CALL FUNCTION 'RFC_REMOTE_PIPE' throwing exception as 1

Hi Sapients,
I am using CALL FUNCTION 'RFC_REMOTE_PIPE' to rename a file at the UNIX level..Though this runs well... sometimes this is giving an exception as ''1'' (System Failure).. if we execute the same after 3 or 4 hours this RFC is again successfully executed...Can anyone throw some light on why this is happening and how we can avoid the same.
    CALL FUNCTION 'RFC_REMOTE_PIPE'
    DESTINATION 'SERVER_EXEC'
    EXPORTING
      COMMAND = l_command
      READ    = c_yes
    EXCEPTIONS
      system_failure        = 1
      communication_failure = 2
      OTHERS                = 3.
where the l_command is mv old_file_name New_file_name
and C_yes is X

Hi,
Maybe my answer comes too late.
Could be helpful for others anyway.
We got the same trouble and it was due to the RFCEXEC.SEC file.
Installing the SDK7.20 the RFCEXEC files were missing and old RFCEXEC.SEC was not in the same format...
Please look also to OSS notes #1592501 and #1581595
Thanks
//Philippe.

Similar Messages

CALL FUNCTION 'RFC_REMOTE_PIPE' throwin exception ''1''

Hi Sapients,
I am using CALL FUNCTION 'RFC_REMOTE_PIPE' to rename a file at the UNIX level..Though this runs well... sometimes this is giving an exception as ''1'' (System Failure).. if we execute the same after 3 or 4 hours this RFC is again successfully executed...Can anyone throw some light on why this is happening and how we can avoid the same.
    CALL FUNCTION 'RFC_REMOTE_PIPE'
    DESTINATION 'SERVER_EXEC'
    EXPORTING
      COMMAND = l_command
      READ    = c_yes
    EXCEPTIONS
      system_failure        = 1
      communication_failure = 2
      OTHERS                = 3.
where the l_command is mv old_file_name New_file_name
and C_yes is X
<promise removed by moderator>
Edited by: Thomas Zloch on Mar 16, 2011 1:00 PM

Hi,
Maybe my answer comes too late.
Could be helpful for others anyway.
We got the same trouble and it was due to the RFCEXEC.SEC file.
Installing the SDK7.20 the RFCEXEC files were missing and old RFCEXEC.SEC was not in the same format...
Please look also to OSS notes #1592501 and #1581595
Thanks
//Philippe.

Call function destination XI exception

Hello,
in R3 i call to function in XI, it's follow:
call function 'XXX'
--destination 'XI'
--exporting
AA = aa
--importing
BB = bb
--exceptions
system_failure = 1
communication_failure = 2
other = 3
when this call produce a exception, why sometimes I can not see anything in XI - SXMB_MONI / runtime workbench -?
thank you very much

HI,
If in case the message failed at entry point i.e. RFC sender communication channel, then it would not be available in SXMB_MONI.
You may trace it from Communciation Channel Monitoring from RWB..
Thanks
Swarup

Any way to call function from impdp except remap_data?

HI Friends,
I have a requirement of load prd data into stage by masking some sensitive columns.Iam using impdp of datapump utility to load data.iam using remap_data option to call mask functions.But remap_data option is supporting upto 10 columns.
we have more than 20 columns to mask.
is there any other way to call oracle function from impdp?
eg:-
impdp pa_data_sub/******@qdssih30 NETWORK_LINK=qdspih30 schemas=RESP remap_data=col1.mask,col2.mask,col3.mask... CONTENT=all table_exists_action=replace
Please suggest me different options.
Thanks,
Venkat Vadlamudi

No,
I didn't realize that there was a limit of 10 for remap data. As a work-around, can you remap 10 of the columns during export, and then 10 during import? Not sure if you want to give someone a dumpfile with sensitive data in it. If you could, you could at least double the limitation to 20 rows.
Dean

One-way soap call do not throw exception

Hello,
I prepared a client for web service with JWSDP-2.0. wscompile generated proxy classes. The web service uses "basic authentication". Now comes my problem. wscompile generated stub which calls
_sendOneWay((java.lang.String) _getProperty(ENDPOINT_ADDRESS_PROPERTY), _state);Because the web service is defined as: void ENCRYPTED_MESSAGE(SOAPElement)
When basic authentication fails (I get HTTP 401 code - which I can see in debug created by JVM parameter -Djavax.net.debug=all ) then NO EXCEPTION is fired!!!
When I change the wsdl and add dummy output parameter, then send((java.lang.String) getProperty(EN... is generated and authentication fires exception. But this is not the right way to do it.
My question is - can I make wscompile to generate Stub without _sendOneWay?
Thanks for yout time and attention!
Honza

