Call Intercept Suggestion - Screen "International" as Well

I've recently started using Call Intercept, and I really like the service. I'm not sure where to submit suggestions, so I'll put this here. I think Call Intercept should also screen calls that say "International" on the caller ID, or allow the entry of more than 10 digits for the blocked list. I've noticed that some persistent annoying calls are somehow coming through as "International" to avoid being blocked.

Hi ForumsRMe
Welcome to the forum! The best place to post ideas for new services or products is on the Verizon Idea Exchange. Why not copy this message over there where it will get more attention from other users, and possibly start a good discussion?

Similar Messages

Call forwarding to an International Number

I am working overseas and have a prepaid phone with a local number in that country. Prior to leaving the US again, can I enter the international number of my prepaid phone into the call forwarding feature on my iPhone and have my calls forwarded to that phone? I assume that the person calling my iPhone will not be charged, but will I be charged for making an international phone call each time a call is forwarded to my international phone number? Are there any other charges involved? Has anyone done this before that can tell me how well it works?

To make sure you should contact AT&T but if you set up call forwarding to an international number, you will be the one charged for the international call since your account/phone is dialing the final number.
Again, find out for sure from AT&T who gets the charge.

Passing paramters and calling a PCUI screen from a BSP Application

Hi,
We have developed a custom BSP application which displays a list of Opportunities in a HTMLB table view based on a search criteria.
When I click on a particular opportunity no., I should call a PCUI screen which should display that particular opportunity details.
Any help is greatly apperciated.
Thanks,
Vasu.

You are going to have to be more specific in what you want.
First I would read the following pieces of info. They will help you with general problems, also with creating an Iterator and read the select rows of a table.
BSP Element - Dynamic tableView with Internal Table
<a href="/people/brian.mckellar/blog/2003/10/31/bsp-programming-htmlb-tableview-iterator">BSP Programming: HTMLB TableView Iterator</a>
Just shooting from the hip I am assuming you are clicking on a selected ROW in the tableView where you defined the tableView with <i>selectionMode="SINGLESELECT"</i> and <i>onRowSelection="MySelectEvent"</i> then on the OnInputProcessing Event Handler you read the selected row (see <a href="TableView and selected row)
So and of course once you read the selected row in the OnInputProcessing event handler you can do further porocessing.
However if you are wanting to provide the user with the ability to click an icon or text link in the row then please refer to the Iterator for that.

How to call a new screen in Infotype enhancement

<<Subject change from ALL CAPITALS by moderator>>
Hello everyone,
i just want to ask: i am doing an infotype enhancement and this object is really new to me, i wanted to ask how am i going to call a new screen. thats all.
here currently is my code:
module MODULE_PAI_0494 input.
IF sy-ucomm = <FctCode>.
    CALL SCREEN <Custom Sceen>.
ENDIF.
endmodule.
any tip and/or trick is highly appreciated.
thanks.
Mark
Edited by: Matt on Nov 13, 2008 7:53 AM

Hello Chandra,
Yup, i have coded under the ZPnnnn00, and yes, Screen 200 is also available.
here is the code that i have developed so far.(this is only for the pop up screen part)
Mod. Pool        ZP049400                       Active
INCLUDE zp049410.
INCLUDE mppdat00.
INCLUDE fp50ppsb.
INCLUDE mppers00.
INCLUDE zp049420.
INCLUDE zp049430.
INCLUDE zp049440.
*&      Module USER_COMMAND INPUT
      text
MODULE user_command INPUT.
IF sy-ucomm = 'RNE'.
    CALL SCREEN '201' STARTING AT 1 1
                         ENDING AT 50 5.
*&      Module USER_COMMAND_0201 INPUT
      text
module USER_COMMAND_0201 input.
if ZROUTE_BTN = 'X'.
ZNEWEVAL = gt_p0490-ZZCURREVAL.
endif.
endmodule.                 " USER_COMMAND_0201 INPUT
i was advised to create a similar functionality that FM: 'TRM_POPUP_TEXT_INPUT' is producing.
the pop up screen is similar to my requirement where i have to input a text.
i wanted to avoid that suggestion because recreating an FM is none of my capability yet.
if there really is a way to do it, that is not time consuming... i would go for it.
initially, what i have in mind is:
Since:
screen 200 is a subscreen of screen 2000,
that makes 201 NOT part or NON existing in MPnnnn00.
right? or i have it wrongly?
thanks again.
Mark

