Call Existing Asset IViews from Web Dynpro using eventing

Hi,
I am trying to pass a Equipment Number from one of my WebDynPro's converted to IVIEW to a stock IVIEW from SAP called Create Notification.
Basically I followed the example and coded
WDPortalEventing.fire("urn:com.sap.pct.plm:NotificationCreate", "equipmentID", "32000140");
I got the URN from the properties of Content Management of the portal as far as event and parameter how can I find this out since I don't have access to SAP's code.
Any help would greatly be appreciated
Cheers,
Devlin
(A java developer trying to get my hands around the SAP implementation)

Hi Devlin,
I am not sure if my post can help. In the first iView u are firing a portal event with a function name.
The namespace with the function name act as a signature.
In the second iview we have to subscribe to this using the same signature.
(Second iview)And in the place of argument called action give the name of a action which has a string parameter with the name dataObject. This will have the value you have passed.
Regards
Bharathwaj

Similar Messages

Calling a Report Program In Web Dynpro Using Submit statment

Hi all,
Can any one suggest how can i call a report program form Web Dynpro using Submit statment. I tried to call it its showing Field symbols not defined error. Is their any other ways to call Report in a Web Dynpro?. I have posted the error message when i tried using SUBMIT ZRR AND RETURN CONTROL
Field symbol has not yet been assigned.
The error occurred on the application server mnghcmsap_HRS_00 and in the work process 1 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Form: CHECKBOX_OUT of program SAPLKKBL
Form: GEN_LINE_OUT of program SAPLKKBL
Form: DATA_OUT_SIMPLE of program SAPLKKBL
Form: LIST_OUTPUT_NEW of program SAPLKKBL
Form: FIRST_LIST_DISPLAY of program SAPLKKBL
Module: LIST_DISPLAY of program SAPLKKBL
Function: K_KKB_LIST_DISPLAY of program SAPLKKBL
Method: PRINT_BACKEND of program CL_GUI_ALV_GRID===============CP
Method: SET_TABLE_FOR_FIRST_DISPLAY of program CL_GUI_ALV_GRID===============CP
Form: PBO of program SAPLSLVC_FULLSCREEN
Edited by: VINMANO on Jul 22, 2009 2:54 PM

HI,
Its possible to call report program from Web dunpro...
chk out dis link,
calling report(se38) in webdynpro abap
By the way are using field symbol anywhere and left it unassigned?
Thanks,
Divya.S

Calling a Report Program from Web Dynpro

Hi all,
I have a requirement, where i have to call a report program from web dynpro?. Wether its possible to call a report program in web dynpro?. Is we can call it, how this functionality has to be achived?

Hello,
Yes it is possible to call report using SUBMIT statement from one of the method defined in COMPONENTCONTROLLER's method tab.
Once you define the method with SUBMIT statement then call that method with proper event.
Rest configuration will remain same for ABAP webdynpro.
Hope this helps.
Thanks,
Augustin.

Portal dynamic iView from Web Dynpro ABAP?

I wish to use a "Dynamic iView" from a Web Dynpro ABAP application, but it appears the API is only available in Web Dynpro Java. Can this feature be used from Web Dynpro ABAP, or can this be accomplished in another way?
Scenario: I have two iViews on a page, one Web Dynpro ABAP and another iView whose source I want to change dynamically based on something a user clicks in the Web Dynpro ABAP.
Dynamic iView:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/44/a72c155df77038e10000000a422035/frameset.htm

So you are suggesting the WDA fires an event to a new WDJ that we would need to create that would in turn use the Dynamic iView service mentioned in that help document?

