Calling a Taskflow present in one App using a url from another Application

Hi,
I a have a requirement to call a taskflow present in another Application using a url from present JDEV Application.
Is that possible in JDEV 11g? Can anyone give me an example.
Thanks,
User
Edited by: user617801 on Feb 24, 2009 11:24 AM

Hi,
Check out this example . It is for TP4, but it should be the same on WLS.
Pedja

Similar Messages

Can I restore just one app. using the Install disc, or must all items be restored?

Can I selectively restore just one app. using the Install disc, or will all items be automatically restored?

Thanks BDAqua;
This is my first time using the forums, so I am not certain about protocol. However, your quick reply is appreciated.
miltc
BDAqua wrote:
Hi , and a warm welcome to the forums!
Get Pacifist...
http://www.charlessoft.com/
then extract/install what you need from your Install Disc.

Applications are mentioned free, but when we start downloading one dollar is charged in my credit card, but only for the first time when i switch on and use it for the first time one dollar is charged. and from next application it is free. why?

Applications are mentioned free, but when we start downloading one dollar is charged in my credit card, but only for the first time when i switch on and use it for the first time one dollar is charged. and from next application it is free. why?

Kindly inform any email id or toll free number to contact apple for your below answer, Mr.King_Penguin
About receiving my credit card being debited for Free App Store Application downloads,
It should be within a few days, but it might vary a bit by bank/provider :
I am in India, if the bank don't refunds , what to do?
Rajagopal.pngr :- It is only a holding charge, it is not a permanent charge. If it isn't refunded within a few days or so (and it quite possibly won't be over a weekend) then you can query the charge with Apple.

Calling a bounded task flow (that uses fragments) from another application

Hello,
I'm currently having difficulties calling a task flow located inside another application.
I have application Console which is my main application in which I would like to run other applications within. Inside this Console I have it divided into splitter windows and inside them I have regions. My goal is to be able to call a task flow from another application inside one of these regions but so far I'm having no luck.
My first problem occurred when I created a 'local' task flow to make a call to another application's task flow. When I set the properties to the task flow call, it gave me an error that it could not find the .XML file for that task flow when I ran the Console application. I then proceeded to copy that .XML from the remote application into the Console's WEB-INF directory and I seemed to get a bit farther. The error I get now is saying that I cannot run a task-flow that uses fragments. It's essentially trying to run that task flow as an entirely new page instead of inside the region that it's bound to. It's NOT a dynamic region (although that's the end goal here). So I then changed the other application's task flow to simply display an entire page rather than fragments inside a region and voila, it works..... kind of.
To recap how I was able to call another application's task flow inside the Console:
- I had to manually copy the task flow xml file into the Console WEB-INF directory
- I had to change the task flow so that it didn't use fragments
- I have called the task flow but I lose my console page entirely, no more regions or splitters so I'm back to square one.
If anybody has any suggestions, hints, tips or anything, send them this way and I will be forever greateful.
Thanks,
Mark

Thanks for your response Frank.
Unfortunately the problem seems to be greater than that. I've been able to package task-flows into a jar library and tried importing them that way with no luck.
I'm simple trying to call an external task-flow to run inside a region which is inside a splitter panel that I call my console.
Any other ideas ?

Best way To get data from another application using NDDE lbrary

My vb.net application gets data from another application using NDDE Library. I got stocks prices (open,high,low,close,volume,change......(about 15 records for each stock)) (about 200 stocks) . I don't know if there is a problem in my code.
This is my code:
l : is the list of stocks.
This Sub connects to server and requests the data :
Public Shared Sub GetQuotes()
Try
client1 = New DdeClient(server, topic)
client1.Connect()
For i As Integer = 0 To l.Count - 1
client1.StartAdvise("QO." & l(i).t & ".TAD$last", 1, True, 60000)
client1.StartAdvise("QO." & l(i).t & ".TAD$open", 1, True, 60000)
client1.StartAdvise("QO." & l(i).t & ".TAD$high", 1, True, 60000)
client1.StartAdvise("QO." & l(i).t & ".TAD$low", 1, True, 60000)
client1.StartAdvise("QO." & l(i).t & ".TAD$pclose", 1, True, 60000)
client1.StartAdvise("QO." & l(i).t & ".TAD$volume", 1, True, 60000)
client1.StartAdvise("QO." & l(i).t & ".TAD$date", 1, True, 60000)
client1.StartAdvise("QO." & l(i).t & ".TAD$time", 1, True, 60000)
Next
Catch ex As Exception
MsgBox(ex.Message)
End Try
End Sub
and then I get the data from Client_advise sub (called each time a value changed )and fill the list. What I know is that client advise gets only one record for single stock each time is called..
Example: for stock AAPL. 1st time enters client_Advise I get open price for AAPL, 2nd time I get high price for AAPL,3rd time I get low price..... and I update the value in the List (l)
This the client_Advise Sub:
Private Shared Sub client1_Advise(ByVal sender As Object, ByVal e As NDde.Client.DdeAdviseEventArgs) Handles client1.Advise
For q As Integer = 0 To l.Count - 1
If l(q).t = w(1) Then
Dim item() As String = e.Item.Split("$")
If l(q).Open = "#" Then
l(q).Open = "0"
End If
If l(q).hi = "#" Then
l(q).hi = "0"
End If
If l(q).lo = "#" Then
l(q).lo = "0"
End If
If l(q).Close = "" Or l(q).Close = "#" Then
l(q).Close = "0"
End If
If l(q).pclose = "#" Then
l(q).pclose = "0"
End If
If item(1) = "open" Then
l(q).Open = Format(Val(e.Text), "0.00")
ElseIf item(1) = "last" Then
l(q).Close = Format(Val(e.Text), "0.00")
ElseIf item(1) = "high" Then
l(q).hi = Format(Val(e.Text), "0.00")
ElseIf item(1) = "volume" Then
l(q).Volume = Val(e.Text)
ElseIf item(1) = "low" Then
l(q).lo = Format(Val(e.Text), "0.00")
ElseIf item(1) = "pclose" Then
l(q).pclose = Format(Val(e.Text), "0.00")
If l(q).pclose <> "" And l(q).pclose <> "#" And l(q).Close <> "" And l(q).Close <> "#" Then
l(q).c = Format(l(q).Close - l(q).pclose, "0.00")
l(q).cp = Format(((l(q).Close - l(q).pclose) / l(q).pclose) * 100, "0.00")
End If
l(q).flag1 = 2
ElseIf item(1) = "date" Then
l(q).Date1 = e.Text
ElseIf item(1) = "time" Then
l(q).Time = e.Text
End If
Exit For
End If
Next
End Sub
Am I doing something wrong which inreases CPU usage to 80 or 90 % ?
Thanks in advance.

