Call transaction help

Hi ,
I am writing a inbound function module to create a training records.
I am writing a call transaction for the transaction PV10 ,PV08 and PV12.
after complition of the PV10 business event will be created,
I need to pass the business event to PV08 transaction,
please help me how to sort out the problem,is the chance export and import concept ,how to get the business event to pv08 transaction?
please let me know if you need more information .
from
Nagaraju vuppala

the call for BTE is like this
OPEN_FI_PERFORM_00001160_P
regards
Prabhu

Similar Messages

CALL Transaction in background not working pls help URGENT

hi i have writtin a bdc program which uses CALL TRSANCTION everything is working in foreground.
if i schedule the program in background the call transaction does not work. any idea why?????????
pls help its urgent

hi
good
have you checked in the debug mode, if you have checked in the debug mode check wheather it is giving any error before data is displaying in the screen, if any error is displaying as a message than check that error why it is coming there.
If no error is coming than check your flow of the bdc screen in the debug mode , there must be some prob, so that it is not working in the background.
thanks
mrutyun^

VALUES not getting passed in t.code 'FMY3' VIA call transaction 'FMY3'

hi guru's,
i have created a ALV report for funds precommitment,when i click the document number,the respective document is not opening
i have coded like this
IF selfield-value IS NOT INITIAL.
        READ TABLE final INDEX selfield-tabindex.
        SET PARAMETER ID: 'KBL' FIELD final-belnr,
                          'KBP' FIELD final-blpos.
        CALL TRANSACTION 'FMY3' AND SKIP FIRST SCREEN.
      ENDIF.
the transaction is called,but with empty value in the field and the document is not opening....please help me with this regard...
    thanks in advance,
regards,
Balaji.S

Hello Venkat.O,
i have a similar problem with the overwrite of the memory ID, when calling transaction FMY3. In the code block you mentioned, the system gets the right value from the memory ID, that i've set before calling the transaction. But i found that after that the system runs in the include LFMFRO01, the code
MODULE init_suppress OUTPUT.
IF status2 = st2_app.                "/Genehmigen/Ablehnen
Lesen aus Memory: wird in WF-Methode 'APPROVE' gefüllt
    IMPORT wfdata TO g_f_wfdata FROM MEMORY ID con_memid_wf.
    IF NOT g_f_wfdata-belnr IS INITIAL.
      IF g_f_wfdata-blpos = space.
        g_f_wfdata-blpos = con_initial_blpos.
      ENDIF.
      kbld-belnr = g_f_wfdata-belnr.
and here the system gets the memory of the last document created and overwrites the selecion-screen field KBLD-BELNR with that value. And the value i had stored in the parameter ID 'MRV', and that the system gets it right in the code you show, is overwritten..
This seems like a bug from SAP, don't you think?
This way the system will always show the last doc. when calling transaction, after setting a parameter ID..

Code for Hot spot in ALV report to call transaction

Hi,
I hv never use hot spot to link as a call transaction can u give the link or code how to make hot spot on a particular fields i am working on a ALV report in that report in the belnr coloumn when user click on belnr i want to call FB03 transaction ref. to that belnr number and fisacl year.
regards,
zafar

Hi,
In the fieldcatalog you will have to write the hotspot as shown below,
   wa_fieldcat-hotspot   = 'X'.
APPEND wa_fieldcat TO it_fieldcat.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
      EXPORTING
        i_callback_program       = sy-repid
        i_callback_user_command = 'USER_COMMAND'"----> this is important
     i_callback_pf_status_set = 'PFSTATUS'
        it_fieldcat              = it_fieldcat
        is_layout                = it_layout
     it_event_exit            = it_eventexit
     i_screen_start_column    = 10
     i_screen_start_line      = 20
     i_screen_end_column      = 70
     i_screen_end_line        = 45
        i_grid_title             = 'Customer-Order Details'
      TABLES
        t_outtab                 = it_data.
then you will have to catch the user command as follows,
FORM user_command USING r_ucomm TYPE sy-ucomm
                        rs_selfield TYPE slis_selfield.
DATA: alv_vbeln TYPE vbeln,
        mess_text(30) TYPE c,
        txt_vbeln(10) TYPE c.
*User clicks a Order No. in ALV it passed to the following transaction.
CASE r_ucomm.
    WHEN '&IC1'.
      READ TABLE it_data INDEX rs_selfield-tabindex INTO wa_data.
      alv_vbeln = wa_data-vbeln..
      IF sy-subrc = 0.
        CLEAR: mess_text, txt_vbeln.
        SUBMIT zprogram
         WITH pr_vbeln = alv_vbeln AND RETURN.
put your call transaction logic here
      ENDIF.
ENDCASE.
ENDFORM.                    "user_command
Hope it helps you,
Regards,
Abhijit G. Borkar

Passing selection screen values to the next report using CALL TRANSACTION

Hi experts,
I have 2 reports. In the first report i have the 3 input fields in the first report, how do i pass the values to the next report which is transaction: ZKKBC_PKO_2.
I want to display in the next report the selections that the user previously selected.
First report:
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: COMP     LIKE AFRU-WERKS OBLIGATORY MODIF ID s1.
PARAMETERS: PERIOD   LIKE COEP-PERIO OBLIGATORY MODIF ID s1.
PARAMETERS: YEAR     LIKE COEP-GJAHR OBLIGATORY MODIF ID s1.
SELECTION-SCREEN END OF BLOCK b1.
CALL TRANSACTION 'ZKKBC_PKO_2'.
Anyone can help me?
Thanks,
Lawrence