SCREEN INTERNAL TABLE ATTRIBUTES

Hi
In the screen internal table attributes i have seen four groups namely by group1 to 4.
My doubt is what is the concept behind this??
How to find out the screen group for a particular field??
it is already assigned or we have to assign it??
Thanks and Regards
Arun Joseph

Hi Arun,
(1) what is the concept behind this??
I will try to give a simple example for the same
Imagine a field called TEST1 and test2 for which in the screen we have 4 groups
Now the requirement is that
(1) when user enters transaction X1 he needs to see the field TEST1 and TEST2
(2) when user enters transaction X1 he needs to see the field TEST1 and dont want to see TEST2
so if tcode = X1
we need both TEST1 and TEST2
so in group1 (first of the 4 boxes we write G1 for both TEST1 and TEST2)
we write the code
loop at screen
if screen-group1 = 'G1'
screen-active = 1.
else screen-active = 0.
so if tcode = X1
we need to see TEST1 and hide TEST2
in the second box of the group we write G2 only for TEST1
we write the code
loop at screen
if screen-group2 = 'G1'
screen-active = 1.
else screen-active = 0.
since TEST2 second box is empty the above code will execute the else part and hide field TEST2 but show TEST1
In short screen groups help us group a particular set of screen fields based on a particular requirement
in this case just 2 are mentioned , imagine a case with 10 fields,we can easily control thier screen properties through code by grouping them
(2) How to find out the screen group for a particular field??
Check the screen properties of the field in the screen painter and see which all groups are filled
In the screen painter just see the boxes which are filled for "Group"
if the first box is filled then in the ABAP code
check by writing if screen-group1 = 'XX'
if the second box is filled then in the ABAP code
check by writing if screen-group2 = 'XX'
the third box is filled then in the ABAP code
check by writing if screen-group3 = 'XX'
the fourth box is filled then in the ABAP code
check by writing if screen-group4 = 'XX'
this replaces the check if screen-name = a field and checks which all fields fall under a group and does action on all the fields based on the code written
(3)it is already assigned or we have to assign it??
If it is a stndard program then it comes predefined if the group property of the screen is used to control it..to change it an access key maybe required provided there are no user exits for the same
in a custom program we can fill the group properties of a screen element
Pls revert if you need more clarifications
Reward if helpful
Regards
Byju

How to call a sub screen from abap report

Hellow friends,
how to call sub screen 1001 prog name SAPLMGD1
and main program SAPLMGMM screen 4000 of tcode MM02.
i need to call the sub screen from abap report

Hi Rajesh,
You can use FM MATERIAL_MAINTAIN_DIALOGUE to go to subcreen MRP1 in MM02.
Please check this sample code from other thread and enter 'MRP 1' for p_dytxt.
REPORT zsritest.
TABLES mara.
DATA: lv_bilds LIKE t133a-bilds,
ls_t130m LIKE t130m,
ls_rmmg1 LIKE rmmg1,
lwa_view TYPE mbildtab,
lwa_auswg TYPE mgauswg,
lt_views TYPE STANDARD TABLE OF mbildtab INITIAL SIZE 0,
lt_auswg TYPE STANDARD TABLE OF mgauswg INITIAL SIZE 0.
PARAMETERS: p_matnr LIKE mara-matnr,
p_werks LIKE marc-werks,
p_dytxt LIKE mbildtab-dytxt.
SELECT SINGLE * FROM mara WHERE matnr EQ p_matnr.
CHECK sy-subrc EQ 0.
CALL FUNCTION 'T130M_SINGLE_READ'
EXPORTING
tcode = 'MM02'
kzrfb = 'X'
IMPORTING
wt130m = ls_t130m
EXCEPTIONS
not_found = 1
wrong_call = 2
OTHERS = 3.
CALL FUNCTION 'BILDSEQUENZ_IDENTIFY'
EXPORTING
branche = mara-mbrsh
materialart = mara-mtart
tcode_ref = ls_t130m-trref
* KZRFB = ' '
IMPORTING
bildsequenz = lv_bilds
* KZ_BILDS_CHANGED =
EXCEPTIONS
wrong_call = 1
not_found = 2
OTHERS = 3.
CALL FUNCTION 'SELECTION_VIEWS_FIND'
EXPORTING
bildsequenz = lv_bilds
pflegestatus = mara-pstat
TABLES
bildtab = lt_views[]
EXCEPTIONS
call_wrong = 1
empty_selection = 2
OTHERS = 3.
ls_rmmg1-matnr = mara-matnr.
ls_rmmg1-werks = p_werks.
READ TABLE lt_views INTO lwa_view WITH KEY dytxt = p_dytxt.
CHECK sy-subrc EQ 0.
lwa_auswg-auswg = lwa_view-auswg.
APPEND lwa_auswg TO lt_auswg.
CALL FUNCTION 'MATERIAL_MAINTAIN_DIALOGUE'
EXPORTING
irmmg1 = ls_rmmg1
* IRMMG1_REF = ' '
KZ_EIN_DARK = 'X'
t_tcode = 'MM02'
* FLG_MATNR_RES = ' '
p_pstat = mara-pstat
* FLG_STAT_ALL = ' '
* CALL_MODE2 = ' '
* IMPORTING
* MATERIAL_NO =
* UPDATE_OK =
TABLES
iauswg = lt_auswg[]
EXCEPTIONS
no_authority = 1
OTHERS = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Regards,
Ferry Lianto

