Error during distribution for compiled code generation-Reply

Hi,
Looking at your error messages, it looks as though your build is failing during the code generation phase of an autocompilation. To determine why the code generator crashed, either look in the $FORTE_ROOT/log/forte_ex*.log files or don't use autocompilation and use fcompile.
There are many reasons why the code generator could crash. Some of the things I've come across are running out of memory and trying to find invalid classes.
If its the invalid class problem you'll find a message like:
Generating code for partition BLTCustomWindow_cl0_Part1.
ERROR: Exiting due to following exception:
SYSTEM ERROR: Client partition FTCompile_cl0_Client was terminated by escaped
exception. See the remainder of the error stack for more information.
Class: qqsp_ResourceException
Error #: [1001, 3]
Detected at: qqrt_ForteExecAgent::LoadPartition at 1
Error Time: Tue Aug 18 17:52:44
Exception occurred (locally) on partition "Forte_Executor", (partitionId =
9EA25A00-36FE-11D2-87C4-502F15BEAA77:0x1, taskId =
[9EA25A00-36FE-11D2-87C4-502F15BEAA77:0x1.6]) in application
"FTCompile_cl0", pid 28331 on node stardev in environment <unknown>.
FATAL ERROR: Invalid class ProductBMServices.ProductSecurityMgrProxy
(0x4ecd,0x19a)
Class: qqsp_ImplementationException
Detected at: qqcg_TRclass::SetClass at 2
Last TOOL statement: method ForteCompiler.ProcessPGF
Error Time: Tue Aug 18 17:52:44
Exception occurred (locally) on partition "Forte_Executor",
(partitionId = 9EA25A00-36FE-11D2-87C4-502F15BEAA77:0x1, taskId =
[9EA25A00-36FE-11D2-87C4-502F15BEAA77:0x1.6]) in application
"FTCompile_cl0", pid 28331 on node stardev in environment <unknown>.
The solution for this instance is to clean up the invalid classes using the c4tstdrv utility.
c4tstdrv > setrepos star8
c4tstdrv > setwork dmcompiledbuild
c4tstdrv > open
Type Service Flags Level
err sh * 255
trc rp 1 4
c4tstdrv > findproj productbmservices
c4tstdrv > cleanuprtclasses
Removing extraneous RTclass ProductShootingLocationMgrProxy
Removing extraneous RTclass PRTerritoryBaseMgrProxy
Removing extraneous RTclass PRTerritoryMgrProxy
Removing extraneous RTclass TalentBaseMgrProxy
Removing extraneous RTclass TalentTypeMgrProxy
Removing extraneous RTclass TitleTypeBaseMgrProxy
Removing extraneous RTclass TitleTypeMgrProxy
Removing extraneous RTclass ProductSecurityBaseClass
Removing extraneous RTclass ProductSecurityBaseQuery
Removing extraneous RTclass ProductSecurityQuery
Removing extraneous RTclass ProductSecurityMgrProxy
c4tstdrv > commit
c4tstdrv > exit
Integrate the changes to the workspace, start the build again and this should have cured the problem.
However, its hard to know what the cause of your problem is without seeing the output in the log files.
Good luck.
Mark Carruthers
20th Century Fox
"Forte Consultants" <[email protected]> 01/22/99 08:35am >>>
Hi,
I'm doing application distribution for my application using a fscript
script and am forcing compilation on 2 of my partitions.
This I have been doing from quite sometime successfully. Recently I
developed a new service and plugged it into my application for
deployment.
I'm successfully able to distribute & deploy the interpreted code. But
I'm getting a long list of system errors when I try doing distribution
for compiled code. And I see only one of the .exe generated instead of
two because of which I'm unable to go ahead with installaion. I would
appreciate if anybody let me know why this's happening ?. The following
is the main chunk of this error list.
Thanks in advance.
--Anand Ramaswamy
SYSTEM ERROR: Cannot resolve the distributed reference for an object of
class
(qqlo_Object) named (<Unknown>) for the reasons below.
Class: qqsp_DistAccessException
Error #: [601, 144]
Detected at: qqdo_ProxyMgr::ResolveOutGoingProxy at 10
Error Time: Fri Jan 22 10:44:22
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
"fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
SYSTEM ERROR: Can not initially communicate with the object named
(Unnamed),
which is supposed to be in partition
(32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x616:0x1).
Class: qqsp_DistAccessException
Error #: [601, 140]
Detected at: qqdo_ProxyMgr::CheckAccess at 1
Error Time: Fri Jan 22 10:44:22
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
"fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
SYSTEM ERROR: Attempt to send to unknown destination partition
(32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x616:0x1).
Class: qqsp_DistAccessException
Error #: [601, 102]
Detected at: qqdo_PartitionMgr::SendMsg at 1
Error Time: Fri Jan 22 10:44:22
Distributed method called: qqdo_InternalMessage.<Message> (object
name
Unnamed) from partition "CodeGenerationSvc_cl0_Part1-router",
(partitionId
= 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615.2]) in application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
"fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
SYSTEM ERROR: Partition (32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x616:0x1)
no
longer exists. The process associated with the partition probably
terminated.
Class: qqsp_DistAccessException
Detected at: qqdo_PartitionMgr::CheckStarted at 1
Error Time: Fri Jan 22 10:44:22
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
"fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
SYSTEM ERROR: This method invocation is being retried because the
failures
shown below and the fact that the dialog duration is MESSAGE. This is
try #2.
Class: qqsp_DistAccessException
Error #: [601, 54]
Detected at: qqdo_Message::Failed at 1
Error Time: Fri Jan 22 10:44:19
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
"fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
SYSTEM ERROR: The load balanced router is disabled or has no members.
This
can happen if all of the members terminated or failed.
Class: qqsp_DistAccessException
Error #: [601, 161]
Detected at: qqdo_LbRouter::Route at 1
Error Time: Fri Jan 22 10:44:19
Distributed method called: GenerationMgrProxy.GeneratePartitionCode
(object name
site/codegenerationsvc_cl0/codegenerationsvc_cl0-codegensvc)
from partition "Fscript_cl9_Client", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614.2]) in application
"fscript",
pid 4b81 on node MOOSUP in environment IGTSDENV
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
SYSTEM ERROR: This method invocation is being retried because the
failures
shown below and the fact that the dialog duration is MESSAGE. This is
try #1.
Class: qqsp_DistAccessException
Error #: [601, 54]
Detected at: qqdo_Message::Failed at 1
Error Time: Fri Jan 22 10:44:15
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
"fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
SYSTEM ERROR: Access to a load balanced router member (which is a
service
object) failed for the reasons below.
Class: qqsp_DistAccessException
Error #: [601, 162]
Detected at: qqdo_LbRouter::Route at 2
Error Time: Fri Jan 22 10:44:15
Distributed method called: GenerationMgrProxy.GeneratePartitionCode
(object name
site/codegenerationsvc_cl0/codegenerationsvc_cl0-codegensvc)
from partition "Fscript_cl9_Client", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614.3]) in application
"fscript",
pid 4b81 on node MOOSUP in environment IGTSDENV
Distributed method called: qqlo_Object.<Message> (object name
Unnamed)
from partition "Forte_Executor", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615.12]) in application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
SYSTEM ERROR: Cannot resolve the distributed reference for an object of
class
(qqlo_Object) named (<Unknown>) for the reasons below.
Class: qqsp_DistAccessException
Error #: [601, 144]
Detected at: qqdo_ProxyMgr::ResolveOutGoingProxy at 10
Error Time: Fri Jan 22 10:44:15
Distributed method called: qqlo_Object.<Message> (object name
Unnamed)
from partition "Forte_Executor", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615.12]) in application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
SYSTEM ERROR: This distributed reference was previously invalidated due
to the
reasons below.
Class: qqsp_DistAccessException
Error #: [601, 132]
Detected at: qqdo_ProxyMgr::ResolveOutGoingProxy at 3
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
INFORMATION: The connection to the partner was terminated by the
Communication
Manager for the reasons below.
Class: qqsp_DistAccessException
Detected at: qqdo_PartitionMgr::StopLocation at 1
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
INFORMATION: Network partner closed connection. This usually means the
process at the other end of the wire failed. Please go look there and
find
out why.
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 2
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
INFORMATION: Asynchronous Failure: Recieved a close from the network
partner:
Internet Location - Host: moosup.iroquois.com Port Number: 2504 Dot:
193.1.11.26 %LINKDISCON, network partner disconnected logical link
Event 4
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 1
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
SYSTEM ERROR: This method invocation is being retried because the
failures
shown below and the fact that the dialog duration is MESSAGE. This is
try #1.
Class: qqsp_DistAccessException
Error #: [601, 54]
Detected at: qqdo_Message::Failed at 1
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
INFORMATION: The connection to the partner was terminated by the
Communication
Manager for the reasons below.
Class: qqsp_DistAccessException
Detected at: qqdo_PartitionMgr::StopLocation at 1
Error Time: Fri Jan 22 10:44:15
Distributed method called: qqlo_Object.<Message> (object name
Unnamed)
from partition "Forte_Executor", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615.12]) in application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
INFORMATION: Network partner closed connection. This usually means the
process at the other end of the wire failed. Please go look there and
find
out why.
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 2
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
INFORMATION: Asynchronous Failure: Recieved a close from the network
partner:
Internet Location - Host: moosup.iroquois.com Port Number: 2504 Dot:
193.1.11.26 %LINKDISCON, network partner disconnected logical link
Event 4
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 1
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Hi,
If this INCLUDE is in a function group go the MAIN program and activate from there.
Can you list out the include name?
a®

