Calendar Server 6.3 register SUNW.scics Resource for cluster 3.1 error

I'm have e69-1-c and e69-2-c host.
e69-1-c(Primary):solaris 10+cluster 3.1 8_05(ha successful installation)+Web Server 7.1(ha successful installation)+Access manager 7.1(ha uccessful installation)+Messaging 6.3(ha successful installation)
e69-2-c(Secondary):solaris 10+cluster 3.1 8_05(ha successful installation)+Web Server 7.1(ha successful installation)+Access manager 7.1(ha successful installation
)+Messaging 6.3(ha successful installation)
I'm install and configure Calendar 6.3 according as 《Installing and Configuring Sun Java� System Calendar Server 6.3 With Sun� Cluster 3.1 Software》.
I'm successed run ./configure -nodisplay on Primary node,and successed run successed run ./configure -nodisplay on Primary node on Secondary node.
Now I'm cannot run scrgadm -a -j mailics -t SUNW.scics -g Mail-RG -x \
Confdir_list=/opt/mailinstall/SUNWics5/cal -y Resource_dependencies=mail,mailics
tail -f /var/adm/message:
e69-2-c Cluster.RGM.rgmd: [ID 699104 daemon.error] VALIDATE failed on resource <mailics>, resource group <Mail-RG>, time used: 0% of timeout <300, seconds>
my ics.conf added:
! The following are the changes for making Calendar Server highly available.
! These lines are added at the end of the current ics.conf file:
local.server.ha.enabled="yes"
local.server.ha.agent="SUNWscics"
service.http.listenaddr="228.226.132.15"
local.hostname="mail"
local.servername="mail"
service.ens.host="mail"
service.http.calendarhostname="mail.chase.com"
local.autorestart="yes"
service.listenaddr = "228.226.132.15"
# scrgadm -pv -t SUNW.scics
Res Type name: SUNW.scics
(SUNW.scics) Res Type description: Sun Cluster Agent for Calendar
Server
(SUNW.scics) Res Type base directory: /opt/SUNWscics/bin
(SUNW.scics) Res Type single instance: False
(SUNW.scics) Res Type init nodes: All potential masters
(SUNW.scics) Res Type failover: True
(SUNW.scics) Res Type version: 1.0
(SUNW.scics) Res Type API version: 2
(SUNW.scics) Res Type installed on nodes: <All>
(SUNW.scics) Res Type packages: SUNWscics
(SUNW.scics) Res Type system: False
who can help me?

qtel wrote:
How can I resolve them ?Log a Sun support request.
Regards,
Shane.

Similar Messages

I am not able to register my Apple ID for iCloud and the error is "the maximum no of free accounts have been activated on this phone" can any one help me why I need to do

I am not able to register my Apple ID for iCloud and the error is "the maximum no of free accounts have been activated on this phone" can any one help me why I need to do

Sir, your Apple ID can be used as an iCloud account as well. They are both the same thing.
You can learn more from --> Set up your Apple ID for iCloud and iTunes - Apple Support

"Insufficient resources for this video mode" error in IMAQ for IEEE-1394 1.1

I'm using 3 Sony DFW-X700 cameras (1024x768 YUV 4:2:2) and 1 Sony XCD-X700 (1024x768 8-bit mono) connected to 2 IEEE-1394 adapter cards (3 ports each). I'm running LV 6.1 on WinXP Pro PT.
I've tried several acquisition modes, and the only one that works fine is 'continuous acquisition', using 1 buffer per camera. The problem is that I can only setup 2 color cameras and 1 mono camera. If I try to setup 3 color cameras, I get an 'insufficient resources for this video mode' error. I would like to know if it's possible to configure more memory for the acquisition buffers under IEEE-1394 so that I can avoid this error.

Habil,
You might want to try to lower the frame rate of the cameras. This error is caused because the driver is able to allocate only part of the firewire bandwidth for your image acquisition, and a three camera color acquisition requires a huge amount of bandwidth. This is currently an issue that our R&D department worked this period and is going to be resolved in the next release of the driver. This release should be ready in one month. Good luck!
Nestor.
Nestor
National Instruments

" Server Error [2009]: Failed to allocate resources for results data" IR Error

Hi,
We recently moved form 9.3.3. to 11.1.2.3 and we run only IR and SQR reports. When we run few IR reports we get the below error.
"Script(x):uncaught exception: Server Error [2009]: Failed to allocate resources for results data."
Any thought on what could be the cause. I changed the DSA setting, HTTP config settings for timeouts. I followed a oracle Knowledge base document to make sure I'm setting the right parameters still it doesn't work.
Any advise will be appreciated.
Thank you.

