
can u plz give me step by step procedure to create subscreens in tabstrip control using module pool,hi,
You can check this program
<b> DEMO_DYNPRO_TABSTRIP_LOCAL </b>
This will help you in understanding the concept and how to create subscreens.
Regards
Nishant -
Using module pool pgm, Con't modify the table field valus
Hello frnds,
i m create one rpt using module pool pgm, click display button display the table values .
Iwant to modify some fields that changes is update to table.
Bellow coding is correct or not, how can modify the fields with save changes.
TABLES : ZRFIM1.
DATA: ZREPNO TYPE ZRFIM1-ZREPNO,
ZPLANT TYPE ZRFIM1-ZPLANT,
ZRIMNO TYPE ZRFIM1-ZRIMNO,
ZRIMDAT TYPE ZRFIM1-ZRIMDAT,
DISPLAY TYPE C,
CLEAR TYPE C,
EXIT TYPE C,
SAVE TYPE C,
OK_CODE LIKE SY-UCOMM.
data : itab type table of zrfim1 with default key.
data : wa_itab type zrfim1.
CALL SCREEN 100.
*& Module STATUS_0100 OUTPUT
text
SET PF-STATUS 'SAVE'.
AT USER-COMMAND.
module STATUS_0100 output.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.
CASE SY-UCOMM.
WHEN 'EXIT'.
LEAVE PROGRAM.
WHEN 'BACK'.
LEAVE PROGRAM.
WHEN 'DISPLAY'.
SELECT SINGLE ZREPNO ZPLANT ZRIMNO ZRIMDAT FROM ZRFIM1
INTO (ZRFIM1-ZREPNO, ZRFIM1-ZPLANT, ZRFIM1-ZRIMNO, ZRFIM1-ZRIMDAT)
WHERE ZREPNO = ZRFIM1-ZREPNO.
WHEN 'CLEAR'.
CLEAR ZRFIM1.
WHEN 'SAVE'.
select single * from zrfim1 into wa_itab where ZREPNO = ZRFIM1-ZREPNO.
wa_itab-zrepno = ZREPNO.
wa_itab-zplant = ZPLANT.
wa_itab-zrimno = ZRIMNO.
wa_itab-zrimdat = ZRIMDAT.
modify zrfim1 from wa_itab.
ENDCASE.
endmodule.
Thanks in advance.hello,
change the code like:
(IF ZRFIM1 is the structure has been used on screen)
wa_itab-zrepno = ZRFIM1-ZREPNO.
wa_itab-zplant = ZRFIM1-ZPLANT.
wa_itab-zrimno = ZRFIM1-ZRIMNO.
wa_itab-zrimdat = ZRFIM1-ZRIMDAT.
modify zrfim1 from wa_itab.
thanks
K. -
How to use module pool program in my custom report?
Hi,
I am developing a custom report in abap. I want to fetch data from a standard module pool program.I want output of this standard module pool program to be used in my standad report.Submit cannot be used with module pool programs. How can i do this?Can u please suggest?HI friend,
For this you can directly use the table fields i.e. each and every module pool screen fields will be having the table name along with its fields (which you can see by double clicking the field and selecting technical settings button) and since it is a standard module pool program that will get populated directly. So you can get the screen field values directly from the table. I think this will help. Please try and let us know wheather it is solved.
Thanks and regards,
Sri Hari Anand Kumar
Edited by: srihari.kumar on Apr 6, 2011 3:31 PM -
Guidelines for setting Application Module Pool Size Parameters?
Are there guidelines for setting the application module pool size parameters, such as initial pool size, maximum pool size, etc., based on the expected number of users or other factors? I've read the developer guide sections (ch 28-29), but still don't have a good feel for how to correctly set the optimal values for the pool configuration parameters? Even more importanty, how do I monitor the pool's efficiency during runtime to determine if the pooling parameters are configured correctly?
This will be critical to performance and scalability, so I'm looking for a way to get some visibility into how the pooling is working during production operation to assess whether there are bottlenecks/constraints/ineffeciencies?
Note I am using Tomcat as the java runtime container; ADF BC / JSF jdev 10.1.3.1
Thanks in advance and Merry Christmas!KUBA - were you able to resolve these issues and if so are there any lessons learned you can share?
