Calendar could not be found?

I think I solved the problem.  I went to ical then selected calendar then selected go offline.  The pop up request error Calendar could not be found message has not showed up.  I will keep everyone informed if that should change. 

We are not mind readers.
What Mac do you have and what version of OS X?

Similar Messages

  • Request error: Calendar could not be found

    I'm having trouble with iCal. How do I deal with "Request error: Calendar could not be found" message.
    Thanks

    We are not mind readers.
    What Mac do you have and what version of OS X?

  • When searching the calendar in list view, appointments erlier than a few years could not be found after search. en appointment from 1974 could not be found although it appears in the list.

    When searching the calendar in list view, en appointmet erlier than a few years could not be find although the appointmet is listed in the List wiew ???,
    An appointment from 1974 could not be found, in SEARCH MODE, although it appears in the calendar.

    Pardon me for a moment while I (politely) rant in your general direction...
    This type of response is not just unhelpful—it is the antithesis of helpful.
    This is a support forum. Its purpose is helping to resolve people's problems. Sometimes those problems are going to require long explanations or lots of information. That either comes out in the original post or over the course of several back-and-forth replies; the former produces long posts but takes less time overall than the latter.
    If you don't have the patience to read through a long post, then just move on. Posting a "too long, didn't read" comment adds nothing beneficial to anyone. All it does is reveal that the person who made that comment thinks it's important to tell everyone that their attention span is too short for anything longer than a tweet.
    Yes, my post was long. Had you read it, you might have understood why it's so long. I'm trying to provide information that people searching these forums about this problem might find helpful. I did this because when I searched for info on this problem, I found lots of people with a similar problem, but no answers that went beyond "restore from backup". Since that advice wasn't the solution for me, I decided that more information might prompt someone with more knowledge and access than I have to investigate. Since you couldn't be bothered to read it, you clearly aren't the kind of person whose attention I was hoping to catch.
    Certainly I could have made the post shorter, but I think putting it into a narrative like this makes it easier to follow and provides a context that a terse recitation of bare facts does not. If you disagree, that's your prerogative, but please don't waste everyone else's time by posting a comment just to say that you didn't read it.
    I find it appalling that someone who's able to reach Level 6 on these support forums would post a "tldr" comment. That does not reflect positively on you or these forums.
    End of rant.

  • "The attempted operation failed. An object could not be found" error when double clicking on an ics file

    Operation System: Windows 8 Pro
    System Type: 64-bit Operating System
    Office: MS Office Professional Plus 2013
    I am getting "The attempted operation failed. An object could not be found" error when I double click on an .ics file to an appointment to my calender. My outlook.com account's data file is set as default and this error only occurs if
    that is the default data file. I thought that maybe my profile is corrupted. So, I opened up a new profile with the below steps and only add my outlook.com account there:
    1-) Open up the Control Panel and go to Mail section
    2-) Click "Show Profiles"
    3-) Click "Add" and give a name to your profile.
    4-) Configure your outlook.com account (with Auto Account setup, not manual steps)
    5-) Finally, set that profile to be used always.
    Then, I opened up the Outlook 2013 and clicked on the .ics file to add that appointment but got the same error.
    Is this a known issue or specific to me?
    Thanks!

    yes, I have the same problem.
    The workaround of saving the ICS file and then importing it into the current calendar
    works, 
    but the ICS calendar
     displays in other section, NOT in the section of my old events.
    why  ??

  • "The picture could not be opened because the original image could not be found."

    "The picture XXXXX.jpg could not be opened because the original image could not be found." - I've translated from Portuguese, so it's possible to contain errors on text but I think it is clear to understand.
    This error message has appeared on my screen for a thousand times, repeatedly. I've canceled everyone, but still appears,how this error has ocurred for every picture in my library.
    I gave up, I'm tired to cancel every window. I don't know what to do. And worst, I'm not able to open Settings or any other command, only "Cancel" or "Search Image", and it opens a Finder window that doesn't give me access to iPhoto Library.

    Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  

  • Ical sync with google calender: calender could not be found

    When I try to sync Ical with google calender with Caldev protocol. I have followed all the steps in google caldev online help page http://www.google.com/support/calendar/bin/answer.py?answer=99355. But when I try to create account in Ical, it says "calender could not be found". I have tried to search in online internet forums and help pages but there is no solution. If anyone knows about this, please help me. Thanks

    Are you insinuating that I have been posting the same comment elsewhere? That I work for Calgoo? You must have some nerve, and I wish you could accuse me, if that is what you are doing, face to face, so I could reply in a more appropriate manner.
    I will refrain from saying anything else to you until you answer these questions, and limit myself to replying that I have no relationship whatsoever with Calgoo, only downloaded it yesterday, and was trying to help people who, like me, were not able to sync Google and iCal despite following the instructions given by Google.

  • The ipod could not be sync because the ipod could not be found on the network

    I plugged my ipod touch (4 gen) into my computer to  sync and charge and itunes will not sync it any more.  I the the error: the ipod could not be sync because the ipod could not be found on the network.  It says it backed up on 11/4/13 which was just 5 days ago, but it won't let me back up or restore now at this point.  It will charge the battery but that is all. Anyone know  how to correct this problem?

    Are yo set up to sync via USB vice wifi?
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reboot the computer
    - Try another USB port and cable
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                      

  • IPhone 4: "required disk could not be found" message

    Hi everyone,
    Last night I started having a weird problem that's never come up for me before. When I plug in my iPhone 4 to my computer, it goes through all the syncing stages normally, but when it gets to the 7th and final step, "transferring purchases from iPhone," at a little under half on the progress bar I get a message saying Attempting to copy to the disk "" failed. The required disk could not be found.
    If I'm trying to add music to my phone at this point (which I do manually), they will not sync up, but if I unplug the phone and plug it back in, the songs instantly appear on the phone (although the same message will come up again). I've read some other solutions on here to similar problems, and here's what I've tried so far to no avail:
    Updating phone to iOS 6.1.2 (iTunes is 10.6.3)
    deleting the app "cinemagram" (because this is the app it claims to be transferring when I get the message...which in itself is odd since it's one of the first I put on my phone)
    restarting phone
    switching USB port to back of computer rather than external hub
    switching USB cord to a newer, less worn one
    Any other ideas???

    Try to restore your phone without using your backup and set it up "as new iphone" , your backup may contain damaged files.
    Did you reset the sync history in iSync? Install itunes again? If yes, try this:
    Backup itunes library.http://support.apple.com/kb/HT1382
    Create a new user account and log in. This will give you a new calendar, so set up at least one contact and one event to be able to merge your data. Disable automatic sync in itunes. Backup your phone manually, your phone will be wiped but you can get back your data from the backup you made before. Try again to sync your phone.
    http://support.apple.com/kb/HT1414

  • Error -Account 'Down-payments clearing account' could not be found for area

    When I am trying to pass a down payment entry by debiting vedor and crediting bank with asset it is giving an error as follows.
    Account 'Down-payments clearing account' could not be found for area 01
    Message no. AU133
    Please help me to rectify the same.
    Thanks in advance
    Deepak

    HI
    Please pay attention at  the possible causes of message AU133:
    1. Error AU133:
       a) You have not defined a contra account for acquisition value postings in the Asset Accounting Customizing settings (Transaction AO90).However, this is required as of Release 4.6C because, as is the case for all other integration postings in Asset Accounting, invoice receipt postings have to be displayed in Asset Accounting via the new posting kernel to ensure an identical document
    structure.
       b) You have defined the account in Asset Accounting, however, it is not created in the affected company code.Check whether the account is correct and create it for the company code, if necessary.
    2. You have entered an asset reconciliation account for the "Contra account: Acquisition value posting" (for example, the same account as for   "Acquisition:Acquis. and production costs" account).This is not  permitted.Check whether your account determination is correct               
       (Transaction AO90) in Asset Accounting Customizing. The same applies
       for the 'Contra account: Down payment posting'.
    3. As "Contra account: Acquisition value posting" you entered an asset G/L account. If necessary change the automatic posting indicator in the G/L account master record.
    4.Check if you need  revaluation accounts in depreciation areas involved   (AO90):
      -Revaluation acquis. and production costs
      -Offsetting account: Revaluation APC
    Please run also programm RACKONTO where missing or wrong customizing
    the accoutn determinations per company code is displayed
    Also have a look at note 7595 in this regard.
    Please assign points if it useful.
    Regards
    Ravinagh Boni

