Calling a report from a from 10g 1.2

Hi my friends.
how a re you ?
please i need ur help here
i have installed oracle 10g 1.2 on my machine, the database and the AS in the same computer. i have problem which is i'm trying to call the report attached to the form using a push button on the form, it gave ma the frrm-41213 which is unable to connect the rep server, i dont know what is the problem !
i start up the report serevr useign rwserver server=repserv
and it gave me a msg that it is started in a ddition to the OC4J instance!
this is the code i use to call the report, hope you will help me its really important,,,
plz email me if you have any comments about it or have any good sample i can use to solve this problem, [email protected]
thank you
declare
     vREP_OBJ     REPORT_OBJECT;
     v_Report_path VARCHAR2(1000);
     vREP_SERVER     VARCHAR2(20);
     vREP_JOB_ID     VARCHAR2(100);
begin
     V_Report_path := 'D:\';
     vREP_SERVER :='repserv';
     vREP_OBJ := FIND_REPORT_OBJECT('REPORT9');
     SET_REPORT_OBJECT_PROPERTY(vREP_OBJ, REPORT_EXECUTION_MODE, BATCH);
SET_REPORT_OBJECT_PROPERTY(vREP_OBJ, REPORT_COMM_MODE , SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(vREP_OBJ, REPORT_DESTYPE, cache);
SET_REPORT_OBJECT_PROPERTY(vREP_OBJ, REPORT_FILENAME , v_Report_path);
SET_REPORT_OBJECT_PROPERTY(vREP_OBJ, REPORT_DESFORMAT , 'PDF');
SET_REPORT_OBJECT_PROPERTY(vREP_OBJ, REPORT_SERVER , vREP_SERVER);
     vREP_JOB_ID := RUN_REPORT_OBJECT(vREP_OBJ);
     WEB.SHOW_DOCUMENT('/reports/rwservlet/getjobid'||vREP_JOB_ID||'?server='||vREP_SERVER,'_top');
end;

Please see the link:
http://www.oracle.com/technology/products/forms/pdf/10g/frm10gsrw10g.pdf

Similar Messages

Call Oracle Reports from Forms ver 9i or 10g

Hi,
Can somebody guide me, how to call Oracle Reports from the Oracle form 9i,
Run_product is no more available into 9i & 10g, Run_report_object is not working with out put type "Screen" or "preview".
What is the best way to call the reports from the form ??? pls help...
Thanks in avdance.
Jitesh ([email protected])

You can use RUN_REPORT_OBJECT with CACHE type, and WEB.SHOW_DOCUMENT to view the document on the screen.
In the Forms help you should find examples.
If you have access to Metalink, have a look at Note:207396.1.

Calling a Report from Form in 10g

Hi all,
I am very new to Oracle Form builder, I wana to call a report from a Form.
we are using Oracle 10g Developer suit.
Can any body please help me regarding on this?
Regards
Tanmaya Pradhan(Tam)

..or
Take a look at
Re: Run Report10g Through form 10g

Calling a report from a report (10g)

Hi
I am using DeveloperSuite 10g and Application Server 9.0.4 - I am trying to call a report from another report.
I believe I am correct in thinking that as buttons don't exist in reports any more I have to use a hyperlink containing the URL to the reports service with appropriate parameters to invoke the required report.
My problem is that when I click on the hyperlink I do not see the called report, but get an html screen saying "Oracle Report Status - Successfully run".
My hyperlink is formed like this:
/reports/rwservlet?module=reportb.rdf
Is there an additional parameter I must pass to get the report to display on the client browser window?
Thanks

Hi,
Can someone let me know as to what the maximum length of the URL string that could be formed? I believe in IE browser a maximum of 64,000 characters can only be formed. If I need to pass many parameters and the length of the values passed exceeds the default length in IE, the rest of the values will not be captured in the report server.
Please let me know on how to proceed with this problem.