I forgot to say that I am using JDeveloper 9.0.5.2 and that I have built an ADF application with Struts + ADF Business Components (bc4j)
Thanks

Error while transforming XSLT by calling function with Reflection API

Hi,
I'm new to Reflection API. I want to call function from the jar file which is not in my application context. So I have loaded that jar ( say XXX.jar) file at runtime with URLClassLoader and call the function say [ *myTransform(Document document)* ]. Problem is that when I want to transform any XSLT file in that function it throws exception 'Could not compile stylesheet'. All required classes are in XXX.jar.
If I call 'myTransform' function directly without reflection API then it transformation successfully completed.
Following is code of reflection to invoke function
        ClassLoader contextCL = Thread.currentThread().getContextClassLoader();
        URLClassLoader loader = new URLClassLoader(jarURLs, contextCL);
        Class c = loader.loadClass(fullClasspath);
        Constructor constructor = c.getDeclaredConstructor(constructorParamsClasses);
        Object instance = constructor.newInstance(constructorParams);
        Method method = c.getDeclaredMethod("myTransform", methodParamsClasses);
        Object object = method.invoke(instance, methodParams);Following is function to be called with reflection API.
public Document myTransform ( Document document ) {
// Reference of Document (DOM NODE) used to hold the result of transformation.
            Document doc = null ;
            // DocumentBuilderFactory instance which is used to initialize DocumentBuilder to create newDocumentBuilder.
            DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance () ;
            // Reference of DocumentBuilder used to create new Document (DOM NODE).
            DocumentBuilder builder;
            try {
                  // Initialize DocumentBuilder by using DocumentBuilderFactory instance.
                  builder = factory.newDocumentBuilder ();
                  // Initialize new document instance by using DocumentBuilder instance.
                  doc = builder.newDocument () ;
                  // Creates new DOMSource by using document (DOM NODE) which is coming through current transform() method parameter.
                  DOMSource domsource = new DOMSource ( document ) ;
                  // Creates new instance of TransformerFactory.
                  TransformerFactory transformerfactory = TransformerFactory.newInstance () ;
                  // Creates new Transformer instance by using TransformerFactory which holds XSLT file.
                  Transformer transformer = null;
********* exception is thrown from here onward ******************
                  transformer = transformerfactory.newTransformer (new StreamSource (xsltFile));
                  // Transform XSLT on document (DOM NODE) and store result in doc (DOM NODE).
                  transformer.transform ( domsource , new DOMResult ( doc ) ) ;
            } catch (ParserConfigurationException ex) {
                  ex.printStackTrace();
            } catch (TransformerConfigurationException ex) {
                  ex.printStackTrace();
            } catch (TransformerException ex) {
                 ex.printStackTrace();
            } catch (Exception ex) {
                 ex.printStackTrace();
            //holds result of transformation.
            return doc ;
}Following is full exception stacktrace
ERROR: 'The first argument to the non-static Java function 'myBeanMethod' is not a valid object reference.'
FATAL ERROR: 'Could not compile stylesheet'
javax.xml.transform.TransformerConfigurationException: Could not compile stylesheet
        at com.sun.org.apache.xalan.internal.xsltc.trax.TransformerFactoryImpl.newTemplates(TransformerFactoryImpl.java:829)
        at com.sun.org.apache.xalan.internal.xsltc.trax.TransformerFactoryImpl.newTransformer(TransformerFactoryImpl.java:623)
        at com.actl.dxchange.utilities.Transformation.transform(Transformation.java:83)
        at com.actl.dxchange.base.BaseConnector.transform(BaseConnector.java:330)
        at com.actl.dxchange.connectors.KuoniConnector.doRequestProcess(KuoniConnector.java:388)
        at com.actl.dxchange.connectors.KuoniConnector.hotelAvail(KuoniConnector.java:241)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:585)
        ...........

