Call tp EP and sending multiple rows of records
Hello friends,
I am creating a screen and am sending back to EP an user ID.
However I would like to send Multiple User-Ids.
Below is the code of what AM I doing.
str = userid. " NOTE - I would like to send Multiple IDS.
lv_value_label->set_string_struct_element( element = str
label_name = 'MAINTID' ).
it_result_state-result_state = 'APPROVED'.
APPEND it_result_state TO it_result_states.
CALL METHOD eup_structure_factory=>pack_value_label_to_xml
EXPORTING
iv_value_label = lv_value_label
IMPORTING
ev_xml = str.
CALL FUNCTION 'EUP_STORE_BSP_OUTPUT_DATA'
EXPORTING
iv_process_id = process_id
iv_task_id = task_id
iv_output_value = str
TABLES
it_result_states = it_result_states.
Dear Ster,
I think you are having all the user id's in an internal table.
Why dont you loop your internal table and pass those values in the standard FM you represented ('EUP_STORE_BSP_OUTPUT_DATA').
I'm not aware that, whether there is any Standard FM's to be used for sending multiple user ID's. Will check and let you know.
Hope this will be helpful.
Regards,
Gokul.N
Similar Messages
-
Question:
There is a scenario that users want to send multiple rows returned by Execute SQL Task as Email content to send to someone. With Execute SQL Task, the Full result set is used when the query returns multiple rows, it must map to a variable of the Object data
type, then the return result is a rowset object, so we cannot directly send the result variable as Email content. Is there a way that we can extract the table row values that are stored in the Object variable as Email content to send to someone?
Answer:
To achieve this requirement, we can use a Foreach Loop container to extract the table row values that are stored in the Object variable into package variables, then use a Script Task to write the data stored in packages variables to a variable, and then set
the variable as MessageSource in the Send Mail Task.
Add four variables in the package as below:
Double-click the Execute SQL Task to open the Execute SQL Task Editor, then change the ResultSet property to “Full result set”. Assuming that the SQL Statement like below:
SELECT Category, CntRecords
FROM [table_name]
In the Result Set pane, add a result like below (please note that we must use 0 as the result set name when the result set type is Full result set):
Drag a Foreach Loop Container connects to the Execute SQL Task.
Double-click the Foreach Loop Container to open the Foreach Loop Editor, in the Collection tab, change the Enumerator to Foreach ADO Enumerator, then select User:result as ADO object source variable.
Click the Variable Mappings pane, add two Variables as below:
Drag a Script Task within the Foreach Loop Container.
The C# code that can be used only in SSIS 2008 and above in Script Task as below:
public void Main()
// TODO: Add your code here
Variables varCollection = null;
string message = string.Empty;
Dts.VariableDispenser.LockForWrite("User::Message");
Dts.VariableDispenser.LockForWrite("User::Category");
Dts.VariableDispenser.LockForWrite("User::CntRecords");
Dts.VariableDispenser.GetVariables(ref varCollection);
//Format the query result with tab delimiters
message = string.Format("{0}\t{1}\n",
varCollection["User::Category"].Value,
varCollection["User::CntRecords"].Value
varCollection["User::Message"].Value = varCollection["User::Message"].Value + message;
Dts.TaskResult = (int)ScriptResults.Success;
The VB code that can be used only in SSIS 2005 and above in Script Task as below, please note that in SSIS 2005, we should
change PrecompileScriptIntoBinaryCode property to False and Run64BitRuntime property to False
Public Sub Main()
' Add your code here
Dim varCollection As Variables = Nothing
Dim message As String = String.Empty
Dts.VariableDispenser.LockForWrite("User::Message")
Dts.VariableDispenser.LockForWrite("User::Category")
Dts.VariableDispenser.LockForWrite("User::CntRecords")
Dts.VariableDispenser.GetVariables(varCollection)
'Format the query result with tab delimiters
message = String.Format("{0}" & vbTab & "{1}" & vbLf, varCollection("User::Category").Value, varCollection("User::CntRecords").Value)
varCollection("User::Message").Value = DirectCast(varCollection("User::Message").Value,String) + message
Dts.TaskResult = ScriptResults.Success
End Sub
Drag Send Mail Task to Control Flow pane and connect it to Foreach Loop Container.
