Process not getting correlated and going into manual recovery stage

Hi
I have developed a bpel process which implements correlation. I have unit tested it and is working fine. But am encountering issues in case of load.
The process which should correlate to the running process is going into manual recovery and the correlation is not happening. Whenever is restart the managed server, and then recover the instance things are getting completed and correlation is happening.
Can some one suggest what might be the problem in this case
Thanks in advance

Sumit,
This occurs because your process has not dehydrated to the dehydration store yet.
The process has not failed but it is waiting for a response from some partner link in your BPEL process. This can be common when calling async ESBs and the ESB fails.
To try and debug this you will need to look at the domain.log and see if any error is generated. Have a look at your BPEL process and see what partner link cal cause a failure yet not send a response back.
Is the DB adapter the only partner link or are there others?
cheers
James

Similar Messages

My iPhone 3gs is shutting down and going into un-recovery mode?? : (

Hi, its my first time on here, due to the fact that I have never ever had any problems with my iPhone 3gs.
Until 3 weeks ago.
It all started when my e-mail decided that it was going to be difficult. so I go to restart my iPhone and my screen lock/ power button does not respond at all. then the trouble ensues.. two days later, (after I ran the battery to nadda so it would turn off) and was fully charged, my phone cut out while I was sending a text. I was connected to wifi. the cell service bars were gone, and 3-5 seconds later my wifi disappeared also. at this point I was thinking dude? and the touch screen was still functioning. so I checked the network settings and my screen became unresponsive. my phone then went instantly to a black but still lit screen and then was off. my lock button still would not work so it wouldn't turn on with that, so I hit the home button and it showed a screen with a iTunes symbol and a USB cord, and a slide for emergency call bar. also there was a little quetion mark circle thing so I tapped it and a screen with two four letter acronyms and a number set for each showed up. long story shortened, I call apple and am on the phone with them for 5-6 hours over the next two weeks. they were of absolutely no use, and proceeded to lay into me about how I am using too much data.. and that my phone is probably not going to be fixable.
I get it to work by popping my sim card and restoring it then puting it back in and factory reset it with the sim card in it.
I get it working again and it is fine until last night. same exact thing.
what can I do?? im lost.
Information that might help..
my phone has had around 200+(10-30) gigs run through cellular data (3G)
about 450 gigs total including wifi. X (
has never been jailbroken, dropped, opened, water damage etc..
current i tunes/iphone updates.
windows 7
iTunes 64 bit
AT&T
will post more info if you want to help ..
THANK YOU!!!

If I was in your shoes, I would choose to restore the iPhone with iTunes and then choose to NOT restore a previous backup. I'd then go on to set up the phone as though it were totally new, and choose the stuff to load onto it.
The reason I'd go through that trouble.. even though it meant losing a lot of settings and having to set stuff up again .. is because I wasn't sure I could trust the backup that it's restoring from.
If you have trouble again after doing the fresh reload -- especially if it's soon after you do it -- you may have a hardware issue with the phone, such as faulty flash memory or a processor chip that's failing. If that's the case, you'll want to consider your repair/replacement options at that point.

I am trying to get space on an external hard drive which has some old time machine back up files that I do not need but can not eliminate, even by going into the time machine, clicking on the backup file to be eliminated and using the drop down eliminate

I am trying to get space on an external hard drive which has some old time machine back up files that I do not need but can not eliminate, even by going into the time machine, clicking on the backup file to be eliminated and using the drop down menu with the gear box symbol to eliminate

I cannot find this 300GB "Backup" in the Finder, only in the Storage info when I check "About This Mac".
You are probably using Time Machine to backup your MacBook Pro, right? Then the additional 300 GB could be local Time Machine snapshots. Time Machine will write the hourly backups to the free space on your hard disk, if the backup drive is temporarily not connected. You do not see these local backups in the Finder, and MacOS will delete them, when you make a regular backup to Time Machine, or when you need the space for other data.
See Pondini's page for more explanation: What are Local Snapshots? http://pondini.org/TM/FAQ.html
I have restarted my computer, but the information remains the same. How do I reclaim the use of the 300GB? Why is it showing up as "Backups" when it used to indicate "Photos"? Are my photos safe on the external drive?
You have tested the library on the external drive, and so your photos are save there.
The local TimeMachine snapshot probably now contains a backup of the moved library. Try, if connecting your Time Machine drive will reduce the size of your local Time Machine snapshots.

