Call transaction MMBE from another program and press Back button

Hello,
I have program that is used as a 'launch pad' for some of our heavily used transactions. When I call the main 'launch pad' program, the user will select a button and a Call Transaction MMBE is initiated (USING the first screen). The user selects a material for display and presses the execute button (F8). The material overview is displayed correctly. When the user presses the Back button (F12), transaction returns all the way back to the first called program and not to the first screen for transaction MMBE as expected.
Does anyone know how I can change the screen flow and go back to the fist screen of MMBE and not the screen of the first called program?
Regards,
RC

Rod,
In your case i think it is not possible as it is standard functionality by SAP.
Try work around, may be modification to the program will work.
Regards,
Amey

Similar Messages

CALL TRANSACTION 'ME33K from another program

Hi,
I ma trying to CALL TRANSACTION 'ME33K from another program, but it is not working. The transactions is opening, but it is not opening with the contract number (ls_ekpo-ebeln) i am passing.
ls_ekpo-ebeln does have a valued when CALL TRANSACTION 'ME33K is called.
In debug, I noticed the "value" is blank when step into CALL TRANSACTION 'ME33K .
   WHEN 'EBELN'. "Contract
      l_field = 'EVRTN'.
     IF ls_ekpo-ebeln <> ''.
        GET PARAMETER ID 'VRT' FIELD l_field. "EVRTN.
       SET PARAMETER ID 'VRT' FIELD ls_ekpo-ebeln.
       CALL TRANSACTION 'ME33K AND SKIP FIRST SCREEN.
        SET PARAMETER ID 'VRT' FIELD ls_ekpo-ebeln.
      ENDIF.
Any help or suggestions would be great.
Thanks,
Naing

Dear Naing,
I execute the same code
IF ls_ekpo IS INITIAL.
GET PARAMETER ID 'VRT' FIELD LS_EKPO.
SET PARAMETER ID 'VRT' FIELD ls_ekpo.
CALL TRANSACTION 'ME33K' AND SKIP FIRST SCREEN.
SET PARAMETER ID 'VRT' FIELD ls_ekpo.
ENDIF.
And it is working.
Try to do de simple sintax.
A program with one pararmeter to introduce the contract number.
The set parameter for this parameter and the call transaction.
I´m waiting your comments.
Regards.
Antonio.

How to call an alv report from another program and return back

     Hello ,
I am calling one abap program (Prgm B) from another program (Prgrm A).
Here, Prgm B is an ALV report. I have fetch some data from Prgem B that gets stored in an internal table.
Now, I am using below code in Prgrm A,
SUBMIT Prgrm B VIA SELECTION-SCREEN
                      WITH SELECTION-TABLE rspar
                      EXPORTING LIST TO MEMORY
                      AND RETURN.
When Prgrm A executed, it lead me to selection screen of Prgrm B and when I click F8, it shows me the report output, In short, it doesnt return back to Prgrm A. It ends up showing me the alv report if Prgrm B even afetr using RETURN statement.
I want to get back to Prgrm A by fetching some data from Prgrm B.
Please let me know, if i am missing something.
Regards,
Seema