There is no option to reject an incoming call in locked screen, there must be an icon on the screen for one who don't want to use lock button several times, i did'nt face this problem in last ios 6.1.3.

There is no option to reject an incoming call in locked screen, there must be an icon on the screen for one who don't want to use lock button several times, i did'nt face this problem in last ios 6.1.3.

A good read. Have you done anything at all to resolve your problem. Reset? Restore?
By the way - "your products"... nobody here produced the iPhone, we are all just users. Apple is not here.

How can I pass Flex Field value to the Call Wrap Up screen?

Hello helpers,
I am trying to get a value from the 'Flex Field' passed over to the 'Call Wrap Up' screen by using Form Personalization.
Oracle was configured by a subcontractor and therefore I do not know what the exact name of the textfield is in the Flex Field however the label is 'Method of Contact'. When i set 'Show Custom Events' to 'On', I get the response: 'CSXXXRC.INCIDENT_TRACKING.STATUS_CODE:WHEN-NEW-ITEM-INSTANCE' When i enter a value in the Method of Contact field in the Flex Field.
Can anyone help?
I am a complete Newbie to Oracle.... I only know a bit about Oracle Form Personalization.
Any help would be much appreciated,
S

Seems like you're talking about a from from the eBusiness-suite. There are special rules for that, ask your question in the eBusiness-suite-forum OA Framework

Calling custom dialog screen from Standard Transaction(user Exit)

Hi, I'm calling Standard Transaction from a Custom Screen. I'm calling a custom screen again with in standard transaction (implemented custom screen thru user exits using macros). But when I click 'continue/cancel' in the custom screen, control is going back to main cutom screen rather go back to standard transaction. Could anyone please help me out how to come back to standard transaction from custom screen rather going back to main cutom screen.
***INCLUDE LZ_R_FORWARD_FORWARD_LOADI01 .
*&      Module USER_COMMAND_9000 INPUT
MODULE user_command_9000 INPUT.
CASE sy-ucomm.
    WHEN 'EXEC'.
      PERFORM validate_popup_data.
      IF flag_error_screen NE 'X'.
        MOVE-CORRESPONDING ZFFL_POPUP to var_ZFFL_POPUP.
        clear flag_return.
        SET SCREEN 0.
        LEAVE SCREEN.
      ENDIF.
    WHEN 'CANC'.
      flag_return = 'X'.
      SET SCREEN 0.
      LEAVE SCREEN.
    WHEN OTHERS.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_9000 INPUT
*&      Module exit_9000 INPUT
MODULE exit_9000 INPUT.
CASE sy-ucomm.
    WHEN 'CANC'.
*      MOVE perf_flag TO lbpla_exist_flag.
      flag_return = 'X'.
      SET SCREEN 0.
      LEAVE SCREEN.
ENDCASE.
ENDMODULE.                 " exit_9000 INPUT
Thanks in advance.