Similar Messages

Error during distribution for compiled codegeneration

Hi,
I'm doing application distribution for my application using a fscript
script and am forcing compilation on 2 of my partitions.
This I have been doing from quite sometime successfully. Recently I
developed a new service and plugged it into my application for
deployment.
I'm successfully able to distribute & deploy the interpreted code. But
I'm getting a long list of system errors when I try doing distribution
for compiled code. And I see only one of the .exe generated instead of
two because of which I'm unable to go ahead with installaion. I would
appreciate if anybody let me know why this's happening ?. The following
is the main chunk of this error list.
Thanks in advance.
--Anand Ramaswamy
SYSTEM ERROR: Cannot resolve the distributed reference for an object of
class
(qqlo_Object) named (<Unknown>) for the reasons below.
Class: qqsp_DistAccessException
Error #: [601, 144]
Detected at: qqdo_ProxyMgr::ResolveOutGoingProxy at 10
Error Time: Fri Jan 22 10:44:22
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
"fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
SYSTEM ERROR: Can not initially communicate with the object named
(Unnamed),
which is supposed to be in partition
(32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x616:0x1).
Class: qqsp_DistAccessException
Error #: [601, 140]
Detected at: qqdo_ProxyMgr::CheckAccess at 1
Error Time: Fri Jan 22 10:44:22
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
"fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
SYSTEM ERROR: Attempt to send to unknown destination partition
(32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x616:0x1).
Class: qqsp_DistAccessException
Error #: [601, 102]
Detected at: qqdo_PartitionMgr::SendMsg at 1
Error Time: Fri Jan 22 10:44:22
Distributed method called: qqdo_InternalMessage.<Message> (object
name
Unnamed) from partition "CodeGenerationSvc_cl0_Part1-router",
(partitionId
= 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615.2]) in application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
"fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
SYSTEM ERROR: Partition (32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x616:0x1)
no
longer exists. The process associated with the partition probably
terminated.
Class: qqsp_DistAccessException
Detected at: qqdo_PartitionMgr::CheckStarted at 1
Error Time: Fri Jan 22 10:44:22
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
"fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
SYSTEM ERROR: This method invocation is being retried because the
failures
shown below and the fact that the dialog duration is MESSAGE. This is
try #2.
Class: qqsp_DistAccessException
Error #: [601, 54]
Detected at: qqdo_Message::Failed at 1
Error Time: Fri Jan 22 10:44:19
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
"fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
SYSTEM ERROR: The load balanced router is disabled or has no members.
This
can happen if all of the members terminated or failed.
Class: qqsp_DistAccessException
Error #: [601, 161]
Detected at: qqdo_LbRouter::Route at 1
Error Time: Fri Jan 22 10:44:19
Distributed method called: GenerationMgrProxy.GeneratePartitionCode
(object name
site/codegenerationsvc_cl0/codegenerationsvc_cl0-codegensvc)
from partition "Fscript_cl9_Client", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614.2]) in application
"fscript",
pid 4b81 on node MOOSUP in environment IGTSDENV
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
SYSTEM ERROR: This method invocation is being retried because the
failures
shown below and the fact that the dialog duration is MESSAGE. This is
try #1.
Class: qqsp_DistAccessException
Error #: [601, 54]
Detected at: qqdo_Message::Failed at 1
Error Time: Fri Jan 22 10:44:15
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
"fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
SYSTEM ERROR: Access to a load balanced router member (which is a
service
object) failed for the reasons below.
Class: qqsp_DistAccessException
Error #: [601, 162]
Detected at: qqdo_LbRouter::Route at 2
Error Time: Fri Jan 22 10:44:15
Distributed method called: GenerationMgrProxy.GeneratePartitionCode
(object name
site/codegenerationsvc_cl0/codegenerationsvc_cl0-codegensvc)
from partition "Fscript_cl9_Client", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614.3]) in application
"fscript",
pid 4b81 on node MOOSUP in environment IGTSDENV
Distributed method called: qqlo_Object.<Message> (object name
Unnamed)
from partition "Forte_Executor", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615.12]) in application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
SYSTEM ERROR: Cannot resolve the distributed reference for an object of
class
(qqlo_Object) named (<Unknown>) for the reasons below.
Class: qqsp_DistAccessException
Error #: [601, 144]
Detected at: qqdo_ProxyMgr::ResolveOutGoingProxy at 10
Error Time: Fri Jan 22 10:44:15
Distributed method called: qqlo_Object.<Message> (object name
Unnamed)
from partition "Forte_Executor", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615.12]) in application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
SYSTEM ERROR: This distributed reference was previously invalidated due
to the
reasons below.
Class: qqsp_DistAccessException
Error #: [601, 132]
Detected at: qqdo_ProxyMgr::ResolveOutGoingProxy at 3
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
INFORMATION: The connection to the partner was terminated by the
Communication
Manager for the reasons below.
Class: qqsp_DistAccessException
Detected at: qqdo_PartitionMgr::StopLocation at 1
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
INFORMATION: Network partner closed connection. This usually means the
process at the other end of the wire failed. Please go look there and
find
out why.
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 2
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
INFORMATION: Asynchronous Failure: Recieved a close from the network
partner:
Internet Location - Host: moosup.iroquois.com Port Number: 2504 Dot:
193.1.11.26 %LINKDISCON, network partner disconnected logical link
Event 4
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 1
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
SYSTEM ERROR: This method invocation is being retried because the
failures
shown below and the fact that the dialog duration is MESSAGE. This is
try #1.
Class: qqsp_DistAccessException
Error #: [601, 54]
Detected at: qqdo_Message::Failed at 1
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
INFORMATION: The connection to the partner was terminated by the
Communication
Manager for the reasons below.
Class: qqsp_DistAccessException
Detected at: qqdo_PartitionMgr::StopLocation at 1
Error Time: Fri Jan 22 10:44:15
Distributed method called: qqlo_Object.<Message> (object name
Unnamed)
from partition "Forte_Executor", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615.12]) in application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
INFORMATION: Network partner closed connection. This usually means the
process at the other end of the wire failed. Please go look there and
find
out why.
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 2
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
INFORMATION: Asynchronous Failure: Recieved a close from the network
partner:
Internet Location - Host: moosup.iroquois.com Port Number: 2504 Dot:
193.1.11.26 %LINKDISCON, network partner disconnected logical link
Event 4
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 1
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