Calling a report from oracle form 10g

how to call a report from oracle form 10g

Please see the link:
http://www.oracle.com/technology/products/forms/pdf/10g/frm10gsrw10g.pdf

URGENT!!! calling crystal reports from oracle forms 10g

Is it possible to call crystal reports from oracle forms 10g?
Can someone help to answer how, if there is a solusion, to call crystal reports from oracle forms 10g.
Please provide codes with details showing step by step.
Thanks

hi
try something like this.
DECLARE
charWinHandle VARCHAR2(50);
numWinHandle NUMBER;
BEGIN Set_Application_Property(Cursor_Style,'BUSY');
charWinHandle := Get_Item_Property('Control.Rep',Window_Handle);
numWinHandle := To_Number(charWinHandle);
:Item('Control.CrystalReport1').OCX.Crystal.Crysta lReport.WindowParentHandle
:= numWinHandle;
:Item('Control.CrystalReport1').OCX.Crystal.Crysta lReport.WindowState := 2;
:Item('CONTROL.CRYSTALREPORT1').OCX.Crystal.Crysta lReport.Connect
:= 'DSN=;UID=' || Get_Application_Property(UserName) ||
';pwd=' || Get_Application_Property(password) || ';dsq=;';
Crystal_CrystalCtrl.ReportFileName( :Item('Control.CrystalReport1').interface,
'C:\Sample_Rep.Rpt' );
Set_Window_Property( Forms_Mdi_Window, Window_State,Maximize );
Set_Window_Property( 'MAIN', Window_State, Maximize );
:reptitle := 'Report Preview Window';
numWinHandle := Crystal_CrystalCtrl.PrintReport( :Item('Control.CrystalReport1').interface );
Set_Application_Property(Cursor_Style,'DEFAULT');
END;NOTE: Change the report name and path according to your required file name and path in
the "Crystal_CrystalCtrl.ReportFileName" method call. Also, the connection string shown
assumes that you will use the current USER and PASSWORD for the Form.
- To make the above Form generic so that you can run any Crystal report from it, then create
a parameter for the report name and pass it to the Form using CALL_FORM from any other Form.
Then just replace the file name with the passed parameter.
-. Run the Form
If its correct/helpful please mark it thanks.
sarah
Edited by: S@R@h on Nov 27, 2009 6:33 AM

Simplest Way 2 Call a report from Forms 10g

Hello,
i am using Oracle 10g & tools 10g too,
What i am trying to do is to call a report from a form...
So one friend told me 2 use a library exists in Folder Forms90 called " rp2rro"on the installed developer10g tools,i am using the following code :
============================================
Begin
PARAM_ID := GET_PARAMETER_LIST(PARAM_NAME);
IF NOT ID_NULL(PARAM_ID) THEN
DESTROY_PARAMETER_LIST('REPORT_PARAMETER');
END IF;
PARAM_ID := CREATE_PARAMETER_LIST(PARAM_NAME);
ADD_PARAMETER(PARAM_ID,'PARAMFORM',TEXT_PARAMETER,'NO');
ADD_PARAMETER(PARAM_ID,'COPIES',TEXT_PARAMETER,:COPIES);
ADD_PARAMETER(PARAM_ID,'P_DISPLAY',TEXT_PARAMETER,:DESTYPE);
ADD_PARAMETER(PARAM_ID,'DESFORMAT',TEXT_PARAMETER,'pdf');
ADD_PARAMETER(PARAM_ID,'P_DATA_TYPE',TEXT_PARAMETER,:PERIOD_MONTH);
ADD_PARAMETER(PARAM_ID,'P_MATERIAL_CODE',TEXT_PARAMETER,:MATERIAL_DESC);
     ADD_PARAMETER(PARAM_ID,'P_DATE_FROM',TEXT_PARAMETER,:DATE_FROM);
     ADD_PARAMETER(PARAM_ID,'P_DATE_TO',TEXT_PARAMETER,:DATE_TO);
     ADD_PARAMETER(PARAM_ID,'MONTH_ID',TEXT_PARAMETER,:MONTH_ID);
     ADD_PARAMETER(PARAM_ID,'FIN_YEAR_CODE',TEXT_PARAMETER,:FIN_YEAR_CODE);
rp2rro.rp2rro_run_product(REPORTS,'Report_name',SYNCHRONOUS, RUNTIME, FILESYSTEM, PARAM_ID, NULL);
END;
The problem is that i am receiving many errors as:
frm-41219:Can't find report invalid id
frm-47023:No such parameter named rp2rroDesformat exist in form my_form_name
frm-40105:Unable 2 resolve reference to item parameter.rp2rrodesformat
can any kind guy help me pls it's urgent i have no time 2 even read a document 4 it pls help me..!!??
Regards,
Abdetu..