Hi Seema,
Refer below code.
DATA: v_matnr LIKE mara-matnr.
DATA: t_listobject TYPE abaplist OCCURS 0 WITH HEADER LINE.
DATA: t_mara TYPE mara OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF t_ascilist OCCURS 0,
         line(200).
DATA: END OF t_ascilist.
data var(3) type c.
SELECT-OPTIONS: s_matnr FOR v_matnr.
var = ' 3'.
START-OF-SELECTION.
   SUBMIT ztestaks1 WITH s_matnr IN s_matnr EXPORTING LIST TO MEMORY
   AND RETURN.
   CALL FUNCTION 'LIST_FROM_MEMORY'
        TABLES
             listobject = t_listobject
        EXCEPTIONS
             not_found = 1
             OTHERS     = 2.
   IF sy-subrc <> 0.
     MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
             WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
   ELSE.
     CALL FUNCTION 'LIST_TO_ASCI'
*     EXPORTING
*       LIST_INDEX               = -1
*       WITH_LINE_BREAK          = ' '
       TABLES
         listasci                 = t_ascilist
         listobject               = t_listobject
       EXCEPTIONS
         empty_list               = 1
         list_index_invalid       = 2
         OTHERS                   = 3.
     IF sy-subrc <> 0.
       MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
               WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
     ELSE.
       WRITE:/ 'Below are the lines from the submitted program.'.
       LOOP AT t_ascilist.
         WRITE:/ t_ascilist-line.
       ENDLOOP.
       SKIP 2.
     ENDIF.
   ENDIF.
   IMPORT t_mara FROM MEMORY ID 'T_MARA'.
   WRITE:/
'Here is the output from the table exported from the submitted program.'
   LOOP AT t_mara.
     WRITE:/ t_mara-matnr.
   ENDLOOP.
Submitted program
REPORT ZTESTAKS1.
DATA: v_matnr LIKE mara-matnr,
       v_maktx LIKE makt-maktx.
DATA: t_mara TYPE mara OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF t_makt OCCURS 0,
         matnr LIKE makt-matnr.
DATA: END OF t_makt.
SELECT-OPTIONS: s_matnr FOR v_matnr,
                 s_maktx FOR v_maktx.
START-OF-SELECTION.
   SELECT matnr INTO TABLE t_makt
                FROM makt
               WHERE matnr IN s_matnr
                 AND maktx IN s_maktx.
if not t_makt[] is initial.
   SELECT * FROM mara
            INTO TABLE t_mara FOR ALL ENTRIES IN t_makt
           WHERE matnr = t_makt-matnr.
endif.
   EXPORT t_mara TO MEMORY ID 'T_MARA'.
   WRITE:/ 'This list is from the submitted program'.
   SKIP 1.
   LOOP AT t_mara.
     WRITE:/ t_mara-mtart.
   ENDLOOP.
Hopes this helps you.
Thanks,
Ashok.

How To call a Tcode From a Program and returning back ?

Dear All,
I have a requirement, i have to show all the open orders as in the the tcode va05 and return back to the my program. so how to display the tcode and getting back to my program. please help?

Hi,
Basic syntax to call the transaction is:
SET PARAMETER ID <id name> FIELD <filedname>.
CALL TRANSACTION <TCOde> AND SKIP FIRST SCREEN.
If your are using ALV then snippet is :
FORM user_command USING okcode    LIKE sy-ucomm
                       lselfield TYPE slis_selfield.
CASE okcode.
    WHEN '&IC1'. " SAP standard code for double-clicking
      CASE lselfield-sel_tab_field."check if double click is only on
        WHEN 'ITAB-AUFNR'."aufnr not on any other field
          SET PARAMETER ID 'ANR' FIELD lselfield-value.
          CALL TRANSACTION 'IW32' AND SKIP FIRST SCREEN.
      ENDCASE.
ENDCASE.
Endform.
Pooja

Call transaction LM05 from Z program

Hi,
I need to call transaction LM05 from a Z program, and when LM05 finishes then continue with the process in Z program. But when i use CALL TRANSACTION 'LM05' the process does not return to program Z, when LM05 finishes,it returns to main screen of 'LM05' but not Z program.
I change CALL TRANSACTION by SUBMIT zrlmob001 AND RETURN, but it happens the same, because transaction 'LM05' continuosly evaluates the system variable SY-TCODE, and therefore SY-TCODE contains code transaction 'ZXX'.
it exists a way to call a LM05 transaction from Z program, and then continue in z program after LM05 finishes?
can i create a user exit screen for transaction LM05 and use the user exit to continue with the process that i wish in Z program after call transaction 'LM05'?
I'm in SAP version ECC 6.0.
Thanks in advance
Alejandro

Hi,
I want to share how i resolved this topic:
I searched for user exit, badi and did'nt find a correct way to solved this issue. Also, i tried to create a screen exit for transaction LM05, but the dynpro 2100 of program SAPLLMOB is used for transaction LM02, LM03, LM05 and for each one show a diferent initial screen, this logic cannot be suplied with my custom screen.
Finally, how the final option, i used a enhancement implementation to add code in SAP standard program RLMOB001, and the problem was resolved. i am in version SAP ECC6.0, in this version is posible to create enhancement implementation, and for support package and upgrade, SAP will not overwrite your custom code.
Regards,
Alejandro.