Hi,
Can you please try to increase the timeout settings for workspace and check the issue.
You can refer following KM article for more information :
Hyperion Interactive Reporting (IR) When Processing a BQY in Web Client and iHTML Error: "Server Error [2009] Failed To Allocate Resources To Results Data" [ID 1089121.1]
To try in 11.1.2.x check these settings in workspace :
Please go to Navigate -> Administer -> Reporting and Analysis -> Web Applications -> Right click on RA_FRAMEWORK_LWA and select Properties. A
Window pops up. In that, go to Applications tab and then go to Data Access Servlet. There are two values there
i) Hyperion Intelligence Client Polling Time(seconds) => Set this to zero
ii) DAS Response Timeout => Set this to 3600
Restart the R&A services and WebApp after this change.
Hope this information helps.
regards,
Harish.

Why does calendar server have an inbox?

It has inbox, dropbox, notifications, outbox. Just wondering if inbox and outbox were for email or just calendaring. I'm trying to figure out what email server most of you use with your calendar server.

The CalDAV protocol supported by the calendar server using the Inbox and Outbox resources to do scheduling operations. That feature is only used when you setup a CalDAv account in iCal (or other scheduling capable CalDAV clients).
There is no tie in with an email server - you are free to use whatever email infrastructure you like.

Where can I find iPlanet Calendar Server resources?

Where can I find iPlanet Calendar Server 2.0 resources on the iPlanet web site?

See the Technical Resources page at: 
http://www.iplanet.com/support/technical_resources/ics/.

Do a backup.
Quit the application.
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Select Library. Then go to Calendars.

Error when starting Netscape Calendar Server: Module: , Label: 355, Service error: #0x13209

When starting Netscape Calendar Server, the following error message appears:
 
Module: , Label: 355, Service error: #0x13209

The three ACIs listed below need to be present in the Directory Server in order
for Calendar server to work properly. Check the properties on the Base DN to
verify that the following ACIs exist. If they are not present, you will need
to add them, and the Base DN will need to be modified for your enviroment.

<OL>
<LI>ACI for allowing users to modify their own entries. 

(targetattr = "*")(version 3.0; acl "Allow self entry modification";
allow (write)userdn = "ldap:///self";) 

<LI>ACI for allowing anyone permissions to Read, Search, and Compare. 

(target="ldap:///o=basedn.com") (targetattr != "userPassword") (version
3.0; acl "Anonymous access";
allow (read, search, compare) userdn = "ldap:///anyone";) 

<LI>ACI for allowing Calendar Server admins Write access to the Base DN
(this is necessary in order for admins to add users and resources to the node).
 
(target="ldap:///o=basedn.com") (targetattr = "*") (version 3.0; acl
"Calendar Administrators Group"; 
allow(all) groupdn = "ldap:///cn=Calendar Server Admins,ou=Netscape
Servers,o=basedn.com";) 
</OL>

Hi Trinidad,
Thanks for your help!!!
1.
I didn't install EventSender and DIProxy yet, I tried first to upload and deploy the zip files, but I couldn't open the Itegration Application Explorer.
2.
The jvm.dll file is in in the folder pointed by the logs: C:\Program Files (x86)\SAP\SAP Business One Integration\jdk1.5.0_xx_sap\jre\bin\server
and it is also in C:\Program Files (x86)\SAP\SAP Business One Integration\jdk1.5.0_xx_sap_64\jre\bin\server
I tried running the file java5w.exe, but I got an error message:
Access is denied
Unable to open the service tomcat5
Thne I managed to open it by "rua as administrator".
the Java Virtual Machine path is points to the java 1.5 version folder.
Is it possible that the reason that the service can't start is related to administrator rigts??
In the properties in the Integration Service (services.msc):
It is set to be run with the local system account.
all other properties looks fine.
in the properties of the tomcat5.exe (and tomcat5w.exe , I tried both)
In the Compatibility tab I tried setting the flag "Run this program in compatibility mode for" to Vista, windows 7, and server 2008
I didn't have the option of Windows XP.
I have also set the Privilege level of: "Run this program as administrator" to true.
But still the service won't start.
What can be the problem?
What else can I check?
Thanks a lot,
Chana

How do I create a Public Group on the Calendar Server?

