Calling a Report Program In Web Dynpro Using Submit statment

Hi all,
Can any one suggest how can i call a report program form Web Dynpro using Submit statment. I tried to call it its showing Field symbols not defined error. Is their any other ways to call Report in a Web Dynpro?. I have posted the error message when i tried using SUBMIT ZRR AND RETURN CONTROL
Field symbol has not yet been assigned.
The error occurred on the application server mnghcmsap_HRS_00 and in the work process 1 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Form: CHECKBOX_OUT of program SAPLKKBL
Form: GEN_LINE_OUT of program SAPLKKBL
Form: DATA_OUT_SIMPLE of program SAPLKKBL
Form: LIST_OUTPUT_NEW of program SAPLKKBL
Form: FIRST_LIST_DISPLAY of program SAPLKKBL
Module: LIST_DISPLAY of program SAPLKKBL
Function: K_KKB_LIST_DISPLAY of program SAPLKKBL
Method: PRINT_BACKEND of program CL_GUI_ALV_GRID===============CP
Method: SET_TABLE_FOR_FIRST_DISPLAY of program CL_GUI_ALV_GRID===============CP
Form: PBO of program SAPLSLVC_FULLSCREEN
Edited by: VINMANO on Jul 22, 2009 2:54 PM

HI,
Its possible to call report program from Web dunpro...
chk out dis link,
calling report(se38) in webdynpro abap
By the way are using field symbol anywhere and left it unassigned?
Thanks,
Divya.S

Similar Messages

Calling a Report Program from Web Dynpro

Hi all,
I have a requirement, where i have to call a report program from web dynpro?. Wether its possible to call a report program in web dynpro?. Is we can call it, how this functionality has to be achived?

Hello,
Yes it is possible to call report using SUBMIT statement from one of the method defined in COMPONENTCONTROLLER's method tab.
Once you define the method with SUBMIT statement then call that method with proper event.
Rest configuration will remain same for ABAP webdynpro.
Hope this helps.
Thanks,
Augustin.

Calling a Report program in Web Dynpro methods

Hi,
Can any one suggest how i can call a Report created in SE38 in Webdynpro?. I tried to call it using Submit statement. But its throwing some error.

Hi,
Please refer these links -
https://forums.sdn.sap.com/click.jspa?searchID=29253250&messageID=7731540
report list output on a webdynpro view
Please paste the error or check it in ST22.
Regards,
Lekha.

I want to write ABAP Program in web dynpro Using se80 tra.code

hi
I want to write ABAP Program in web dynpro Using se80 tra.code and to Create URL for the same.
Please let me know the steps to do.
Thanks

Hi Shiva,
I understood , you want to create a Webdynpro Applicaiton and run it.
this will help you
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cb243c45-0801-0010-eb9c-88669007f130
Regards
Abhimanyu

Call Existing Asset IViews from Web Dynpro using eventing

Hi,
I am trying to pass a Equipment Number from one of my WebDynPro's converted to IVIEW to a stock IVIEW from SAP called Create Notification.
Basically I followed the example and coded
WDPortalEventing.fire("urn:com.sap.pct.plm:NotificationCreate", "equipmentID", "32000140");
I got the URN from the properties of Content Management of the portal as far as event and parameter how can I find this out since I don't have access to SAP's code.
Any help would greatly be appreciated
Cheers,
Devlin
(A java developer trying to get my hands around the SAP implementation)

Hi Devlin,
I am not sure if my post can help. In the first iView u are firing a portal event with a function name.
The namespace with the function name act as a signature.
In the second iview we have to subscribe to this using the same signature.
(Second iview)And in the place of argument called action give the name of a action which has a string parameter with the name dataObject. This will have the value you have passed.
Regards
Bharathwaj

Creating a report in Web dynpro using OOPS concept

Hi all,
Iam new to web Dynpro, i need to create a report in Web Dynpro using oops concept. can any one guide me regarding it.
Regads,
Easter

Hi,
Please refer to these links -
DEMO_COMMON_ASSISTANCE1 -Example for standard component
http://help.sap.com/saphelp_nw04s/helpdata/EN/43/1f6442a3d9e72ce10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw04s/helpdata/EN/43/1f6442a3d9e72ce10000000a1550b0/content.htm
Regards,
Lekha.

Search help for Web Dynpro using the SAP-search help

Hi,
Im trying to create a generic search help for Web Dynpro using the SAP-search help. It should working so, that I construct a Web Dynpro-component, that gets the data of the search help from the SAP-system, interpreted it and creates the ui-elements and the needed context generic.
The mapping between the Input field of the customerview and the right search help is to be made with an xml-file, which contains the information: name of the view, the input field, the search-help-name and the name of the field that will be returned.
The xml-file is reading from a helper-class. That helper-class contains any information, witch need the search help-component as well as the customer-component.
The initialization takes place in the method wdDoModify of the customer. The call of the search help from the customer should be implement with an Action, witch is bound to a Button(create dynamic in the helper-class behind the input field).
In a second foot should be create a plugin for eclipse, witch insert the used files (search help component, helper class, ) in the project. In addition it should create the call in the customer generic.
It would be great if someone can give me a feedback!

