Call forward to external number which has auto attendant

Hi
I am a voice administrator in my company
I want to forward all of my calls to my Other location's number.
Other location has only POTS line and to reach my extension user needs to go through Auto attendant menu.
Is it possible to enter a digit pattern in call forward destination in CUCM so that it can take care of Auto attendant menu of my Other location and land on my number?
We have CUCM 8 running.
Please help!!
Ashwin

Hello Ashwin,
"Other location has only POTS line and to reach my extension user needs to go through Auto attendant menu."
What type of phone system and voice mail is providing the auto attendant?
How are the POTS lines(analog only correct?) terminated into the phone system?

Similar Messages

CUCM 8.6 Call Forwarding to External Number Issue

Hello,
Call forwarding worked without problems, we could forward our phones to external numbers and everything was ok, when somebody called to my phone, I could got the call to my cell phone.
But now when I forward my phone to external number and try to call to my phone I get busy trigger.
We didn't change configuration or install any update.
I think its my ISP-s problem, to whom we have SIP Trunk.
I don't understand log file, so can you tell what is the problem?
Here is log:
057729XXXX is called party, cell phone number
original calling party number is 240XXXXX, but it is forwarded to 2484XXX
INVITE sip:2484XXX@ISP-IP:5060 SIP/2.0
Via: SIP/2.0/UDP MY-CUCM-IP:5060;branch=z9hG4bK1003a84126249
From: <sip:057729XXXX@MY-CUCM>;tag=4052091~294be736-ce3b-450f-a7f1-c801f3cc9a7e-27746002
To: <sip:2484XXX@ISP-IP>
Date: Wed, 18 Dec 2013 13:34:18 GMT
Call-ID: 16d82e80-2b11a45a-c43e7-84450d0a@MY-CUCM-IP
Supported: timer,resource-priority,replaces
Min-SE: 1800
User-Agent: Cisco-CUCM8.6
Allow: INVITE, OPTIONS, INFO, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY
CSeq: 101 INVITE
Expires: 180
Allow-Events: presence
Supported: X-cisco-srtp-fallback
Supported: Geolocation
Cisco-Guid: 0383266432-0000065536-0000191815-2219117834
Session-Expires: 1800
P-Asserted-Identity: <sip:057729XXXX@MY-CUCM-IP>
Remote-Party-ID: <sip:057729XXXX@MY-CUCM-IP>;party=calling;screen=yes;privacy=off
Contact: <sip:057729XXXX@MY-CUCM-IP:5060>
Max-Forwards: 68
Content-Type: application/sdp
Content-Length: 215
v=0
o=CiscoSystemsCCM-SIP 4052091 1 IN IP4 MY-CUCM-IP
s=SIP Call
c=IN IP4 MY-CUCM-IP
t=0 0
m=audio 29790 RTP/AVP 8 101
a=rtpmap:8 PCMA/8000
a=ptime:20
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
|2,100,56,1.173711429^MY-CUCM-IP^MTP_3
17:34:18.526 |EnvProcessUdpPort - EnvProcessUdpHandler::fireSignal() varId = 2|2,100,56,1.173711429^MY-CUCM-IP^MTP_3
17:34:18.526 |EnvProcessUdpHandler::fireSignal - SEND: index = 2, handler = 0xb2d59c98|*^*^*
17:34:18.526 |EnvProcessUdpPort::fireSignal - SEND, destination = ISP-IP:5060|*^*^*
17:34:18.526 |EnvProcessUdpPort - EnvProcessUdpHandler::send(buff, 1172, ISP-IP:5060)|*^*^*
17:34:18.536 |EnvProcessUdpHandler::handle_input - handle = 334|*^*^*
17:34:18.536 |EnvProcessUdpHandler::handle_input   Status: 0, Id: 2|*^*^*
17:34:18.536 |//SIP/SIPUdp/wait_UdpDataInd: Incoming SIP UDP message size 358 from ISP-IP:[5060]:
[12623361,NET]
SIP/2.0 100 Trying
Call-ID: 16d82e80-2b11a45a-c43e7-84450d0a@MY-CUCM-IP
CSeq: 101 INVITE
From: <sip:057729XXXX@MY-CUCM-IP>;tag=4052091~294be736-ce3b-450f-a7f1-c801f3cc9a7e-27746002
To: <sip:2484XXX@ISP-IP>;tag=sip+1+b3a00013+867def6a
Via: SIP/2.0/UDP MY-CUCM-IP:5060;branch=z9hG4bK1003a84126249
Server: CISCO-SBC/2.x
Content-Length: 0
|2,100,230,1.4901096^ISP-IP^*
17:34:18.536 |//SIP/Stack/Info/0x0/ccsip_spi_get_msg_type returned: 2 for event 1|2,100,230,1.4901096^ISP-IP^*
17:34:18.536 |//SIP/Stack/Transport/0x0/context=(nil)|2,100,230,1.4901096^ISP-IP^*
17:34:18.536 |//SIP/Stack/Transport/0x0/gConnTab=0xf484290, addr=ISP-IP, port=5060, connid=2, transport=UDP|2,100,230,1.4901096^ISP-IP^*
17:34:18.536 |//SIP/Stack/Info/0x0/Return existing connection for port 5060 connId 2|2,100,230,1.4901096^ISP-IP^*
17:34:18.536 |//SIP/Stack/Info/0x0/Checking Invite Dialog|2,100,230,1.4901096^ISP-IP^*
17:34:18.536 |//SIP/Stack/Info/0xb1b50c90/INVITE response with no RSEQ - disable IS_REL1XX|2,100,230,1.4901096^ISP-IP^*
17:34:18.536 |//SIP/SIPHandler/ccbId=0/scbId=0/sip_stop_timer: type=SIP_TIMER_TRYING value=500 retries=3|2,100,230,1.4901096^ISP-IP^*
17:34:18.536 |//SIP/Stack/States/0xb1b50c90/0xb1b50c90 : State change from (STATE_SENT_INVITE, SUBSTATE_NONE) to (STATE_RECD_PROCEEDING, SUBSTATE_PROCEEDING_PROCEEDING)|2,100,230,1.4901096^ISP-IP^*