How do I create a Public Group on the Calendar Server?

Anyone can create Private Groups or Member Only Groups. You must be given
administrative rights to create Public Groups on the Calendar Server. The
Calendar Server Admin (SYSOP) can give anyone rights to create Public Groups by
using the uniadmrights tool.

Go to /users/unison/bin/
and run the uniadmrights
tool. Some sample syntax:

To list all users with administrative rights:
% uniadmrights -ls -host yourhostname

To give John Smith, a user on node 10000, rights to administer Public Groups:
% uniadmrights -e "S=Smith/G=John" -add -pgrp -n 10000

In Calendar Server 4.0, you also have the option of using the Admin Server GUI
to assign Administrative
rights (instead of using the command-line method) by going to User Management,
Administration Rights.

With the proper administrative rights, log into the Calendar Client. Go to Options,
Manage Groups to create a new group. Choose PUBLIC from the dropdown window,
add your users and/or resources and click OK to create the Public Group which
can be seen by all users on the local Calendar Server.

The following is info that I found in another post that I have been trying to follow.
MrHoffman New England
Re: Configure DNS - OS X Server Next Steps
Feb 13, 2011 6:36 AM (in response to Jimbooooooo)
You're setting up internal DNS services, you referenced your ISP DNS servers and you should not have, and now those servers have no translations for your hosts. This is a common misconfiguration.
See [configuring DNS on Mac OS X Server|http://labs.hoffmanlabs.com/node/1436] for how to set up your internal DNS server.
And if there are any references to your ISP DNS servers here (within your client settings, within your server settings, your Airport settings, etc), then you're usually going to have DNS and connectivity problems. You're running a server now, so you'll be running your own services, and (particularly because of NAT here) referencing only your own DNS server(s).
You may be setting up external DNS (if and when you need that), but that should happen after you set up your internal DNS. The above article has a link to setting up external DNS, when you get around to that, if/when you need in-bound connections into your LAN.

Contacts and Calendar Server, Pointless?

Hello!
MLS N00B here, not really much experience with ML Server. Only had it a few weeks, and the new Profile Managaer instead of WGM thing really messed me around, seems unstable and a little too new.
Anyway. Todays discussion comes in the shape of Contacts and Calendar server. What are they actually for?
Profile Manager pushed a payload to all users (by default) so they know where the calendar and contacts server is. This seems to be a side effect of activating the services in the Server app. However, the client computers don't actually seem to use them in any way.
No contacts, not even the Directory contacts (searching via directory is enabled) are visible in the Contacts app. Nothing 'network' based in calendars either.
Group calendars are also a mystery to me.
My question is. Where would you create a 'Group' based contact list, or a 'Group' specific calendar? and make them available automagically (using PM) to all users within that group?
I've tried creating Wiki specific calendars and assigning the correct groups and permissions, but I can't see how I'd get them in to iCal. I've even tried adding extra iCal payloads to the groups in PM and using the URL field - still nothing.
Any help is welcome, thanks guys

The 'server' Contacts and Calendars services in OS X server don't work the way you would expect — like the functionality you would see on a server app like Microsoft Exchange. That is that various users can have shared resources and/or you have server owned resources that you then make available to users/groups with individual, fine-grained permissions.
You can have 'shared' server Contacts & Calendars in OS X Server but what you have to do is setup a (dedicated) user account on which you then create various calendars and address book(s). Then in the Calendar & Contacts apps on OS X and iOS you make accounts on the clients and use that pseudo account on the server as the account — not each individual users' account on the server. So each (real) user 'shares' the pseudo user's account with, obviously, full read-write access.
It ain't beautiful... but it works.