Double-click the Send Mail Task to specify the appropriate settings, then in the Expressions tab, use the Message variable as the MessageSource Property as below:
The final design surface like below:
References:
Result Sets in the Execute SQL Task
Applies to:
Integration Services 2005
Integration Services 2008
Integration Services 2008 R2
Integration Services 2012
Integration Services 2014
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.Thanks,
Is this a supported scenario, or does it use unsupported features?
For example, can we call exec [ReportServer].dbo.AddEvent @EventType='TimedSubscription', @EventData='b64ce7ec-d598-45cd-bbc2-ea202e0c129d'
in a supported way?
Thanks! Josh -
Adding and Deleting Multiple Rows or Columns
How do you add or delete more than one row or column at a time.
Robby! wrote:
That's a great finding!
I just wrote a feedback requesting a shortcut like this.
It is a pity though that they desing it to work only if you select the header of the row/column. It should be enabled to work from within any cell in the table.
Who wrote such an error ?
These interesting shortcuts behave flawlessly even if the cursor was in D18 for instance.
(a) I never saw them in the delivered resources.
(b) they aren't responding to the OP's question which was about "Adding and Deleting Multiple Rows and Columns"
Yvan KOENIG (from FRANCE vendredi 3 octobre 2008 18:39:01) -
Calling stored procedure and returning multiple resultsets
Hello,
Is it possible to create a procedure that return multiple result sets?
e.g.
procedure GetDataFromTables() is
begin
select * from table_one;
select * from table_two;
end GetDataFromTables;
And I want to call this procedure that returns multiple resultsets (one for table_one and another for table_two)
I have referred to the OCCI sample occiproc.cpp, but I am not sure how to handle multiple resultsets.
Your help is highly appreciated.Thank You,
Got the REF cursor in storedproc.cpp.
But as it is documented, getCursor() gets the REF CURSOR value of an OUT parameter as a ResultSet.
So, is it true that if I have to write a procedure that selects * from 50 tables (50 SQL statements) , I have to set 50 OUT parameters to get the result sets.?
Is there any better way of doing this?
e.g. in DB2, we can open multiple cursors in the procedure body and then get the result set one after another.
CREATE PROCEDURE get_staging_data ()
RESULT SETS 1 <no. of result sets>
LANGUAGE SQL
BEGIN ATOMIC
DECLARE L_SQL varchar(5000);
DECLARE c CURSOR WITH RETURN TO CLIENT FOR L_STMT;
SET L_SQL = '';
SET L_SQL = 'SELECT * FROM ';
SET L_SQL = L_SQL || IN_Tab_Name ;
SET L_SQL = L_SQL || ' WHERE VERIFY_FLAG=''S'' FOR READ ONLY OPTIMIZE FOR 2000 ROWS' ;
PREPARE L_STMT FROM L_SQL;
OPEN c; < can open multiple cursors in the prodedure body>
END -
Updating and deleting multiple rows
Hi!
I have a form on a table with report page where I can filter data through columns.
1. Is it possible to create a button that will delete all the filtered data?
2. Also, I would like to be able to update any column of the filtered dataset to a certain value (that needs to be input somehow). Is that possible?
So far I can only update or delete one row at a time, which isn't useful as I sometimes need to change 100 rows at a time with the same value or delete them.
When I use tabular form, I can't filter rows, but I can delete multiple rows...
Also if there are similar examples, could you please send me a link; I can't seem to find any.
I'm using Apex 4.2.2.
Best Regards,
IvanDeleting multiple rows - [url https://forums.oracle.com/forums/thread.jspa?threadID=2159983]common question
Best answered with Martin's example
http://www.talkapex.com/2009/01/apex-report-with-checkboxes-advanced.html
Depends how you filter your data. You could identify all your limiting variables, and reverse the where clause in a delete process.
As for point 2, you can define a button that redirects to the page, and you can defined all the item values you like using the Action link.
There is likely an example in the supplied package applications.