17:34:18.536 |//SIP/SIPHandler/ccbId=0/scbId=0/sip_stop_timer: type=SIP_TIMER_EXPIRES value=180000 retries=0|2,100,230,1.4901096^ISP-IP^*
17:34:18.536 |//SIP/SIPHandler/ccbId=0/scbId=0/sip_start_timer: type=SIP_TIMER_EXPIRES value=180000 retries=0|2,100,230,1.4901096^ISP-IP^*
17:34:18.561 |EnvProcessUdpHandler::handle_input - handle = 334|*^*^*
17:34:18.561 |EnvProcessUdpHandler::handle_input   Status: 0, Id: 2|*^*^*
17:34:18.561 |//SIP/SIPUdp/wait_UdpDataInd: Incoming SIP UDP message size 396 from ISP-IP:[5060]:
[12623362,NET]
SIP/2.0 403 Forbidden
Call-ID: 16d82e80-2b11a45a-c43e7-84450d0a@MY-CUCM-IP
CSeq: 101 INVITE
From: <sip:057729XXXX@MY-CUCM-IP>;tag=4052091~294be736-ce3b-450f-a7f1-c801f3cc9a7e-27746002
To: <sip:2484XXX@ISP-IP>;tag=sip+1+b3a00013+867def6a
Via: SIP/2.0/UDP MY-CUCM-IP:5060;branch=z9hG4bK1003a84126249
Server: CISCO-SBC/2.x
Content-Length: 0
Contact: <sip:ISP-IP:5060>
[12623363,NET]
ACK sip:2484XXX@ISP-IP:5060 SIP/2.0
Via: SIP/2.0/UDP MY-CUCM-IP:5060;branch=z9hG4bK1003a84126249
From: <sip:057729XXXX@MY-CUCM-IP>;tag=4052091~294be736-ce3b-450f-a7f1-c801f3cc9a7e-27746002
To: <sip:2484XXX@ISP-IP>;tag=sip+1+b3a00013+867def6a
Date: Wed, 18 Dec 2013 13:34:18 GMT
Call-ID: 16d82e80-2b11a45a-c43e7-84450d0a@MY-CUCM-IP
Max-Forwards: 70
CSeq: 101 ACK
Allow-Events: presence
Content-Length: 0
INVITE sip:2484XXX@ISP's-Other-IP:5062 SIP/2.0
Via: SIP/2.0/UDP MY-CUCM-IP:5062;branch=z9hG4bK1003a95b8f3900
From: <sip:057729XXXX@MY-CUCM-IP>;tag=4052092~294be736-ce3b-450f-a7f1-c801f3cc9a7e-27746002
To: <sip:2484XXX@ISP's-Other-IP>
Date: Wed, 18 Dec 2013 13:34:18 GMT
Call-ID: 16d82e80-2b11a45a-c43e8-84450d0a@MY-CUCM-IP
Supported: timer,resource-priority,replaces
Min-SE: 1800
User-Agent: Cisco-CUCM8.6
Allow: INVITE, OPTIONS, INFO, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY
CSeq: 101 INVITE
Expires: 180
Allow-Events: presence
Supported: X-cisco-srtp-fallback
Supported: Geolocation
Cisco-Guid: 0383266432-0000065536-0000191816-2219117834
Session-Expires: 1800
P-Asserted-Identity: <sip:057729XXXX@MY-CUCM-IP>
Remote-Party-ID: <sip:057729XXXX@MY-CUCM-IP>;party=calling;screen=yes;privacy=off
Contact: <sip:057729XXXX@MY-CUCM-IP:5062>
Max-Forwards: 68
Content-Type: application/sdp
Content-Length: 215
v=0
o=CiscoSystemsCCM-SIP 4052092 1 IN IP4 MY-CUCM-IP
s=SIP Call
c=IN IP4 MY-CUCM-IP
t=0 0
m=audio 29792 RTP/AVP 8 101
a=rtpmap:8 PCMA/8000
a=ptime:20
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
|2,100,56,1.173711431^MY-CUCM-IP^MTP_3
17:34:18.567 |EnvProcessUdpPort - EnvProcessUdpHandler::fireSignal() varId = 0|2,100,56,1.173711431^MY-CUCM-IP^MTP_3
17:34:18.567 |EnvProcessUdpHandler::fireSignal - SEND: index = 0, handler = 0xa6b4d7c0|*^*^*
17:34:18.567 |EnvProcessUdpPort::fireSignal - SEND, destination = ISP's-Other-IP:5062|*^*^*
17:34:18.567 |EnvProcessUdpPort - EnvProcessUdpHandler::send(buff, 1177, ISP's-Other-IP:5062)|*^*^*
17:34:18.569 |EnvProcessUdpHandler::handle_input - handle = 335|*^*^*
17:34:18.569 |EnvProcessUdpHandler::handle_input   Status: 0, Id: 0|*^*^*
17:34:18.569 |//SIP/SIPUdp/wait_UdpDataInd: Incoming SIP UDP message size 394 from ISP's-Other-IP:[5062]:
[12623365,NET]
SIP/2.0 100 trying -- your call is important to us
Via: SIP/2.0/UDP MY-CUCM-IP:5062;branch=z9hG4bK1003a95b8f3900;rport=5062
From: <sip:057729XXXX@MY-CUCM-IP>;tag=4052092~294be736-ce3b-450f-a7f1-c801f3cc9a7e-27746002
To: <sip:2484XXX@ISP's-Other-IP>
Call-ID: 16d82e80-2b11a45a-c43e8-84450d0a@MY-CUCM-IP
CSeq: 101 INVITE
Server: kamailio (3.3.1 (x86_64/linux))
Content-Length: 0
17:34:18.587 |//SIP/SIPUdp/wait_UdpDataInd: Incoming SIP UDP message size 375 from ISP's-Other-IP:[5062]:
[12623366,NET]
SIP/2.0 403 Forbidden
Via: SIP/2.0/UDP MY-CUCM-IP:5062;branch=z9hG4bK1003a95b8f3900;rport=5062
Call-ID: 16d82e80-2b11a45a-c43e8-84450d0a@MY-CUCM-IP
From: <sip:057729XXXX@MY-CUCM-IP>;tag=4052092~294be736-ce3b-450f-a7f1-c801f3cc9a7e-27746002
To: <sip:2484XXX@ISP's-Other-IP>;tag=dc6a4ae7
CSeq: 101 INVITE
Reason: Q.850;cause=0;text="unknown"
Content-Length: 0
|2,100,230,1.4901099^ISP's-Other-IP^*
[12623367,NET]
ACK sip:2484XXX@ISP's-Other-IP:5062 SIP/2.0
Via: SIP/2.0/UDP MY-CUCM-IP:5062;branch=z9hG4bK1003a95b8f3900
From: <sip:057729XXXX@MY-CUCM-IP>;tag=4052092~294be736-ce3b-450f-a7f1-c801f3cc9a7e-27746002
To: <sip:2484XXX@ISP's-Other-IP>;tag=dc6a4ae7
Date: Wed, 18 Dec 2013 13:34:18 GMT
Call-ID: 16d82e80-2b11a45a-c43e8-84450d0a@MY-CUCM-IP
Max-Forwards: 70
CSeq: 101 ACK
Allow-Events: presence
Content-Length: 0

