Calendars not showing up after icloud update

I cannot get to work the calendars properly on iPad after updating to icloud. On my iphone everything works fine, but the iPad won't load the calendar list. I tried the solutions proposed by apple (turning calendar app off, turning icloud off and on etc.) but the calendars simply don't show up. on icloud.com and ical on mac and iphone I see everything and sync works well there, only the ipad doesn't like the cloud I suppose...
Any hints?
Thanks,
Lars

hmm... checked a little more and came to a solution: deep inside the icloud account settings (settings->icloud->account->"erweitert" (sorry, the last option at the bottom :-)) there still was a mobileme setting, lets say although everything should have been icloud, there was a smpt mobile me server... deleted icloud account completely, set it up again, now everything works fine. strange, anyway...

Similar Messages

  • Lacie Rugged external drive will not show up after Yosemite update.

    Lacie Rugged external drive will not show up after Yosemite update.  It show up in disc utility I can't access it.

    I have the exact same issue. Have you had any luck with a solution?

  • IPhone calendars not showing up in icloud

    My iphone calendars are not showing up in iCloud.  All of my calendar data is on my iPhone. I have turned on iCloud on my phone and checked "Calendar."  I am using the same Apple ID on my phone as I am using for iCloud.  I can see how to add calendars on the iCloud service, but if I add a calendar in iCloud with the same calendar name as the calendars that are on my iphone ,they are not showing up on iCloud.  "Push" is turned to on but I can see that is pushing from the server to my iPhone and not from my iPhone to the iCloud.  What could I be doing wrong?

    Check if the calendars on your phone are on your phone or on iCloud, iCloud won't sync calendars that are just on your phone.

  • Calendar not showing up after update?

    I just did a software update and now my events aren't showing up on my mainscreen.  I have it set on the "Today" theme so that my events show up on my mainscreen.  After my update, they aren't showing up.  I have a Pearl 8130. Any ideas?

    Not sure if this is related but...(and I am on a MAC)
    I just updated my BB9000 (running 4.6.0.167) to the new Desktop Manager Software v. 1.0.3 and when I completed my sync all of the data that HAD been in iCal has been wiped.  Thankfully it is all still on the BB but I am stumped as to what has happened?  I had been successfully using the two way sync mode by making sure I made NO updates to my desktop since for SOME reason RIM refuses to have an "overwrite (or replace) MAC data with BB data" option when syncing.
    Is there something fundamental that I am missing here?  Why won't the BB data show up on my iCal Calendar?
    Thanks
    Theo
    Studio City, CA

  • ICalender events not showing up after Maverick update on iMac.

    After I updated to Maverick on my iMac, I noticed certain iCal events weren't showing up but they are showing up on my iPhone and Macbook. I know you can't sync through USB anymore - I only sync through iCloud anyways. Has anyone else experienced this?

    Hi MEB6510,
    Thanks for visiting Apple Support Communities.
    If you do not see some iCloud calendar events on your iMac after upgrading to Mavericks, the steps in this article can help:
    iCloud: Troubleshooting iCloud Calendar
    http://support.apple.com/kb/ts3999
    Cheers,
    Jeremy

  • External Volumes not Showing up after Security Update

    Here are the basics: i have a first generation PPC mac Mini (10.4.11) that has a Ministack external harddrive/hub attached to it. I installed the latest Security Update via Software Update with the drive attached (bad idea, i know) and now the drive won't mount on the desktop, does not show up in System Profiler, and doesn't even show up in Disk Utility. It DOES show up when I do a Volume listing in Terminal, so it appears to me that at some level the computer still recognizes that it's there. Also, I attached another external drive that I have and I get the same results with that.
    The additional ports on the hub portion of the drive continue to operate without any problem.
    So far I've tried repairing permissions, resetting the PMU and PRAM, even archiving and reinstalling the OS to no avail.
    Any ideas?

    Hmmm, I've heard about the worry of disconnecting externals during an update, but my Mini/PPC was updated to 10.4.11 with a Ministack v1 connected without trouble!?
    Seems you've tried about everything... how about Pulling the RAM, trying to Boot, then reinstalling the RAM?
    How about booting off the Install Disk, does it show in DU then?
    How about Does it boot into Open Firmware with CMDOption+of ?
    http://docs.info.apple.com/article.html?artnum=42642

  • Creative Cloud not showing applications after recent update

    Creative Cloud is no longer showing any applications after the recent update.  I have rebooted and still nothing. 
    I am using Windows 7 x64.

    Hi m3w_pokemon,
    When you launch CC desktop are the panels blank. If yes then navigate to C/users/User name/Appdata/Local/Adobe/OOBE/opm.db and trash it.
    Sign in with your Adobe id and the apps shoud be visible.
    Regards,
    Romit Sinha

  • IPhone not showing up after Mavericks update

    Everything is plugged in normally and since I updated to Mavericks and updated iTunes my iPhone 5 no longer shows up in iTunes and I don't know why, any help would be appreciated!