Calling iView from Web Dynpro

Hi All,
   I am trying to call a iview from webDynpro using
WDPortalNavigation.navigateAbsolute(
"ROLES://portal_content/TestFolder/Iviews/TestECCiview",
WDPortalNavigationMode.SHOW_EXTERNAL,
(String) null,
(String) null,
WDPortalNavigationHistoryMode.NO_DUPLICATIONS,
(String) null,
(String) null,
"RFKN1-RPNUM="+"71000056");
But i am getting a blank screen, instead of target iview.
Does any one have resolved this type of problem.
Thanks in advance.
Regards,
Sridhar

Hi Sridhar,
Try this code.
                    IWDWindowManager mgr = wdComponentAPI.getWindowManager();
                    IWDWindow window = mgr.createExternalWindow(
                         "../PROJECTNAME/APPLICATIONNAME?APPLIATION PARAMETER=" + XX,
                         "Edit View",
                         false);
                         window.open();
Regards,
Nakul

How can I call a java object from Web dynpro ABAP application?

I made Web dynpro ABAP application and posted it to SAP EP.
For certain business purpose, we need to call external 3rd party java object using 3rd party's java api in Web dynpro application.
Is there anybody who experienced this kind of java interface issue?
I know Web dynpro Java environment can fully support this kind of requirement. but regarding Web dynpro ABAP, I couldn't find any clue for this.
Any comment or suggestion would be greatly appreciated.
Thanks,
Raymond, ABAP Consultant

if you have jco configured, then you can make calls to java api from ABAP .
check out this weblog.
/people/gregor.wolf3/blog/2004/08/26/setup-and-test-sap-java-connector-outbound-connection
Raja

Call back-end report from Web Dynpro for ABAP

Hi Experts,
I have an web dynpro for abap application, I put it into an iView. I also have a report which have selection screen and ALV display in back-end. Now I would like to call the report from the web dynpro application and display it in the web.
What steps need to be done to do it?
Thanks,
Anthony

Anthony,
you can create a custom transaction for your report "for example ZREPORT" and then create an IVIEW for ZREPORT.
in your webdynpro you can create a button or link and in the action behind you can call OBN and pass the IVIEW parameters for the OBN call.
OBN can be found in the webdynpro wizard tool.
thanks!
Jason PV

Pass parameters dynamically to url iview from web dynpro abap

Hi,
I am trying to pass 3 key-value pairs via absolute navigation to a URL iview.
The url expected is : http://www.sap.com?field1=value1&field2=value2&field3=value3
For this, I have done the following:
1) Created a url iview with the 3 parameters in get.
2) Used the pcd location of the url iview and referred it in the navigate_absolute method.
Following is the call:
        CALL METHOD lr_port_manager->navigate_absolute
          EXPORTING
            navigation_target   = wa_navigation-target
            navigation_mode     = wa_navigation-mode
            use_sap_launcher    = abap_false
            business_parameters = l_bus_parameter_tab.
The l_bus_parameter_tab has the key-value pairs populated and I can see them populated.
However, when the url is being called the parameters are not getting passed. Am I missing anything to be passed?
Thanks.

Hi Kumar,
I have followed your reccomendation and updated the code and iview properties.
The code now looks like:
        l_parameter-key = 'userid'.
        l_parameter-value = sy-uname.
        INSERT l_parameter INTO TABLE l_bus_parameter_tab.
        l_parameter-key = 'portal'.
        l_parameter-value = 'test'.
        INSERT l_parameter INTO TABLE l_bus_parameter_tab.
        l_parameter-key = 'mode'.
        l_parameter-value = 'I'.
        INSERT l_parameter INTO TABLE l_bus_parameter_tab.
*End of business parameters population
        CALL METHOD lr_port_manager->navigate_absolute
          EXPORTING
            navigation_target   = wa_navigation-target
            navigation_mode     = wa_navigation-mode
            use_sap_launcher    = abap_true
           business_parameters = l_bus_parameter_tab.
            launcher_parameters = l_bus_parameter_tab.
However, when the method is called, it does nothing and the url does not get called.
When I manually add parameters to the url iview and preview it, it does the job.
For some reason, these parameters are not getting passed to the url iview or page.
Is there a limitation that parameters cant be passed to url iviews?