Scott -
Sending multiple rows to result set
Hi,
I want multiple rows to be returned from my pl/sql procedure without using cursor?can I do it? Is there any package for this?
also When I use cursor variable how do I capture that return values?
regards
raghFirst Question:
grin. One really big string and a custom parser.
Seriously... I read something about PL/SQL tables being supported in a late/future release... is that true? Do we still use a ref cursor, or can we pass VARRAYS somehow back to Java?
Third question:
Posted earlier by Mark Tomlinson:
This one does it all. Nothing JDeveloper specific here, all JDBC.
* This sample shows how to call a PL/SQL function that opens
* a cursor and get the cursor back as a Java ResultSet.
import java.sql.*;
import java.io.*;
// Importing the Oracle Jdbc driver package makes the code more
readable
import oracle.jdbc.driver.*;
public class retrefcur_samp
public static void main (String args [])
// throws SQLException
try
// Load the driver
DriverManager.registerDriver(new
oracle.jdbc.driver.OracleDriver());
// Connect to the database
// You can put a database name after the @ sign in the
connection URL.
Connection conn =
DriverManager.getConnection ("jdbc:oracle:oci8:@ora8tst",
"scott", "tiger");
// Create the stored procedure
init (conn);
// Prepare a PL/SQL call
CallableStatement call =
conn.prepareCall ("{ ? = call java_refcursor.job_listing
// Find out all the CLERKs person
call.registerOutParameter (1, OracleTypes.CURSOR);
call.setString (2, "*");
call.execute ();
OracleResultSet rset = (OracleResultSet)call.getObject (1);
// Dump the cursor
while (rset.next ()){
System.out.println (rset.getString ("JOB"));
rset.close();
call.close();
} catch(SQLException esql) {
System.out.println("Trouble in river city ");
System.out.println(esql.toString());
// Utility function to create the stored procedure
static void init (Connection conn)
throws SQLException
Statement stmt = conn.createStatement ();
stmt.execute ("create or replace package java_refcursor as "
+
" type myrctype is ref cursor return
EMP%ROWTYPE; " +
" function job_listing (j varchar2) return
myrctype; " +
"end java_refcursor;");
stmt.execute ("create or replace package body java_refcursor
as " +
" function job_listing (j varchar2) return
myrctype is " +
" rc myrctype; " +
" begin " +
" open rc for select * from emp; " +
" return rc; " +
" end; " +
"end java_refcursor;");
stmt.execute ("create or replace package java_ref_clean as "
+
" type myrctype is ref cursor; " +
" function cleanup (cc myrctype) return
number; " +
"end java_ref_clean;");
stmt.execute ("create or replace package body java_ref_clean
as " +
" function cleanup (cc myrctype) return number
is "+
" result number; " +
" begin " +
" close cc; " +
" end; " +
"end java_ref_clean;");
null -
How to send multiple row data into an internal table??
I have a view with table control.i want to select multiple row and send all the row data into an internal table.i am able to select multiple row but all the selected row data is not going to the internal table.....only a particular row data which is lead selected is going.
Do anyone can help me regarding this issue?
Thanks in advance,
Subhasis.Hey,
Some code example:
declaring an internal table and work area to get all the elements from the node.
data : lt_Elements type WDR_CONTEXT_ELEMENT_SET,
ls_Element type WDR_CONTEXT_ELEMENT_SET,
considering flights is my node.
lt_data type sflight.
Node_Flights is the ref of the node to which ur table is binded.
Use Code Inspector to read the node.
lt_Element = Node_Flights->GET_ELEMENTS
loop at lt_elements into ls_Element.
l_bollean = ls_elements->is_selected ( returns abap true/false ).
if l_bollean IS INITIAL.
append ls_Element to lt_data.
endif.
Hope this would help.
Cheers,
Ashish -
Join tables and replicate (multiple rows)
Hi,
i have two tables TAB1 (A, B, C) and TAB2 (C, D)
i want to join the tables and replicat such that the resultant table TAB3 has columns A, B, D
select x.a, x.b, y.d from tab1 x join tab2 y on x.c=y.c where y.d=1;
but the problem here is that the above command gives multiple rows and i need all those to be in the target table. When i am using SQLEXEC-QUERY in the mapping, only the first search result is being entered into the TAB3. Then i Found out that sqlexec will return only one value. But i need all the search results to be replicated.