Hi Abdetu,
Here is a procedure and simple call of the procedure witch Iam using successfully now.
PROCEDURE INVOKE_REPORT
     url_and_server in VARCHAR2,
     file_name in VARCHAR2,
     des_type in NUMBER,
     des_name in VARCHAR2,
     des_format in VARCHAR2,
     param_list in PARAMLIST
IS
     l_report_id REPORT_OBJECT := FIND_REPORT_OBJECT('QMSREP');
     l_report_job_id VARCHAR2(100);
     l_userid VARCHAR2(200) := GET_APPLICATION_PROPERTY(USERNAME) || '/' ||
     GET_APPLICATION_PROPERTY(PASSWORD) || '@' ||
     GET_APPLICATION_PROPERTY(CONNECT_STRING);
     l_report_url VARCHAR2(200) := substr(url_and_server, 0, instr(url_and_server, ',') - 1);
     l_report_server VARCHAR2(100) := substr(url_and_server, instr(url_and_server, ',') + 1);
     l_vcStatus VARCHAR2(100);
     l_vcJob VARCHAR2(100);
BEGIN
     SET_REPORT_OBJECT_PROPERTY(l_report_id, REPORT_COMM_MODE, ASYNCHRONOUS);
     SET_REPORT_OBJECT_PROPERTY(l_report_id, REPORT_EXECUTION_MODE, RUNTIME);
     SET_REPORT_OBJECT_PROPERTY(l_report_id, REPORT_SERVER, l_report_server);
     SET_REPORT_OBJECT_PROPERTY(l_report_id, REPORT_FILENAME, lower(file_name));
SET_REPORT_OBJECT_PROPERTY(l_report_id, REPORT_DESTYPE, des_type);
     SET_REPORT_OBJECT_PROPERTY(l_report_id, REPORT_DESNAME, des_name);
     SET_REPORT_OBJECT_PROPERTY(l_report_id, REPORT_DESFORMAT, des_format);
     SET_REPORT_OBJECT_PROPERTY(l_report_id, REPORT_OTHER, 'paramform=no userid='||l_userid);
     -- invoke the report (currently we don't use the returned ID)
     l_report_job_id := RUN_REPORT_OBJECT(l_report_id, param_list);
     l_vcstatus := Report_Object_Status(l_report_job_id);
     l_vcJob := substr(l_report_job_id, instr(l_report_job_id ,'_', 1 , 3 ) + 1);
     WHILE l_vcstatus in ('RUNNING','OPENING_REPORT','ENQUEUED')
     LOOP
     l_vcstatus := Report_Object_Status(l_report_job_id);
     END LOOP ;
     if l_vcStatus = 'FINISHED' then
     Web.Show_Document('http://'||l_report_url||'/reports/rwservlet/getjobid'||l_vcJob||'?server='||l_report_server,'_blank');
     else
          message('Failed - Status was :'||l_vcStatus);
     end if;
END;
INVOKE_REPORT ('172.198.1.1:7777,rep_SRV'
                                        ,'MYREP.RDF'
                                        ,cache
                                        ,'htmlcss'
                                        ,l_par_list_id
hope this helps,
Alireza

Calling a report from a report in reports 10g !