HT1267 I have a factory unlocked Iphone 4S, it worked fine but it was lossing the signal and going into search, I decided to restore, but now can not activate it, a message can not be activated because the server is temporary unavailable try again later??

I have a factory unlocked Iphone 4S, it worked fine but it was often lossing signal and going into search, I decided to restore, but now can not activate it, a message can not be activated because the server is temporary unavailable try again later, I have tried this for 3 days, any suggestions?

yes did you buy it of somebody or a well known company such as apple or carphone warehouse?
and i mean the phone would have been activated in the first place with the sim card you get given when you first get the phone.
trying to activate the phone with another sim card that you did not get when you brought the phone may result in you not being able to activate it
no worries

Hi, I m using an iPhone 4 and my yahoo push email was working just fine but for the last few days I am experiencing some problem that is the emails are not getting pushed , I have to manually fetch the mails. So what could be the reason for this....

Hi, I m using an iPhone 4 and my yahoo push email was working just fine but for the last few days I am experiencing some problem that is the emails are not getting pushed , I have to manually fetch the mails. So what could be the reason for this.....I have set the email setting to "push" mode. Moreover I can't edit the mail server address ....current it's on Yahoo SMTP server

Will it get rectified and restored...if so after how long. What could be the reason for such outage kindly share, as I am facing real problem because of this...

Streaming audio from my IPAD to my Apple TV from Rhapsody application. when Apple TV go into Screen Saver mode, about 5 minutes after that it stops playing the Audio Stream and goes into Sleep mode.

I am Streaming audio from my IPAD to my Apple TV from Rhapsody application. when Apple TV go into Screen Saver mode, about 5 minutes after that it stops playing the Audio Stream and goes into Sleep mode. I am using the Optical Out from the Apple TV to my receiver, the Apple TV is hard Wired to the Network, the IPAD is Wirelessly attached to the network (it continues to play the Audio Stream). When the Apple TV is turned back on it resumes playing once I manual select it for output from the IPAD. All device are on current releases of software. I have no Video hooked up to the Apple TV. How do I correct this?

Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.

Issue regarding Planning layout is not getting rendered and is dumping at : CL_RSDRC_TREX_QUERY_LAYER ~ _GET_PARTPROVS_WITH_TREX_PART in SAP TPM IP

Gurus,
I am facing an issue regarding SAP TPM IP ( HANA)
I have 3 Infoproviders
Planning infocube, Planning DSO1, Planning DSO2 and i created multiprovider and added these 3 infoproviders into it. I have created Aggregation level on multiprovider. Created Bex Input ready query on Aggregation level.
Issue is Planning layout is not getting rendered and is dumping at : CL_RSDRC_TREX_QUERY_LAYER ~ _GET_PARTPROVS_WITH_TREX_PART.
I tried debugging it and found it is trying to read i_r_pro -> n_ts_part. It is populated with only 3 values (i.e. 2DSOs and 1 Cube), whereas <l_partprov>-partprov is referring to Aggergation level, hence read statement isn't successful, it is dumping.
The class CL_RSD_INFOPROV_CACHE->GET() method is trying to populate the N_TS_PART.N_TS_PART uses P_R_INFOPROV table which seems to be already populated. So, I debugged all the below methods to find out how the P_R_INFOPROV but couldn't find any clue.
Can any one help,it would be really help.
Thanks
Ashok