What alternatives are there and what GG recommend in such use case?
Any helpful advice is much appreciated.
thanks,
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Productionthe problem to use SP to check every time before insert/update is that there will be around 15 tables not 2 and there will be lakhs of rows in each table, SP which checks every insert will cause a lot of overhead and lag. I cannot afford that.
More over there will be around 60 values of D and or each value of D there will be Lakhs of rows associated in TAB1
I need to set up different extract and replicat processes for each set of rows associated with each value of D
for example the values of column D are 1-30
for D=1 there are 1.5lakh rows in TAB1 and EXT1, REP1 for this set of rows
D=2 => 2lakhs rows in TAB2 and EXT2, REP2 for this set of rows
D=3 => 1lakhs rows in TAB2 and EXT3, REP3 for this set of rows...etc
this is to ensure that if i want to stop replicating data associated with D=1(which i need to do) i can stop only REP1 and keep the rest of the data associated with D=2-30 in sync
As far as materialized views are concerned, i need to do it with goldengate only
Thanks -
Finding and averaging multiple rows
Hello,
I am having a little problem and was wondering if anyone had any ideas on how to best solve it.
Here is the problem:
- I have a large file 6000 rows by 2500 columns.
- First I sort the file by columns 1 and 2
- then I find that various rows in these two columns (1 and 2) have duplicate values, sometimes only twice, but sometimes three or four, or five or up to 9 times.
- this duplication occurs in only the first two columns, but we don't know in which rows and we don't know how much duplication there is. The remaining columns, i.e. column 3 to column 2500, for the corresponding rows contain data.
- Programatically, I would like to find the duplicated rows by searching columns 1 and 2 and when I find them, average the respective data for these rows in columns 3 to 2500.
- So, once this is done I want to save the averaged data to file. In each row this file should have the name of colunm 1 and 2 and the averaged row values for columns 3 to 2500. So the file will have n rows by 2500 columns, where n will depend on how many duplicated rows there are in the original file.
I hope that this makes sense. I have outlined the problem in a simple example below:
In the example below we have two duplicates in rows 1 and 2 and four duplicates in rows 5 to 8.
Example input file:
Col1 Col2 Col3 ... Col2500
3 4 0.2 ... 0.5
3 4 0.4 ... 0.8
8 5 0.1 ... 0.4
7 9 0.7 ... 0.9
2 8 0.1 ... 0.5
2 8 0.5 ... 0.8
2 8 0.3 ... 0.2
2 8 0.6 ... 0.7
6 9 0.9 ... 0.1
So, based on the above example, the first two rows need averaging (two duplicates) as do rows 5 to 8 (four duplicates). The output file should look like this:
Col1 Col2 Col3 ... Col2500
3 4 0.3 ... 0.65
8 5 0.1 ... 0.4
7 9 0.7 ... 0.9
2 8 0.375 ... 0.55
6 9 0.9 ... 0.1
Solved!
Go to Solution.Well, here's an initial crack at it. The premise behind this
solution is to not even bother with the sorting. Also, trying to read
the whole file at once just leads to memory problems. The approach
taken is to read the file in chunks (as lines) and then for each line
create a lookup key to see if that particular line has the same first
and second columns as one that we've previously encountered. A shift
register is used to keep track of the unique "keys".
This
is only an initial attempt and has known issues. Since a Build Array is
used to create the resulting output array the loop will slow down over
time, though it may slow down, speed up, and slow down as LabVIEW
performs internal memory management to allocate more memory for the
resultant array. On the large 6000 x 2500 array it took several minutes on my computer. I did this on LabVIEW 8.2, and I know that LabVIEW 8.6
has better memory management, so the performance will likely be
different.
Attachments:
Averaging rows.vi 30 KB -
Insert multiple rows of records into the database
The codes below allow me to insert a row of record into the database. How would I changed these to insert multiple rows at once? Please help!