Problem with calling we02 transaction code from web dynpro

Hello everyone,
I want to skip the initial screen of we02 tcode for this i have created the URL, provided the idoc number and
used the function code DYNP_CODE=ONLI for execute button.
DATA : FINAL_URL TYPE STRING.
CONCATENATE 'host' '.port' '/sap/bc/gui/sap/its/webgui?~transaction=we02 DOCNUM-LOW='
ls_itab-docnum ';CREDAT-low=' ' ' ';DYNP_OKCODE=ONLI'
into FINAL_URL.
I am trying to pass the idoc number internally and click on execute button...so that the end user can see the idoc display directly, rather than clicking the execute button manually. But, unfortunately the function code for execute buttong (ONLI) is not working. In WE02 tcode, provided input values are appeaing correctly but not triggering the execute button.
Please help!
Thanks in advance...

Hi Rohit.,
Did u tried my previous reply., Use., & ~OKCODE=ONLI .,
http://host:8000/sap/bc/gui/sap/its/webgui?sap-system-login-basic_auth=X&sap-client=800&sap-language=EN&transaction=we02&okcode=ONLI
tis will work.,
Thanks & Regards
Kiran

Calling existing KM iView

Hi guys,
Need some advise here. I have a requirement to add a url text on my webdynpro application which will call an existing KM iView. Any ideas on this? Thanks
Regards

Hi Johan,
try this for a short introduction in how to call KM iViews from web dynpro:
- First, create a KM iView, for example, in portal_content/test/<KM iView>
(keep in mind the correct ID for your iView after creating it, it is starting with pcd:portal_content...)
- Change KM property of isolation method to URL
- Create the following code in your web dynpro and deploy it in portal:
 String temp_km = "ROLES://portal_content/test/<KM iView>";
 WDPortalNavigation.navigateAbsolute(
 temp_km,
 WDPortalNavigationMode.SHOW_EXTERNAL,
 WDPortalNavigationHistoryMode.NO_DUPLICATIONS,"");
So, in this example a popup starts with your wished kM iView. If you want to call that from an URL text in web dynpro, create an UI element from type LinkToAction and bind this source code as an action to the element.
Hope that helps.
Regards,
Frank

Trigger File Generation to a Server from Web Dynpro Application

Hi Everybody! Hope you had a good new years eve
Is it possible to generate a File on a Server outgoing from Web Dynpro?
I tried to use GUI_DOWNLOAD. But as I couldn't use the GUI_DOWNLOAD from the Web Dynpro, I wrote a Report "ZCMI_EXPORT_FILE" that generates a Text-File. When I start the Report by myself, the file gets generated. All fine.
To be able to generate the File from Web Dynpro, I created a Batch Input Function Module, that I call in the Web Dynpro. The File is not created and it does not show any errors.
Do you have any idea how i can get this working? I'd also be happy with a different approach.
Best Regards and Thanks,
Steffen
REPORT that is called with Batch Input from Web Dynpro:
call function 'ZFM_GENERATE_EXPORT'
exporting
 it_detail_record = lt_records
 is_export = gs_export
importing
 ev_string = gs_export-document
 et_dataset = data_tab
exceptions
 parameter_is_initial = 1
 others = 2.
if sy-subrc <> 0.
endif.
concatenate '\\SERVER\EXPORT\' gs_export-filename into lv_filename.
call function 'GUI_DOWNLOAD'
exporting
 filename = lv_filename
tables
 data_tab = data_tab
exceptions
 file_write_error = 1
 no_batch = 2
 gui_refuse_filetransfer = 3
 invalid_type = 4
 others = 5.
if sy-subrc <> 0.
exit.
endif.

HI,
GUI_DOWNLOAD does not get's executed in the Backgroud.
there is no way to do it as a background job.. create the folder.. transfer the file to the application server in the backgorund using OPEN DATASET... use the tcode CG3Y to download the file from the app server to your folder..

Pass Parameters to an external appl when launched from web dynpro ABAP .