Calendar server and address book server login fails with outlook connector

Hi all,
I have installed Java Communication Suite 5 according to the doc http://blogs.sun.com/factotum/resource/comms5-install-linux.html.
When i deploy the connector i get the pop ups saying "Server:servername:3080
Error:service not available" also
"Server:servername:80/uwc"
Error:service not available"
asking to login to calendar server and address book server.Clicking "OK" allows install.
In outlook i can send and receive mails but not the meeting requests.It gives the error "login to calendar server" when i create a meeting request.
Please let me know what i have to do to get rid of the error.The username and passwd entered is correct.
Regards,
lmeenakshy

Hi,
When i deploy the connector i get the pop ups saying
"Server:servername:3080
Error:service not available" also Do you get exactly what you say above, or have you substituted in the real server name for "Server:servername:" above?
I would check through the outlook connector deployment configuration to verify that you have inserted valid information into all of the host & port fields - perhaps check the .ini file that is created to see if it has "Server" and "servername" listed.
"Server:servername:80/uwc"
Error:service not available"You are able to log into UWC via the web-interface and access your calendar/pab and edit/modify/delete calendar & addressbook entries right? The services are all up?
asking to login to calendar server and address book
server.Clicking "OK" allows install.The outlook connector deployment software gives you the option to increase the logging level, try that and see what the logs say - what was it trying to connect to/check which failed.
In outlook i can send and receive mails but not the
meeting requests.It gives the error "login to
calendar server" when i create a meeting request.
Please let me know what i have to do to get rid of
the error.The username and passwd entered is
correct.I suspect this is more of an underlying configuration issue that needs to be sorted out, once that happens you shouldn't have to keep logging in.
Regards,
Shane.

Calendar server management

I'm knowning about the calendarserver_* commands.
I can backup and restore the entire calendar server. Can I restore calendars of one user only?
Deleting a user in Serveradmin does not delete its calendars (I tested it).
How do I delete orphaned calendars of not existent users? If I know its GUID, I can delete
the calendars and events with calendarserver_purge_principals. But what can I do, if
I don't know the old GUIDs?
Thank you.

petrahu wrote:
How do I delete orphaned calendars of not existent users?
Command to get all GUIDs having a calendar in calendar server:
/Applications/Server.app/Contents/ServerRoot/usr/bin/psql -h /Library/Server/PostgreSQL\ For\ Server\ Services/Socket/ -U _postgres caldav -c "select * from calendar_home;"
List all valid GUIDs:
calendarserver_manage_principals --list-principals {groups|users|resources|locations}
Then compare and delete calendars from non-existent GUIDs:
calendarserver_purge_principals 'non-existent GUID'

Calendar Server 4: Adding a user to a node does not add ou attribute

In Netscape Calendar Server (CS) 3.5, if I add a new user with an organizational
unit (ou)
attribute to a Calendar Server node, the server will create an
ou so that the Calendar client
will be able to use the ou
parameter to search for this user.

However, in CS 4.0, if I add a new user to an ou
and then add that user to a Calendar
node, the server does not automatically create a separate ou
attribute.

Will I need to manually add the separate ou
attribute to the ldif

No. The CS 4.0 server, unlike the CS 3.5 server, supports mapping from
Calendar Server attributes to LDAP attributes. You can find more information
on this mapping property in the Administrator's Guide for Netscape Calendar
Server 4.0 at the following URL: 

http://docs.iplanet.com/docs/manuals/calendar/ncs40/ag/appendie.htm#1025959.
 

To enable this mapping, in the [LDAP]
section of the
/users/unison/misc/unison.ini file,
add the following entry: 

attr_orgunit1 = "ou"

Is there a way to enter multiple groups? Guess I'll have to learn how to do multi input in a real custom form.The "MultiSelect" HTML Component works for me and I cant think of any other suitable component. Multiselectable List maybe. Fill the allowedValues property with a hardcoded list (*BAD*) or directly from a search on LDAP (_GOOD_) using IDM getResourceObjects FormUtil. You should find plenty of examples how to use it in the forum.
One issue I noticed, I've verified the user was added to the group using an external ldap tool (JXplorer), however now that group has disappeared from the LDAP resource browser list view.(I personally prefer the good old [lbe LDAP Browser\Editor|http://www-unix.mcs.anl.gov/~gawor/ldap/] or ldapadmin)
That shouldn't happen... Verify the group is still there, the objectclass isnt changed by IDM (really shouldnt happen...) and make double sure nobody else screwed around with it. Groups of objectclass groupOfNames and groupOfUniqueNames (and posixGroup but that's a different schema mapping) are supported by default afaik.