Hi
So the command SET SCREEN 0. LEAVE SCREEN. should "place" the program just after the calling of the popup so here:
FUNCTION z_call_screen.
* Call the Pop up screen
    CALL SCREEN 9000 STARTING AT 35 05.
"<------------------------- The program should be here after going back from popup 9000
ENDFUNCTION.
Is it true?
Max

Error in calling a selection-screen...

Hello experts,
Please look at my code below:
SELECTION-SCREEN BEGIN OF SCREEN 500 AS WINDOW.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pr_upld RADIOBUTTON GROUP grp2.
SELECTION-SCREEN COMMENT 2(20) text-007 FOR FIELD pr_upld.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 03(15) text-a11 FOR FIELD p_flnme.
PARAMETERS: p_flnme LIKE rlgrap-filename DEFAULT 'C:'.
SELECTION-SCREEN END OF LINE.
PARAMETERS: pr_list1 RADIOBUTTON GROUP grp2.
SELECTION-SCREEN COMMENT 2(7) text-003 FOR FIELD pr_list1.
SELECTION-SCREEN END OF SCREEN 500.
SELECTION-SCREEN BEGIN OF SCREEN 1500 AS WINDOW.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(22) text-002 FOR FIELD p_dcode.
PARAMETERS: p_dcode LIKE vbak-kunnr,
            p_name1 LIKE kna1-name1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pr_list2 RADIOBUTTON GROUP grp.
SELECTION-SCREEN COMMENT 2(7) text-003 FOR FIELD pr_list2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pr_add RADIOBUTTON GROUP grp.
SELECTION-SCREEN COMMENT 2(3) text-005 FOR FIELD pr_add.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pr_edit RADIOBUTTON GROUP grp.
SELECTION-SCREEN COMMENT 2(4) text-006 FOR FIELD pr_edit.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 03(20) text-a12 FOR FIELD p_code.
PARAMETERS: p_code LIKE zts0001-cdseq.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF SCREEN 1500.
IF v_compflag EQ space.
CALL SELECTION-SCREEN 500.
ELSE.
CALL SELECTION-SCREEN 1500.
ENDIF.
Now, what I want to do is that the program will call a selection-screen based on a given variable(v_compflag). But its generating an error saying that 'error generating the selection-screen'. Why is this so?
Again, thank you guys and take care!

Corrected code.
REPORT ztest_errror                            .
data: v_compflag.
SELECTION-SCREEN BEGIN OF SCREEN 500 AS WINDOW.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pr_upld RADIOBUTTON GROUP grp2.
SELECTION-SCREEN COMMENT 2(20) text-007 FOR FIELD pr_upld
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 03(15) text-a11 FOR FIELD p_flnme.
PARAMETERS: p_flnme LIKE rlgrap-filename DEFAULT 'C:'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pr_list1 RADIOBUTTON GROUP grp2.
SELECTION-SCREEN COMMENT 2(7) text-003 FOR FIELD pr_list1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF SCREEN 500.
*************SELECTION-SCREEN BEGIN OF SCREEN 1500 AS WINDOW.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(22) text-002 FOR FIELD p_dcode.
PARAMETERS: p_dcode LIKE vbak-kunnr,
          p_name1 LIKE kna1-name1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pr_list2 RADIOBUTTON GROUP grp.
SELECTION-SCREEN COMMENT 2(7) text-003 FOR FIELD pr_list2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pr_add RADIOBUTTON GROUP grp.
SELECTION-SCREEN COMMENT 2(3) text-005 FOR FIELD pr_add.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pr_edit RADIOBUTTON GROUP grp.
SELECTION-SCREEN COMMENT 2(4) text-006 FOR FIELD pr_edit.
SELECTION-SCREEN END OF LINE.
*************SELECTION-SCREEN END OF SCREEN 1500.
IF v_compflag EQ space.
CALL SELECTION-SCREEN 500.
ELSE.
CALL SELECTION-SCREEN 1500.
ENDIF.
Regards
vijay

Ios 7.1 - Barrett life further gone down to the **** and call is full screen feature remived