Hi,
Thanks for response.
Following is code for setting 'methodParamsClasses' array object. I do ensure that Document is not null and valid. My application is web application.
Document requestObj = /* my code for generating Document object*/
Object[] methodParams = new Object[]{requestObj}
Class[] methodParamsClasses = new Class[]{};
            if (methodParams != null) {
                methodParamsClasses = new Class[methodParams.length];
                for (int i = 0; i < methodParams.length; i++) {
                    if (methodParams[i] instanceof Document) {
/************** if parameter is instance of Document then I set class type as "Document.class" ***********/
                        methodParamsClasses[i] = Document.class;
                    } else {
                        methodParamsClasses[i] = methodParams.getClass();

Call function..Destination

Hi Experts,
My requirement is to call a RFC Java function in SAP. The Java function is an encryption function which has 4 parameters (Password, Message, Strength128, Strength256). I need to pass the data for the parameters from SAP to JAVA. With the help of SDN, I tried to call this function in ABAP. A destination named 'INTEGRATION' is created in SM59, with the registered Program ID 'ASEncryptionHelper'. ASEncryptionHelper is the Java function name and the program ID is registered with this name only. The following is the code I wrote in my report
DATA: XPASS TYPE STRING.
XPASS = 'PASS'.
CALL FUNCTION 'ASENCRYPTIONHELPER' DESTINATION 'INTEGRATION'
EXPORTING
    PASSWORD          = XPASS
    MESSAGE             = XML_RESULT
    STRENGTH128       = ' '
    STRENGTH256       = 'X'
I have created a RFC function module in my SAP system with the name ASENCRYPTIONHELPER
FUNCTION ASENCRYPTIONHELPER.
""Local Interface:
*" IMPORTING
*"     VALUE(PASSWORD) TYPE STRING
*"     VALUE(MESSAGE) TYPE STRING
*"     VALUE(STRENGTH128) TYPE BOOLEAN
*"     VALUE(STRENGTH256) TYPE BOOLEAN
ENDFUNCTION.
When I execute the program I get a runtime error "Bean ASENCRYPTIONHELPER not found on host HOSTNAME".
I am not able tofigure out the exact problem.
Also I wanted to know whether the way I am coding is right. Do I need to create a RFC function module in SAP also as I did above?
Does the Uppercase of the function 'ASENCRYPTIONHELPER' matter? In SM59 the program id is mentioned as 'ASEncryptionHelper'.
I tried to change the function name with 'ASEncryptionHelper' in the CALL FUNCTION, but then I get another error, "JCO.Server could not find server function 'ASEncryptionHelper' '. What is wrong? I am confused.
Please guide.
Thanks
Anu.

Hi,
I didn't get your requirement wxatly but you can do as below,
What I am assuming is you have a java batch file at your desktop and you want to encrypt the file through this batch file execution from SAP.
Now to execute the batch file at runtime and to pass data at runtime you can use below function module
W_RFCENCRY = 'C:\Encrypt\enc.exc C:\Encrypt\test.txt'.
W_RFCDEST = 'ZRFC'.
CALL FUNCTION 'RFC_REMOTE_PIPE'
      DESTINATION W_RFCDEST
      EXPORTING
        COMMAND               = W_RFCENCRY
      EXCEPTIONS
        COMMUNICATION_FAILURE = 1
        SYSTEM_FAILURE        = 2
        OTHERS                = 4.
Here ZRFC is the RFC created in SM59 as below
1) select TCP/IP and create ZRFC
in program option type as below C:\RfcSdk\bin\rfcexec.exe
Note: RFCDSK folder is required to execute the batch file at your workstation at path specified as above
2) In activation type select start on front end work station radio button.
Now save the RFC and check the connection, same will be there if RFC SDK folder is available as specified in the program option
In W_RFCENCRY give the inputs that you want to pass with the batch file.
here I have mentioned as 'C:\Encrypt\enc.exc C:\Encrypt\test.txt'. in the program where C:\Encrypt\enc.exc is the path for batch file and C:\Encrypt\test.txt is the path of the file on the work station which is to be encrypted.
Hope this will help you, I think at your end batch file can be different and inputs to be passed in the batch file can also be different.

