Calendar -- How to view "to do list" in two columns per day in Month view?

In OSX 10.6.8, my old Calendar would automatically go into two column view to show all my "to do" items, but 10.8.5 Calendar isn't doing this when I put over 12-14 items and just says "2 more..." instead of going to two columns and truncating them. -- Is there a way to turn this 2x column view on? or another way to show all of my to items?
Any ideas/help appreciated. TIA

the "Employee Directory" shows you the photos by default. Should not be that hard to add an url via personalizations that points to that directory.
good luck.

Similar Messages

How many mails i can send at a time per day using APEX mail system?

HI,
I am working on application, when i have written a process to send mail, i have a project where i have to send mail at a time for all the email id's
given list there are upto 5000 email id's where text body also include certain set of data from a report. thinking at a time 3000 its difficult i divided
it region wise, but still each region have 2000 odd email id's. during testing when i run the process just 950 mails i could send then i got a error
saying "ORA-20001: You have exceeded the maximum number of email messages per workspace. Please contact your administrator." so please
can any one help me to know How many mails i can send at a time per day using APEX mail system?
Thanks in advance
Gowthami

Hi jfosteroracle,
You are getting the error may be the following reason,
Check the following,
Login as ADMIN and Goto -->Manage Instance-->Instance Settings--> Mail-->Maximum Emails per workspace
Actually this number denotes the Number of mails can be sent per 24 hour for the workspace,It may exceeded.
It may be the reason.
Thank you.
Regards,
Gurujothi
Edited by: Gurujothi on Jun 27, 2012 5:54 AM

How many workbooks have been visited by end user per day

 Hi SDN's,
How many workbooks have been visited by end user per day.Is there any process to knew...
Thanks & Regardz,
Aluri

Hi Aluri,
Statistics are usually not available on workbooks. You can find out how many time a user calls up a particular query (which can be accessed by various workbooks). Because workbooks themseleves do not call up data from the infoproviders.
You can tell how many times a user has accessed a query by looking at the Statistical queries and objects. Try the following two there is a list of other queries in help that you can go through also:
http://help.sap.com/saphelp_nw2004s/helpdata/en/68/84353cf261303de10000000a11402f/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/68/84353cf261303de10000000a11402f/frameset.htm

From two given tables, how do you fetch the values from two columns using values from one column(get values from col.A if col.A is not null and get values from col.B if col.A is null)?

From two given tables, how do you fetch the values from two columns using values from one column(get values from col.A if col.A is not null and get values from col.B if col.A is null)?

Hi,
Use NVL or COALESCE:
NVL (col_a, col_b)
Returns col_a if col_a is not NULL; otherwise, it returns col_b.
Col_a and col_b must have similar (if not identical) datatypes; for example, if col_a is a DATE, then col_b can be another DATE or it can be a TIMESTAMP, but it can't be a VARCHAR2.
For more about NVL and COALESCE, see the SQL Language manual: http://docs.oracle.com/cd/E11882_01/server.112/e26088/functions119.htm#sthref1310
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all tables involved, and also post the results you want from that data.
Explain, using specific examples, how you get those results from that data.
Always say which version of Oracle you're using (e.g., 11.2.0.2.0).
See the forum FAQ: https://forums.oracle.com/message/9362002

How many workbooks have been visited by end users per day

Hi SDN's,
How many workbooks have been visited by end user per day.Is there any process to knew... Do we have any T-Codes to knew...
Thanks & Regardz,
Aluri

nope... unless you're in 7.0
the statistics before 7.0 only check queries... workaround would be to have a report on BW statistics filtering on the queries that are in your workbooks... that might give you an "idea", but if there people who run those queries outside of the workbook, it will "affect" your "statistics"

How to create a Custom List without the column "Title" ?

Maybe this one is easy as it sounds, I just want to know how to create a little list for my SharePoint application featuring 3 columns:
1 - User Name (this should be Person type - UNIQUE + Required)
2 - Report (Memo - Required)
3 - Status (Choice + Required)
The list will be used to allow the users to submit a weekly report and I don't want to include the title because there is no use to me, I know I can hide the column by customizing the list but this sounds very amateur even for a newbie like me (yeah... sounds
so cheap!), since I've been reading a lot about custom content types and I still didn't get the chance to use this properly I was wondering how I could put them to use and I guess the example here would be the best right?
I really spent some time trying but I always end getting the Title even when I try to use custom content types so I'm really giving up and asking for some help at this point.
Thanks a lot for the help!!!

Yes, you can do that. If you need a different content type with your custom fields. Following are the steps : http://www.dotnetcurry.com/ShowArticle.aspx?ID=620
After creating your custom Content Type, Click on the 'Title' filed in your custom content type.
In the 'Column Settings' make it 'Hidden (Will not appear in forms)' and click ok.
Now add this content type to your list/library.
In the list/Library go to setting and 'Advance settings' and make the 'Allow management of Content Type?' as 'yes' and click ok.
Now make default content type not visible from 'Change new button order and default content type' link in the settings page of list/library, and your contet type as 'Default'.
Create a new view, remove the 'Title' field and make that view as 'dafault' view, you can delete the 'All Items' view also if required.
Now whenever user come to that list/Library they will not see the title column and also will not appear in the 'New Item'.
Note : The 'Title' field is mandatory in all the list/library and by default added to the 'All Item' view. So, by doing above steps you are creating a new content type where 'Title' is not mandatory and also not added in default view.
get2pallav
Please click "Propose As Answer" if this post solves your problem or "Vote As Helpful" if this post has been useful to you.