    Nevermind I never updated my iPhone, that was the issue.

  • Ipods not showing up after software update

    Since updating to itunes 8.0.2.20, I cannot access my ipods. I have three. When I plug them into my desktop machine (XP home), I hear the sound that indicates a new USB device, and the ipods will show that they're connected and charging.
    But: they don't show up in itunes, so I cannot add or delete anything to them.
    Please advise.

    Have you tried going to the App Store and finding the update there?  Or getting the updater from the Apple Downloads site: OS X Mavericks 10.9.1 Update
    OT

  • Lightroom 5.5 not showing photos after CC update! Showing gray blanks instead!

    I updated LR to 5.5 yesterday through the CC installer.
    It runs. But no photos could be displayed! All gray blanks!
    In the Dev Module one could see the historgram normally and play with the slides even. But no photo at all. Just gray previews!

    LR 5 can't read the LR CC catalog.
    When you installed CC, it made a copy of your LR 5 catalog, in the same folder.
    So use File > Open, and point LR 5 to the old catalog.

  • TS3991 Updates on Mac not showing up in iCloud

    Updates on Mac not showing up in iCloud, yet when I move document to icloud, it says it already exisit. new document not going to iCloud, exisitign docuemnts on iCloud not being updated.
    Spent the last hour trying alll the suggested tips on apple support...

    Use the Find my iPhone icon. There is no separate Find my a Mac icon. All devices show up under Find my iPhone.

  • HT4623 itune is not showing iphone after updateing to IOS6

    itune is not showing iphone after updateing to IOS6

    Have you tried the Basic Troubleshooting Steps...
    Restart... Reset... Restore from Backup...  Restore as New...
    Restart / Reset
    http://support.apple.com/kb/ht1430
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414
    If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
    Be sure to make an appointment first...

  • My ipod touch is not getting recognised after the update in my itunes library. the library is updated. and it shows the connect to itunes sign.

    my ipod touch is not getting recognised after the update in my itunes library. i have updated my library as well. but it shows the connect to itunes sign on my ipod.

    If it happened after updating iTunes on the computer see:
    iOS: Device not recognized in iTunes for Windows
    or
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
    If after updating the iOS on your iPod:
    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • I am trying to update a chart in Pages that I created in Numbers, but the refresh button does not show up after I save the Numbers file. Thoughts?

    I am trying to update a chart in Pages that I created in Numbers, but the refresh button does not show up after I save the Numbers file. Thoughts?

    It is hard to exactly understand what you have  done or not by you one sentence description. My thought is have you read in the Pages User Guide? Here is what it says about updating a chart in Pages:
    Updating a Chart Copied from a Numbers Document
    If you’ve created a chart in Numbers, you can copy it and paste it into your Pages document. After it’s been pasted into Pages, the chart remains linked to the data tables it references in Numbers. To change the chart data, open the original Numbers document and edit the data there, save the Numbers document, and then refresh the chart data in Pages.To update a chart after you’ve updated its linked Numbers table:
       Select the chart on the page and click the Refresh button that appears.
    Note: You must save the Numbers document before copying and pasting your chart into your Pages document and after editing the Numbers data tables that the chart references.
    I hope it has helped you.

  • Shared Office 365 calendars not showing up in iCal

    We are using Microsoft's Office 365 and have users with a variety of devices and applications (Mac/iCal/Mail, Windows/Outlook, iPhone, Android, etc.).
    I am the administrator of the Exchange accounts. I have created four calendars that are viewable by everyone within our organization (just general "company-wide calendars").
    Users with Outlook are able to view those shared calendars just fine. However, I'm not able to add the shared calendars with users using iCal.
    If I add them as a delegate, they can see all my calendars, but if I just share the calendar, they get a "no access" error.
    Here's where I'm setting the shared calendar permissions. I've tried setting them as Reviewer, setting the Default as Reviewer, and setting them as Owner.
    Because it works fine in Outlook, I'm wondering if it's an iCal problem. For cross-referencing purposes, here's my issue at Office 365's community: Shared calendars not showing up in Apple iCal

    Hi All, after much trial and tribulation, this works for me on BusyCal. It is an app you can get on the apple store.
    Calendar should be created then shared with the busycal user. The link does not work, but add exchange account as you would on  Mac Calendar under preference>accounts. The go to the sharing tab and  click plus and type in email of person who shared calendar. It will auto populate. For some reason it does not work under delegation in Mac Calendar
    The  key and where I spent 4 days on the phone with apple and office 365, is  that the owner of the calendar has to share their calendar, named  :"calendar" They can just click the permission "show availability only."  Once they do that, any other calendars they have created and added you  as full permissions or details, you can see. I see nothing on their  calendar called "calendar"  Not the perfect solution, but it works. BusyCal is $30
    If this does not make sense feel free  to message me or I will respond here.

Maybe you are looking for