Hi experts,
What i did is this:
Using SET PARAMETER
in the first report
SET PARAMETER ID 'WRK' FIELD COMP.
SET PARAMETER ID 'VPE' FIELD PERIOD.
SET PARAMETER ID 'GJR' FIELD YEAR.
CALL TRANSACTION 'ZKKBC_PKO_2'.
Second Report
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001.
PARAMETERS: WRK     LIKE AFRU-WERKS.
PARAMETERS: VPE     LIKE COEP-PERIO.
PARAMETERS: GJR     LIKE COEP-GJAHR.
SELECTION-SCREEN END OF BLOCK blk1.
Using SUBMIT
First Report
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: COMP     LIKE AFRU-WERKS OBLIGATORY MODIF ID s1.
PARAMETERS: PERIOD   LIKE COEP-PERIO OBLIGATORY MODIF ID s1.
PARAMETERS: YEAR     LIKE COEP-GJAHR OBLIGATORY MODIF ID s1.
SELECTION-SCREEN END OF BLOCK b1.
SUBMIT ZCO_PRDCOST_ACTUAL_2 VIA SELECTION-SCREEN USING SELECTION-SETS OF PROGRAM 'ZCO_PRDCOST_ACTUAL_1' AND RETURN.
Second Report:
GET PARAMETER ID 'WRK' FIELD comp.
GET PARAMETER ID 'VPE' FIELD COEP-PERIO.
GET PARAMETER ID 'GJR' FIELD YEAR.
Either this 2 ways i still cannot get the first report selection values on the 2nd report. Can someone help me see if my codes is correcT?

Want to call transactions from ALV list output

Hi Guru's,
I have a report which displays Open PR's, open PO's n their details with respect to material. wat i want to do is call transactions from this out put i.e i want a interactive output. if i click on particular PR i want the system to call that PR screen. how can i do this?? Plz help.

REFER THIS
EXPORTING
I_INTERFACE_CHECK              = ' '
I_BYPASSING_BUFFER             =
I_BUFFER_ACTIVE                = ' '
I_CALLBACK_PROGRAM             = ' '
I_CALLBACK_PF_STATUS_SET       = ' '
I_CALLBACK_USER_COMMAND        = 'USER_COMMAND '
I_STRUCTURE_NAME               =
IS_LAYOUT                      =
IT_FIELDCAT                    =
IT_EXCLUDING                   =
IT_SPECIAL_GROUPS              =
IT_SORT                        =
IT_FILTER                      =
IS_SEL_HIDE                    =
I_DEFAULT                      = 'X'
I_SAVE                         = ' '
IS_VARIANT                     =
IT_EVENTS                      =
IT_EVENT_EXIT                  =
IS_PRINT                       =
IS_REPREP_ID                   =
I_SCREEN_START_COLUMN          = 0
I_SCREEN_START_LINE            = 0
I_SCREEN_END_COLUMN            = 0
I_SCREEN_END_LINE              = 0
IR_SALV_LIST_ADAPTER           =
IT_EXCEPT_QINFO                =
I_SUPPRESS_EMPTY_DATA          = ABAP_FALSE
IMPORTING
E_EXIT_CAUSED_BY_CALLER        =
ES_EXIT_CAUSED_BY_USER         =
EXCEPTIONS
PROGRAM_ERROR                  = 1
OTHERS                         = 2
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
TABLES
    T_OUTTAB                       =
IF SY-SUBRC <> 0.
ENDIF.
AND THEN
                 rs_lineinfo type slis_lineinfo.
FORM user_command5 USING r_ucomm LIKE sy-ucomm
                  rs_selfield TYPE slis_selfield.
data : lv_date type char4.
CLEAR : LV_DATE .
CASE r_ucomm.
WHEN '&IC1'.
      IF rs_selfield-fieldname = 'BELNR'.
    read table it_e into wa_e index rs_selfield-tabindex.
    if sy-subrc = 0.
    lv_date = wa_e-budat(4).
    endif.
    SET PARAMETER ID 'BLN' FIELD rs_selfield-value.
    SET PARAMETER ID 'BUK' FIELD s_bukrs-low.
    SET PARAMETER ID 'GJR' FIELD lv_date.
    call TRANsaction 'FB03' AND SKIP FIRST SCREEN.
    endif.
    ENDCASE.
ENDFORM. "user_comm

Issue in background job for call transaction

Dear All,
I am facing a strange issue with call transaction. I need to add some Purchase requisitons in the APO using Call transactionmethod. It is working fine In All screen mode and No Screen Mode. But when I schedule the program in BAckground processing it is not wokring fine. It is not creating any Purchase requisitioins. When I debug the background Job it is creating Purchase requisitions.
Please find the code below
    DATA: l_wa_params TYPE ctu_params.
    l_wa_params-dismode = l_c_mode.
    l_wa_params-updmode = 'A'.
    l_wa_params-defsize = 'X'.
    l_wa_params-racommit = 'X'.
    CALL TRANSACTION '/SAPAPO/RRP3' USING fp_i_bdcdata OPTIONS FROM l_wa_params
                                        MESSAGES INTO l_i_bdcmsgcoll.

Hi,
I have exactly the same problem with transaction /SAPAPO/RRP5.
Thanks in advance for your help,
Yannick CAREL

Require Job name in SM37 while executing call transaction in background

Hi all,
I am executing a report program, which contains Call transaction.
I have recorded properly. The recording contains background job screen also ( means a separate popup came and i gave the job name and i gave immediately )
When i execute in this program in foreground its creating job,its showing the job in sm37.
But when i execute this program in background, it does not showing the job name in sm37.
Anyone kindly help this out?
Anandhab

Hi,
The job will be created by the step level user.
Try searching again with jobname and * for username.
Regards,
Jovito

