Call partner function from ship to party

Dear Gurus,
I have two account group A and B, A contain the partner function of SP, SH, BP and PY, and B account group having function of ship to party, bill to party and payer.
In configuration i have made the settings.
At sales order level i enter the sold to party and if enter different ship to party in the next field system call the BP and PY from Ship to party master record. that is as per requirement.
But if i presss enter after entering the sold to party no system call all the function from sold to party, and then if i change the ship to party system only change the ship to party but not again determine the BP and PY partner function from ship to party.
Kindy suggest the possibe solution so that system again the redetermine the bill to party and payer function.
Looking for the gurus response.
Regards,

Hi,
In your partner partner procedure against partner function BP or PY enter source as SH then system will determine this to functions on basis of Ship to party
Or else either you can not maintain other partner functions in sold to party master means you can take all partners from ship to
Or else manually put ship to party immediate after sold to party and then enter
Or else check any user exit available for re-determination of partner
Note : First option will definitely work, try
Kapil

Similar Messages

  • Assigning Partner Function to Ship to party.

    Hiya
    How could we assign a partner function[sales employee] to a ship to party and call it in an order...
    Thanks

    Hi Rajendra,
                 You fallow these steps this may help you to full fill your requirement.
    1.Define the partner function in the IMG-->Sales and Distribution >Basic functions>Partner Dterminatin.
    3.You pur that partner function in your ship to party procedure then chek the mark as mandatory.
    3.you assign that partner function to your ship to party account group
    4.You assign that ship to party procedure to your ship to party account group.
    5. Now you create master data with that account group here you enter the sales employee in the Partner functions tab in the sales area data.
    (Bur you need to main tain the master data for that sales employee).
    6.if you create sales order with that ship to party sales employ also will come in the sales order.
    I hope this will help you
    Regards,
    Murali.

  • Partner & Addresses not found for partner fxn Requester & Ship-To-Party

    Hi Gurus,
    We are in SRM 4.0
    A purchaser is getting the following error message while trying to convert a approved SC to PO
    Warning: No address data found
    Error: No Addresses found for partner function type Requester
    Error: Partner not found with partner function type Requester
    Error: No Addresses found for partner function type Ship-To-Party
    Error: Partner not found with partner function type Ship-To-Party
    I've checked the Requester using BBP_CHECK_USERS to find that the user is consistent.
    Any idea what might be causing this issue?
    Kind regards,
    MGS

    Thanks for that. Following the tutorial very closely. we are trying to setup 3040 850. We have many successful 4010 850.
    Still we continue to get same error. I have setup the new Business Action supporting 3040 standard, and believe all of my settings are correct according to tutorial and help files.
    Am I looking at at bug?
    Error -: AIP-50547: Trading partner agreement not found for the given input values: From party[NAME] "CUSTOMER", To party[NAME] "US", Business action name "null";

  • How to determine "Sold-to" party from "Ship-to" party

    Hi friends,
    <<text removed>>
    I have to determine the "Sold-to" party for a particular "Ship-to" party. Could you please let me know what is the Table we need to query for this??
    I have already checked out table KNVP, however I could not find the correct "Sold-to" party for the "Ship-to" party.
    <<text removed>>
    Thanks,
    Vishal.
    Edited by: Matt on Feb 11, 2009 11:22 AM  An emergency on your part doesn't consititute an emergency on our part.  To understand why your post is edited - read this http://catb.org/~esr/faqs/smart-questions.html
    Edited by: Matt on Feb 11, 2009 11:23 AM

    Hello Vishal,
    Ship-To party is assigned to Sold-To for each sales area. So the first step to get Ship-To, is to determine the Sales Area, if you don't have that then you can use the FM   SD_PARTNER_SALES_AREA_CHECK to get the Sales Area.
    If you already have the Sales area, then you can use the following FM, which will return Ship-To party code.
    *  Get Sold-To from Ship-To Party
       Call Function 'SD_PARTNER_GET_SOURCE_PARTNER'
          Exporting
             I_KUNNR             = cKUNNR  "Sold-To party
             I_PARVW             = 'WE'
             I_PARVW_SOURCE      = 'AG'
             I_VKORG             = cVKORG
             I_VTWEG             = cVTWEG
             I_SPART             = cSPART
             I_CALL_BAPI         = ' '
          Importing
             E_KUNNR             = cKUNAG
          Exceptions
             No_Partner_Found    = 1
             No_Partner_Selected = 2
             Others              = 3.
    Let us know if this helped...
    Amit Purohit.