How does it work : String MethdName (argument) throws Exception {}

HI,
I am very new to Java. I was looking through some code written by some other developer.
the code looks like
String MethdName (argument) throws Exception {
// some code here
What it exactly means? Are we forcing this method to always throw an exception? or only if some exception occurs then it will throw the exception?
Regards,
Lucky

It doesnt throw exceptions always.
What this means is that if you code inside the method does use some API or function that throws exceptions when a particular condition is not met, you method would throw the same exception to it's caller. If you didn't add the throw exception clause in your method, you would have to try/catch the exception that would be thrown in your code.
Or else, your code won't compile.
Summary:
A method that throws an uncaught, checked exception must include a throws clause in its declaration.
Read this for some additional info:
[Java Exception Handling|http://ajaxweb.wikidot.com/java-exception-handling]
[Sun Java Tutorial - Exceptions|http://java.sun.com/docs/books/tutorial/essential/exceptions/index.html]

Function module JOB_CLOSE throwing exception

Hello,
We have a batch job which has 2 steps:
1) Step 1 uses job_open, job_submit and job_close and immediately schedules batch job A/P_ACCOUNTS which in turn creates batch input sessions A/P_ACCOUNTS.
2) Step 2 Processes A/P_ACCOUNTS sessions created yesterday or today.
In few cases, job_close is throwing exception job_close_failed. I believe that error is coming due to non availability of work processes. Job A/P_Accounts is defined as a class C batch job. There is a check in the FM job_close which does the following check:
- if the class of a batch job is B or C, it calculates the number of free work processes. If there are no work processes available then JOB_CLOSE throws JOB_CLOSE_FAILED exception.
- If the class is u2018Au2019, it skips this check.
We have an option of changing the class of batch job to A but there are some system critical jobs that are running as class A.
My question is:
In the code, JOB_CLOSE has been called for scheduling the job A/P_ACCOUNTS with parameter start immediately. Can anyone please let me know what will happen if function JOB_CLOSE is not called with start immediately option? Will the batch job A/P_ACCOUNTS wait till the time work processes are available?
Or, can anything else be done to solve the issue?
Regards,
Siddharth

HI,
This is my experience with job_close..
when i was working in zprograms then i was able to scedule it any time i wanted..
but in my standard program when i tried it didn't worked....
so i have to use that option of starting it immediately..
and then it is working fine..
now if i schedule 5 jobs... one after another..
its get queued up...and once the processor is free...its working..
my code of job close
CALL FUNCTION 'JOB_CLOSE'
    EXPORTING
      jobcount             = job_count
      jobname              = job_name
      strtimmed            = yes " yes = 'X'
    IMPORTING
      job_was_released     = job_released
    EXCEPTIONS
      cant_start_immediate = 1
      invalid_startdate    = 2
      jobname_missing      = 3
      job_close_failed     = 4
      job_nosteps          = 5
      job_notex            = 6
      lock_failed          = 7
      invalid_target       = 8
      OTHERS               = 9.
regards,
Yadesh

Uncatchable exception: BSP calling Function Module

Hi all,
currently i'm facing a very weird problem. My application class calls function module
HR_INFOTYPE_OPERATION. Normally, in case of an error, the function module gives you back a return parameter. But if i call it from my BSP, the processing doesn't leave the function module. It directly throws an exception ERROR_MESSAGE_STATE instead of writing the message into parameter return.
If i call the function module with the same parameters from a report, it works fine and the error message is written to return parameter without throwing an exception.
What am i doing wrong? I don't want that exception and need to go on with filled parameter result.
Regards
Mark-André

Hi MA,
try using ERROR_MESSAGE in the exceptions list, like this.
CALL FUNCTION 'func_name'
     EXPORTING
          string            = text
          pos               = position
     IMPORTING
          string1           = text1
          string2           = text2
     EXCEPTIONS
          string1_too_small = 1
          string2_too_small = 2
          ERROR_MESSAGE     = 3
          OTHERS            = 4.
Cheers
Graham Robbo

PDFLPrintDoc function throw exception on Mac in PDF Lib 10

Hi,
Currently I'm doing the work of upgrading a xcode project on Mac from PDF lib from 8.1 to 10.
After change to use PDF lib 10 framework, and build project, I found it throw an exception when calling function PDFLPrintDoc to print PS type, error message saying An internal error occured.
However, on Win platform, it is ok.
I read from release note that since PDF lib 9,
PDFLPrintDoc() honors only default values for tilingMode (kPDNoTiling)
In the previous code, the flattenInfo variable in PDPrintParams is a null porinter, so I manuall add code to set PDFlattenTilingMode to be kPDNoTiling.
But the problem is, now when running ,it still throw exception saying "An internal error occured" , nothing changed.
Has anybody here encountered such problem?
Please give me an answer, thanks~

Since this is PDFL, you have a license from either Adobe or Datalogics. Please contact their support directly.