I want in LSMW SAME CODING. THIS IS USING BDC CALL TRANSACTION

REPORT ZXX_BDC_PRA NO STANDARD PAGE HEADING LINE-COUNT 20
                                            LINE-SIZE 150 .
Program Name :ZXX_BDC_PRA                             *
Object Id     :                                        *
Develper Name : praveen                                *
Start Date    : 25.06.07                               *
Description   : uploading flat file to sap system      *
*--structure for Data Uploading.
DATA: BEGIN OF IT_STR ,
        VKORG LIKE RF02D-VKORG,
        VTWEG LIKE RF02D-VTWEG,
        SPART LIKE RF02D-SPART,
        KTOKD LIKE RF02D-KTOKD,
        NAME1 LIKE KNA1-NAME1,
        SORTL LIKE KNA1-SORTL,
        ORT01 LIKE KNA1-ORT01,
        PSTLZ     LIKE KNA1-PSTLZ,
        LAND1 LIKE KNA1-LAND1,
        SPRAS LIKE KNA1-SPRAS,
        END OF IT_STR.
*--Internal Table for Data Uploading.
DATA: ITAB LIKE IT_STR OCCURS 0.
*--Internal Table to sucessfull Records.
DATA:   ITAB1 LIKE IT_STR OCCURS 0.
*--Internal Table to Store Error Records.
DATA:    ITAB2 LIKE STANDARD TABLE OF IT_STR WITH HEADER LINE.
*--Internal Table for Storing the BDC data.
DATA: BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
*--Internal Table for storing the messages.
DATA:   MESSTAB LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
DATA:   COUNT TYPE I VALUE 1,
        S VALUE 0, E VALUE 0.
Selection screen *
SELECTION-SCREEN BEGIN OF BLOCK b1
                 WITH FRAME TITLE TEXT-001.
PARAMETERS: P_FILE TYPE IBIPPARMS-PATH.
SELECTION-SCREEN END OF BLOCK B1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
*functionality to use drill down list
CALL FUNCTION 'F4_FILENAME'
    EXPORTING
      PROGRAM_NAME = SYST-CPROG
      DYNPRO_NUMBER = SYST-DYNNR
    IMPORTING
      FILE_NAME     = P_FILE.
Start-of-selection *
START-OF-SELECTION.
DATA FILENAME TYPE STRING.
FILENAME = P_FILE.
*-- Form to upload flatfile data into the internal table.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      FILENAME                = FILENAME
      FILETYPE                = 'ASC'
      HAS_FIELD_SEPARATOR     = 'X'
    TABLES
      DATA_TAB                = ITAB
    EXCEPTIONS
      FILE_OPEN_ERROR         = 1
      FILE_READ_ERROR         = 2
      NO_BATCH                = 3
      GUI_REFUSE_FILETRANSFER = 4
      INVALID_TYPE            = 5
      NO_AUTHORITY            = 6
      UNKNOWN_ERROR           = 7
      BAD_DATA_FORMAT         = 8
      HEADER_NOT_ALLOWED      = 9
      SEPARATOR_NOT_ALLOWED   = 10
      HEADER_TOO_LONG         = 11
      UNKNOWN_DP_ERROR        = 12
      ACCESS_DENIED           = 13
      DP_OUT_OF_MEMORY        = 14
      DISK_FULL               = 15
      DP_TIMEOUT              = 16
      OTHERS                  = 17.
*--Generating the BDC table for the fields of the internal table.
LOOP AT ITAB INTO IT_STR.
    PERFORM BDC_DYNPRO      USING 'SAPMF02D' '0107'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'RF02D-KTOKD'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM BDC_FIELD       USING 'RF02D-VKORG'
                                  IT_STR-VKORG.
    PERFORM BDC_FIELD       USING 'RF02D-VTWEG'
                                   IT_STR-VTWEG.
    PERFORM BDC_FIELD       USING 'RF02D-SPART'
                                  IT_STR-SPART.
    PERFORM BDC_FIELD       USING 'RF02D-KTOKD'
                                    IT_STR-KTOKD.
    PERFORM BDC_DYNPRO      USING 'SAPMF02D' '0110'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'KNA1-SPRAS'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM BDC_FIELD       USING 'KNA1-NAME1'
                                IT_STR-NAME1.
    PERFORM BDC_FIELD       USING 'KNA1-SORTL'
                                    IT_STR-SORTL.
    PERFORM BDC_FIELD       USING 'KNA1-ORT01'
                                    IT_STR-ORT01.
    PERFORM BDC_FIELD       USING 'KNA1-PSTLZ'
                                  IT_STR-PSTLZ.
    PERFORM BDC_FIELD       USING 'KNA1-LAND1'
                                  IT_STR-LAND1.
    PERFORM BDC_FIELD       USING 'KNA1-SPRAS'
                                    IT_STR-SPRAS.
    PERFORM BDC_DYNPRO      USING 'SAPMF02D' '0120'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'KNA1-TXJCD'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM BDC_DYNPRO      USING 'SAPMF02D' '0125'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'KNA1-NIELS'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM BDC_DYNPRO      USING 'SAPMF02D' '0360'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'KNVK-NAMEV(01)'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '=ENTR'.
    PERFORM BDC_DYNPRO      USING 'SAPMF02D' '0310'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'KNVV-BEGRU'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM BDC_DYNPRO      USING 'SAPMF02D' '0324'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'KNVP-PARVW(01)'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '=ENTR'.
*--Calling the transaction 'Vd01'.
    CALL TRANSACTION 'VD01' USING BDCDATA MODE 'N' UPDATE 'S'
    MESSAGES INTO MESSTAB.
    PERFORM MESSAGES.
    REFRESH : BDCDATA, MESSTAB.
ENDLOOP.
END-OF-SELECTION.
*--Populating the Success records internal table.
IF ITAB1[] IS NOT INITIAL.
format color 5.
    WRITE: /'SUCCESSFUL RECORDS'.
    format color off.
    LOOP AT ITAB1 INTO IT_STR.
      WRITE:/ IT_STR-VKORG,IT_STR-VTWEG,
              IT_STR-SPART,IT_STR-KTOKD,
              IT_STR-NAME1,IT_STR-SORTL,
              IT_STR-ORT01,
              IT_STR-PSTLZ,
              IT_STR-LAND1,
              IT_STR-SPRAS.
      S = S + 1.
    ENDLOOP.
REFRESH : ITAB1.
    WRITE:/ 'TOTAL RECORDS',S.
ENDIF.
*--Populating the error records internal table.
IF ITAB2[] IS NOT INITIAL.
FORMAT COLOR 3.
    WRITE :/ 'ERRORS RECORDS ARE'.
FORMAT COLOR OFF.
    LOOP AT ITAB2.
      WRITE:/ ITAB2-VKORG,
              ITAB2-VTWEG,
              ITAB2-SPART,ITAB2-KTOKD,
              ITAB2-NAME1,ITAB2-SORTL,
              ITAB2-ORT01,
              ITAB2-PSTLZ,
              ITAB2-LAND1,
              ITAB2-SPRAS.
        E = E + 1.
    ENDLOOP.
REFRESH : ITAB2.
    WRITE: / 'TOTAL RECORDS',E.
REFRESH : ITAB2.
ENDIF.
End of Selection *
END-OF-SELECTION.
TOP-OF-PAGE *
TOP-OF-PAGE.
WRITE:/ SY-ULINE.
WRITE:/10 'REPORT ID',21 SY-REPID,35 'USERNAME',46 SY-UNAME,
60 'SYSTEM DATE',70 SY-DATUM,80 'SYSTEM TIME',90 SY-UZEIT,
100 'PAGE NO',108 SY-PAGNO.
WRITE:/ SY-ULINE.
FOrm to Populate the BDC table.
       Start new screen                                              *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR BDCDATA.
BDCDATA-PROGRAM = PROGRAM.
BDCDATA-DYNPRO   = DYNPRO.
BDCDATA-DYNBEGIN = 'X'.
APPEND BDCDATA.
ENDFORM.                    "BDC_DYNPRO
       Insert field                                                  *
FORM BDC_FIELD USING FNAM FVAL.
IF FVAL <> SPACE.
    CLEAR BDCDATA.
    BDCDATA-FNAM = FNAM.
    BDCDATA-FVAL = FVAL.
    APPEND BDCDATA.
ENDIF.
ENDFORM.                    "BDC_FIELD
*&      Form messages
FORM MESSAGES .
LOOP AT MESSTAB.
    IF MESSTAB-MSGTYP = 'I'.
     WRITE : / MESSTAB-MSGV1.
    ELSEIF
MESSTAB-MSGTYP = 'S'.
      INSERT LINES OF ITAB FROM COUNT TO COUNT INTO TABLE ITAB1 .
      COUNT = COUNT + 1.
     WRITE : / MESSTAB-MSGV1.
    ELSEIF
    MESSTAB-MSGTYP = 'E'.
      INSERT LINES OF ITAB FROM COUNT TO COUNT INTO TABLE ITAB2.
      COUNT = COUNT + 1.
     WRITE : / MESSTAB-MSGV1.
    ENDIF.
ENDLOOP.
ENDFORM.                    " messages