String sql = "INSERT INTO EMPLOYEES" +
"(First_Name, Last_Name, Title, Phone) " +
" VALUES " +
PreparedStatement statement = conn.prepareStatement(sql);
statement.setObject (1, First_Name);
statement.setObject (2, Last_Name);
statement.setObject (3, Title);
statement.setObject (4, Phone);
boolean returnValue = statement.execute();Hi mystiqueX,
As wmolosho has suggested in his answer to this very same question that you also posted to the JavaServer Pages forum, you can create a batch of inserts and perform them using the "executeBatch()" method. I will use Craig's sample code to demonstrate:
(Note that this code is untested!)
conn.setAutoCommit(false);
PreparedStatement statement = conn.prepareStatement(sql);
// assume you have an array of objects here
for (int i = 0; i < data.length; i++) {
statement.setString(1, data<i>.getFirstName());
statement.setString(2, data<i>.getLastName());
statement.setString(3, data<i>.getTitle());
statement.setString(4, data<i>.getPhone());
statement.addBatch();
statement.executeBatch();
conn.commit();If you are not familiar with it, allow me to suggest looking at the Making Batch Updates lesson on the Java Tutorial.
Hope it helps.
Good Luck,
Avi. -
How to loop through single XML File and send multiple RFC calls?
I am looking for the best approach to use for making multiple RFC calls (can be sequential) using a single XML file of data. I have been attempting to get a BPM loop working, but to no avail. My RFC only accepts a single set of delivery input and I have been told to try to work with it as is.
input xml sample:
<?xml version="1.0" encoding="UTF-8"?>
<ProofOfDelivery>
<POD>
<delivery_number>1</delivery_number>
<carrier_name>UPS</carrier_name>
</POD>
<POD>
<delivery_number>2</delivery_number>
<carrier_name>UPS</carrier_name>
</POD>
</ProofOfDelivery>
I need to make a synchronous RFC call for each set of POD data.
Thanks in advance!Thanks for the inputs.
I tried with a BPM and multi-mapping transformation before a ForEach block. I am getting this error:
Work item 000000028028: Object FLOWITEM method EXECUTE cannot be executed
Error during result processing of work item 000000028029
com/sap/xi/tf/_ProofOfDeliveryMultiMapping_com.sap.aii.utilxi.misc.api.BaseRuntimeExceptionRuntim
Error: Exception CX_MERGE_SPLIT occurred (program: CL_MERGE_SPLIT_SERVICE========CP, include: CL_
Probably because I am not making/using the container objects properly. Here is a screenshot of my BPM. Can anyone spot my issue or point me to an example on this sort of container use?
[http://kdwendel.brinkster.net/images/bpm.jpg|http://kdwendel.brinkster.net/images/bpm.jpg]
Thanks -
Send multiple rows to database from a dynamic table.
I'm using JSP for my application. I have a table that changes
in size depending on a value a user selects in a drop down list.
They can then enter some values into the table and click the submit
button. I know for whatever reason Dreamweaver only sends the first
row to the database and I've had a hard time finding good
examples/tutorials showing how I could make it send all the rows to
the database.
Is there a way for me to just do a while/for loop taking into
account the number of rows in the table? That would be ideal for me
as it sounds like the simplest method and I'm very new to web
development.
Should I be using the Server Behavior Builder or a Stored
Procedure and if so is there any good examples for those as I've
had a hard time working with any documentation/tutorials I've found
regarding them.
Any help would be greatly appreciated.Hey Baxter, thanks for the response. I guess I should have
been more specific when I said I was new to Web Development. I am
actually in Software Development where I primarily code in Java and
other OO languages. I have worked with a database before in java by
writing my own servlet. I have also done some HTML so jsp is very
good for me as it is mostly java with the odd bit of html
structuring with tables and such.
Languages like PHP and ASP I am not very familiar with and
most of the solutions I find for this very problem revolve around
ASP. I have just found it very hard to find a solution to this
problem. It seems like it isn't talked about very much even in
Dreamweaver's own documentation. If a stored procedure is the only
way to go then I think I can handle it with some guidance if anyone
knows of some tutorials/examples available.