Invitations not being sent out on Calendar Server 6.3

We would be grateful for any help on this. We can give further details if needed, please just let us know.
Thanks very much.
Issue:
To our customers the calendars server appears to be fully operational and without error. However, when a customer creates a new event and invites other people to attend, no invites are sent out. The event creator, however, believes all is in order as no error messages appear and the list of invitees appears on the event. This was working recently. We have looked for things which have changed (e.g. disk space, size of files, corruption, recent patching, licenses expiring, etc) but have not yet found anything that has changed.
Some details of our system:
./cal/sbin/csversion
Oracle Communications Calendar Server 6.3-27.01 (built Feb 15 2011)
SunOS xxxx 5.10 Generic_142909-17 sun4u sparc SUNW,Sun-Fire-V440
In /var/opt/SUNWics5/logs/watcher.log , we get these notices and errors when we restart the service.
[20/Feb/2012:12:35:56 +1300] (Notice) Received request to restart: store admin http
[20/Feb/2012:12:35:56 +1300] (Notice) Connecting to watcher ...
[20/Feb/2012:12:36:00 +1300] (Notice) 7698
[20/Feb/2012:12:36:00 +1300] (Notice) Stopping http server 7704 ..... done
[20/Feb/2012:12:36:02 +1300] (Notice) Stopping http server 7705 ... done
[20/Feb/2012:12:36:02 +1300] (Notice) admin server is not running
[20/Feb/2012:12:36:02 +1300] (Notice) Stopping store server 7700 ............................................................... timeout
[20/Feb/2012:12:37:03 +1300] (Error) Cannot stop server store with SIGTERM, now retrying with SIGKILL
[20/Feb/2012:12:37:03 +1300] (Notice) Stopping store server 7700 ..... done
[20/Feb/2012:12:37:05 +1300] (Notice) Starting store server .... 7718
[20/Feb/2012:12:37:05 +1300] (Notice) Checking store server status ..... ready
[20/Feb/2012:12:37:07 +1300] (Notice) Starting admin server ....Watched 'csadmind' process 7725 exited abnormally
7725
[20/Feb/2012:12:37:08 +1300] (Notice) Starting http server ....[20/Feb/2012:12:37:08 +1300] (Notice) Received request to restart: store admin http
[20/Feb/2012:12:37:08 +1300] (Notice) Connecting to watcher ...
... 7727
[20/Feb/2012:12:37:13 +1300] (Notice) 7698
[20/Feb/2012:12:37:13 +1300] (Error) store failed twice in 600 seconds, will not perform restart
Watched 'csadmind' process 7844 exited abnormally
What we've done:
We have run db_verify and csdb -v check on the databases. ics50deletelog.db did have corruption, so we fixed that by using db_dump and db_load to export then import the databases.
We also purged the ics50deletelog.db database using cspurge afterwards when the dump and load didn't seem to have had an effect.
We tried putting the log level up in the /opt/SUNWics5/cal/config/ics.conf , but didn't get any more details when restarting the service (through /etc/init.d/sunwics5 restart)
Before we did the db_dump, db_load and purge:
Calendar database version: 4.0.0
Sleepycat Software: Berkeley DB 4.2.52: (December 3, 2003)
Total database size in bytes: 1465503744
Total number of calendars: 14964
Total number of events: 830842
Total number of tasks: 17351
Total number of alarms: 57181
Total number of gse entries: 9
Total number of master component entries: 24100
Total number of deletelog entries: 1779967
Total logfile size in bytes: 79262
Session database version: 3.0.0 [BerkeleyDB]
Total database size in bytes: 0
Total logfile size in bytes: 0
Counter database version: 1.0.0 [Memory Mapped Files]
Total database size in bytes: 0
After the db_dump, db_load and purge:
Calendar database version: 4.0.0
Sleepycat Software: Berkeley DB 4.2.52: (December 3, 2003)
Total database size in bytes: 1201864704
Total number of calendars: 14964
Total number of events: 830845
Total number of tasks: 17351
Total number of alarms: 55116
Total number of gse entries: 9
Total number of master component entries: 24100
Total number of deletelog entries: 1779967
Total logfile size in bytes: 5251612
Session database version: 3.0.0 [BerkeleyDB]
Total database size in bytes: 0
Total logfile size in bytes: 0
Counter database version: 1.0.0 [Memory Mapped Files]
Total database size in bytes: 0
Thanks again.