Hi Mike,
The BlanketAgreement.exe is a reference to the executable that will be created when you compile the solution you created in Part II - Part III. I think there is a mistake in the tutorial because it asks you to name the project 'Blanket' which means that by default the executable will be called Blanket.exe and not BlanketAgreement.exe. The tutorial also misses the step asking you to compile the Blanket project before you go on to create an installer. You should compile your Blanket project in Release mode before creating an installer. By compiling the project you'll get a Blanket.exe file in the bin folder of your Blanket project which you then need to add to the installer per the instructions.
SAP do offer development courses in some areas and there is training material here on the SDN and on the SAP partner portal (and maybe the customer portal as well). Try searching this forum for 'training' or 'tutorial' and you should get a few links. There's also a development certification.
Personally I'd recommend you give yourself a little project to work on and just get stuck in
Kind Regards,
Owen

Calling a report program in another program.

can we call on report program in another report program. If yes, please give me the right syntax. Thanks in Advance.

Hi,
Use SUBMIT AND RETURN statement. In below given codes,
I'm sending an internal table t_spfli to a memory id abc. After that I'm calling another program by using SUBMIT <program name> AND RETURN.
Check these two programs
PROGRAM 1
REPORT z_abap_memory.
DATA:
w_carrid TYPE spfli-carrid,
BEGIN OF fs_spfli,
    carrid LIKE spfli-carrid,
    connid LIKE spfli-connid,
    fltime LIKE spfli-fltime,
END OF fs_spfli.
DATA:
t_spfli LIKE
    TABLE OF
          fs_spfli.
SELECT-OPTIONS:
s_carrid FOR w_carrid.
START-OF-SELECTION.
PERFORM get_spfli.
PERFORM disp_spfli.
AT LINE-SELECTION.
IF sy-lsind EQ 1.
    EXPORT t_spfli TO MEMORY ID 'ABC'.
    SUBMIT z_ABAP_MEMORY1 AND RETURN.
ENDIF.
END-OF-SELECTION.
PERFORM disp_spfli.
*&      Form get_spfli
*       text
* --> p1        text
* <-- p2        text
FORM get_spfli .
SELECT carrid
         connid
         fltime
    FROM spfli
    INTO TABLE t_spfli
   WHERE carrid IN s_carrid.
ENDFORM.                    " get_spfli
*&      Form disp_spfli
*       text
* --> p1        text
* <-- p2        text
FORM disp_spfli .
LOOP AT t_spfli INTO fs_spfli.
    WRITE: / fs_spfli-carrid,
             fs_spfli-connid,
             fs_spfli-fltime.
         HIDE:
    fs_spfli-carrid,
    fs_spfli-connid.
ENDLOOP.
ENDFORM.                    " disp_spfli
PROGRAM 2
REPORT z_abap_memory1.
DATA:
BEGIN OF fs_spfli,
    carrid LIKE spfli-carrid,
    connid LIKE spfli-connid,
    fltime LIKE spfli-fltime,
END OF fs_spfli,
fs_fl LIKE fs_spfli.
DATA:
BEGIN OF fs_flight,
    carrid LIKE sflight-carrid,
    connid LIKE sflight-connid,
    fldate LIKE sflight-fldate,
END OF fs_flight.
DATA:
t_spfli LIKE
    TABLE OF
          fs_spfli.
DATA:
t_fl LIKE t_spfli.
DATA:
t_flight LIKE
     TABLE OF
           fs_flight.
IMPORT t_spfli FROM MEMORY ID 'ABC'.
t_fl = t_spfli.
SELECT carrid
       connid
       fldate
FROM sflight
INTO TABLE t_flight
FOR ALL ENTRIES IN t_spfli
WHERE carrid = t_spfli-carrid
   AND connid = t_spfli-connid.
LOOP AT t_flight INTO fs_flight.
WRITE: / fs_flight-carrid,
           fs_flight-connid,
           fs_flight-fldate.
ENDLOOP.
Regards
Abhijeet

Calling one report program from another

Hi All,
i am calling one report program from my program & exporting it's output to SAP-SPOOL using SUBMIT statement. I want to fetch the spool no in my program for this spool. Please guide me how this can be achieved? i have tried SYST- SPONO but it's not working.
Thanks & Regards,
Chetan.

Hi,
Initially check this it might be helpful to u.
http://help.sap.com/saphelp_sm40/helpdata/en/30/cc154219fce12ce10000000a1550b0/content.htm.
Even use the function module slike Job_open , Job_close this is also one of the methid to achive spool requests.
Regards,
Sana.
Reward with points if found helpful..

How to call legacy system screen in web dynpro for java?