Calling a report from another program

Hi friends,
I want to run an existing report from one function module and I need the output in an internal table for further processing.But I don't want to change the called program for any export to memory.How can we do it ?
Thanks in advance,
Joby

Hi,
U can do by using
SUBMIT PROGRAM VIA SELECTION-SCREEN .
Bye

Error when calling a form from another program

Hi all,
I'm using the following code in EXIT_SAPLV50Q_001:
PERFORM STATIC_CREDIT_CHECK(SAPLVKMP)
USING '' LIKP-KKBER LIKP-KNKLI '' 'X'
CHANGING RC_CHECK_A RC_CHECK_F RC_WARNING RC_ERROR RC_STATUS_SET CMPSA
I'm getting the following error:
GETWA_NOT_ASSIGNED - Field symbol has not yet been assigned in line LOCAL: XVBKD-PRSDT which is in FORM MESSAGE_EXCEEDED_VALUE.
I have assigned a value for field XVBKD-PRSDT so it won't be initial, but this was not helpful.
Any ideas would be appreciated.
Hagit

Hi guest,
the data definition is:
DATA: XVBKD LIKE VBKDVB OCCURS 0 WITH HEADER LINE.
the assignment:
XVBKD-PRSDT = likp-erdat.
Thanks,
Hagit

Problem regarding calling a program from another program

Hi,
I have a requirement that i need to call a program from another program and in that case the called program should be executed with a value in the selection screen coming from the first program..i.e.
a standard report to view the user Notes for annual leave is RPTARQDBVIEW. Can we create a report to display all the users under a manager as a hyperlink and run the report(RPTARQDBVIEW), with the pernr of the employee selected
Regards,
saumik

Submitting a report using ranges for select-options
* Define range for ltak-tanum
RANGES: r_tanum FOR ltak-tanum.
* Read values from database tabel into the range
* These values are later used for select-options in the report
SELECT * FROM ltak
WHERE lgnum = w_lgnum AND           "Warehouse number/complex
        vbeln = w_screen1000-io_vbeln.      "Transfer order number
MOVE ltak-tanum TO r_tanum-low.
MOVE 'I' TO r_tanum-sign.
MOVE 'EQ' TO r_tanum-option.
APPEND r_tanum.
ENDSELECT.
* Submit report with range
SUBMIT zmm00100 WITH p_tanum IN r_tanum.
or
Submitting a report from ABAP with selection criterias
TYPES: tt_selection TYPE STANDARD TABLE OF rsparams.
DATA: l_iblnr        TYPE st_iblnr,
*     Define internal table and work area for select-options
        l_selection    TYPE rsparams,
        li_selection   TYPE tt_selection.
* Create selectIon table
LOOP AT gi_iblnr INTO l_iblnr.
    CLEAR l_selection.
    l_selection-selname = 'IM_IBLNR'.    "Option name
    l_selection-kind     = 'S'.           "S= select options P=Parameters
    l_selection-sign     = 'I'.           "Sign
    l_selection-option   = 'EQ'.          "Option
    l_selection-low      = l_iblnr-iblnr. "Value
    APPEND l_selection TO li_selection.
ENDLOOP.
* Submit report
SUBMIT rm07idif WITH SELECTION-TABLE li_selection AND RETURN.
Regards,
Prabhudas