  • Photoshop Image Processor.jsx could not be found. CS5

    I like to use Bridge to export groups of photos and with past versions I've been able to select photos, go to Tools>Photoshop>Image Process and select one of my custom actions.  Now I get this error: Photoshop Image Processor.jsx could not be found.
    Any thoughts?
    Thanks

    By default the image processor script should be placed in the Application
    folder (on root level, not in the user
    account)/AdobePhotoshop/presets/scripts/ image Processor.jsx
    Also by default in Bridge preferences Start up Scripts Adobe Photoshop
    should have a checkmark in front of it.
    If you changed any of these there lies your fault, if it happened to fail
    out of the blue you first should try restart Bridge holding down option key
    and choose refresh preferences.
    First check if it works now and if it does again set preferences to your
    wishes. (obvious not deselecting the PS script... )
    Now I get this error: Photoshop Image Processor.jsx could not be found.

  • AE CS6 won't export MP4. "Some of the required components could not be found."

    After Effects CS6 (from Production Premium) running on 64-bit Windows 7 Enterprise SP1.
    Processor: Intel Core i7-3930K CPU @ 3.20GHz
    AMD Radeon HD 7900 Series video card
    64 Gb Corsair Ram (DDR3)
    Quicktime 7.7.4 Installed
    Currently attempting to export a short (2 second) video based on the predefined "H.264" preset with the only alterations being that I want the VBR 1 Pass to target 3.5Mbs (though I've changed this with no difference in outcome) and I want the video to multiplex as MP4. I immediatley get the error prompt: "Some of the required components could not be found."
    *Just tried using the 3GPP multiplexer and received the same error message. If I try to use the MPEG4 format I get an "unknown exception" error.*
    I've exported literally hundreds of items as H.264 with a MP4 multiplexer on this machine with current hardware and software. And now...no dice. After Effects boots correctly (or at least it seems that way) though I think it takes a little longer than it used to (not sure if the system cache just needs to be rebuilt).
    After Effects CS6 has all available Adobe updates. Quicktime 7.7.4 is also up-to-date. Video Card driver is up-to-date.
    What could be going on? I'd prefer to skip re-installing this program. I've had to do this numerous times already with this suite throughout the past 12 months; really getting sick of the down-time during reinstall. Worth noting that I have closed the program, closed all programs, restarted computer multiple times.
    I am currently going through my Adobe program files for After Effects. I am specifically looking through the 'Support Files' directory. A couple interesting things: 1. My 'MediaIO->Codecs' directory was last updated on 11/8/2013 (perhaps an AE update??) but each of the files within said directory have a last modified date of late September. Did something get wrongfully deleted in the hypothetical update? 2. In 'Media Core plugins->Common' I again have a last modified date of 11/8/2013, but again each of my files within the common directory were last modified late September. I have many expected .prm files but NO ImporterMPEG4.prm; should I have a MPEG4 specific importer file, or does the MPEG importer file do all of the work. Also, I have no ExporterMP4 (or anything of the MPEG, MPEG2, MPEG4 flavor). Should I have one of these?
    Don't know if this last paragraph helps at all but my fingers are crossed.