How can I split a header in two columns?

Hello, for the past hour I've been trying to figure out how can I split/divide a header or footer in to two columns and then align text in the left collumn to left and the text in the right column to right.
For example:
| Header length |
| Left Align | Right Align |
The only solution I have found was adding a table to the header, but it has some weird padding underneath it, which completely screws up its position in the footer.
Anyway, I hope this makes sense and someone here knows how to do this.
I really appriciate you reading this and am looking forward to your replies,
James.

You don't need a table.
Menu > View > Show Ruler
Leave the header left aligned and click on the ruler to create a Centred tab (if required) in the middle and a right hand tab to the right. You change the tabs by right clicking on them and choosing the orientation.
Then enter your text:
Left Text [tab] Centre Text (optional) [tab] Right Text
With Facing pages you can set the Left and Right pages to be different to allow the Page numbers to the outside or inside of the spread.
Peter

How to map single input value to Two columns of Database table using format file of Bulk Copy Process

Hi All,
Am using OPENROWSET to load the file data into table, here the problem is i need to map same input value to two different columns of table, As format file doesn't allow the duplicate numbers am unable to insert same value to two columns, please help me to
find a solution for this.
i can use only OPENROWSET because i need to insert some default values also which come based on file. only the problem is how to map same input value to two different columns of table. please give me the suggestions.
Thanks,
Sudhakar

From what you say:
INSERT tbl(col1, col2)
SELECT col1, col1
FROM OPENROWSET(....)
But I guess it is more difficult. You need to give more details. What sort of data source do you have? What does your query look like? The target table?
Erland Sommarskog, SQL Server MVP, [email protected]
Hi Erland,
Thanks for your response
my source file is text file with | symbol separate for ex:
1002|eTab |V101|eTablet|V100|Logic|LT-7|Laptops|SCM
Database table have columns like
column1,column2,column3...etc, now i need to insert same value from input file into two columns for ex:
the eTab value from text file has to be insert into column2 and column3 of
table
we cannot change format file like below one
for the above situation how can we insert eTab into column2 and column3
Thanks,
Sudhakar.

How do you get the sum of two columns multipied together?

I can't seem to figure out how to get the sum of two columns multiplied together without having to manually type out each location (example: A1*B1+A2*B2+A3*B3, etc..). Though the idea seems to be rather simple, everything I have tried has only given me an error. I know there must be an easier way of doing this, but I get lost in the explanations given in 'help' area of numbers, can someone help me?

C3=SUMPRODUCT(A3:A18, B3:B18)
the function SUMPRODUCT() takes ranges and multiplies corresponding cells in the ranges, then adds them together.
I the case I show SUMPRODUCT() performs:
A3*B3 + A4*B4 + A5*B5 + A6*B6 + ... + A18*B18
If you want to perform the same operation on the whole column (s) you could modify the formula:
C3=SUMPRODUCT(A, B)

How can I share address lists between two iCloud users

My daughter and I have two different icloud accounts. We are able to share certain calendars, but I would like also to share address lists/groups. Is there a way to do this? I think you could "subscribe" to another Mobile Me user, but how is this done in ICloud?

I do understand that if we have the same Icloud account and Apple ID then they will sync automatically. We don't. I have just separated our accounts (on purpose). Via icloud we can share calendars, but I want to share address lists too. Can address lists be shared (or subscribed to) by two different icloud users with two different Apple IDs?
Anybody know?

How to Use same contact list on two iPhones

How do I use same "All Contacts list" / address book on two different iPhones? Currently using Verizon backup assistant.

Use a service which lets you sync contacts between devices e.g. Apple iCloud, Gmail with Contacts etc.

How to insert a KPI by comparing two columns

I want to compare the date value under "Start" column and date value under "BL1 Start" column and if they are same I want to use an Indicator in another field and if not same, then another indicator should be displayed in the same field.
Kindly let me know how to do it.
Regards