Set the parameter in the selection screen of a program from another program

Hi ALL,
I need to call the program RHALESMD from another program and the program RHALESMD takes from date as one of the input parameter.how do i set the from date from the calling program and call RHALESMD
Thanks
Bala Duvvuri

i got the answer
Program accessed
REPORT report1.
DATA text TYPE c LENGTH 10.
SELECTION-SCREEN BEGIN OF SCREEN 1100.
SELECT-OPTIONS: selcrit1 FOR text,
                  selcrit2 FOR text.
SELECTION-SCREEN END OF SCREEN 1100.
Calling program
REPORT report2.
DATA: text       TYPE c LENGTH 10,
      rspar_tab TYPE TABLE OF rsparams,
      rspar_line LIKE LINE OF rspar_tab,
      range_tab LIKE RANGE OF text,
      range_line LIKE LINE OF range_tab.
rspar_line-selname = 'SELCRIT1'.
rspar_line-kind    = 'S'.
rspar_line-sign    = 'I'.
rspar_line-option = 'EQ'.
rspar_line-low     = 'ABAP'.
APPEND rspar_line TO rspar_tab.
range_line-sign   = 'E'.
range_line-option = 'EQ'.
range_line-low    = 'H'.
APPEND range_line TO range_tab.
range_line-sign   = 'E'.
range_line-option = 'EQ'.
range_line-low    = 'K'.
APPEND range_line TO range_tab.
SUBMIT report1 USING SELECTION-SCREEN '1100'
               WITH SELECTION-TABLE rspar_tab
               WITH selcrit2 BETWEEN 'H' AND 'K'
               WITH selcrit2 IN range_tab
               AND RETURN.
Thanks
Bala Duvvuri

I have to select a file – get Info – and change – open with and change from preview to another program and CHANGE ALL everytime I boot up

Why do I have to select a file – get Info – select – open with – and change from Preview to another program and click CHANGE ALL with every file extention everytime I boot up.

Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -Rh $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
The first step should give you usable permissions in your home folder. This step will restore special attributes set by OS X on some user folders to protect them from unintended deletion or renaming. You can skip this step if you don't consider that protection to be necessary.
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
resetpassword
That's one word, all lower case, with no spaces. Then press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

How do I reinstall Adobe Acrobat XI Pro from the Creative Cloud? I was deleting another program and accidently deleted Acrobat.

How do I reinstall Adobe Acrobat XI Pro from the Creative Cloud? I was deleting another program and accidently deleted Acrobat.

Sweetmelissa63 for information on how to reinstall Adobe Acrobat XI Professional please see CC desktop lists applications as "Up to Date" when not installed - http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html.

Problem with call transaction MMBE

Hello,
I need to make a call to the transaction MMBE from within my Z program. This is the code that I have written for it:
WHEN 'STOCKOVW'.
      SET PARAMETER ID 'MAT' FIELD line_rec-matnr.
      SET PARAMETER ID 'WRK' FIELD line_rec-werks.
      CALL TRANSACTION 'MMBE' and SKIP FIRST SCREEN.
ENDCASE.
When I try to branch to MMBE, I get the error "The material does not exist or is not activated'. Upon debugging I noticed that the material is not getting filled up in the MMBE screen. The data element corresponding to the screen field has the parameter ID MAT and line_rec-matnr has a valid value.
Could someone please tell me what is going wrong here and how I can correct it?
Thanks,
Rugmani