Hi
Go through the doc and do the same using LSMW
BDC is the way to transfer data by writing a batch input program which can use either session or call transaction method.
LSMW used to transfer data without/less code.
What type of data we transfer using LSMW?
LSMW is best suited for transferring master data.
Actually BDC and LSMW are not comparable at all.
for example LSMW itself can use BDC as a way of mass data transfer.
BDC is a mass data transfer technique via screen logic of existing SAP Data entry transactions. It behaves as if you are manually making thousand of entires into sap system as a background job. And that is probably the reason why BAPI's are preffered over BDC's.
On the other hand LSMW is a tool to facilitate DATA migration from other legacy systems ... It contains step by step procedure for data migration.
Like Managing Data Migration Projects , Creating Source Structures , Mapping Source structures wid Target structures , etc etc
LSMW internally might well be using the following techniqes for data transfer..
1. IDOX
2. Direct Input / BDC
4. BAPI's
LSMW is an encapsulated data transfer tool. It can provide the same functionality as BDC infact much more but when coming to techinical perspective most the parameters are encapulated. To listout some of the differences :
LSMW is basicaly designed for a fuctional consultant who do not do much coding but need to explore the fuctionality while BDC is designed for a technical consultant.
LSMW offers different techinque for migrating data: Direct input ,BAPI,Idoc,Batch input recording. While bdc basically uses recording.
LSMW mapping is done by SAP while in BDC we have to do it explicitly .
LSMW is basically for standard SAP application while bdc basically for customized application.
Coding can be done flexibly in BDC when compared to LSMW
1. Maintain Attributes:
Here you have to choose the second option and you can do the recording how this should work. Then assign the same to the Batch Input Recording name.
2. Maintain Source structure:
Create a structure name
3. Maintain Source field:
In this you have to create a structure same as that of the input file
eg: name
age
4. Maintain structure relations:
This will link the structure to the input file.
5. Maintain field mapping and conversion rules:
Here is the place where you can do coding, depending upon the code you have written or assignment you have done the values will get picked up from the file and get processed.
6. Maintain field mapping and conversion rules:
If you have any fixed values you can define here.
7. Specify files:
Specify the input file path and type.
8. Assign files:
This will assign ur file to the Input file
9. Read Data:
This will read ur data from teh file.
10. Dispaly Read Data:
You can see the uploaded data
11. Convert Data
This will convert the data to the corresponding format for processing
12. Display Converted data:
13. Create batch input session
Here this will create a batch input session for processing
14. Run Batch Input session:
By clicking on the session and process the same you can do teh needfu.
http://www.sapbrain.com/TOOLS/LSMW/SAP_LSMW_steps_introduction.html
http://esnips.com/doc/8e732760-5548-44cc-a0bb-5982c9424f17/lsmw_sp.ppt
http://esnips.com/doc/f55fef40-fb82-4e89-9000-88316699c323/Data-Transfer-Using-LSMW.zip
http://esnips.com/doc/1cd73c19-4263-42a4-9d6f-ac5487b0ebcb/LSMW-with-Idocs.ppt
http://esnips.com/doc/ef04c89f-f3a2-473c-beee-6db5bb3dbb0e/LSMW-with-BAPI.ppt
http://esnips.com/doc/7582d072-6663-4388-803b-4b2b94d7f85e/LSMW.pdf
for Long texts Upload
Please take a look at this..
http://help.sap.com/saphelp_erp2005/helpdata/en/e1/c6d30210e6cf4eac7b054a73f8fb1d/frameset.htm
Reward points for useful Answers
Regards
Anji