Now I'm using Netweaver CE for building BPM (Business Process Management).
In BPM system, I wana call legacy system screen(ERP, C/S , Web, etc..) in web dynpro.
I'v already known how to call legacy system method and data.( using RMI, SOAP and RFC )
But I don't konw how to call legacy system screen.
If there is no way calling legacy system screen, I will have to build every screen using web dynpro.
It's so terrible.
So I think there is a way calling legacy system screen.
It's just my opinion.
If It can call legacy system screen in web dynpro, please let me know how to call it.
Or, If there is no way calling legacy system, how solve I this problem?
Thank you reading my question.

I assume that with "legacy system screen" you mean ABAP Dynp sceens. Of cause it would be attractive to integrate into new BPM processes. However there is a conceptional issue: You could easily integrate them e.g. into a WebDypro using a URL to to the so-called WebGUI (the ITS that makes Dynp screens Web enabled).
However the Dynp screen store all there state in the ABAP backend. This information is not available to to the process engine, e.g. to set the Task to completed or to use the data in Output Mapping.
In fact you need a way to wrap the how UI transaction into a WebDynpro screen including data flow.

Show BI report in a Web Dynpro App

Hello,
I would like to insert a BI report into a Web Dynpro App, this is because I have some specials requirements like using a dynamic tree for selecting the user desired report and pass two parameters to this report via URL for example, this is why I cant use standard BW iView to show this reports.
Any hint, suggestion or advice is really appreciated here.
Best regards.

Hi Ramien,
See this link,
Re: BW server details from webdynpro
Hope this helps you
Regards
Rohit

HI Masters , I need information for file upload program in web dynpro java

Hi masters,
i need some inforamtion and documentation on file upload program in web dynpro java

Hi surya,
You can follow this procedure to upload the file
i) Take One Context Attribute named as "D1" of Type "binary".
ii) Take one FileUpload UI Element in the Layout Tab.
iii) Bind FileUpload UI Element's data Property to the taken Context Attribute. Here it is "D1".
iv) Take one Button UI Element in the Layout Tab named "Upload" and in the Action of that Button write the following Code.
v) The following code Generates one Folder in the Server & inside that Folder given file is Uploaded.
File ff=new File("FolderXYZ"); // Creates One Folder with the given Name ( Here Folder name is "FolderXYZ")
ff.mkdir();
try
byte b[]=null;
IWDAttributeInfo objAttinfo=null;
IWDModifiableBinaryType binType=null;
File f=null;
FileOutputStream fos=null;
if(wdContext.currentContextElement().getD1()!=null)
b=wdContext.currentContextElement().getD1();
objAttinfo=wdContext.getNodeInfo().getAttribute(IPrivateAttachView.IContextElement.D1);
binType=(IWDModifiableBinaryType)objAttinfo.getModifiableSimpleType();
f=new File(ff.getName()+"
"+binType.getFileName());
fos=new FileOutputStream(f);
fos.write(b);
fos.flush();
fos.close();
objMessageManager.reportSuccess("File uploaded to server");
} catch (Exception e)
objMessageManager.reportException("Unable to upload file to server, error is:"+e,false);
return;
The Uploaded file is stored in the folder & that folder is stored in the Server's following Path.
<Your Server>\c$\usr\sap\J2E\JC00\j2ee\cluster\server0
You can access your Uploaded file from the following Path
<Your Server>\c$\usr\sap\J2E\JC00\j2ee\cluster\server0\FolderXYZ
Regards
Sagar Ingalwar

Can we call a report program or schemas in Routine [dynamic action] ???

Dear SAP Crew,
In dynamic action, we can call routines through indicatiors.
In that routine, Can we call a report program or schemas???
Kindly clarify with some scenario.
Thks & Rgds
Krish Sathya

Hi Krish,
In the routine you should be able to SUBMIT the program/report you need to execute.
Cheers,
Aditya

How to create documentation for report programs and how to use it

how to create documentation for report programs and how to use it in the selection screen by placing an icon in the Applicatin Tool bar. If i click this icon the help documentation has to display.
Note: Exaple <b>RSTXSCRP</b> programs selection screen

Hi
1 goto SE38 transaction, give the program name
2 Click on documentation radiobutton & then press change
3 Write your PURPOSE, PREREQUISITES etc details
4 Save the same & Activae it.
The icon will come automatically on selection screen
Thanks
Sandeep
Reward if useful

Itz possible to call one report program into another program

hi guys,
i had a doubt that can i call a report program into another report program by declaring their name into the second program like as we calling Includes ,function modules and like class and their methods .
if anybody done this or know how to do this, give me the details and explination about this friends
if it possible with screenshots and codings
Thanks & Regards
Saigijeo

Please search before posting, do not ask basic questions here.
Always do your own work before turning to the community with specific problems.
Thread locked.
Thomas
[Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers]

Calling a Report Program In Web Dynpro Using Submit statment

Similar Messages

Maybe you are looking for