I'm hoping someone from the ADF team can answer our original question including guidelines for setting pool parameters and how to monitor the pool's performance while running in production.
thanks -
How to create selections-screens to display PO using module pool program
All,
I'm new to module pool programming. Can any one please provide me where to create selections screens to display existing purchase orders using the below selection criteria in thr module pool program.,
SELECT-OPTIONS : S_LIFNR FOR EKKO-LIFNR,
S_BSART FOR EKKO-BSART,
S_BUKRS FOR EKKO-BUKRS,
S_WERKS FOR EKPO-WERKS OBLIGATORY,
S_BEDAT FOR SY-DATUM,
S_EINDT FOR EKET-EINDT,
S_EBELN FOR EKKO-EBELN,
S_MATNR FOR EKPO-MATNR.
provide me step by step to do this.Hi,
Thanks for the reply can you please let me know.
How can I create the ranges
like low and high in the selection.
Using se51 i was able to do only one i,e
example I need
purchase order number----
f4 -
f4
Can please tell me how to do this -
Tutorial for Screen programming & Module-Pool programming
Hi Experts,
I have no previous knowledge of Screen programming & Module-pool programming.
Please provide me good tutorials on those so that I can master those in a couple of days as I need to use those in my current assignment.
I require those badly.
Rewards assured.
Thanks.
Anirban.
Moderator message: please do not ask for documents or tutorials, search for available information, do not use terms that assign a higher priority to your issue compared to all others, do not promise rewards.
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
Edited by: Thomas Zloch on Nov 15, 2010 2:14 PMhai guru,
use abapdocu----- tcode give ur keyword and search it.
or
sap technical .
search in sap sdn ok.
thanks.
anji -
How to insert data into a Ztable by using module pool programming??
Hi,
I am new to ABAP, Actually I have made a Ztable now I want to insert data by using the module pool programming. In which there are all field in the first screen and there is a save button. So when ever i press SAVE button it shud update the Ztable with new entries.But actually I am not getting How can i update that??can you please send me the code for inserting data.
Thanks in Advance.
Edited by: Swapna Ram on Feb 17, 2008 12:01 AMSwapna,
Check this thread...
Custom Table updation thru table control
ALso check this..
Dialog programming -
Help in uploading image using module pool programming!!!
hi all
I need a help from you all...iam designing my company's Visitors Identity card...im workin in module pool programming,i need to know wat function module should i use to get jpg image n to display it...
i hav tried it using DP_PUBLISH_WWW_URL func module but it asks for OBJID dono wat should i give...i referred SAP_PICTURE_DEMO.....
<b>plz suggest me with some solutions to diplay image which is stored in desktop....</b>
asha.......hi,
u try this importing jpeg image in transcation oaor .
in that give class name as pictures and class type as ot and execute it.
in that u import which image u want to say for suppose a DUMMY.
FORM TOP_OF_PAGE. "#EC CALLED
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
<b>I_LOGO = 'DUMMY'</b>
"'ENJOYSAP_LOGO'
IT_LIST_COMMENTARY = GT_LIST_TOP_OF_PAGE.
ENDFORM. "TOP_OF_PAGE
this top of page u use in FM
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_BACKGROUND_ID = 'ALV_BACKGROUND'
I_CALLBACK_PROGRAM = sy-repid
I_CALLBACK_PF_STATUS_SET = gc_pf_status_set
I_CALLBACK_USER_COMMAND = GC_USER_COMMAND
<b> I_CALLBACK_TOP_OF_PAGE = 'TOP_OF_PAGE'</b>
this may solve ur problem.
Maybe you are looking for
-
How do I transfer Voice Memos files from my iPhone 6 to a PC?
-
As above. I can use Migration Assistant to move my account from my old machine, but the data are far too extensive to fit on the solid state drive. I copied my user folder over to the new hard drive, but how do I access its contents? More accurately,
-
How to write a procedure to retrieve data in a collection from a table?
create or replace type Subject as object( subject_id number, subject_Desc varchar2(50) create or replace type Subjects_All as varray(10) of Subject create table student( StudentID varchar(10), Subjects Subjects_all so how do i write a procedure to di
-
I use iMacs for work. I often send email messages with attachments using Mail. Often, when sending email messages to Windows users (they are out there still), they will reply that they cannot open "the second attachment." The message seems to "pic
-
Standard R/3 transactions with standard JSP presentation layer
Hi, folks, I have a general question about standard R/3 transactions and whether existing PAR files are out there that render the output as a JSP instead of a WebGUI or WinGUI front-end. Are there any PAR files that exist, either through iViewStudio