  • Delivery idoc picks ship to contact from ship to party instead of ship-to c

    Hi experts,
    I have question on idoc.
    The idoc is picking ship to contact information from ship to party instead of picking it from ship to contact information.
    Following information are given to me.
    Message Type: DESADV
    Basic Type: DELVRY01
    Extension: ZDELVRY
    Function Group: ZIHX & Function Module: Z_RFC_IH_DELIVERY_UPDATE.
    Where do I make the changes. Please help.
    Regards
    Vince

    Hi Swathi,
    Thanks for the information I am able to find the exit, but when I set a break-point in the exit(EXIT_SAPLV56K_002) it does not go to debugging mode. Can you please let me know why...
    The field segments exists for ship to contact but pulling data from Ship to party, which I probably think
    can set it in exit.
    Can you please let me know about qualifiers...
    Thanks
    Vincent

  • Can Any one tell me what is the step in calling a function from a *.lib file in Labview application

    Hi, I am working on Labview 8.0.
    I am trying to  communicate to a thrid party HW using the driver file he has provided to me.
    The drive file is a *.lib file.
    I am unable to call the function from the lib file.
    I could get only from a DLL.
    Pls help .
    Regards
    -Patil

    patil wrote:
    When it is possible in Lab Windows, why calling a function from a static library is prohibited?
    I was trying to use Function node, but found that it is only for functions from a DLL file.
    Will CIN be useful.? 
    LabWindows is not the same as LabVIEW. LabVIEW cannot call .lib files. LIB files are intermediary products and you need to use a wrapper DLL that's compatible with the object format of the .lib file. It's as simple as that. LabWindows creates C application and from that perspective is no different than a regular C
    compiler. That's why you can call .lib files because that's how .lib
    files are used.
    A CIN, as pointed out, is something completely different and will not help you.  

  • Error: No address found for partner function type Ship-To Address

    Hi All,
    I am working in SRM 5.0(patch level1) and for PDP scenario
    When I am creating service PR in R/3 with two header items and each header item has only one below line item (service item), then it transfer in SRM properly. But if I am maintaning more than one below line item for each header item it does not transfer in SRM. In SLG1 error is coming as "No address found for partner function type Ship-To Address".
    Please suggest some solution.
    Thanx in advance
    Soma

    Hi Moon
    Please check this note
    1166211 - Delivery address from Vendor not transferred - Ext. Req.
    or do you maintain ADDR_SHIPT maintained in PPOMA_BBP
    regards
    Muthu

  • Calling a function from a DLL, exectution in background mode.

    Dear Experts,
    We have created an ABAP report the calls a function from a DLL file. If the report is executed in on-line mode the program calls and executes the function from the DLL, but if the ABAP programa is executed in background mode it doesnt calls the DLL function.
    Do you know a way to solve the problem when executing in background mode?
    Best regards.
    Antonio