Which one is the most easist way of calling a report from a report in Reports 10 g ?
Capri !

Actually the scenario is that I have a report in which suppose a list of names is there. I want another report called on the basis of a name selected by passing that name_id as a parameter to the called report.
In Reports 6i that is easily done by a BUTTON. But i am unable to find a solution here.
Hope its clear now.
Capri !

What is the best way to call a report from within a report

What is the best way to call a report from within a report(master / Detail concept)
A type of drill down report
Oracle Database 10g
Forms 10.1.2.0.2
Report Builder 10.1.2.0.2

Hi
Have a look in this link, certainly you will get fix, if not just post a comment on blog, will get reply soon
http://windows7bugs.wordpress.com/?s=oracle+10g+bug

Can I call a report from pl/sql?

How can I call a report from pl/sql? I would like the output to be pdf and have it outputted to the screen?
We are running Oracle 10g database and 10.1.2.3 application server on LInux Redhat 4.
Thanks.
Shirley
Edited by: jonesfnalgov on Jul 12, 2011 2:17 PM
Edited by: jonesfnalgov on Jul 12, 2011 2:18 PM

Hello,
a package is provided : srwAPIins.sql installs the Event-Driven Publishing API.
http://download.oracle.com/docs/cd/B14099_17/bi.1012/b14048/pbr_evnt.htm
The Event-Driven Publishing API is a PL/SQL package that provides the basic functions required for the development of procedures that respond to events in the database. Event-driven jobs are submitted using the HTTP protocol. The server assigns a unique job_ident record to every call, useful for tracking the status of the job.
Regards

Problem calling a report from Forms

Hi,
I am currently trying to upgrade our Forms and Reports from 6.0 to 10g. I created a simple form and a simple report and I called the report from the form (passing no parameters) and report was generated fine. Now I'm looking at one of our existing forms and I've complied them in 10g. This time I'm passing a parameter and the report is failing. If I run the report on its own with the same parameter it works fine. I am using the Run_report_object builtin.
The error I get is the 41214:Unable to run report. The weird thing about this is if I pass in a bogus parameter (not valid in the database), the report will execute fine and I will get a page saying that No Data was Found (text displays when nothing was returned from the query). However, whenever I pass in a good parameter (Data should be returned), the report do not execute and I get the error. So, I updated the database to have the bogus parameter and then when I passed in the bogus parameter again, this time it failed. So it looks like that when data is coming back from the query in the report, I get the error. I'm connected to the same database that was used in the simple example stated above that returned data.
Does anyone have any idea what could be causing this? Let me know if more information is needed.
Thanks,
Karen

You can check the reports queue for error messages to see what the error actually is.
http://server:port/reports/rwservlet/showjobs?server=repsever

**How to call a report from a form by passing a specfic value?????

Hi Expert,
I want to call a report from a form.My problem scenario like, a user is login to his account and there is a option called ADMIT CARD(Push Button).Now when he pressed the button a report will generate.I want that when he pressed the button the user id of the user will passed to the report and the report will generate corresponding to his details which was stored in the database.This scenario is like any online admit card.
Suppose I want a details report of employee whose employee_id=100.How could I pass this value(employee id) to report which will generate a report details.
Thanks,
TAPAN
Message was edited by:
user630863

Thanks for replying.
Actually I am a beginner.I think that I have to use RUN_REPORT_OBJECT built-in.But I cannot understand the parameterlist.Can u plz give me any example or code then I am very thankful.
Suppose I want a details report of employee whose employee_id=100.How could I pass this value(employee id) to report which will generate a report details.
Thanks,
TAPAN