SIP/2.0 403 Forbidden error
If your router is sending a SIP/2.0 403 Forbidden error to the SIP server you are registered to, there is a good chance your router is blocking the incoming call due to the toll-faud prevention feature that was added to IOS version 15.1(2)T.
How to Identify if TOLLFRAUD_APP is Blocking Your Call
If the TOLLFRAUD_APP is rejecting the call, it generates a Q.850       disconnect cause value of 21, which represents ‘Call Rejected’. The       debug voip ccapi inout command can be run to       identify the cause value.
Additionally, voice iec syslog can be       enabled to further verify if the call failure is a result of the toll-fraud       prevention. This configuration, which is often handy to troubleshoot the origin       of failure from a gateway perspective, will print out that the call is being       rejected due to toll call fraud. The CCAPI and Voice IEC output is demonstrated       in this debug output:
%VOICE_IEC-3-GW: Application Framework Core: Internal Error (Toll fraud call rejected):
IEC=1.1.228.3.31.0 on callID 3 GUID=F146D6B0539C11DF800CA596C4C2D7EF
000183: *Apr 30 14:38:57.251: //3/F146D6B0800C/CCAPI/ccCallSetContext:
   Context=0x49EC9978
000184: *Apr 30 14:38:57.251: //3/F146D6B0800C/CCAPI/cc_process_call_setup_ind:
   >>>>CCAPI handed cid 3 with tag 1002 to app "_ManagedAppProcess_TOLLFRAUD_APP"
000185: *Apr 30 14:38:57.251: //3/F146D6B0800C/CCAPI/ccCallDisconnect:
   Cause Value=21, Tag=0x0, Call Entry(Previous Disconnect Cause=0, Disconnect Cause=0)
The Q.850 disconnect value that is returned for blocked calls can also       be changed from the default of 21 with this command:
voice service voip
ip address trusted call-block cause
How to Return to Pre-15.1(2)T Behavior
Source IP Address Trust List
There are three ways to return to the previous behavior of voice       gateways before this trusted address toll-fraud prevention feature was       implemented. All of these configurations require that you are already running       15.1(2)T in order for you to make the configuration change.
Explicitly enable those source IP addresses from which you would like           to add to the trusted list for legitimate VoIP calls. Up to 100 entries can be           defined. This below configuration accepts calls from those host           203.0.113.100/32, as well as from the network 192.0.2.0/24. Call setups from           all other hosts are rejected. This is the recommended method from a voice           security perspective.
voice service voip
ip address trusted list
ipv4 203.0.113.100 255.255.255.255
ipv4 192.0.2.0 255.255.255.0
Configure the router to accept incoming call setups from all source           IP addresses.
voice service voip
ip address trusted list
ipv4 0.0.0.0 0.0.0.0
Disable the toll-fraud prevention application completely.
voice service voip
no ip address trusted authenticate
Two-Stage Dialing
If two-stage dialing is required, the following can be configured to       return behavior to match previous releases.
For inbound ISDN calls:
voice service pots
no direct-inward-dial isdn
For inbound FXO calls:
voice-port
secondary dialtone