Yesterday I have updated my ios to latest version 7.1 .
Now am thinking if returning back to downgrade my os or some other models .
It's irritating me a lot . My battery life totally gone . In standby mode fully charged mobile not even withstanding for
3 to 4 hrs . But they are promoting IOS 7.1 as better battery life and with out any information they have removed
The caller I'd full screen features which they have mentioned as a improvement in 7 and older versions .
Please some one help me out how to get rid off this . Now, my mobile is always connected to the charger and taking changer along with my mobile wher ever. I go .
I was so excited when I was upgrading for 7.1 . But here after I will never upgrade my iPhone with out getting complete feedback abt the
Latest release .
I never expected this from apple . They are completely removing all the good features from iPhone .
I am very much addicted to called if full screen , but now they have removed thise option in ios 7.1.
Hope those bugs will be cleared in the next update and waiting for that eagerly . If not look for some other options .
It's very difficult take my charger everywhere .

Hello, erose3686.
Thank you for visiting Apple Support Communities.
Battery life can be difficult to troubleshoot as multiple factors contribute to how long a charge can last. Graphic intensive applications, environmental factors, display brightness and data connectivity are just a few of the items that can cause the battery life to decrease rapidly. I would need to know a little more information about your usage patterns to give you and idea on how to maximize battery life. However, here are some tips on how to adjust settings and charge the device that may help.
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/ht1476
About Batteries
About iPhone Batteries
If you feel that you need assistance with the battery concern, you can always reach out to us via the link below.
Contact Apple
Cheers,
Jason H.

Calling userdefined selection screen

Hi all,
here i am having scenario like
first calling a selection screen with push button, when click the button
it should call anyother selection screen and execute that with selection parameters
please let me know anyone

Hii,
      first declare a pushbutton like ( if second selection parameter is date type)
SELECTION-SCREEN PUSHBUTTON /05(20) c_date
                          USER-COMMAND cdate .
SELECTION-SCREEN BEGIN OF SCREEN 0100." AS SUBSCREEN.
SELECT-OPTIONS :       s_augdt FOR v_augdt OBLIGATORY NO-EXTENSION." no-display.
SELECTION-SCREEN END OF SCREEN 0100.
AT SELECTION-SCREEN.
*----CHECK FOR USER COMMAND - CDATE MEANS USER HAS SELECTED CLEARIND DATE BUTTON FROM SELECTION SCREEN
IF sy-ucomm = 'CDATE'.
CALL SELECTION-SCREEN 0100 STARTING AT '10' '10' ENDING AT '120' '15'.
ENDIF.
Regards,
Arti

Call report selection screen in module pool program with tab strip control

Hi,
Could anyone explain in detail to call report selection screen in module pool program with tab strip control.
Thanks
Mano

Hi,
Refer std program:
demo_sel_screen_in_tabstrip.
demo_sel_screen_with_tabstrip.
Call your program with SUBMIT stmt form module program.
Reward points if this Helps.
Manish

Calling a selection screen in a subscreen of a tabstrip

hi,
I have created a tabstrip where i have included a subscreen.
I want to create and call a selection screen within that subscreen.
Can anybody tell me the steps required?
thanks in advance,
Abhishek

hi
good
try this
In the same way that you can define a screen as a subscreen in the Screen Painter, it is now possible to define selection screens as subscreens in an ABAP program:
SELECTION-SCREEN BEGIN OF SCREEN scrn AS SUBSCREEN
[NO INTERVALS]
[NESTING LEVEL n].
SELECTION-SCREEN END OF SCREEN scrn.
go through this link
http://help.sap.com/saphelp_nw2004s/helpdata/en/e7/deb237b9a9a968e10000009b38f8cf/content.htm
http://sap.niraj.tripod.com/id40.html
thanks
mrutyun^

When my wife receives a call and her screen is locked she gets two choices. Remind me and answer. When I get a call, I get 3 buttons. Remind me, message and answer. Both are iPhone 4S with ios7.

When my wife receives a call and her screen is locked she gets two choices. Remind me and answer. When I get a call, I get 3 buttons. Remind me, message and answer. Both are iPhone 4S with ios7. Is there some setting to fix this? I thought the phones were set up identically.
Thanks.

Glad it helped. I only remembered it was there because I'd just been checking something else in that screen.
Best of luck.

Call Intercept Suggestion - Screen "International" as Well

Similar Messages

Maybe you are looking for