How to create bdc for fbs1 using both call transaction and session

Hi Friends,
i have one problem with tcode FBS1, i need to create a bdc program for both call transaction and session method using subroutine.
first call transaction needs to execute if there is an error sesion has to execute. if u have code please forward.
thanks in advance.
chandramouli pothugunta

where as in call transaction we can do error handling explictly.those errors are stored in one file .this file will send to the error log(session method),i.e session log.
in the above case we use both call transaction n session method at time in one program.sample code is below ,go through it .
data : begin of itxk01 occurs 0,
end of itxk01.
data : bdcdata like itbdcdata occurs 0 with header line.
data : itbdcmsgcoll like itbdcmsgcoll occurs 0 with header line,
itxk01 like itxk01-dup occurs 0 with header line.
call gui-upload.
loop at itxk01.
refresh itxk01.
perform bdc-dynpr0 using 'prg' 'scr'
perform bdc-dynfld using fnam fval
call transaction 'xk01' using bdcdata mode 'a' update 's' messages into itbdcmsgcoll.
if sy-subrc ne 0.
append itxk01 into itxk01-dup.
endif.
endloop.
if not itxk01-dup[] is initial.
refresh itck01.
call bdc_open_group
itxk01 = itxk01-dup.
loop at itxk01.
refresh itxk01.
perform bdc-dynpr0 using 'prg' 'scr'
perform bdc-dynfld using fnam fval
call bdc-insert.
endloop.
call bdc-close-group.
form bdc-dynpr0 using pr sc
endform .
form bdc-field using fnam faval
endform.
this will help u.
reward points for me
kiran

RFC enabled function module using call transaction

Hi,
We have a scenario wherein we have a RFC enabled function module which inturn uses a call transaction to create a PM order & attaches the PM notification against it. Sometimes it so happens that the order does not get created for some reason or the other and there are no logs generated on the system to investigate. However we are capturing the messages produced via the BDCMSGCOLL. At present we are using the update parameter as 'L'.
In some scenarios it states that the notification is locked by the same notification and comes out without creating the order, in this process we are losing out on the order & the notification number which if successful would have got updated in the database.
I know this could be done via the BAPI, but there are innumerable steps within the BDC which can't be actually done using the BAPI and hence we could not use this procedure.
Is there any other way by which we can ensure that there's always a successful order creation, I mean without losing out on the order/notification number?. Would changing the update mode to 'S' help?. Since this process is time bound, it can't actually take more time then what its taking with the current logic.
Please let me know if you require further details on the same. Any help in this regard would be highly appreciated.
Regards,
Vidya

Sorry for an unclear replay.
In Simple terms; I have 2 scenarios;
Launch a new tab (IW38 tcode), on click of a button in SAP screen of custom transaction in NWBC.
Launch a new tab (IW38 tcode), on click of a button in a Non - SAP App opened (using URL) in NWBC.
For 1st case, i have used
CL_NWBC=>URL_CONSTRUCT
EXPORTING
     CANVAS_WDA__CLIENT_TYPE       = 'nwbc'
     CANVAS_TRANSACTION            = 'IW38'
RECEIVING
     URL                           = lv_URL.
CALL METHOD CL_NWBC=>URL_LAUNCH
   EXPORTING
     URL    = lv_url
But it gets open in NWBC HTML not in NWBC Desktop client.
I tried all the Parameters you have mentioned in your response to this post earlier, but nothing worked. the last one is CANVAS__WINDOW which actually hides the top area and few buttons but still it is a HTML version.
If i set the HTML_CLIENT = ABAP_FALSE, it launches a new window instead of the tab and asks for Login. If i login in can see the IW38 in NWBC desktop client. But the only problem is we have the restriction of single window/single login for users.
I am on NWBC PL12 and also updated the GUI 7.3 to PL8.
Simply the problem is URL_CONSTRUCT for any transaction is launching it in a new tab but in HTML Version.
For 2nd case,
It asks for the login details on click of a button on the 3rd party URL opened in NWBC. which means i am launching SAP from a 3rd party.
Is there any way to achieve the launch of new tab in this case instead of the new window ?
I hope its more clear now.
Regards,
Nik.

Error 00-341 RAISE_EXCEPTION when using Call Transaction for VA01 in backgr

Hi,
I am getting this message when I use call transaction to create a sales order using VA01. Following is the statement I have used. Note that when i execute the program online, I am not getting any errors. I could create sales order without any problem. I am getting this exception only when I run in background.
      CALL TRANSACTION 'VA01'
                 USING BDC_TAB
                  MODE 'N'
                UPDATE 'S'
         MESSAGES INTO W_MESS_TAB.
When I captured message tab, I got following messages.
DC006 - Control Framework: Fatal error - GUI cannot be reached
00341 Runtime error RAISE_EXCEPTION has occurred.
Please help me in this regard.
Regards
Kasi

Some times execution of BDC program in back ground is different from the foreground. Some screens may appear in background and raise error while same will not when executed in foreground.
Double click the message in Session log to know more details.
One way is to suppress the screen while executing BDC.
Alternatively I suggest to use BAPI instead.
- Sanjay