I was able to resolve this. The error seems to be very misleading.
Actual problem was with the configuration of Accounting Codes and Valuation areas. The currency of the company code was wrongly mentioned for the US GAAP valuation area. Instead of putting in the company code currency which is AUD for us they put in the Group currency which is USD.
Thanks,
Raj

Error during MIRO for tax code .

Dear All ,
User is doing MIRO but an error comes as " Tax code V0 does not exist in TAXINN " , here i need to tell u that what had happened that in P.O the material is not charged with any tax , so user have given tax code as V0 , but he had forgotten to maintain cond for BED non cenvatable % so he had made the cond. record in FV11 , Here my querry is that during MIRO the tax code V0 without cond record gives error from where the system is not capable to fetch the data ?
OR is there any check so that in such cond. the error should be like this " No cond record is maintained for V0." instaed of
" Tax code V0 does not existsin TAXINN "
Rgds
sap12

U need the user should assign tax code V0 for non-taxable materials.
Error what it giving is correct. U should assign this V0 to ur tax Procedure TAXINN.
Path to Assign
Spro - IMG - Financial Accounting(New) - FA Global settings - Tax on Sales/ Purchase - Calculation - Taxcodes for Tax-Excempt Sales.
Procedure - TaxCode - Reason
If ur not able to solve the problem, Send me ur requrement clearly.
Subramanian.R

Error during reading T001G (Return code

Hi experts,
In vl33n ( Inbound Delivery ) , Extras > Delivery Output >Select o/p type and ,
when I press Processing Log for a Inbound Delivery Output I get Following Errors
"Error during reading TVKO (Return Code 4)"
Error during reading T001G (Return code 4
What should be done?
Thanks so much in advance!

Hello Kaustubh,
What is the processing mode of the output type. If processing type is any of the below :-
1. Print - Set a break-point in the driver program and click on print preivew.
2.EDI - Trigger output type and change processing mode to periodic(click on futher data tab) .
Run RSNAST00 program with output type and inbound delivery as input parameters.
Debug the driver program to know the actual root cause
Thanks

Error during reading T001G (Return code 4

Hi experts,
In vl33n ( Inbound Delivery ) , Extras > Delivery Output >Select o/p type and ,
when I press Processing Log for a Inbound Delivery Output I get Following Errors
"Error during reading TVKO (Return Code 4)"
Error during reading T001G (Return code 4
What should be done?
Thanks so much in advance!