Call forward to external number(mobile)

Dears please help me on this
voice translation-rule 1
rule 1 /2837599/ /599/
rule 6 /2837596/ /596/
rule 7 /.*2837555/ /123/
2837... are my SIP DID nos
123 is my AA extn
596 and 599 is an ip phone exten
i need to transfer directly to an external no (mobile no) when i call 2837596 from outside without extension
what is the config to be done

dears , i tried it but call not forwarding please need our help
voice translation-rule 1
rule 13 /.*2837499/ /499/
ephone-dn 499 dual-line
number 499
label website
description 499
call-forward all 90504495705
corlist incoming user-international
ephone 37
device-security-mode none
video
mac-address 001E.F727.F567
ephone-template 16
username "700" password 700
type 7911
button 1:499
pin 1700

IB:How to update a serial Number which has Inventory Material Transactions?

Dear friends
first of all thanks for your time and valuable solutions
Install base: How to update a serial Number which has Inventory Material Transactions
problem description:
Install base > quick search
Here is Installbase record, when I query from quick search
Rec#     Item          Item Instance           Serial Number          Status
1     300-7000-01      3000000           1000XXX-0538JQ0003 Return for Adv Exchange
2     300-7000-01     8000000               1000XXX-0538JQ0003-     Return for Adv Exchange
3     300-7000-01     5000000               1000XXX-0538JQ0003-A     Return for Adv Exchange
looking above data, first and third records are the legitimate serial numbers(correct according to the client specs), second record is not legitimate since it has a dash as suffix, we found there are many illegitimate serial Numbers exists, needs to be updated with the right serial Numbers which I analyzed in excel after pulling data from mtl_material_transactions , oe_order_lines_all , mtl_serial_numbers , mtl_system_items_b
basically these are all RMAs
I need to update the second record as 1094SUZ-0538JQ0003-B as per the guidelines, while updating I need to keep all the existing contracts, Warranty, what ever material transations it has, need to be same.
we have a package updating the serial numbers using IB API (csi_Item_Instance_Pub.update_item_instance) but it is updating only the records which has no serial numbers present for that instance, if there is a serial number already exists it is not working.
user define error msg "Serial Number 1094SUZ-0538JQ0003- has Inventory Material Transactions. This serial number cannot be used to update an existing Item Instance", but I need to update this anyway!! or am I missing something here, please advice me
below post looks like similar issue, talks about hard update, I have no clue, by doing that the updated serial number will have same transations, contracts, dates....attached to it like the previous serial number
IB UPDATE_ITEM_INSTANCE ERROR - doesn't allow ACTIVE_START_DATE to change
would be great If you guys help me out, really appreciated!!
unfortunately I couldn't find any solutoin in metalink for the existing serial number update
code for updating the serial number using IB API
          x_msg_count := 0;
x_msg_data := '';
p_instance_rec.instance_id := rec.child_instance_id;
p_instance_rec.serial_number := rec.child_serial_number;
p_instance_rec.object_version_number := rec.child_object_number;
p_txn_rec.transaction_id := Fnd_Api.g_miss_num;
p_txn_rec.transaction_date := SYSDATE;
p_txn_rec.source_transaction_date := SYSDATE;
p_txn_rec.transaction_type_id := 1;
csi_Item_Instance_Pub.update_item_instance
p_api_version => 1.0,
p_commit => Fnd_Api.g_false,
p_init_msg_list => Fnd_Api.g_false,
p_validation_level => 1,
p_instance_rec => p_instance_rec,
p_ext_attrib_values_tbl => p_ext_attrib_values_tbl,
p_party_tbl => p_party_tbl,
p_account_tbl => p_account_tbl,
p_pricing_attrib_tbl => p_pricing_attrib_tbl,
p_org_assignments_tbl => p_org_assignments_tbl,
p_asset_assignment_tbl => p_asset_assignment_tbl,
p_txn_rec => p_txn_rec,
x_instance_id_lst => x_instance_id_lst,
x_return_status => x_return_status,
x_msg_count => x_msg_count,
x_msg_data => x_msg_data
Thanks
Suri