Hello Gregor,
On the launch of planning layout it throws an error message:
Planning is not possible RSCRM_IMP_CORE008.
When I debugged, i got to a point wherein
particular Real Time Planning DSO is
not getting retrieved under the MultiProivder in below class.
Class: CL_RSCRM_IMP_ACTIONS_SERVICE, Method: GET_INFOPROV is not
returning the real time Info-Provider Name(i.e. Planning DSO)
underlyingthe Multiprovider.
I've also tried to run the report mentioned by you for the Multiprovider but issue still exists.
Let me know, if you have any pointers on this topic.
Thanks,
Jomy

Credit note is not getting generate and there is no error log

Hi,
Could you please help with the following scenario.
I have created a credit memo with reference to a billing document. Then when I try and create a credit note for this credit memo, it does not get generated and the following message apprears 'No billing documents were generated'
Processing status for this is - 'Not Processed'
and there are no messages in the error log as well.
Could you please advise as to what the missing configuration might be? As i can't seem to find what is causing the problem
Your advise is much appreciate.
Thanks & Regards,
Amalie

Kindly create a Credit Memo Request wrt to Billing Document by maintaining in the Copying Control through VTAF and then create a Credit Memo wrt Credit Memo request through VTFA.
Then go to VOFA with your Billing Type and maintain Account Determination Procedure.
it does not get generated and the following message apprears 'No billing documents were generated'
Do you able to get the Number while saving the Credit Memo or not able to save it .
Kindly check the configuration of Account ket in VKOA also .
Best Regards,
Ankur

My computer is crashing regularly and goes into EFI SHELL.

My computer is crashing regularly and goes into EFI SHELL.
This is what it says:
EFI Shell Version 2.31.
Current running mode 1.1.2 Map: Cannot find required map name.
Press Esc in 5 seconds to skip startup.nsh, any other key to continue.
When I type "exit" to get to the bios, I restore to default settings, save changes and reboot. Then Windows starts and everything works fine for a little while.
I have also tried to reset the CMOS without any luck.
This is my PC:
Motherboard: MSI Z97M-G43
SSD: Crucial MX100 2.5" 256GB
CPU: Intel Core i5 4690K 3,5GHz
GPU: Gigabyte GeForce GTX 970 4GB PhysX CUDA
Please advise.

I updated the bios today and the computer has been running perfect all day.
Hope the update worked
Thanks for all the answers.

Unable to view invoices and going into enter mode.

Dear all,
Under the Receivables Inquiry responsibility in the AR transaction forms (view invoice).
Unable to view invoices and going into enter mode.
Please help to debug this issue.
Thanks for your help in advance.
With Regards,
Sunil Kumar Mallina.

Please post the details of the application release, database version and OS.
Under the Receivables Inquiry responsibility in the AR transaction forms (view invoice).
Unable to view invoices and going into enter mode. Was this working before? If yes, any changes have been done recently?
Do you get any error? Please elaborate more.
Thanks,
Hussein

I installed Mac OS 10.9.4, but did not get iLife and iWorks. How can I obtain these

I installed Mac OS 10.9.4, but did not get iLife and iWorks. How can I obtain these? Somebody talked about redemption codes, but I did not find any extra information. Any suggestions?
Thanks in advance and best regards

If your computer shipped with Mac OS X 10.6.8 or earlier, install them from the computer's original disks.
If your computer shipped with Mac OS X 10.7 or newer, log into the Mac App Store with the Apple ID used to register the computer, click on the Purchases tab, and download them.
If neither of these is applicable, buy them from the Mac App Store.
(109450)

My macbook boots up and only stays on for 30sec and goes into sleep mode

My macbook boots up and only stays on for 30sec and goes into sleep mode! Any suggestions as to why this might be happening? Thanks....

I assume you have checked your sleep settings in System Preferences>Energy saver
I also assume this has just happened recently and spontaneously, not after installing any particular hardware or software or you would probably have mentioned it...if anything new has been added recently, obviously just remove it!
It could be the battery - have your tried it just on mains? If it's a pre unibody MacBook try it without the battery at all. This could happen if you have a non-Apple (cheap Chinese) replacement battery.
Try NVRAM, PRAM & SMC resets (Google if you don't know how)
Try booting from the install media and repairing or reinstalling OS X. (Back up first!)
Just out of interest if you boot from a DVD or go into Open Firmware or Boot Select modes, does it still sleep after 30 seconds or is it just in OS X?