Hello Kaustubh,
What is the processing mode of the output type. If processing type is any of the below :-
1. Print - Set a break-point in the driver program and click on print preivew.
2.EDI - Trigger output type and change processing mode to periodic(click on futher data tab) .
Run RSNAST00 program with output type and inbound delivery as input parameters.
Debug the driver program to know the actual root cause
Thanks

Error during search for WM movement type (911)

Hi gurus,
I am using tx code MB1A (Mov type 911). When I try to save it I received the following error message:
"Error during search for WM movement type (911)"
any idea of this message?
Thanks in advance

The probable reason is that the storage location is Warehouse Managed and the system is not able to find a WM movement corresponding to the IM movement in the warehouse. Please check if the IM Movement type 911 mapped to a WM movement type for the warehouse in configuration?
Lakshman

Compiler Code Generation API

I would like to ask if you guys could make a Compiler Code Generation API. This would allow developers who would like to fine-tune details you guys probably don't have time to do, for projects we think its important on. Specifically with [Bindable] and {} code generation.
I would like to be able, and many others I'm sure, to turn Binding on/off (conditional binding), and add more complicated expressions, but that's currently impossible, unless I rewrote the core UIComponent and everything. Or unless I had access to the generated code through a nice API which shouldn't take you guys long at all: you already are generating lots of code and have templates for it, I would just like to ask for easy access to those templates.
Please let me know what you think. Thanks a lot for your time.
Lance

It's something we've thought about but it's not a high enough priority right now. Certainly a feature that folks could think about implementing on their own and contributing back though. It tends to be more complicated than you'd think though
Matt

Error during search for WM movement type (652 1 L )

Hi Guys,
For return order,we have created return delivery and PGR,Material Doc was created in the background TR and TO also created.Confirmed the TO.
Now we trying to reverse the PGR and Delivery from Transaction VL09,we are getting the following error.
Error during search for WM movement type (652 1 L )
Please reply ASAP,it's very urgent
Regards,
Kiran

insert this entry, it will work.
regards,
Yu

Error during analysis of source code

Hi,
I am trying to add a field to the search criteria and i have followed the steps as given in the cook book. I am stuck at a point where on trying to add the custom field to the existing code i get an error message - "Error during analysis of Source code". This pop up comes at the end of the wizard.
I also tried to create a new context node but at the end of the wizard i get the pop up and the same message inside.
I searched in SDN and found out that this error could occur if the context node class is not active. In my case, all the three classes : Controller , context and context node class are active.
Could some one throw some light as to why this error message occurs?
Regards,
Venkat

Hi Experts,
I'm also getting a similar error but at the time of creating a new event. All the classes are active without errors.
How do we resolve this.
Appreciate your help.
Regards,
Sandeep

ICal yields "Error during PUT for mailto:valid@email: iMIP request failed"

Hello,
I'm trying to bring up an iCal server (using Mac OS X Lion 10.7.3 Server on a Mac Mini). The basic configuration runs fine. But when I tried to enable eMail invitations, I got stuck with those messages in the error log:
[twistedcaldav.scheduling.imip#error] Could not do server-to-imip request : <twistedcaldav.scheduling.imip.ScheduleViaIMip object at 0x10075e5d0> User timeout caused connection failure.
[twistedcaldav.scheduling.scheduler.ScheduleResponseQueue#error] Error during PUT for mailto:valid@email: iMIP request failed
My configuration settings:
calendar:Scheduling:CalDAV:EmailDomain = ""
calendar:Scheduling:CalDAV:HTTPDomain = ""
calendar:Scheduling:CalDAV:AddressPatterns = _empty_array
calendar:Scheduling:iMIP:Sending:Server = "valid.mail.server"
calendar:Scheduling:iMIP:Sending:UseSSL = no
calendar:Scheduling:iMIP:Sending:Username = "valid@email"
calendar:Scheduling:iMIP:Sending:Address = "valid@email"
calendar:Scheduling:iMIP:Sending:Password = "safe_password"
calendar:Scheduling:iMIP:Sending:Port = 25
calendar:Scheduling:iMIP:Enabled = yes
calendar:Scheduling:iMIP:MailGatewayPort = 62310
calendar:Scheduling:iMIP:Receiving:Server = "valid.mail.server"
calendar:Scheduling:iMIP:Receiving:UseSSL = yes
calendar:Scheduling:iMIP:Receiving:Username = "valid_email"
calendar:Scheduling:iMIP:Receiving:PollingSeconds = 30
calendar:Scheduling:iMIP:Receiving:Type = "imap"
calendar:Scheduling:iMIP:Receiving:Password = "safe_password"
calendar:Scheduling:iMIP:Receiving:Port = 993
calendar:Scheduling:iMIP:AddressPatterns:_array_index:0 = "mailto:.*"
calendar:Scheduling:iMIP:MailGatewayServer = "valid.mail.server"
calendar:Scheduling:iSchedule:Enabled = no
calendar:Scheduling:iSchedule:Servers = "servertoserver.xml"
calendar:Scheduling:iSchedule:AddressPatterns = _empty_array
It does not even try to connect to the given smtp server. How do I proceed?