Suri
Used this. May not be perfect but should get you there. Only if the table is registered (all the seeded tables should be registered) this will work.
select distinct a.table_name,b.column_name from fnd_tables a, fnd_columns b
where a.table_id=b.table_id
and upper(b.column_name) like '%SERIAL%'
Also this is very old one but if you need history for this change add the history insert logic as well..
DECLARE
l_return_err VARCHAR2 (80);
PROCEDURE debug (p_message IN VARCHAR2)
IS
BEGIN
dbms_output.put_line (SUBSTR (p_message, 1, 255));
END debug;
BEGIN
debug('======================================================================');
debug('Switching from serial number XDT07406. to XDT07406 ');
debug('======================================================================');
UPDATE fa_additions_b
SET serial_number = 'XDT07406'
WHERE serial_number = 'XDT07406.';
debug('No of rows in fa_additions_b updated :'||sql%rowcount);
UPDATE fa_mass_additions
SET serial_number = 'XDT07406'
WHERE serial_number = 'XDT07406.';
debug('No of rows in fa_mass_additions updated :'||sql%rowcount);
UPDATE rcv_serial_transactions
SET serial_num = 'XDT07406'
WHERE serial_num = 'XDT07406.';
debug('No of rows in rcv_serial_transactions updated :'||sql%rowcount);
UPDATE mtl_serial_numbers
SET serial_number = 'XDT07406'
WHERE serial_number = 'XDT07406.';
debug('No of rows in mtl_serial_numbers updated :'||sql%rowcount);
UPDATE mtl_unit_transactions
SET serial_number = 'XDT07406'
WHERE serial_number = 'XDT07406.';
debug('No of rows in mtl_unit_transactions updated :'||sql%rowcount);
UPDATE csi_item_instances_h
SET new_serial_number = 'XDT07406'
WHERE new_serial_number = 'XDT07406.';
debug('No of rows in csi_item_instances_h updated :'||sql%rowcount);
UPDATE csi_t_txn_line_details
SET serial_number = 'XDT07406'
WHERE serial_number = 'XDT07406.';
debug('No of rows in csi_t_txn_line_details updated :'||sql%rowcount);
UPDATE csi_item_instances
SET serial_number = 'XDT07406'
WHERE serial_number = 'XDT07406.';
debug('No of rows in csi_item_instances updated :'||sql%rowcount);
UPDATE wsh_delivery_details
SET serial_number = 'XDT07406'
WHERE serial_number = 'XDT07406.';
debug('No of rows in wsh_delivery_details updated :'||sql%rowcount);
debug('======================================================================');
debug('Switching from serial number jct20591 to JCT20591 ');
debug('======================================================================');
UPDATE fa_additions_b
SET serial_number = 'JCT20591'
WHERE serial_number = 'jct20591';
debug('No of rows in fa_additions_b updated :'||sql%rowcount);
UPDATE fa_mass_additions
SET serial_number = 'JCT20591'
WHERE serial_number = 'jct20591';
debug('No of rows in fa_mass_additions updated :'||sql%rowcount);
UPDATE rcv_serial_transactions
SET serial_num = 'JCT20591'
WHERE serial_num = 'jct20591';
debug('No of rows in rcv_serial_transactions updated :'||sql%rowcount);
UPDATE mtl_serial_numbers
SET serial_number = 'JCT20591'
WHERE serial_number = 'jct20591';
debug('No of rows in mtl_serial_numbers updated :'||sql%rowcount);
UPDATE mtl_unit_transactions
SET serial_number = 'JCT20591'
WHERE serial_number = 'jct20591';
debug('No of rows in mtl_unit_transactions updated :'||sql%rowcount);
UPDATE csi_item_instances_h
SET new_serial_number = 'JCT20591'
WHERE new_serial_number = 'jct20591';
debug('No of rows in csi_item_instances_h updated :'||sql%rowcount);
UPDATE csi_t_txn_line_details
SET serial_number = 'JCT20591'
WHERE serial_number = 'jct20591';
debug('No of rows in csi_t_txn_line_details updated :'||sql%rowcount);
UPDATE csi_item_instances
SET serial_number = 'JCT20591'
WHERE serial_number = 'jct20591';
debug('No of rows in csi_item_instances updated :'||sql%rowcount);
COMMIT;
EXCEPTION
WHEN OTHERS
THEN
l_return_err :='Updating in one of the script has this error:'|| substrb(sqlerrm, 1, 55);
debug('Value of l_return_err='||l_return_err);
END;
Thanks
Nagamohan

Call forwarding to wrong number

I have call forwarding set to forward calls to my cell phone. In the past few days three or four calls have been transferred instead to my home phone, which is a big nuisance, because I'm in the US at the moment and, because of the time difference, they're often waking my husband in the middle of the night in Italy.
These callers don't even know my home phone number. They always call my US Skype number. A few months ago, I had temporarily set forwarding to my home phone, but changed it back to the cell phone. I checked the settings on my account, and it's definitely set to the cell phone number. When it first happened, I first checked the account, then I asked someone to try calling my Skype number. That time it transferred correctly to my cell phone. I didn't understand how it could have happened, but thought it woul never happen again. However it's happened again twice today. Now some people don't want to risk waking my husband, or attempting to converse with him in English, so they're just not calling me at all.
If anyone could solve this mystery, I'd greatly appreciate it, and so would my husband.

Lots of SKYPE tel. numbers were wrongfully forwarded to my company's land line 626-576-9900 in the past 30 days (4/20/2015 - 5/20/2015) or so. Please test (call your SKYPE tel# from other lines to see where it ends) and call SKYPE to correct it as soon as possilbe if you own any of these numbers! I suggest everyone who owns a SKYPE number do the test. You might have missed a lots of calls you supose to receive. These numbers are as following.
281-973-2121
281-973-6874
281-973-6695
304-932-0943
301-579-5097
317-395-7485
301-579-5316
281-973-6045
281-973-6090
203-903-0092
281-973-6833
281-713-6436
317-413-9306
203-208-6591
I've chat on-line with SKYPE customer/tech. support 2 times, got 2 case#s, 1288597626 (5/5/2015) and 1288963288 (5/8/2015), however I tested 2 of the above numbers just now (10:15 AM, 5/20/2015), both are still forwarded to my company's number 626-576-9900. One of SKYPE custmer service reps. did tell me that they (SKYPE) can do nothing about it because I am not the owner of any of these numbers. Please spread the above message to any one you know who has a SKYPE number.