Need of exception handler in calling function, isn't that weird???

Hi,
I have written a function as follows
public String fetchName(String query) throws Exception
          stmt = con.createStatement();
          ResultSet rs = stmt.executeQuery(query);
          rs.next();
          return (rs.getString(1));
I've handled the for exceptions here using "throws Exception". Inspite of that when i call it from other function and in that funtion no exception need to be handled, compiler gives errror.
Following is the calling funtion
public String checksubAction(String action)
          String retValue=" ";
String query="";
          query = "select Title from dbo.Folder where Folder_Id="+folderId;
          retValue = dataBaseObj.fetchName(query);
but when i write it in try-catch block, no errror is given.
Why is it that inspite of handling exception(s) in the called function, we need to handle them in calling functions.

No you have not handled the exception. Your code say "fetchName" does NOT handle exceptions of type "Exception", the calling method should be aware of this, and handle that type of exception.
The Java Tutorial: Essential Java Classes: Handling Errors Using Exceptions
(Please when declaring a method can throw exceptions, be specific, i.e. throw SQLException in this case)

Why there's error stating "unreported exception" when call function

     public void actionPerformed(ActionEvent evt)
          Object obj = evt.getSource();
          if (obj == DeleteButton)
               readfile(); // Error here
               deletefile();
               rename();
========================================================================
     public void readfile() throws Exception
          BufferedReader in = new BufferedReader(new FileReader("WhiteCollar2.txt"));
          line=in.readLine();
          found=0;
          while (line!=null)
               if ((line.substring(0,6)).equals((String)textfield.getText()))
                    System.out.println("CORRECT\n");
                    found=1;
               else
                    writefile();
               line=in.readLine();
========================================================================
How come when I call the above readfile(), it gives me :
DeleteScreen.java:70: unreported exception java.lang.Exception; must be caught or declared to be thrown
readfile();
However if I change to the following :
try{readfile()};
catch (Exception e) {}
The code works fine. I am still figuring out on throwing exceptions etc. But how come I already throw exceptions it still complains exception not declared?
Thanks and Rgds

but the writefile() function which I called in the
read() also throw exception but how come I do not need
to catch it for the write()?The error message says it all: must be caught or declared to be thrown. Thus, you must either catch the exception using try-catch or you must declare that your method throws the exception using the throws declaration.
Your call to writefile() is in the method readfile() that already declares that it throws Exception. So there is no problem there.
BTW, you should know that it is generally ill-advised to catch or declare exception using the superclass Exception. You should use as specific an exception class as possible. In this case I suppose it would be IOException.

Custom XSLT Functions Throw Exception

Hi,
I have following requirement-
1. I have defined and configured some custom XSLT functions in Jdev and BPEL, which throw exception in case of an error.
2. Now I want to catch that exception in my BPEL process
3. In My BPEL process I have defined transformation step ( which is using those Custom XSLT functions) in a scope and added a catch branch to that
4. But even XSLT java function throw an exception , it is not being catch by catch branch.
Could you please help me regarding this and tell me any other way to catch an exception in BPEL process thrown by Custom XSLT function within transformation step?
Thanks.

Hi,
Its the problem with the date. In the configuration file i used dateTime for java.util.Date, because of this i cant see "User Defined" option in Jdeveloper component pallete. I checked at XML data types i had seen dateTime for java.util.Date Class, but its not working.
Do anyone created a custom xslt function which has date as parameter or return type?, If so wht they had used as data type for xml and java.
Thanks,
RR

EJB is not throwing exception to calling Action class in Unix environment

Hi
We are using Weblogic Server 9.2.3.0.
One of our EJB is not throwing exception to calling Action class in Unix environment. Its working fine in Windows.
Somehow the EJB is swallowing the exception.
any idea? I suspect it may be environmental issue?
thank you

Hi
We are using Weblogic Server 9.2.3.0.
One of our EJB is not throwing exception to calling Action class in Unix environment. Its working fine in Windows.
Somehow the EJB is swallowing the exception.
any idea? I suspect it may be environmental issue?
thank you

CALL FUNCTION 'RFC_REMOTE_PIPE' throwing exception as 1

Similar Messages

Maybe you are looking for