    Thanks Katrina for all your help.
    I talked to an Apple tech support person. Actually, my call had to be elevated to the next support level. Joy. You are correct, there are multiple listings of the files in the error report even though there is only one copy.
    The support person had me do a few things. Here is what eventually seems to fix things:
    1) For the mp3's that DID copy but were listed as not found... Some files were duplicated so deleting the duplicate with the "!" was an easy fix. I found one file that I could search by song name in iTunes but could not find it by song name search on the iPod. Looking at the iPod playlist I found the file listed by the filename (not song name) and the file played fine. Then in iTunes I double clicked on the song name ("!" showing) and selected locate. I then pointed to the location on the NAS. Resync and now the name of the song on the iPod changed from filename to song name. The file was no longer listed in the error report.
    2) For the m4a files that didn't sync... the problem songs appeared three times in a search in iTunes. Two of the listings showed the "!" next to the name. I deleted these two for each song that didn't sync and all transferred fine afterward.
    Perhaps there is an issue with ID3 tags since I use filenames more than tags in organization. Still, I would think that iTunes would not get so confused or be a little more friendly with its errors, especially considering how long its been around.
    Thanks again for your help. Looks like I have a manual way to correct this issue.

  • Trying to sync voice memos I get "was not copied to the iphone because it could not be found"

    I recorded some "voice memos" on my iPhone 5 (iOS 6.1.3). I now just want to get them onto my computer. I have followed the instruction from other posts and selected the "Include Voice Memo" checkbox and also the "Voice Memo Genre" checkbox located on the Music tab. I then click on Sync and get the following error ... "Some of the items in the iTunes library, including ----- were not copied to the iPhone because they could not be found". So I understand that the memos were not copied to the phone ... this is good since I already have then on the phone. I want, instead for them to be copied FROM the phone to the computer. So what's the problem I thought that SYNC'ing meant copying new files from the iPhone to the computer as well as vice versa.
    The Voice Memo is toolarge for me to simply email to myself so I need to understand what is causing this so that I can get around it. I have noticed that when I attempt to "Organize Library" and check "Consolidate Files" (suggested by some forum somewhere) when I close the dialog box and sync again, that when I return to the "Consolidate Files" checkbox i see that has actually cleared itself and is no longer checked. I am not sure if this is related or not.
    I have a very business recording that is on my iPhone and MUST get this audio off the phone ASAP. Any help would be appreciated.
    Sincerely,
    gstenstrom

    The dialog tells you the path to the song is wrong/not there. Make sure you can play it in iTunes.

  • The backup of my system failed due to databases, which could not be found

    The backup of my system failed because the files named wbengine.exe could not be found.
    How can I repair this ??
    Peter Boerema

    Read the Microsoft KB @ http://support.microsoft.com/kb/981851
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

  • When I try to sync my ipod, itunes tells me certain songs could not be found

    I have just tried to sync my ipod on itunes, and a screen comes up to tell me that over 100 songs from my library cannot be synced as they could not be found.......
    They all appear in my music library, and in their relevant playlists, only now they all have an exclamation mark just to the left of the title.
    Some I have ripped from cd's and some are ones I have purchased thru the itunes store, and it is these I'm most annoyed about, as I paid to have them and now cannot play them.
    What can I do to get them to be able to play again?
    Neither the ipod or the laptop are new to me, I have been using both successfully for a number of years with no problems.
    I have tried de-authorising and then authorising my laptop, and have also restored factory setting on my ipod, but  nothing seems to work.......
    Any suggestions, please?
    Thanks