Calling a report from a form based on procedure

I created a form based on a procedure.
It is a entry form where the user is selecting or enters data then on submit I must display the report based on selected data.
I know I can simply create a report with all bind variable and do the job.
My question is what is the syntax to call the report from the procedure for the selected parameters values.
Thanks
Lawrence

If you want to display other HTML page after successful submission, you need to use
either go or call method.
I created a form on SCOTT.EMP and a report on SCOTT.EMP and the report accept a parameter for
the deptno. Here is my on successfull submission code:
declare
l_dept number;
l_url varchar2(2000);
begin
l_dept := p_session.get_value_as_number('DEFAULT', 'A_DEPTNO', 1);
l_url := 'scott.rpt_mask_1.show?p_arg_names=emp.deptno&p_arg_values='| |l_dept;
go(l_url);
end;
null

How to call a report from a web application

Hi,
I have a web server in wich is installed Reports 6i. My question is how can I call reports 6i to generate a pdf using a .rep file from my web application (built with java)?

Hi,
The below link will be very useful for one who need idea on calling Oracle Report from Java Application,
http://www.oracle.com/technology/products/reports/htdocs/getstart/examples/reportswebservice/index.html
Thanks & Rgds,
M T

How to call a report from a menu ?

I am converting 6i client/server forms to 9i.
I have a menu that has an option on it to run a report for each menu item selected using RUN_PRODUCT.
9i is making this obsolete, so how can I call a report from a menu (not a form) now then ?
In a form it is fine cos I just use the Report Object - a menu does not have this facility.
Thanks in advance.

Hi,
so here is how this should be done:
1. Create a Reports node in the Forms module that uses the menu (you don't have to create one Reports Object for each report that you want to run)
2. From the menu, before calling Run_Report_Object() use Set_Report_Object_Property() to set the phsical file name of the Reports that should be executed. This is kind of best practice and does not have a performance hit.
There is a bug filed against Forms to extend the menu files with a reports Object node. This could require a change to teh file structure which is why we looking for Forms 10i to implement this. (If it turns out that we can have it without recompiling the menu modules then it may go into a patch set - however this seems unlikely from my point of view)
Fran

Calling a report from Form 6i

Hi,
I want to call a report from Form 6i at run time. And I write the following code in When Buttton Press trigger . when I press the button it will gives no response.
declare
     x report_object;
     y varchar2(100);
begin
     x:=find_report_object('billform');
     y:=run_report_object(x);
end;
for more information , path of my report is: C:\REP\billform.rdf
please send me the solution of this problem
E_mail: [email protected]
Shahzad

hi,
now i am using the following code in when button press trigger. if u give me ur e_mail address i will send u FMB and RDF files used for Scott/tiger EMP table for the sample.
declare
repo_Para     ParamList;
BEGIN
repo_Para:=Get_Parameter_List('Report_para');
IF not Id_null(repo_Para) THEN
     destroy_parameter_list(repo_para);
end if;
repo_Para:=Create_Parameter_List('Report_para');
Add_Parameter(Repo_para,'PARAMFORM',TEXT_PARAMETER,'No');
Add_Parameter(Repo_para,'MAXIMIZE',TEXT_PARAMETER,'Yes');
     Add_Parameter(Repo_para,'BDATE',TEXT_PARAMETER,:BLOCK3.a_dptno);
     Add_Parameter(Repo_para,'EDATE',TEXT_PARAMETER,:BLOCK3.b_dptno);
     RUN_PRODUCT(REPORTS,'c:\apu\DDATE.rep', SYNCHRONOUS,
          runtime, FILESYSTEM,Repo_para,NULL);
end;
BDATE & EDATE are two user parameters created in report.
when i press the button in form pass parameters the report will be called but no data will be display but when i directly run reprot from report buider and pass same values of BDATE & EDATE it will show data.
please give me ur e mail address or help me for this problem
best regards,
shahzad

Calling a report from a from 10g 1.2

Similar Messages

Maybe you are looking for