Also is it really not possible to just go into the code and
somehow make it loop through each row in the table and execute a
prepared statement for each row? I've included some code of the
dynamic table I have and as you can see I have a Submit button on
its own outside of the table. If i had it inside then the user
would have to submit each row individually which isn't realistic
when there are many rows of data. Since the Submit is outside of
the while it only gets called once after the table is populated
thus sending only one row of data.
You might want to copy paste the code into a text editor as
some of the lines are long and may be hard to read here. If you
notice any errors in the table itself like mismatching column
headers it is because I changed some column names before attaching
it here so just assume that the table is all built correctly.
PS: I am going to be out of town for five days or so, so if I
don't reply to you right away don't think I disappeared from this
thread. Thanks again.
<div>
<h2>TableData</h2>
<form ACTION="<%=MM_editAction%>" METHOD="POST"
name="tabledata">
<table>
<% if (!Recordset1_isEmpty ) { %>
<tr>
<td class="head">Name1</td>
<td class="head">Name2</td>
<td class="head">Name3</td>
<td class="head">Code1</td>
<td class="head">Code2</td>
<td class="head">Old Status1</td>
<td class="head">New Status1</td>
<td class="head">Old Status2</td>
<td class="head">New Status2</td>
<td class="head">Year</td>
</tr>
<% } /* end !Recordset1_isEmpty */ %>
<% while
((Recordset1_hasData)&&(Repeat1__numRows-- != 0)) { %>
<% if (szin11 ==2) {color11 = "#ECECEC" ;szin11=(0);}
%><tr>
<td><input type="hidden"
value="<%=((((Recordset1_data =
Recordset1.getObject("Name1"))==null ||
Recordset1.wasNull())?"":Recordset1_data))%>" name="Name1"
/><%=(((Recordset1_data =
Recordset1.getObject("Name1"))==null ||
Recordset1.wasNull())?"":Recordset1_data)%></td>
<td><input value="<%=((((Recordset1_data =
Recordset1.getObject("Name2"))==null ||
Recordset1.wasNull())?"":Recordset1_data))%>" name="Name2"
type="hidden" /><%=(((Recordset1_data =
Recordset1.getObject("Name2"))==null ||
Recordset1.wasNull())?"":Recordset1_data)%></td>
<td><input value="<%=((((Recordset1_data =
Recordset1.getObject("Name3"))==null ||
Recordset1.wasNull())?"":Recordset1_data))%>" name="Name3"
type="hidden" /><%=(((Recordset1_data =
Recordset1.getObject("Name3"))==null ||
Recordset1.wasNull())?"":Recordset1_data)%></td>
<input name="Code1" type="hidden"
value="<%=(((Recordset1_data =
Recordset1.getObject("Code1"))==null ||
Recordset1.wasNull())?"":Recordset1_data)%>" />
<td><input value="<%=((((Recordset1_data =
Recordset1.getObject("Code2"))==null ||
Recordset1.wasNull())?"":Recordset1_data))%>" name="Code2"
type="hidden" /><%=(((Recordset1_data =
Recordset1.getObject("Code2"))==null ||
Recordset1.wasNull())?"":Recordset1_data)%></td>
<td><input value="<%=((((Recordset1_data =
Recordset1.getObject("Old Status1"))==null ||
Recordset1.wasNull())?"":Recordset1_data))%>" name="Old Status1"
type="hidden" /><%=(((Recordset1_data =
Recordset1.getObject("Old Status1"))==null ||
Recordset1.wasNull())?"":Recordset1_data)%></td>
<td><input size="10"
value="<%=((((Recordset1_data = Recordset1.getObject("New
Status1"))==null ||
Recordset1.wasNull())?"":Recordset1_data))%>" name="New Status1"
type="hidden" />
<%=(((Recordset1_data = Recordset1.getObject("New
Status1"))==null ||
Recordset1.wasNull())?"":Recordset1_data)%></td>
<td><input name="New Status1" type="text" size="5"
/></td>
<td><input size="10"
value="<%=((((Recordset1_data = Recordset1.getObject("Old
Status2"))==null ||
Recordset1.wasNull())?"":Recordset1_data))%>" name="Old Status2"
type="hidden" />
<%=(((Recordset1_data = Recordset1.getObject("New
Status2"))==null ||
Recordset1.wasNull())?"":Recordset1_data)%></td>
<td><input name="New Status2" type="text" size="5"
/></td>
<td><%=(((Recordset1_data =
Recordset1.getObject("Year"))==null ||