Hi Rugmani,
<li> You used SET PARAMETER ID. There should be GET PARAMETER ID in MMBE transaction. The program for MMBE is RMMMBESTN. Use global search to find whether GET PARAMETER ID has been used in the program or not.
<li>If you find *GET PARAMETER ID in MMBE, check whether ine_rec-matnr has value or not when SET PARAMETER ID 'MAT' FIELD line_rec-matnr. is executed.
<li>I have searched for the same in ECC 6.0, I found GET PARAMETER ID in the include RMMMBENFF. Check the below one
*&      Form RETTE_SPA_GPA
*     Parameter-ID's, die innerhalb des Prg's umgesetzt werden und auch
*     auf dem Selektionsbildschirm ziehen, müssen vor dem Umsetzen
*     gerettet und nach dem Aufruf der entspr. Umfeldfunktion wieder
*     zurückgesetzt werden
FORM rette_spa_gpa.
GET PARAMETER ID 'MAT' FIELD matnr_spa_gpa. "Material
GET PARAMETER ID 'WRK' FIELD werks_spa_gpa. "Werk
GET PARAMETER ID 'LAG' FIELD lgort_spa_gpa. "Lagerort
GET PARAMETER ID 'LGN' FIELD lgnum_spa_gpa. "Lagernummer note 620654
GET PARAMETER ID 'CHA' FIELD charg_spa_gpa. "Charge
* JH/4.0A/30.10.97 Int. Meld. 3484704 (Anfang)
GET PARAMETER ID 'EKO' FIELD ekorg_spa_gpa. "Einkaufsorganisation
* JH/4.0A/30.10.97 Int. Meld. 3484704 (Ende)
* tga / note 198614 wrong MRP area from sl-level / start
GET PARAMETER ID 'BERID' FIELD berid_spa_gpa.
* tga / note 198614 wrong MRP area from sl-level / end
GET PARAMETER ID 'KUN'   FIELD kun_spa_gpa.
* tga / note 205042 wrong SPA/GPA for MB51 / end
* tga / note 323951 wrong SPA/GPA for MB51 / start
GET PARAMETER ID 'BES'   FIELD ebe_spa_gpa.
GET PARAMETER ID 'AUN'   FIELD kda_spa_gpa.
* tga / note 323951 wrong SPA/GPA for MB51 / end
ENDFORM.                    " RETTE_SPA_GPA
Thanks
Venkat.O

Query about Calling One Form from Another using Personalization

Hi All,
I have created a Custom form using TEMPLATE.fmb and created functions in Apps and assigned to Responsibility etc and it all works OK.
Now, I need to call this Custom form from another seeded(PO form) Via Tools -> Menu.
using Forms personalization I can get the Menu Entry and Actions to execute the Form successfully from the PO Form.
BUT, I need it to automatically query records in my CUSTOM form based on my current PO_HEADER_ID value on my PO Form.
How can I do it ?
Do I need to modify my Block and add some parameters and then pass a value via Personalization ?
Please help !
Thanks
Shankar

Hi Shankar,
Please refer my article on metalink
Zoom to AR Transactions and AR Receipts Form from Collections Form using Forms Personalization - Doc ID: 430643.1
This article explains how to open the AR transactions form from another form. When it opens the form it automatically queries for the Invoice number of the calling form. You should be able to use this logic for your requirement.
Hope this helps.
Thanks,
Anil

Calling one form from another

hi im trying to open another form from an exixting form by clicking on a button.
so i hae used the when button pressed trigger and inserted:
open_form(customerform);
it has complied fine but when i run the form and press thr button this error comes u
FRM.40010: cannot read from customerform
can i resolve this problem?
pls help
thanx in advance

hi all,
in some application, i use forms90_path in registry and copy the value in it into default.env ( i work at Developer Suite 10g), and running well.
My problem if i fix this way ( not use call_form('Path\form.fmx'....) is
if there the same file on 2 path, the file called sometimes incorrect.
ex :
path 1 = c:\a
path 2 = c:\b
file coba.fmx is included both of path
on regestry : c:\a;c:\b
when i run application which is in path 2 and call the file coba.fmx, why the return on form is file coba.fmx on path 1 ?
is there any setting for solving it ( except give that file in a different name ) ?
i need advise :)
thank you very much
Best Regards,
Salim
Beginner Programmer

Call SXPG _ CALL _ SYSTEM from ABAP program

Hi,
Someone may help me? I need to call the function module SXPG _ CALL _ SYSTEM from ABAP program for to encrypt a file.
I created the command by SM49 , but I don't know how I can call it from ABAP program.
Thanks
Maria C