HR iViews are not getting displayed and showing "Page can not be found".

Hello,
I am facing an issue in the EP 7 wherein all the standard HR iViews are not getting displayed and showing "Page can not be found".
We have added S_SERVICE autorisation object to user used for the relative JCO as well by looking at other similar forums but that did not help.
I have attached last part of log from file application.log under "F:\usr\sap\EP1\JC01\j2ee\cluster\server0\log"
#0002A537D2A6006A0000027300001C4C00046E3590936E5F#1247076244733#/Applications/WebApplications#sap.com/irj#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Administrator#12374##n/a##b7291b106be911de8d8a0002a537d2a6#SAPEngine_Application_Thread[impl:3]_27##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Plain###application [irj] prt: init#
#1.5 #0002A537D2A6007A0000001200001C4C00046E35AAA74D33#1247076682222#/Applications/WebApplications##com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Guest#0##n/a##cf997d306af811dec69d0002a537d2a6#Thread[Finalizer,8,system]##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Plain###application [irj] prt: destroy#
#1.5 #0002A537D2A6005F0000026C00001C4C00046E35C2814813#1247077082383#/Applications/WebApplications#sap.com/irj#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#SKhatkale#12460##n/a##a7cb51e06beb11de8bd70002a537d2a6#SAPEngine_Application_Thread[impl:3]_6##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Plain###application [irj] prt: init#
#1.5 #0002A537D2A60075000002BD00001C4C00046E35C3AD4359#1247077102039#/Applications/Xss#sap.com/tcwddispwda#com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent#SKhatkale#12464##rrisep1p01_EP1_14481150#SKhatkale#b6d348006beb11deb9780002a537d2a6#SAPEngine_Application_Thread[impl:3]_31##0#0#Fatal#1#com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent#Plain###You do not have the authorization to start service sap.com/pcui_gp~xssutils/XssMenu.#
#1.5 #0002A537D2A6007A0000001300001C4C00046E35DDE07029#1247077541575#/Applications/WebApplications##com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Guest#0##n/a##cf997d306af811dec69d0002a537d2a6#Thread[Finalizer,8,system]##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Plain###application [irj] prt: destroy#
#1.5 #0002A537D2A600650000024600001C4C00046E36B6DBE4D0#1247081181950#/Applications/WebApplications#sap.com/irj#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Administrator#12873##n/a##37e186606bf511de8bf20002a537d2a6#SAPEngine_Application_Thread[impl:3]_0##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Plain###application [irj] prt: init#
Please let me know if anybody has come across such scenario before.
Thanks
Suhas
Edited by: Suhas Khatkale on Jul 8, 2009 10:09 PM

Hi,
This issue is now resolved. We followed up with SAP and they suggested to update the component EP-PSERV to latest patch which was earlier to patch 1. Later on we upgraded it to patch 4 and this resolved the issue.
Thanks
Suhas

I can not get iPhone and iPad calendar to sync. Help

Help. I can not get iPad and iPhone calendar to sync

Please also check, if the appointments you already have entered on one device are stored in a iCloud calendar or only local or in another account. Therefor just open the calendar app, then open an existing appointment, click on "Calendar" and then check, if it is really an iCloud calendar where the appointment is stored.

I-pod touch is not getting sync and the error message is coming as "i-tunes couldn't connect to i-tunes store. An unknown error occurred (-3212).

Hi
My i-pod touch is not getting sync and the error message is coming as "i-tunes couldn't connect to i-tunes store. An unknown error occurred (-3212).
I have updated the latest OS 6.0 in my i-pod touch.
Kindly send the solution
Regards
Deepak
<Email Edited By Host>

Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?
Also, you are not addressing Apple here. We are all just users like yourself.

Process not getting correlated and going into manual recovery stage

Similar Messages

Maybe you are looking for