Recordset1.wasNull())?"":Recordset1_data)%>
<input name="Year" type="hidden"
value="<%=(((Recordset1_data =
Recordset1.getObject("Year"))==null ||
Recordset1.wasNull())?"":Recordset1_data)%>"
/></td></tr>
<% if (szin11 ==0) {color11 = "#FFFFFF"; szin11=(0);}
%>
<% szin11++; %>
<%
Repeat1__index++;
Recordset1_hasData = Recordset1.next();
%>
</table>
<p>
Comments<br />
<textarea name="comments" cols="40"
rows="4"></textarea>
</p>
<p>
<input type="submit" value="Submit" />
</p>
<input type="hidden" name="MM_insert" value="tabledata"
/>
</form>
</div> -
I have an IPhone 4 , which is on a Vodafone network, when I try and make outgoing calls it says 'call failed' . I am still able to send/receive SMS and IM and receiving calls is also so problem, does anyone have any solutions?
You need to contact Vodafone.
-
In PAI module call a method and send reference to module.
Hi,
In object oriented languages like Java you can send the reference to an object to a method, something like: object1.callFunction(me)
where "me" is the reference to the object calling the function. So the "object1" can call methods inside "me".
I want to do the same in a screen. I want to do the following. In the PBO module when the screen initializes I want to do:
PROCESS BEFORE OUTPUT.
MODULE init_screen_0100.
CALL FUNCTION some_function
EXPORTING me
where me is the reference to the screen.
Is this possible, and if yes, how to do this?
After this I am going to from another object trigger events in this screen, thats why I want the reference to it.
regards
BaranHi Baran,
This thing is not possible with module pool program.......
In case you want to do something like this do it with call screen or leave to screen so that you are you can go to next screen...
Thanks and Regards,
Kunjal Patel -
Display only one row for distinct columns and with multiple rows their valu
Hi,
I have a table having some similar rows for some columns and multiple different rows for some other columns
i.e
o_mobile_no o_doc_date o_status d_mobile_no d_doc_date d_status
9825000111 01-jan-06 'a' 980515464 01-feb-06 c
9825000111 01-jan-06 'a' 991543154 02-feb-06 d
9825000111 01-jan-06 'a' 154845545 10-mar-06 a
What i want is to display only one row for above distinct row along with multiple non distinct colums
ie
o_mobile_no o_doc_date o_status d_mobile_no d_doc_date d_status
9825000111 01-jan-06 'a' 980515464 01-feb-06 c
991543154 02-feb-06 d
154845545 10-mar-06 a
regards,
KumarRe: SQL Help
Maybe you are looking for
-
Adobe Cloud: Can't login
Okay, I'm logged in here, and I can get to the https:// login page, but there is no way of logging in to the creative cloud. I see a completely blank page. I'm using Firefox on an Windows 7 box. Where do I go to login in, or solve this problem?? Firs
-
hai all Is there any easy method to find the table name and field name from short description for a particular field? (i had only short description of a particular field..i need field name and table name ) kindly help rewards will be given for useful
-
Error during distribution for compiled code generation-Reply
Hi, Looking at your error messages, it looks as though your build is failing during the code generation phase of an autocompilation. To determine why the code generator crashed, either look in the $FORTE_ROOT/log/forte_ex*.log files or don't use auto
-
Captivate 4 previewing and publishing issues
I downloaded and installed Captivate 4 on my computer. I'm a current user of Captivate 3. I imported one of my projects into Captivate 4, but when I try to Preview or Publish the project nothing happens. When I published the project to HTML, it only
-
Unanswered question on keynote narration
Sorry to post this again, but I still have no idea why slideshows that contain a narration (through 'record slideshow') become so large: Hi. A long time lurker, but new poster. I've searched around but can't find a topic that deals with this problem.