it is true that you cannot use any 2 parameters (user defined and P6 standard fields alike for that matter) on both sides of the "is" operator in the "if" section of the global change as a condition.
and since the use-case is there, personally i see no good reason why this cannot be so. if any-to-any field comparisons are allowed, any meaningless comparisons of different data types should simply return 0 as their truth value (condition not met) or generate global change report errors
or, more elegant solutions could include more complex "sentences" used as conditions, with more than one operator
e.g. if param_1 < param_2 - param_3,
where param_n is any field (user defined or standard)
also the choice of any parameter as well as operators from dropdown lists should be limited based on the data type of the previously selected parameter(s)
to answer your initial question, the only workaround i can think of is for you to:
*1.* create a user defined field: my_kpi
*2.* use global_change_1 to calculate the value of my_kpi, based any other n number of standard fields, udf's, and/or custom values including PS, CD, current_date_time, substring(), etc to meet your requirements.
use as many "then" lines as needed. no "if" lines required.
e.g.
my_kpi = param_1 + param_2
my_kpi = my_kpi * param_3
my_kpi = my_kpi - some_other_udf
my_kpi = my_kpi / {custom value} division by 0 should be avoided because it will generate errors
this is the equivalent of
my_kpi = ((param_1 + param_2)*param_3 - some_other_udf) / {custom value}
you will probably need one ore two lines with simple divisions or substractions to calculate some relevant value for my_kpi.
e.g.
my_kpi = CD - Planned Finish
my_kpi = my_kpi - {contingency}
*3.* create another udf: my_indicator
*4.* use global_change_2 to assign colour-coded values to my_indicator
if my_kpi < minumum threshold, then my_indicator = red, else my_indicator = green
if you want a 3-colour scale you will need an extra global change to introduce the yellow flag.
the major downside to this is that P6 does not provide (not even v7) solutions for scheduled (jobs), action-triggered or even conditional running of a global change as defined.
it would be nice to have global change batches and have global_change_n triggered by the completion of global_change_n-1, or even to embed one global change (a reference to its definition) within "then" or "else" lines of another global change.
this could significantly enhance (or totally screw up :) the business logic of P6
regards
Edited by: [email protected] on Oct 7, 2009 7:08 PM
Edited by: [email protected] on Oct 7, 2009 7:12 PM

How to create a report and summarize some columns per page

Hi all,
I need to create a HTML report using the OA Framework Extension and it needs summarize some values columns highlighted similar to what can be done when using Report6i. Is there some class or package or a region or page's parameter that permits me to do that?
I also thought to summarize the values and put them in a table with a column saying that the line is a simple value or a summary and just put those values in html table. My problem still how to hightlight the html table line when the value "summary" is being fetched.
Any suggestion????
Thanks in Advance!!!

Essentially you want to write a pl/sql function which returns a varchar2 string. The contents of the string must be a valid sql statement.
Once you have done this, you need to add a report region as type sql report and you will have the option of writing it as a query or as a function returning query. Choose function returning query and enter in the function call.
Note your function must be valid, and must be executable by your apex parsing schema.
example:
create or replace
function test_report( p1_tablename in varchar2)
return varchar2
is
v_query varchar2(4000);
begin
v_query :=
'SELECT * from '||p_tablename;
return v_query;
end test_report;Edited by: Keith Jamieson on Aug 15, 2011 4:50 PM

How to get difference the min of two columns having different conditions ?

Hello,
I am trying to write a query which staisfies the following condittion. I have a table emp which has the following colums empno,ename,deptcode,empstat_code,salary.
The salary of employees depends on the empstat_code.
For a given deptcode, I have to compare the mimimum of salaries for empstat_code 'A' with the minimum of salaries for empstat_code 'B' and then a get a difference between the two.
How can I do this, please advise.
Thanks
fm

Something like this perhaps.
create table my_emp as
select
from scott.emp
alter table my_emp add emp_stat varchar2(1);
update my_emp set emp_stat= case when mod(rownum, 2) = 0 then 'A' else 'B' end;
select * from my_emp;
TUBBY_TUBBZ?select
2        min(decode(emp_stat, 'A', sal)) as min_A_sal
3     , min(decode(emp_stat, 'B', sal)) as min_B_sal
4     , deptno
5 from
6     my_emp
7 group by
8     deptno;
         MIN_A_SAL          MIN_B_SAL             DEPTNO
               950               1250                 30
              2975                800                 20
              1300               2450                 10
3 rows selected.
Elapsed: 00:00:00.71Keeping in mind that MIN will return NULL if there are no values for a given emp_stat and deptno combination. So you would have to account for that however your business rules tell you to account for it (likely using NVL to 0)

How to make Time Machine only back up once per day?

I really really don't need time machine to back up EVERY HOUR. It's overkill for me and with the level of computing I am forcing my computer to do most of the day its VERY irritating. Is there anyway to change the settings so it only backs up once every night?

Yeah, we tried using TimeMachineEditor on a friend's laptop. There will be 2 laptops backing up, and we wanted them both to backup overnight at different times when there would be no interruptions (for user or computer). It seemed to work OK (have to check w/ them), but how do you verify when backups were actually done?
I have a couple related question to this, though, that may also be helpful for folks:
- I'm guessing Time Machine cannot do a backup when the computer is asleep, correct? If a Time Machine backup starts while the computer is 'awake', will it keep the computer from sleeping so it can finish?
- If I set a schedule in the Energy Saver preferences to 'Wake Up' the computer at midnight (before scheduled backup), and 'Sleep' later on (say 4am), does this override the other preferences set for sleep in Energy Saver? (ie - if it's set to sleep after 30min., will the computer wake up at midnight only to go back to sleep 30min. later, or will it stay 'awake' until 4am?)
- Do you need to uncheck 'Put the hard drive to sleep when possible'?

Calendar -- How to view "to do list" in two columns per day in Month view?

Similar Messages

Maybe you are looking for