I dug into the sources, and am now smarter
the above settings are invalid, because of the gateway (this has to be iCal itself):
calendar:Scheduling:iMIP:MailGatewayServer = "localhost"
Now the IMAP server is being asked, but now I have the next problem:
[mailgateway] 2012-03-27 11:14:37+0200 [IMAP4DownloadProtocol,client] [twistedcaldav.mail.IMAP4DownloadFactory#debug] Scheduling next IMAP4 poll
[mailgateway] 2012-03-27 11:15:07+0200 [IMAP4DownloadProtocol,client] [twistedcaldav.mail.IMAP4DownloadProtocol#debug] RECEIVED: * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE AUTH=PLAIN AUTH=LOGIN] Dovecot ready.
[mailgateway] 2012-03-27 11:15:07+0200 [IMAP4DownloadProtocol,client] [twistedcaldav.mail.IMAP4DownloadProtocol#debug] IMAP servergreeting
[mailgateway] 2012-03-27 11:15:07+0200 [IMAP4DownloadProtocol,client] [twistedcaldav.mail.IMAP4DownloadProtocol#debug] SENDING: 0001 AUTHENTICATE PLAIN
[mailgateway] 2012-03-27 11:15:07+0200 [IMAP4DownloadProtocol,client] [twistedcaldav.mail.IMAP4DownloadProtocol#debug] RECEIVED: +
[mailgateway] 2012-03-27 11:15:07+0200 [IMAP4DownloadProtocol,client] [twistedcaldav.mail.IMAP4DownloadProtocol#debug] SENDING: 1GNhbEwhZHNwZXJ0LmRlAFlpZXE5YW==
[mailgateway] 2012-03-27 11:15:09+0200 [IMAP4DownloadProtocol,client] [twistedcaldav.mail.IMAP4DownloadProtocol#debug] RECEIVED: 0001 NO [AUTHENTICATIONFAILED] Authentication failed.
[mailgateway] 2012-03-27 11:15:09+0200 [IMAP4DownloadProtocol,client] [twistedcaldav.mail.IMAP4DownloadProtocol#debug] IMAP authenticate failed for valid@email, trying login
[mailgateway] 2012-03-27 11:15:09+0200 [IMAP4DownloadProtocol,client] [twistedcaldav.mail.IMAP4DownloadProtocol#debug] SENDING: 0002 LOGIN "valid@email" "valid_password"
[mailgateway] 2012-03-27 11:15:16+0200 [IMAP4DownloadProtocol,client] [twistedcaldav.mail.IMAP4DownloadProtocol#debug] RECEIVED: 0002 NO [AUTHENTICATIONFAILED] Authentication failed.
[mailgateway] 2012-03-27 11:15:16+0200 [IMAP4DownloadProtocol,client] [twistedcaldav.mail.IMAP4DownloadProtocol#error] IMAP login failed for valid@email
[mailgateway] 2012-03-27 11:15:16+0200 [IMAP4DownloadProtocol,client] [twistedcaldav.mail.IMAP4DownloadFactory#debug] IMAP factory connection lost

Error during search for WM movement type (999 E )

Dear ALL,
I am try to reverse transaction 313. i use movement 314 but there is error message during creating delivery. the message is
"Error during search for WM movement type (999 E )"
Could someone help me please ?
Thanks & Best regrads,
Saiful arif

Hi,
Please check the reference movement type in table V_156S_WM for inventory movement 314 and for your case of qty and value update indicators
For qty updation indicator checked, you will have a reference movement type 3XX and not equal to 999
for qty updation indicator not checked, you will have reference movement type 999
qty updation indicator checked means stock / quantity controlled in which case
check your set up in transaction OMLR , reference movement 3XX from above table should be assigned to a proper WM movement type 3YY
then check for WM movement 3YY in Transaction OMLJ which should have source storage type maintained.
qty updation indicator not checked means stock / quantity not controlled or updated in which case reference movement type is 999 which has no maitenance in OMLR, moreover it is no stock / qty and no stock transfers situation
If 3XX happens to be 999 in your case, then check for 3YY movement in OMLR and check for storage type determination for 3YY in OMLJ
Please note 999 as WM movement is used for manual transfer within warehouse but not for warehouse movements resulting from IM.
Hope this should solve your problem.
Regds
Shrihari

Error during search for movement type (953)

Hi All,
When I'm trying to issue goods to an internal order, I get the below error
Error during search for movement type (953)
The explanation is as follows
The movement type of the warehouse system and certain parameters are assigned to each movement type of the inventory management system
In this case no movement type of the warehouse management system was assigned to the inventory management movement type used by the paramaters enclosed in parantheses in the eror message.
Is there some config missing in this case?? Please let me know how to overcome this error
Regards,
Ashwin

when you create new movement types in MM, then you certainly have to create WM movement types too, if you want use the new movement types to post at a warehouse managed storage location.
This customizing needs to be done in IMG > LE > WM > Activities > transfers > define movement types
and
IMG > LE > WM > interfaces > inventory management > define movement types

WM-Error during search for WM movement type (261 )