I want to Pass Paramaters to an external application when launced from Web dynpro ABAP . I have successfully launched an .exe file ( Notepad / eViewHSEditor ) from Web dynpro using the logic from Standard WD_TEST_APPL_ACFEXECUTE component But I am unable to Pass paramters to the .exe file .
example :- I would like to pass parameters text1 text2 in the arugement list and I expect it opens an untitled notepad and in the file it will have parameters text1 text2 . But it is behaving in a different way . Below are the detailed steps of what I have done .
The steps that I followed :-
1) Right now I have created the white list Configuration for Notepad.exe
2) I have created 1 and 2 postions both of type string and permission Legal .
3) The Paramter Value is * for both 1 and 2 .
4) I activated the whitelist and it generated an .XML file
5)
          application = 'C:
WINDOWS
system32
notepad.exe'.
          argument = 'text1 text2' .
          co_element :- I am reading the element from the conrtext .
      co_element = wd_context->get_lead_selection( ).
      co_element_stru-attribute_name = 'ERROR'.
      co_element_stru-element = co_element.
      wd_this->acf_method_handler->if_wd_acfexecute~execute( application = application
                                                             argumentlist = argument
                                                             errorinformation = co_element_stru ).
when i execute the application , it is trying to launch a notepad with file 'text1 text2.txt' and it doesn't have one , it is asking do you want to create . If You yes, it will open notepad with name 'text1 text2.txt' . If you Pass abcd in the arugement list , if the file with name abcd.txt exists , it opens the notepad with that file name .

You try to open notepad from your PC with the same command, you will the same result.
start->run->notepad "test1 test2". You get the popup saying that "test1 test2" file is not existing. You can google it to find a way to pass the text while opening notepad and try to fit that in your WebDynpro argument. I doubt if it is possible though.

Update cluster table from Web dynpro

Hi
I am trying to export data to a cluster table from web dynpro using this statement:
EXPORT zhr_sanct_st100 FROM zhr_sanct_st100 TO DATABASE zhr_clrm(ep) ID zhr_clrm-srtfd.
same piece of code work well if I include it in a report program through se38, but If I use it in Web dynpro, it doesnt update the cluster table and there is no error shown.
please reply ASAP.
Vishal kapoor

Thanks for your immediate reply. it worked this way:
IMPORT structure name TO structure name
FROM DATABASE cluster table name
TO wa_zhr_clrm
ID zhr_clrm-srtfd.
initially i missed to insert a work area wa_zhr_clrm, which has all the key fields of the cluster table.
Regards
Vishal Kapoor

Calling Batch input from Web Dynpro - any alternatives for table updates?

Hi!
I am asked to create a screen in Web Dynpro for the GJ30 transaction (JV Cutback mapping of WBS' elements). I created a remote enabled function module which call batch input for GJ30 . Testing the Function modules direclty goes fine, but not calling the function module from WD. then I get the same error message as when I once tried to call SAP GUI from Web Dynpro ( Call transaction /submit program).
My next step is to try to create a batch input session (instead of call transaction) and run it using rsbdcsub, and then check the result of the run. But maybe this will fail of the same reason as well, and I suppose this will make the user waiting longer for the response .
I read somewhere that Web Dynpro does not support batch Input. But what can you do when there are no standard BAPI's for the update you want to do in SAP ? We are not supposed to do direct table updates.
Anyone who have struggled with the same issues and found a solution??
regards, Tine

Hi,
as BDC is calling screens and in Webdynpro ABAP you cannot use SAP GUI sceeen, you are getting short dump.
Refer CNTL_SYSTEM_ERROR in webservices from r/3 system
Thanks,
Chandra

CE 7.1 - How to call CAF services from Web Dynpro

Hi,
whats the suggested way to call caf services from web dynpro?
Of course I can use the Web Service model. But can I call caf directly?
I read something about caf web dynpro model, but I cannot find it in nwds 7.1. On some older tutorial it was in context menu of caf project, but it seems to be removed.
best regards
tom

Hi ,
The standard way is to use the web service model.
You have to expose the the services as web service and then you can use the wsdl url in the Adaptive web service model option.
The above option will be available when you click the Model in the webdynpro application and the click create new model.
Hope it helps you.
Regards,
Srinivasan Subbiah

Call Existing Asset IViews from Web Dynpro using eventing

Similar Messages

Maybe you are looking for