BDC using call transaction

Hi ,
This is vijay...
can anyone help me plz
Hi,
Iam uploading data using call transaction.Tcode is ff67.In this TCode we have the begining balance(ssald) and ending balance(esald).The new record we are uploading will take the begining balance as the previous record ending balance, if we give the begining balance wrong then the record does not saved it will show error(the begining balance does not match with the prior ending balance).
while uploading the data using MODE A iam able to get the desired output but by using the MODE N iam not able to get the desired output i,e if there is any error in the begining balance also the record is being saved iam not getting the error message.
Iam attaching the code below..please help me
report Z_BRS_BDC no standard page heading line-size 255.
        INTERNAL TABLES DECLARATIONS
DATA : BEGIN OF bdcdata OCCURS 0.
        INCLUDE STRUCTURE bdcdata.
DATA : END OF bdcdata.
DATA: LV_OUT TYPE STRING.
DATA : iopt LIKE ctu_params.
DATA : wa_rec_err   TYPE i.
DATA : wa_rec_wri TYPE i.
DATA : wa_tot_rec TYPE i.
DATA : amt(16) type c.
DATA : BEGIN OF gu_upload OCCURS 0,
       hbkid LIKE febmka-hbkid,
       hktid LIKE febmka-hktid,
       aznum LIKE febmka-aznum,
       azdat LIKE febmka-azdat,
       ssald LIKE amt,
       esald LIKE amt,
       budtm LIKE febmka-budtm,
       mnam1 LIKE febmka-mnam1,
       jname LIKE febmka-jname,
       vgman LIKE febmka-vgman,
       valut LIKE febep-valut,
       kwbtr(13) TYPE c,
       chect_kf LIKE febmkk-chect_kf,
      END OF gu_upload.
DATA:GU_DOWNLOAD LIKE GU_UPLOAD OCCURS 0 WITH HEADER LINE.
kishi*********************************
DATA: BEGIN OF itab OCCURS 0,
     vgman LIKE febmka-vgman,
     valut LIKE febep-valut,
     kwbtr(13) TYPE c,
     chect_kf LIKE febmkk-chect_kf,
     END OF itab.
kishi)(_()00-8-09
DATA: BEGIN OF messtab OCCURS 0.
        INCLUDE STRUCTURE bdcmsgcoll.
DATA: END OF messtab.
DATA: BEGIN OF messtab1 OCCURS 0.
        INCLUDE STRUCTURE messtab.
DATA: END OF messtab1.
DATA : BEGIN OF int_count OCCURS 0.
        INCLUDE STRUCTURE alsmex_tabline.
DATA : END OF int_count.
DATA: c_tcode      LIKE sy-tcode              VALUE 'FF67',
      c_upd        LIKE ctu_params-updmode    VALUE 'S',
      c_def_size   LIKE ctu_params-defsize    VALUE 'X'.
*VALUES FOR STARTING COLUMNS AND ROWS IN THE EXCEL SHEET
DATA : c_begcol     TYPE i                     VALUE '1',
      c_begrow     TYPE i                     VALUE '1',
*DATA IS ENDED AT THE 13TH COLUMN IN THE EXCELSHEET
      c_endcol     TYPE i                     VALUE '13',
*LAST ROW IN THE EXCEL SHEET
      c_endrow     TYPE i                     VALUE '65536',
      c_path(3)    TYPE c                     VALUE 'C:\'.
*Field Symbols
FIELD-SYMBOLS: <fs>.
     SELECTION SCREEN PARAMETERS
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS : p_file LIKE rlgrap-filename DEFAULT
'C:\ ',
*This is the path for downloading file
P_FNAME2 LIKE RLGRAP-FILENAME ,
c_mode LIKE ctu_params-dismode DEFAULT 'N'.
SELECTION-SCREEN END OF BLOCK b1.
AT SELECTION-SCREEN.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
*F4 HELP FOR FILE SELECTION
PERFORM validate_input_file.
START-OF-SELECTION.
CLEAR gu_upload.
REFRESH gu_upload.
     UPLOAD THE DATA FROM FLAT FILE TO INTERNAL TABLE
PERFORM file_upload.
iopt-dismode = c_mode.
iopt-updmode = c_upd.
iopt-defsize = c_def_size.
     POPULATE THE DATA THROUGHSCREENS
PERFORM bdc_upload.
END-OF-SELECTION.
*DISPLY THE ERROR RECORDS
PERFORM DISPLAY-DATA.
      FORM file_upload                                              *
FORM file_upload.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
       EXPORTING
            filename                = p_file
            i_begin_col             = c_begcol
            i_begin_row             = c_begrow
            i_end_col               = c_endcol
            i_end_row               = c_endrow
       TABLES
            intern                  = int_count
       EXCEPTIONS
            inconsistent_parameters = 1
            upload_ole              = 2
            OTHERS                  = 3.
LOOP AT int_count.
    ASSIGN COMPONENT int_count-col OF STRUCTURE gu_upload TO <fs>.
    IF sy-subrc NE 0.
      EXIT.
    ENDIF.
    <fs> = int_count-value.
    AT END OF row.
      APPEND gu_upload.
      CLEAR gu_upload.
    ENDAT.
ENDLOOP.
*kishhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
LOOP AT gu_upload.
    itab-vgman = gu_upload-vgman.
    itab-valut = gu_upload-valut.
    itab-kwbtr = gu_upload-kwbtr.
    itab-chect_kf = gu_upload-chect_kf.
    APPEND itab.
ENDLOOP.
*kishiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
ENDFORM.                    "file_upload
*&      Form BDC_UPLOAD
FORM bdc_upload.
LOOP AT gu_upload.
    CLEAR bdcdata.
    REFRESH bdcdata.
*&      POPULATE THE DATA FOR FIRST SCREEN
perform bdc_dynpro      using 'SAPMF40K' '0101'.
perform bdc_field       using 'BDC_CURSOR'
                              'FEBMKA-JNAME'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'FEBMKA-BUKRS'
                              'IN14'.
perform bdc_field       using 'FEBMKA-HBKID'
                              gu_upload-hbkid.
perform bdc_field       using 'FEBMKA-HKTID'
                              gu_upload-hktid.
perform bdc_field       using 'FEBMKA-AZNUM'
                              gu_upload-aznum.
perform bdc_field       using 'FEBMKA-AZDAT'
                              gu_upload-azdat.
perform bdc_field       using 'FEBMKA-SSALD'
                              gu_upload-ssald.
perform bdc_field       using 'FEBMKA-ESALD'
                              gu_upload-esald.
perform bdc_field       using 'FEBMKA-BUDTM'
                              gu_upload-budtm.
perform bdc_field       using 'FEBMKA-MNAM1'
                              gu_upload-mnam1.
perform bdc_field       using 'FEBMKA-JNAME'
                              gu_upload-jname.
*&      POPULATE THE DATA FOR SECOND SCREEN
    DATA : fnam(20) TYPE c,
          idx      TYPE c.
    MOVE 1 TO idx.
    LOOP AT itab.
      PERFORM bdc_dynpro      USING 'SAPMF40K' '8000'.
      PERFORM bdc_field       USING 'BDC_CURSOR'
                                    'FEBMKK-CHECT_KF(03)'.
      PERFORM bdc_field       USING 'BDC_OKCODE'
                                    '/00'.
      CONCATENATE 'FEBMKA-VGMAN(' idx ')' INTO fnam.
      PERFORM bdc_field       USING fnam
                                    itab-vgman.