Hi Maria.
This is a possible code you can use:
DATA: log LIKE TABLE OF btcxpm WITH HEADER LINE.
Can contain STDOUT, STDERR
commandname =
CALL FUNCTION SXPG_CALL_SYSTEM
IMPORTING
COMMANDNAME = commandname
PARAMETERS = parameters
EXPORTING
STATUS = status
TABLES
EXEC_PROTOCOL = log
EXCEPTIONS
NO_PERMISSION = 1
COMMAND_NOT_FOUND = 2
PARAMETERS_TOO_LONG = 3
SECURITY_RISK = 4
WRONG_CHECK_CALL_INTERFACE = 5
PROGRAM_START_ERROR = 6
PROGRAM_TERMINATION_ERROR = 7
X_ERROR = 8
PARAMETER_EXPECTED = 9
TOO_MANY_PARAMETERS = 10
ILLEGAL_COMMAND = 11
OTHERS = 12.
The following are the comments of the parameters taken from:
http://help.sap.com/saphelp_40b/helpdata/en/fa/0971ee543b11d1898e0000e8322d00/content.htm
Parameters
IMPORTING Parameters
Parameter name
Use
COMMANDNAME
The name of the definition of the external command, as specified in the maintenance function (transaction SM69).
PARAMETERS
Arguments for the external command as specified by the definition in the R/3 System and by the calling program or user.
These arguments are checked for impermissible characters, such as the ; under UNIX. Problems are registered with the SECURITY_RISK exception.
EXPORTING Parameters
Parameter name
Use
STATUS
Returns the final status of the execution of the external command:
· Value O: The external command was started and ran to end successfully.
· Value E: An error occurred; the external command was not run successfully.
Tables Parameters
Parameter name
Use
EXEC_PROTOCOL
Contains the STDOUT and STDERR output of the external command and any output from the target host system.
Exceptions
Exception name
Meaning
X_ERROR
Reserved for future use.
NO_PERMISSION
The AUTHORITY-CHECK of the users authorization for the authorization object S_LOG_COM failed. The user is not authorized to carry out the command named with the specified arguments on the target system.
COMMAND_NOT_FOUND
Command name, as identified by COMMANDNAME and OPERATINGSYSTEM, has not been defined in the maintenance function (transaction SM69).
PARAMETERS_TOO_LONG
The combined argument string (ADDITIONAL_PARAMETERS and the DEFINED_PARAMETERS, as returned in ALL_PARAMETERS) exceeds the limit of 128 characters in length.
SECURITY_RISK
Either:
· The command contains impermissible characters. These are characters with potentially dangerous properties, such as ; under UNIX.
· The command definition specifies that an extra-check function module be run. This function module has rejected execution of the command.
WRONG_CHECK_CALL_
INTERFACE
The command definition specifies that an extra-check function module is to be run. Either this function module is missing, or the interface defined for this function module does not match that of the standard R/3 function module SXPG_DUMMY_COMMAND_CHECK. For more information, please see SXPG_DUMMY_COMMAND_CHECK: Interface for Extra-Check Function Modules.
TOO_MANY_PARAMETERS
The command definition specifies that user-specified arguments for the external command are not allowed. However, an additional string of command arguments was specified.
PARAMETER_EXPECTED
The command definition includes the placeholder character ?, which signifies that additional user-defined arguments are required. However, no additional arguments string was supplied.
PROGRAM_START_ERROR
An error occurred while starting the external command. The R/3 system field SY-MSGV1 contains additional information on the problem.
PROGRAM_TERMINATION_
ERROR
An error occurred while trying to obtain the return code of the external program. The R/3 system field SY-MSGV1 contains additional information on the problem.
ILLEGAL_COMMAND
The external command definition was modified "illegally". That is, the command was not modified by means of the maintenance function (transaction SM69).
The modified command is registered in the system log in its substituted form. The message is registered under the system log ID "LC".
OTHERS
Catch any new exceptions added to this function module.
Hope this will be useful.
Sandro Lombardo

Call transaction MMBE from another program and press Back button

Similar Messages

Maybe you are looking for