How to call a Query from widget which has mandatory variables/filter values

Dear Gurus,
I want to show data from BI query (BEX) in Wedget, which has variable/ Filter as input parameter. Please tell me how add these parameters while calling query throgh web service.
Regards,
Aslam Khan

Hi Aslam,
Kindly refer to Page Number 49 u2013 23rd Point and Page 50 and 51 in the SAPEnterpriseWidgetDevelopmentGuide.pdf u2013 Which explains how to pass the Import / input Parameters.
You can also refer these links u2013 [How to pass more than one value in RfcRequest ?;
[how to bind an input field with an rfc input;
Hope it helpsu2026
Regards,
Shilpa B.V

Looping external swf which has no .fla

Hi!
What I have is a sliding menu with buttons - each button calls an external swf - which plays in an empty movie clip.
Now, I want the current loaded swf to loop till the time the user clicks on another button. The problem is, I do not have the fla files for any of the external swfs (these are screencam recordings using a software that does not publish .fla) - so I can't put a code at the end of each external swf asking it to not stop.
Any suggestions on how I might be able to have the external swf loop?
Thanks & Regards,
~ Raven

Thanks for your help Ned. Actually, I did manage to decompile the swf (using a 3rd party software) - yes, it is a movieclip on frame 1. I could even go inside it and place the loop code. But decompiling meant loss of the control bar that the screen capture software put in it and I can't compromise on that. I guess the screen capture guys should've chosen another softwares that publishes the .fla.
Thanks again and regards,
~ Raven

Call Forwarding with Skype Number

I have a skype number and a couple questions. I have searched the forums and did not see this question answered.
I have an unlocked iphone and travel througout a different country every month or so. Each new country means a new sim card and a new number.
My question is: Will purchasing the skype world subscription cover the costs of each country (as long as the country is covered in the plan)? It states that the subscription only covers mobiles in some countries and landlines in others. So if I purchase the unlimited world (and assuming I am in one of the countries covered) will this be all I need to receive unlimited forwarded calls to my mobile?
I hope this isnt too confusing. Thanks!

Hi, Salsy20 and Joeriba, and welcome to the Community,
Please check your call forwarding settings; Skype does not determine when to activate call forwarding based upon the number of rings; it is based upon an increment of time. For example, in the screen shot, below, the default increment is 10 seconds (circled in orange pen). You would need to determine and then experiment with how many rings = [x] seconds, or set to 0. Remember, if you make any changes to any settings, click Save!
Here is a link to the library of FAQ articles related to call forwarding:
https://support.skype.com/en/category/CALL_FORWARDING/
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Can i do a disk repair in my external hd which has my time machine?

my imac is crashing ,i have done a clean install of snow leopard & still it has crashed ,i did a disk repair of my hd & it was all good now can i do a disk repair on my external hd on which i have my time machine & music stored without erasing anything?
thanks

Yes, you can do the "repair disk" function of disk utility on the external drive and maintain it's data.
Regards,
Captfred

Call Forwarding with Online Number

Can I get skype online number and forward call to my phone in India?
As if someone calls skype online number his call can be answered at my India Mobile or Phone.
Is this possible?

I contacted Skype some months ago about this issue they said if you have a Subscription if it's covered under your subscription (for example calls to the US & Canada unlimited) and make a call on skype it will be covered.
I don't have the email or lost it somewhere as it's months old but basically that's what it says.

Unable to load external swf which has runtime sharing with another swf.

Hi,
I am getting issues on loading external swf say "importer.swf" file into another swf file say "loader.swf" for second time like
ReferenceError: Error #1065: Variable testSymbol is not defined. VerifyError: Error #1014: Class testClass could not be found.
at global$init()
In the external swf "importer.swf", i am trying to import the symbol "testSymbol" from another swf file say "exporter.swf", which exports through runtime sharing option for the symbols.
I am having some buttons in loader.swf file and on each button click i am loading different swf files into the loader.swf after unloading the previous one.
I am able to load and unload different swf files but unable to load the importer.swf file which is sharing symbols from external swf and that too for the second time i.e., when i click the button twice.
When trying to debug with flash debugger, all the other swf files are being unloaded before loading of another swf but the swf which is sharing symbols/classes with another swf is not getting unloaded.
Output when i am trying to load two files example and importer files into loader.swf file on two different button clicks. On first button click example.swf is loaded. On second button click , example.swf is unloaded and importer.swf is loaded which is successful. On first button click again importer.swf is unloaded and example.swf is loaded. On second button click again, example.swf is unloaded and importer.swf is loaded, here i am getting issues shown above.
Attemping to launch and connect to Player using URL D:\runtime issue\loader.swf
[SWF] D:\runtime issue\ loader.swf - 8181 bytes after decompression
[SWF] D:\runtime issue\example.swf - 441708 bytes after decompression
[UnloadSWF] D:\runtime issue\example.swf
[SWF] D:\runtime issue\importer.swf - 1920 bytes after decompression
[SWF] D:\runtime issue\importer.swf - 441708 bytes after decompression
[SWF] D:\runtime issue\ example.swf - 441708 bytes after decompression
[UnloadSWF] D:\runtime issue\ example.swf
[SWF] D:\runtime issue\importer.swf - 1920 bytes after decompression
ReferenceError: Error #1065: Variable xxxxxx is not defined.
Debug session terminated.
Code i am using
b1.addEventListener(MouseEvent.CLICK, b1Clicked);
b2.addEventListener(MouseEvent.CLICK, b2Clicked);
var ldr:Loader;
function b2Clicked(e:MouseEvent)
    if(ldr != null)
        ldr.unloadAndStop(true);
    ldr = new Loader();
    ldr.load(new URLRequest("importer.swf"));
    addChild(ldr);
function b1Clicked(e:MouseEvent)
    if(ldr != null)
        ldr.unloadAndStop(true);
    ldr = new Loader();
    ldr.load(new URLRequest("example.swf"));
    addChild(ldr);
If i try to open the swf using IE, i am not getting any issues at all. But i need to open this loader.swf in a air application. Also when i use loaderContext for the loader instance i am able to get rid of this issue but i cant use it in my application.
So, please help me in resolving this issue.
Thanks