      CONCATENATE 'FEBEP-VALUT(' idx ')' INTO fnam.
      PERFORM bdc_field       USING fnam itab-valut.
      CONCATENATE 'FEBMKA-KWBTR(' idx ')' INTO fnam.
      PERFORM bdc_field       USING fnam itab-kwbtr.
      CONCATENATE 'FEBMKK-CHECT_KF(' idx ')' INTO fnam.
      PERFORM bdc_field USING fnam itab-chect_kf.
      idx = idx + 1.
    ENDLOOP.
*perform bdc_dynpro      using 'SAPMF40K' '8000'.
*perform bdc_field       using 'BDC_CURSOR'
                             'FEBMKK-CHECT_KF(01)'.
*perform bdc_field       using 'BDC_OKCODE'
                             '/00'.
*perform bdc_field       using 'FEBMKA-VGMAN(01)'
                             'z001'.
*perform bdc_field       using 'FEBEP-VALUT(01)'
                             '2007/04/26'.
*perform bdc_field       using 'FEBMKA-KWBTR(01)'
                             '          5000-'.
*perform bdc_field       using 'FEBMKK-CHECT_KF(01)'
                             '1122'.
perform bdc_dynpro      using 'SAPMF40K' '8000'.
perform bdc_field       using 'BDC_CURSOR'
                              'FEBMKK-CHECT_KF(01)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=SICH'.
*&      POPULATE THE DATA FOR FOURTH SCREEN
perform bdc_dynpro      using 'SAPMF40K' '0101'.
perform bdc_field       using 'BDC_CURSOR'
                              'FEBMKA-BUKRS'.
perform bdc_field       using 'BDC_OKCODE'
                              '=BUCH'.
perform bdc_field       using 'FEBMKA-BUKRS'
                              'IN14'.
perform bdc_field       using 'FEBMKA-HBKID'
                              gu_upload-hbkid.
perform bdc_field       using 'FEBMKA-HKTID'
                              gu_upload-hktid.
perform bdc_field       using 'FEBMKA-AZNUM'
                              gu_upload-aznum.
perform bdc_field       using 'FEBMKA-AZDAT'
                              gu_upload-azdat.
perform bdc_field       using 'FEBMKA-SSALD'
                              gu_upload-ssald.
perform bdc_field       using 'FEBMKA-ESALD'
                              gu_upload-esald.
perform bdc_field       using 'FEBMKA-BUDTM'
                              gu_upload-budtm.
perform bdc_field       using 'FEBMKA-MNAM1'
                              gu_upload-mnam1.
perform bdc_field       using 'FEBMKA-JNAME'
                              gu_upload-jname.
*perform bdc_dynpro      using 'SAPMF40K' '0101'.
*perform bdc_field       using 'BDC_OKCODE'
                             '/EENDE'.
*perform bdc_field       using 'BDC_CURSOR'
                             'FEBMKA-BUKRS'.
perform bdc_dynpro      using 'SAPMF40K' '0101'.
perform bdc_field       using 'BDC_OKCODE'
                              '/EABBR'.
perform bdc_field       using 'BDC_CURSOR'
                              'FEBMKA-BUKRS'.
*&      USING THE CALL TRANSACTION
    PERFORM call_transaction.
   CLEAR BDCDATA.                      "<--- Add here
   REFRESH BDCDATA.                 "<--- Add here
ENDLOOP.
ENDFORM.                    " BDC_UPLOAD
*&      Form VALIDATE_INPUT_FILE
FORM validate_input_file.
CALL FUNCTION 'WS_FILENAME_GET'
       EXPORTING
            def_path         = ' c:\ '
            mask             = ',.txt,.*.'
            mode             = 'O'
            title            = 'Upload '
       IMPORTING
            filename         = p_file
       EXCEPTIONS
            inv_winsys       = 1
            no_batch         = 2
            selection_cancel = 3
            selection_error = 4
            OTHERS           = 5.
IF sy-subrc <> 0.
IF sy-subrc <> 0 AND sy-subrc <> 3.
   MESSAGE e100(zm) WITH text-007.
ENDIF.
ENDFORM.                    " VALIDATE_INPUT_FILE
       Start new screen                                              *
FORM bdc_dynpro USING program dynpro.
CLEAR bdcdata.
bdcdata-program = program.
bdcdata-dynpro   = dynpro.
bdcdata-dynbegin = 'X'.
APPEND bdcdata.
ENDFORM.                    "bdc_dynpro
       Insert field                                                  *
FORM bdc_field USING fnam fval.
CLEAR bdcdata.
bdcdata-fnam = fnam.
bdcdata-fval = fval.
APPEND bdcdata.
ENDFORM.                    "bdc_field
*&      Form CALL_TRANSACTION
FORM call_transaction.
DATA: l_index LIKE sy-tabix.
CALL TRANSACTION c_tcode USING bdcdata
                            MODE c_mode
                            MESSAGES INTO messtab.
*POPULATE THE ERROR RECORDS INTO INTERNAL TABLE
IF SY-SUBRC NE 0.
    GU_DOWNLOAD-HBKID = GU_UPLOAD-HBKID.
   GU_DOWNLOAD-HBKID = GU_UPLOAD-HBKID.
    GU_DOWNLOAD-HKTID = GU_UPLOAD-HKTID.
    GU_DOWNLOAD-AZNUM = GU_UPLOAD-AZNUM.
    GU_DOWNLOAD-AZDAT = GU_UPLOAD-AZDAT.
    GU_DOWNLOAD-ESALD = GU_UPLOAD-ESALD.
    GU_DOWNLOAD-SSALD = GU_UPLOAD-SSALD.
    GU_DOWNLOAD-BUDTM = GU_UPLOAD-BUDTM.
    GU_DOWNLOAD-MNAM1 = GU_UPLOAD-MNAM1.
    GU_DOWNLOAD-JNAME = GU_UPLOAD-JNAME.
    GU_DOWNLOAD-VGMAN = GU_UPLOAD-VGMAN.
    GU_DOWNLOAD-VALUT = GU_UPLOAD-VALUT.
    GU_DOWNLOAD-KWBTR = GU_UPLOAD-KWBTR.
    GU_DOWNLOAD-CHECT_KF = GU_UPLOAD-CHECT_KF.
    APPEND GU_DOWNLOAD.
*DISPLAY THE PROGRESS OF PROCESS
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
   PERCENTAGE       = 0
   TEXT             = 'Downloading is in process'.
*DOWNLOADING THE ERROR RECORD
    LV_OUT = P_FNAME2.
    CALL FUNCTION 'GUI_DOWNLOAD'
      EXPORTING
        FILENAME               = LV_OUT
        WRITE_FIELD_SEPARATOR =      'X'
      TABLES
        DATA_TAB                = GU_DOWNLOAD.
ENDIF.
IF NOT messtab[] IS INITIAL.
    PERFORM format_message.
ENDIF.
ENDFORM.                    " CALL_TRANSACTION
*&      Form DISPLAY-DATA
FORM display-data.
SKIP.
WRITE: 'SY-SUBRC' , sy-subrc.
ENDFORM.                    " DISPLAY-DATA
      FORM FORMAT_MESSAGE                                           *
FORM format_message.
DATA: l_msg(100),
   l_index LIKE sy-tabix.
LOOP AT messtab.
    READ TABLE gu_upload INDEX l_index.
    CALL FUNCTION 'FORMAT_MESSAGE'
         EXPORTING
              id        = messtab-msgid
              lang      = sy-langu
              no        = messtab-msgnr
              v1        = messtab-msgv1
              v2        = messtab-msgv2
              v3        = messtab-msgv3
              v4        = messtab-msgv4
         IMPORTING
              msg       = l_msg
         EXCEPTIONS
              not_found = 1
              OTHERS    = 2.
    IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
   WRITE:/ l_msg.
ENDLOOP.
WRITE:/ l_msg.
ENDFORM.
Message was edited by:
        vijayd duvvada