    That exclamation point means the song files cannot be found, for some reason.  They are no longer where iTunes expects to find them.  They were either moved or deleted.  Sometime, a data corruption issue on your hard drive can make files inaccessible.  You may want to check that possibility, because other files may be affected.
    Since you can still see the name, artist, and album of the missing songs in iTunes, you may want to try using Windows to do a general search of your hard drive volume, searching on the name of one of the songs (or artist or album name).  If you are using the default settings for iTunes, iTunes uses the name of song, album, and artist to name the file and directory path of the song file's storage location.  If they got moved for some reason, you may find the path to all of the missing songs by finding one song.  You can then move them back to the location where iTunes expects to find them.
    some are ones I have purchased thru the itunes store, and it is these I'm most annoyed about, as I paid to have them and now cannot play them.
    Don't be mad about those songs...   Any previous song purchase from the iTunes Store can be re-downloaded at any time at no cost.  Go to the main iTunes Store screen.  On the right side, find Purchased under QUICK LINKS.  On the Purchased screen, click on Music and find those missing songs.  There is a Not on This Computer filter there that would be useful in this case.  Next to the song name, you should see a button with a cloud symbol.  Click it to download that song.

  • Data source executive could not be found

    Hello there, I have recentley did my first dynamic website
    using coldfusion MX 7. After I uploaded all the files in the server
    of godaddy.com on a window platform which supports cfm, I had
    realised that all the DSN routes were still
    C:cfusion7\wwwroot\database\executive.Users... so I changed all the
    tags to D:\Hosting\executivemalta\database\executive.Users....
    Unfortunatley I keep on receiving the error Data source executive
    could not be found! I have also created an access database from the
    godaddy control panel and located the database to a folder called
    accesscf and changed the DSN route as instructed by godaddy.
    Unfortunatley that didn't even work. Could somebody out there be
    generous enough to help me solve this problem? The following is the
    error:
    Error Occurred While Processing Request
    Data source executive could not be found.
    The error occurred in D:\Hosting\executivemalta\index2.cfm:
    line 4
    2 : <cfset MM_redirectLoginSuccess="../homepage.cfm">
    3 : <cfset MM_redirectLoginFailed="../failed.cfm">
    4 : <cfquery name="MM_rsUser"
    datasource="#Request.DSN#">
    5 : SELECT Username,Password FROM
    D:\Hosting\executivemalta\accesscf\executive.Users WHERE
    Username='#FORM.username#' AND Password='#FORM.password#'
    6 : </cfquery>
    DATASOURCE executive
    Please try the following:
    Check the ColdFusion documentation to verify that you are
    using the correct syntax.
    Search the Knowledge Base to find a solution to your problem.
    Browser Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1;
    SV1; .NET CLR 1.1.4322)
    Remote Address 212.56.128.21
    Referrer
    http://www.the-executive.biz/index2.cfm
    Date/Time 08-Aug-06 11:17 PM
    Stack Trace (click to expand)
    at
    cfindex22ecfm807111997.runPage(D:\Hosting\executivemalta\index2.cfm:4)
    at
    cfindex22ecfm807111997.runPage(D:\Hosting\executivemalta\index2.cfm:4)
    java.sql.SQLException: Data source "executive" not found.
    at coldfusion.sql.DataSrcImpl.validate(DataSrcImpl.java:90)
    at coldfusion.sql.SqlImpl.validate(SqlImpl.java:203)
    at
    coldfusion.tagext.sql.QueryTag.doStartTag(QueryTag.java:443)
    at
    cfindex22ecfm807111997.runPage(D:\Hosting\executivemalta\index2.cfm:4)
    at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:152)
    at
    coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:343)
    at
    coldfusion.filter.CfincludeFilter.invoke(CfincludeFilter.java:65)
    at
    coldfusion.filter.ApplicationFilter.invoke(ApplicationFilter.java:210)
    at coldfusion.filter.PathFilter.invoke(PathFilter.java:86)
    at
    coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:50)
    at
    coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8)
    at
    coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38)
    at
    coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38)
    at
    coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22)
    at coldfusion.CfmServlet.service(CfmServlet.java:105)
    at
    coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:78)
    at
    jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:91)
    at
    jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
    at
    jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:257)
    at
    jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:527)
    at
    jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:204)
    at
    jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:349)
    at
    jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:457)
    at
    jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:295)
    at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)

    Hi,
    I updated Sources\SXS with fresh files and now it looks like it works?????
    /SaiTech

Maybe you are looking for