    Hi Gabriel,
    Let me explain in details about my DLL function.
    We are importing the business partners from legacy system into the SAP CRM system, so at the moment we created the BP master data via BAPI, I get the name of the BP and this moment I call the function in the DLL file. I export the parameter name and I receive back a simplified string with the name reduced to a code. This code I get back from the dll it is insert in a Z table, so there is no interaction in the screen, all must be executed in background mode, because there are a lot of business partners to be converted in SAP system.
    I am sending my code for your considerations.
    Instancia a DLL
      CREATE OBJECT dll 'MTCODE.CPFONET'.
      IF sy-subrc NE 0.
        RAISE without_dll.
      ENDIF.
    Move para a tabela interna IT_NAME os valores recebidos na TI_NAME
      it_name[] = ti_name[].
    Para cada registro importado
      LOOP AT it_name.
        CLEAR v_string_ret.
        wa_matchcode-zregid     = it_name-zregid.
        wa_matchcode-name1_text = it_name-name1_text.
        v_string = it_name-name1_text.
        CONDENSE  v_string.
        TRANSLATE v_string TO UPPER CASE.
        CALL METHOD  OF dll 'SetNome' EXPORTING #1 = v_string.
        CALL METHOD  OF dll 'ExecMatch'.
        CALL METHOD  OF DLL 'GetMCData' = v_string_ret.
        FREE OBJECT dll.
      Preenche os campos do match-code de acordo com o retorno da DLL
        SPLIT v_string_ret
        AT '|'
        INTO wa_matchcode-zparmcln
             wa_matchcode-zparmcfn
             v_empty
             wa_matchcode-name_first
             wa_matchcode-name_last
             wa_matchcode-namemiddle.
      Adiciona o registro com o match-code correspondente na TE_MATCHCODE
        APPEND wa_matchcode TO te_matchcode.
      ENDLOOP.

  • How can I call a function from a procedure

    I have a function named: f_calc_value which return the variable v_result. This function is part of a package.
    How can I call this function from a new procedure I am creating?
    Thanks

    or refer this theread....calling function from procedure

  • Replication Of Z Partner Functions from CRM to ECC

    HI All,
    We are creating the " Z Partner Functions " in SAP CRM & ECC.in our scenario partner functions flows from CRM to ECC and we want to replicate these partner functions from CRM to ECC.
    So can some onle please tell me how to do this?.
    Thanks in Advance,
    Arun

    1. Create the partner function in ECC
    2.  Assign the partner function to the relevant partner procedure in ECC
    3. Create a partner function in CRM
    4. Map the partner function as follows:
    Customer Relationship Management
    --> Basic Functions
    --> Partner Processing
    --> Data Transfer
    --> Distribution of Partner Functions from R/3 into CRM
    Create the following entry:
    Partner function in R/3         Function
    and also the below:
    Create a mapping entry for data transfer from CRM to R/3 via the
    following IMG activity in CRM:
    Customer Relationship Management
    --> Basic Functions
    --> Partner Processing
    --> Data Transfer
    --> Distribution of Partner Functions from CRM into R/3
    Create the following entry:
    Function     R/3 function    Type in R/3

  • Can I call a function from a dll in LabVIEW that returns:double*string and int.?

    I have a function from a dll that return a double* string and an integer. How can I call this function from LabVIEW? There is a possibility to work in LabVIEW with a double* string?

    pcbv wrote:
    > Hello all,<br><br>The header of the function is:
    >
    > "HRESULT WRAPIEnumerateDevices(WRAPI_NDIS_DEVICE **ppDeviceList, long *plItems);"
    >
    > where WRAPI_NDIS_DEVICE have this form:
    >
    > typedef struct WRAPI_NDIS_DEVICE<br>{<br>
    > WCHAR *pDeviceName;<br>
    > WCHAR *pDeviceDescription;<br><br>}
    > WRAPI_NDIS_DEVICE;<br><br>
    >
    > The function is from WRAPI.dll, used for communication with wireless card.
    > For my application I need to call in LabVIEW this function.
    Two difficulties I can see with this.
    First the application seems to allocate the array of references
    internally and return a pointer to that array. In that case there must
    be another function which then deallocates that array again.
    Then you would need to setup the function call to have a pointer to an
    int32 number for the deviceList parameter and another pointer to int32
    one for the plItems parameter.
    Then create another function in your DLL similar to this:
    HRESULT WRAPIEnumExtractDevice(WRAPI_NDIS_DEVICE *lpDeviceList, long i,
    CHAR lpszDeviceName, LONG lenDeviceName,
    CHAR lpszDeviceDesc, LONG lenDeviceDesc)
    if (!lpDeviceList)
    return ERROR_INV_PARAMETER;
    if (lpDeviceList[i].pDeviceName)
    WideCharToMultiByte(CP_ACP, 0,
    pDeviceList[i].pDeviceName, -1,
    lpszDeviceName, lenDeviceName,
    NULL, NULL);
    if (lpDeviceList[i].pDeviceName)
    WideCharToMultiByte(CP_ACP, 0,
    pDeviceList[i].pDeviceDescription, -1,
    lpszDeviceDesc, lenDeviceDesc,
    NULL, NULL);
    return NO_ERROR;
    Pass the int32 you got from the first parameter of the previous call as
    a simple int32 passed by value to this function (and make sure you don't
    call this function with a higher index than (plItems - 1) returned from
    the first function.
    Rolf Kalbermatter
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions

  • Fetch Sales order number and PO number from ship to party and sold to party

    HI,
    I need to get Sales order number and PO number
    from ship to party and sold to party.
    I have only ______sold to party and ship to party and req del date_______ in selection screen as mandatory
    Please let me know
    Sreekanth

    Hi,
    You can do this:-
    SELECT VBELN FROM LIKP
    INTO TABLE T_DELIVERIES
    WHERE KUNNR = SHIP TO PARTY
    AND     KUNAG = SOLD TO PARTY
    AND LFDAT      = DEL DATE.
    You will get a table containing the list of deliveries.
    Use VBFA to get the sales orders from deliveries.
    SELECT VBELV FROM VBFA
    INTO TABLE T_SALESORDERS
    WHERE VBTYP_N = 'J'
    AND     VBELN  = T_DELIVERIES-VBELN.
    T_SALESORDERS WILL give you list of sales orders.
    From Sales Orders you can get Purchase orders through EKKN Table.
    Using EKKN pass T_SALESORDERS-VBELN and get corresponding EBELN.
    Regards,
    SUbhashini

  • How to call javascript function from PL/SQL procedure

    Can anybody advice me how to call javascript function from PL/SQL procedure in APEX?

    Hi,
    I have a requirement to call Javascript function inside a After Submit Process.
    clear requirement below:
    1. User selects set of check boxes [ say user want to save 10 files and ticks 10 checkboxes]
    2. user clicks on "save files" button
    3. Inside a After submit process, in a loop, i want to call a javascript function for each of the file user want to save with the filename as a parameter.
    Hope this clarify U.
    Krishna.

  • Download Z Partner Function from R/3

    How to download a customer specific Partner function from R/3 to CRM.
    Have done PIDE settings in R/3.
    Have done number ranges and groupings in CRM.

    Hi,
    Which grouping you checked in CRM?
    Have you check data transfer R/3-CRM and CRM-R/3
    in tcode SPRO : CRM->Basic Functions->Partner Processing->
    Data Transfer->Distribution Partner Functions from R/3 into CRM
    CRM->Basic Functions->Partner Processing->
    Data Transfer->Distribution Partner Functions from CRM into R/3
    Hope this help
    Gun.

  • Calling user function from Interface mapping

    I am getting error "Bad query:ORA-00904: invalid identifier" while calling function in the mapping of an interface.
    Can some one provide the syntax of calling user function from interface mapping.
    Thanks,
    RP

    user452108 wrote:
    Can some one provide the syntax of calling user function from interface mapping.Oracle's Call Iinterface, the OCI, does not work differently when coding using a Dvorak keyboard, or writing code using a pretty pink font in the editor.. or coding the call from an interface mapping (whatever the hell that that is).
    You have 2 types of calls. SQL and PL/SQL.
    To call a function via SQL, it can be done using a the standard cursor interface. E.g.
    select MyFunkyFunction from dualIt will return the function value via a single row with a single column. The standard cursor fetch and close cursor calls are used.
    To call it via PL/SQL, an anonymous PL/SQL block is needed, and the caller needs to use a bind variable to receive the value from the function. The anon block will look as follows:
    begin
      :bindVar := MyFunkyFunction;
    end;Refer to your client's abstract layer for interfacing with the Oracle Call Interface, on how to deal with bind variables.

Maybe you are looking for