I got my answer. I had to append the photo url to the 'movie' value of the javascript embed method. Like this:
<script language="JavaScript" type="text/javascript">
   AC_FL_RunContent(
      'codebase', 'http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=10,0,0,0',
      'width', '550',
      'height', '400',
      'src', 'lesson2',
      'quality', 'high',
      'pluginspage', 'http://www.adobe.com/go/getflashplayer',
      'align', 'middle',
      'play', 'true',
      'loop', 'true',
      'scale', 'showall',
      'wmode', 'window',
      'devicefont', 'false',
      'id', 'lesson2',
      'bgcolor', '#ffffff',
      'name', 'lesson2',
      'menu', 'true',
      'allowFullScreen', 'false',
      'allowScriptAccess','always',
      'movie', 'lesson2?photo=http://www.flash-mx.com/images/image1.jpg',
      'salign', ''
      ); //end AC code
</script>
Thanks,
srb.

How many times can you forward an e-mail which has been forwarded to you?

Many times, I receive an e-mail forwarded by a friend whose other friend forwarded him the same e-mail. Soon, the forwarded e-mail is very long since it has been forwarded so many times. Is there a limit to how many times an e-mail can be forwarded? Also,what can I do so that the only address I see is that of my friend instead of the address of anyone and everyone who either received or forwarded the original message? Thank you.

First, there is no limit. Second, avoid the problem by having everyone you know remove your name from their lists. Third, direct all such forwarded mail into the trash directly by creating a Mail rule. Ask all your "friends" to configure their email program to not include the text of the forwarded email in the body of the forwarded message (and if they send all this stuff to you from an email list, are you really their friend?)
If you cannot resist, then simply remove all the repetitive included forwards from the message before you send it to some other poor soul.

8330 Call Forwarding...How do I set the number of rings before calls are forwarded?

8330 Call Forwarding...How do I set the number of rings before calls are forwarded? Right now it instantly forwards my calls but I don't want that. I want to change it so that let's say that if after 5 rings I don't answer the call is forwarded. I've looked everywhere for an answer but have had no luck. Any help would be appreciated. I am with Virgin Mobile if this makes a difference.
Thank you
Message Edited by 8WDDdotcom on 08-01-2009 02:39 PM
Message Edited by 8WDDdotcom on 08-01-2009 02:44 PM

Well, call forwarding is a feature provided by your carrier -- it is not a function of the device. However it works for your carrier is how it works. Actually, from what I understand about call forwarding, it normally is an all-or-nothing circumstance...calls forward to the number you've asked them to be forwarded to, keeping you in a DND status. Regardless, though, if your carrier tells you how it works on their system, there's nothing that the device can do to override that. Unless there is some kind of 3rd party app that would do it, bypassing (somehow) the carrier network CF feature...but I've never heard of such a thing.
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Automatic call forwarding (time based) to mobile number in CUCM 9.1.1

Hi
I need to configure time based automatic call forwarding to mobile number. Can we do this from CUCM 9.1.1 ?
Example : Ex 2000 need to forward to 01111188888 in every friday after 9.00pm
Regds
$

There is one way you can still achieve it by using the Mobile connect (SNR).
In the Remote Destination you have the option to ring your mobile based on your requirement.
Please see the attached screenshot for the same.
So user need to enable the Mobile connect on friday all calls will go to the Mobile phone # (Remote destination).
Also delay before ringing should be 0 ms.
Please refer to the Mobile connect configuration guide for the same.
Kind Regards,
Raaj.

Clone internal disk(ufsdump) which has metadevice on external disk(sol 5.6)