Hi,
First , keep the mode "E" and check the debugger , you can exactly see where the error is and let me know, what error and where it is stoping.
By your coding, i suppose to think that, its proble in the amount (currency). When ever you are try to pass the value, and value is not there in upload file or data is mismatch, the call transaction will fail in mode 'A' and succesful in mode 'N'.
In that situation use this before the currecny field.
IF NOT FEBMKA-SSALD IS INTIAL.
   perform bdc_field using 'FEBMKA-ESALD'
                                  gu_upload-esald.
ENDIF.
tHANKS
Manju

Call Transaction and skip first screen on workflow task

Hello, I'm developing a workflow with a user decison step, where the user should fill some data in transaction FD02.
When the user presses the button in the workitem, the wf goes to a step where i should call transaction FD02.
I'm using SET PARAMETER ID: 'KUN' FIELD customer. to fill the customer field and CALL TRANSACTION 'FD02' AND SKIP FIRST SCREEN.
But when I press the button in the workitem nothing happens. I tested the same in a report and it works. Can anybody help me?
Thanks a lot.

Hi,
try below code
data: fcode type FCODE value 'ANTRAGAEN',
       customer type kunner,
       bukrs type bukrs.
SET PARAMETER ID 'KUN' FIELD customer. " to fill the customer field
SET PARAMETER ID 'BUK' FIELD companycoder. " to fill the company code
SET PARAMETER ID 'TTC' FIELD fcoder.       " to fill Function code for enter " it may be other than TTC please check.
CALL TRANSACTION 'FD02' AND SKIP FIRST SCREEN.

CALL TRANSACTION AND SKIP FIRST SCREEN to specified tab in TCODE 'IW32'

Hi,
I am using CALL TRANSACTION AND SKIP FIRST SCREEN in ALV Grid Report to call IW32 tcode and it goes to tcode skipping the first screen. But it goes to the default header tab in the tab control. Whereas I wish to go to the specified tab 'OPERATIONS'.
Can any one help me, as to how to resolve this issue ?
Thanks in advance.

Sridher,
I have the similar requirement. but in my case its COSTS tab. Could you please provide the code you have used for this to work?
I used standard "call transaction with mode 'E' ". This seems to be working but I am not pleased by my effort. Is there any proper way that you might have followed ?
Greatly appreciated your help.
Regards,
Reddy

Call transaction help

Similar Messages

Maybe you are looking for