HI FRIENDS
I HAVE THE ERROR DURING GOODS ISSUE FOR PRODUCTION ORDER...
PLS SUGGEST ME TO SOLVE THIS ISSUE
Error during search for WM movement type (261 )
Message no. L9 005
Diagnosis
A movement type of the Warehouse Management system and certain parameters are assigned to each movement type of the Inventory Management system.
In this case, no movement type of the Warehouse Management system was assigned to the Inventory Management movement type used by the parameters enclosed in parentheses in the error message.
Procedure
Contact your system administrator about this error. Note down the parameters in the error message and the situation that caused the error.
WIHT REGARDS
DINESH

Hi,
The IM and WM linkage may not be proper for the movement type. Maintain an entry for your warehouse with movement type 261 and Movment Indicator l combination in transaction OMLR. In the "Assign WM Movement Type References to IM Movement Types" section (button), change the "Reference Movement Type WM" to 261 (to match "Reference Mvmt Type" under button LE-WM "Interface to Inventory Management")
And also .....
Check in IMG Path - Enterprise Structure --> Assignment --> Logistis Execution --> Assign warehouse number to plant/storage location. I hope this will help you. Thanking you.

SAP_BASIS IMPORT_PROPER Error during SPAM for CRM Upgrade

Hi All,
During SPAM IMPORT_PROPER for component SAP_BASIS, encountered error. Checking the Import Logs of the queue, we see error logs in Activate inactive runtime objects. Sample message below.
May we ask how to fix the error for us to be able to continue the upgrade? Thanks.
   Activation of sample nametabs with appended fields
   06:17:30: Retcode 512: error in DDL statement for ALCCMCUSTP                     - repea
   t
   Error -204-SQL0204N when executing ADD-FIELD of is an undefined name. SQLSTA
   Error in DDL statement for when executing ADD-FIELD of
           (dummy, do not translate)
   No DDL commands found for activation of ALCCMCUSTP
   06:17:42: Retcode 512: error in DDL statement for ALCCMCUSTV                     - repea
   t
   Error -204-SQL0204N when executing ADD-FIELD of is an undefined name. SQLSTA
   Error in DDL statement for when executing ADD-FIELD of
           (dummy, do not translate)
   No DDL commands found for activation of ALCCMCUSTV
   06:17:55: Retcode 512: error in DDL statement for ARC_DESTR_VETO                 - repea
   t
   Error -204-SQL0204N when executing ADD-FIELD of is an undefined name. SQLSTA
   Error in DDL statement for when executing ADD-FIELD of
           (dummy, do not translate)
   No DDL commands found for activation of ARC_DESTR_VETO
   06:18:07: Retcode 512: error in DDL statement for DB6_OPTPROFILE                 - repea
   t
   Error -204-SQL0204N when executing ADD-FIELD of is an undefined name. SQLSTA
   Error in DDL statement for when executing ADD-FIELD of
           (dummy, do not translate)
   No DDL commands found for activation of DB6_OPTPROFILE
   06:18:19: Retcode 512: error in DDL statement for FDT_TRACE_0200                 - repea
   t
   Error -204-SQL0204N when executing ADD-FIELD of is an undefined name. SQLSTA
   Error in DDL statement for when executing ADD-FIELD of
           (dummy, do not translate)
   No DDL commands found for activation of FDT_TRACE_0200
   06:18:31: Retcode 512: error in DDL statement for FDT_TRACE_0201                 - repea
   t
   Error -204-SQL0204N when executing ADD-FIELD of is an undefined name. SQLSTA
   Error in DDL statement for when executing ADD-FIELD of
           (dummy, do not translate)
   No DDL commands found for activation of FDT_TRACE_0201
   06:18:43: Retcode 512: error in DDL statement for GE071KF_OLD_NT                 - repea
   t
   Error -204-SQL0204N when executing ADD-FIELD of is an undefined name. SQLSTA
   Error in DDL statement for when executing ADD-FIELD of
           (dummy, do not translate)
   No DDL commands found for activation of GE071KF_OLD_NT
   06:18:55: Retcode 512: error in DDL statement for GTABKEYEXC20                   - repea
   t
   Error -204-SQL0204N when executing ADD-FIELD of is an undefined name. SQLSTA
   Error in DDL statement for when executing ADD-FIELD of
           (dummy, do not translate)
   No DDL commands found for activation of GTABKEYEXC20
   06:19:07: Retcode 512: error in DDL statement for GTABKEY_CASCADE                - repea
   t
   Error -204-SQL0204N when executing ADD-FIELD of is an undefined name. SQLSTA
   Error in DDL statement for when executing ADD-FIELD of
           (dummy, do not translate)
   No DDL commands found for activation of GTABKEY_CASCADE
   06:19:19: Retcode 512: error in DDL statement for GTABKEY_COMPEXCL               - repea
   t
   Error -204-SQL0204N when executing ADD-FIELD of is an undefined name. SQLSTA
   Error in DDL statement for when executing ADD-FIELD of
           (dummy, do not translate)
   No DDL commands found for activation of GTABKEY_COMPEXCL
   Error -204-SQL0204N when executing ADD-FIELD of is an undefined name. SQLSTA
   Error in DDL statement for when executing ADD-FIELD of
           (dummy, do not translate)
   No DDL commands found for activation of GTABKEY_COMPSETS
   Error -204-SQL0204N when executing ADD-FIELD of is an undefined name. SQLSTA
   Error in DDL statement for when executing ADD-FIELD of
           (dummy, do not translate)
   No DDL commands found for activation of GTABKEY_C_SYS
   Error -204-SQL0204N when executing ADD-FIELD of is an undefined name. SQLSTA
   Error in DDL statement for when executing ADD-FIELD of
           (dummy, do not translate)
   No DDL commands found for activation of GTABKEY_EXT
   Error -204-SQL0204N when executing ADD-FIELD of is an undefined name. SQLS
   Error in DDL statement for when executing ADD-FIELD of
           (dummy, do not translate)
   No DDL commands found for activation of IACXU
   Error -204-SQL0204N when executing ADD-FIELD of is an undefined name. SQLS
   Error in DDL statement for when executing ADD-FIELD of
           (dummy, do not translate)
   No DDL commands found for activation of IACXUT
   Error -204-SQL0204N when executing ADD-FIELD of is an undefined name. SQLS
   Error in DDL statement for when executing ADD-FIELD of
           (dummy, do not translate)
   No DDL commands found for activation of IACXU_C1
   Error -204-SQL0204N when executing ADD-FIELD of is an undefined name. SQLSTA
   Error in DDL statement for when executing ADD-FIELD of
           (dummy, do not translate)
   No DDL commands found for activation of IACXU_C_TEMP
   Error -204-SQL0204N when executing ADD-FIELD of is an undefined name. SQLSTA
   Error in DDL statement for when executing ADD-FIELD of
           (dummy, do not translate)
   No DDL commands found for activation of STORE_HELP
   Error -204-SQL0204N when executing ADD-FIELD of is an undefined name. SQLSTA
   Error in DDL statement for when executing ADD-FIELD of
           (dummy, do not translate)
   No DDL commands found for activation of STORE_LINK_IND
   Error -204-SQL0204N when executing ADD-FIELD of is an undefined name. SQLSTA
   Error in DDL statement for when executing ADD-FIELD of
           (dummy, do not translate)
   No DDL commands found for activation of SWWOUTBOX
   Error -204-SQL0204N when executing ADD-FIELD of is an undefined name. SQLSTA
   Error in DDL statement for when executing ADD-FIELD of
           (dummy, do not translate)
   No DDL commands found for activation of SWWWITEXT
           21 shadow nametab activations resulted in errors
   Begin: Activation of shadow nametabs with DDL (2014/03/19 06:17:30)
   End:    Activation of shadow nametabs with DDL (2014/03/19 06:19:31)
   Begin: Activation of shadow nametabs with DDL (2014/03/19 06:19:31)
           (dummy, do not translate)
Regards,
Philip