Dear IT Experts,
I just help my friend. we planned to clone an internal disk of SUN Ultra 1 which is run using Solaris 2.6 (old).
Actually, this system has one external disk which has created before using metadevice.
The external disk (*/dev/md/dsk/d100 --> concatenation*) is used to save application data and connected to ultra 1 using SCSI device.
Here is the vfstab content:
+#device     device     mount     FS     fsck     mount     mount+
+#to mount     to fsck     point     type     pass     at boot     options+
+#+
+#/dev/dsk/c1d0s2 /dev/rdsk/c1d0s2 /usr     ufs     1     yes     -+
fd     -     /dev/fd     fd     -     no     -
+/proc     -     /proc     proc     -     no     -+
swap     -     /tmp     tmpfs     -     yes     -
+/dev/dsk/c0t0d0s1     -     -     swap     -     no     -+
+/dev/dsk/c0t0d0s0     /dev/rdsk/c0t0d0s0     /     ufs     1     no     -+
+/dev/dsk/c0t0d0s6     /dev/rdsk/c0t0d0s6     /usr     ufs     1     no     -+
+/dev/dsk/c0t0d0s4     /dev/rdsk/c0t0d0s4     /var     ufs     1     no     -+
+/dev/dsk/c0t0d0s7     /dev/rdsk/c0t0d0s7     /export/home     ufs     2     yes     -+
+/dev/dsk/c0t0d0s5     /dev/rdsk/c0t0d0s5     /opt     ufs     2     yes     -+
+/dev/md/dsk/d100     /dev/md/rdsk/d100     /export/home/oak     ufs     2     yes     +-
Running command "metastat" and "metadb -i" will give output :
+# metastat+
d100: Concat/Stripe    Size: 53031888 blocks    Stripe 0: (interlace: 64 blocks)        Device              Start Block Dbase        c0t2d0s7                   0     No        c0t3d0s7                   0     No        c0t4d0s7                   0     No
+#+
+# metadb -i+
flags           first blk       block count
a m pc luo        16              1034            /dev/dsk/c0t0d0s3
a    pc luo        1050            1034            /dev/dsk/c0t0d0s3
a    pc luo        2084            1034            /dev/dsk/c0t0d0s3
Running command "format" will give output :
Current partition table (original):
Total disk cylinders available: 2733 2 (reserved cylinders)+
Part      Tag    Flag     Cylinders        Size            Blocks
+0 root wm 0 - 134 100.20MB (135/0/0) 205200+
+1 swap wu 135 - 307 128.40MB (173/0/0) 262960+
+2 backup wm 0 - 2732 1.98GB (2733/0/0) 4154160+
+3 unassigned wm 308 - 310 2.23MB (3/0/0) 4560+
+4 var wm 311 - 580 200.39MB (270/0/0) 410400+
+5 unassigned wm 581 - 985 300.59MB (405/0/0) 615600+
+6 usr wm 986 - 2333 1000.47MB (1348/0/0) 2048960+
+7 home wm 2334 - 2732 296.13MB (399/0/0) 606480+
We try to clone disk using "ufsdump" command. The backup disk (cot1d0) capacity is like the capacity of original disk (c0t0d0) --> 2.1GB.
Here is all the command that we have run:
+# mount /dev/dsk/c0t1d0s0 /clone-root+
+# cd /clone-root+
+# ufsdump 0cf - /dev/rdsk/c0t0d0s0|ufsrestore -rf -+
+# mount /dev/dsk/c0t1d0s3 /clone-s3+
+# cd ../clone-s3+
+# ufsdump 0cf - /dev/rdsk/c0t0d0s3|ufsrestore -rf - --> this command gave output "it is not ufsdump format"+
# mount /dev/dsk/c0t1d0s4 /clone-var
# cd ../clone-var
# ufsdump 0cf - /dev/rdsk/c0t0d0s4|ufsrestore -rf -
+# mount /dev/dsk/c0t1d0s5 /clone-opt+
+# cd ../clone-opt+
+# ufsdump 0cf - /dev/rdsk/c0t0d0s5|ufsrestore -rf -+
+# mount /dev/dsk/c0t1d0s6 /clone-usr+
+# cd ../clone-usr+
+# ufsdump 0cf - /dev/rdsk/c0t0d0s6|ufsrestore -rf -+
+# mount /dev/dsk/c0t1d0s7 /clone-export+
+# cd ../clone-export+
+# ufsdump 0cf - /dev/rdsk/c0t0d0s7|ufsrestore -rf+ -
All dumping process were successfully done EXCEPT at /dev/rdsk/c0t0d0s3. It said that this partition is not in ufsdump format. I think because this partition is used as metadevice database.
All dumping process were successfully done EXCEPT at /dev/rdsk/c0t0d0s3. It said that this partition is not in ufsdump format. I think because this partition is used as metadevice database.
Afte install bootblk to c0t1d0s0, we tried to boot system using clone disk result (c0t1d0). We unplugged the original disk, and put the clone disk into target 0 slot (c0t0d0).
While booting, it said that the meta database was broken and need to be repaired. we delete the metadb and re-create again --> # metadb -a -c3 -f /dev/dsk/c0t0d0s3.
then REBOOT.
But, after it, system won`t boot. the said that
*"/dev/md/rdsk/d100" = no such device or address*
*/dev/md/rdsk/d100 /dev/dsk/c0t0d0s5 /dev/dsk/c0t0d0s7 = can`t check file system*
please run fsck manually"
we have run command "fsck". but the problem still there. System can`t boot. :-(
But, while we put the original disk back, the system can run normally.
Is there any steps that we are missing? Kindly need your help, please....we stuck. No idea...please response
Thank you for any help and suggestion
regarads,
ferianto

Sorry to hear.
Other possibilities...
Data Rescue...
http://www.prosofteng.com/products/data_rescue.php
(Has a Free Demo to see if it could or not, but you'll need another drive to recover to).
rccharles on file recovery...
"Stellar Phoenix Macintosh - Mac data recovery software, recovers data from damaged, deleted, or corrupted volumes and even from initialized disks."
They have a trial version, so I guess you can see if your data can be recovered...
http://www.stellarinfo.com/mac-data-recovery.htm
FileSalvage is an extremely powerful Macintosh application for exploring and recovering deleted files from a drive or volume. FileSalvage is designed to restore files that have:
    * been accidentally deleted.
    * become unreadable due to media faults.
    * been stored on a drive before it was re-initialized/formatted.
http://subrosasoft.com/OSXSoftware/index.php?main_page=product_info&products_id= 1

Call forward to external number which has auto attendant

Similar Messages

Maybe you are looking for