Sounds like we talking about 'Event Invitations Notifications'. These are the notifications that gets sent when some one invite you to an event. Whether you receive the notification or not depends on your preference that is stored in ldap. This can be set using the Convergence by navigating through Options-> Calendar -> Notifcations (Check "Notify me via email of new invitations or invitation changes"). The actual ldap attributes that gets stored in user's entry is below.
icsExtendedUserPrefs: ceNotifyEnable=1
icsExtendedUserPrefs: ceNotifyEmail=[email protected]
In the following cases, the user (attendee) will not get notifications even if the above preference is set.
a> Creating an event with attendees in the past. CS6, by default, suppresses notifications for past events. You can enable notifications for past events by setting the config "ine.pastnotification.enable" to "yes" in ics.conf
b> If the client creating the event requests server not to send notifications. (smtpNotify wcap param for storeevents.wcap). Outlook Connector uses this wcap param, so you won't get server notifications for the events invited using Outlook Connector. Outlook Connector sends it's own notifications directly.
I think, you are looking for these kind of notifications. The process responsible for sending these notifications is "csadmind" on the Frontend. So, you need to check admin.log on the Frontend to see if it is sending notifications or not.
Edited by: dabrain on Feb 21, 2012 9:26 AM

Calendar Server Migration from iplanet5.2 to Sunjava messaging server

Hi
Can any one help me on Calendar server migration.
How can i migrate the calendar server from iplanet 5.2 to sunjava messaging server
Users
Calendar resources
Groups
Attributes

Hi,
I assume you mean iplanet calendar server 5.1.1 to the latest calendar server (6.3). If so, I suggest you start by reading through the calendar server admin guide which goes through the steps involved and tools to use to migrate from 5.1.1 onto calendar server 6.3.
http://www.sun.com/bigadmin/hubs/comms/library/manuals.calendar.jsp
Regards,
Shane.

Messaging Server and Calendar Server Mount points for SAN

Hi! Jay,
We are planning to configure "JES 05Q4" Messaging and Calendar Servers on 2 v490 Servers running Solaris 9.0, Sun Cluster, Sun Volume Manager and UFS. The Servers will be connected to the SAN (EMC Symmetrix) for storage.
I have the following questions:
1. What are the SAN mount points to be setup for Messaging Server?
I was planning to have the following on SAN:
- /opt/SUNWmsgsr
- /var/opt/SUNWmsgsr
- Sun Cluster (Global Devices)
Are there any other mount points that needs to be on SAN for Messaging to be configured on Sun Cluster?
2. What are the SAN mount points to be setup for Calendar Server?
I was planning to have the following on SAN:
- /opt/SUNWics5
- /var/opt/SUNWics5
- /etc/opt/SUNWics5
3. What are the SAN mount points to be setup for Web Server (v 6.0) for Delegated Admin 1.2?
- /opt/ES60 (Planned location for Web Server)
Delegated Admin will be installed under /opt/ES60/ida12
Directory server will be on its own cluster. Are there any other storage needs to be considered?
Also, Is there a good document that walks through step-by-step on how to install Messaging, Calendar and Web Server on 2 node Sun Cluster.
The installation document doesn't do a good job or atleast I am seeing a lot of gaps.
Thanks

Hi,
There are basically two choices..
a) Have local binaries in cluster nodes (e.g 2 nodes) ... which means there will be two sets of binaries, one on each node in your case.
Then when you configure the software ..you will have to point the data directory to a cluster filesystem which may not be neccasarily global. But this filsystem should be mountable on both nodes.
The advantage of this method is that ... during patching and similar system maintenance activities....the downtime is minimum...
The disadvantage is that you have to maintain two sets of binaries ..i.e patch twice.
The suggested filesystems can be e.g.
/opt for local binaries
/SJE/SUNWmsgr for data (used during configure option)
This will mean installing the binaries twice...
b) Having a single copy of binaries on clustered filesystem....
This was the norm in iMS5.2 era ...and Sun would recommend this...though I have seen type a) also for iMs 5.2
This means there should no configuration files in local fs. Everything related to iPlanet on clustered filesystem.
I have not come accross type b) post SUNONE i.e 6.x .....it seems 6.x has to keep some files on the local filesystem anyway..so b) is either not possible or needs some special configuration
so may be you should try a) ...
The Sequence would be ..
After the cluster framework is ready:
1) Insall the binaries on both side
2 ) Install agent on one side
3) switch the filesytem resource on any node
4) Configure the software with the clustered FS
5) Switch the filesystem resource on the other node and useconfig of first node.
Cheers--

Calendar Server 6.3 register SUNW.scics Resource for cluster 3.1 error

Similar Messages

Maybe you are looking for