Hi Philip,
Could you please check the below SAP Note. It is a composite notes which has listing of various errors during upgrade
822379 - Known problems with Support Packages in SAP NW 7.0x AS ABAP
Hope this will be useful
Thanks and Regards
DJ

Error when run the compiled code

I have code below,
import java.sql.*;
public class testmysql{
     public static void main(String args[]){
          Connection conn = null;
try{
String userName = "root";
String password = "password";
String url = "jdbc:mysql://localhost:3307/ectol_db";
Class.forName ("com.mysql.jdbc.Driver").newInstance ();
conn = DriverManager.getConnection (url, userName, password);
System.out.println ("Database connection established");
}catch (Exception e) {
          e.printStackTrace();
System.err.println ("Cannot connect to database server");
}finally{
if (conn != null){
try{
conn.close ();
System.out.println ("Database connection terminated");
}catch (Exception e) {
     e.printStackTrace();
     /* ignore close errors */
and i have the mysql-connector-5.0.6.jar
I able to compile code with javac testmysql.java command
However, when i try to run the code with java testmysql command, it prompt me error below
java.lang.ClassNotFoundException: com.mysql.jdbc.Driver
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:268)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:164)
at testmysql.main(testmysql.java:11)
Cannot connect to database server
Anyone can help?

ccwoon80 wrote:
Actually, the jar and class file was in the same path...
Thus, what the correct command i need to run the my code?Then your classpath would be .;mysql.jar (or whatever the heck the name of the connector was).
So java -cp .;mysql.jar foo.bar.MyClass

Error during distribution for compiled code generation-Reply

Similar Messages

Maybe you are looking for