Hi MikeHammadi,
According to your description, you'd like to get data from another app using NDDE library.
When using the NDDE library, the CPU usage is high. As the NDDE library is third-party library, it is not supported here. I suggest you checking if the problem is caused by the NDDE library.
If you'd like to get data from another app. I suggest you could save the data in the dataBase, and then read it in another application if necessary.
If you have any other concern regarding this issue, please feel free to let me know.
Best regards,
Youjun Tang
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Calling application form from another application form

hi
I am working on application forms in SAP-ISU. I wanted to call one application form from another application form. Please help me.
Regards,
suresh
[email protected]

Hi,
Suppose there r 2 applications X and Y. There will be 1 programe associated with each applications.
We have to change the programe of 1 application and call 2nd programe in the 1st programe using SUBMIT keyword.
Reward points if useful.
Regards
(YUGANDHAR.P)

Use a method from another class in another package?

How can I use a method from another class in another package?

WhiteJ wrote:
What do you mean by "new keyword?" You posted this previously:
I tried that, it seems to not be working. I want to use the constructor from the other class. I imported it, using this piece of code:
import components.FileChooser;
components.FileChoser();
Typically if I am going to call a constructor on a class called Fubar, I'd use new to create a new object:
Fubar myFubar = new Fubar();Incidently, is it a simple typo in your post or are you trying to use a FileChoser object when it should be FileChooser?

Can i use REALTIME EQUALIZER of AUDIGY from another application? API of AUDIGY?? H

Hi to all,?Can i use EQUALIZER of AUDIGY from another application? need SDK? Help me?For example, VIDEOLAN hasn't a REALTIME EQUALIZER.... i want REALTIME EQUALIZER under VIDEOLAN or other application... can i use API of SOUNDBLASTER AUDIGY from another application and how?

? Isn't the Audigy EQ working 'globally' (meaning, if it's enabled then it effects on all audio outputted through Audigy)?
If you mean programming those API calls into your own software then you'll propably need to dig those functions by 'disassembling' the EQ code (it's maybe not very easy...).
jutapaMessage Edited by jutapa on 05-08-200705:4 PM

Error message Indesign:Either the file does not exist, you do not have read access to it, or use the file in another application.

I've got problem with opening a file in InDesign. The file type is an InDesign Markup Document. The error message is: Either the file does not exist, you do not have read access to it, or use the file in another application. What's wrong?

How to call Oracle form .from another application like VB 6.0

Dear ALL,
I want to call oracle(Developer) form ,from another application (VB 6.0).I want to call the form in such
a way that user dont need to enter login and password.I will hard code the username and password
in my VB 6.0 application.User only press a button on Visual Basic 6.0 form and and that button will
open required Orcale form.How can I DO this.PLEASE HELP............
Regards

You have the command in VB 6.0 to run any exe files right (I think it is the system command). Next to that command place the following code to run your forms application
ifrun60.EXE <forms.fmx with complete path> userid=<username>/<password>@<connection string>.
Regards,
Senthil .A. Perumal.

Modify one image from another application

Is it possibile to call LighRoom from another application, passing a single image to adjust and save back the modifications on the same image (like an usual image editor) ??.
Thanks.

No. Lightroom doesn't work that way. Quite the reverse, actually.
Hal

Can I use a sim from another carrier when traveling overseas?

Can I use a sim from another carrier while in Europe or Canada to enjoy local rates and avoid roaming charges?

If your phone is officially unlocked, yes. Otherwise, no.

Using Time Machine from another machine to restore Library Folders

I am using TM from another machine, (which has died) to restore folders onto a working system, some of the folders i need are in the User Library, but how do i display the User Library in TM?
Thank You
John

Hello,
I have now noticed that the cmd+shift+g method works OK if you are doing a standard restore from the TM on the current system, but does not work when using a TM from another machine. I do not know enough about Unix file structures to specify the correct file under these circumstances, any help woudl be grateful
Thanks
John

Can I read a CWAI in one app, while reading it in another app

We have a system that has 2 applications running simultaneously. A background application uses a thermistor sensor and a heating controller to maintain a certain temperature.
The foreground application needs to read the temperature and graph it. Both applications are written in VB and use a CWAI active-x control to perform the reads. When I try to run them both at the same time, I get an error when I try to start the foreground app the CWAI.start command returns an error stating that the resource is already in use. Is there any way around this? They are running on the same machine.

You can not access the same hardware simultaneously from multiple applications. What you need to do is have one application acquire the data from the hardware and then share the data it acquired with the other application. DataSocket can be used for this and is easy to use. DataSocket is supported in VB with the CWDataSocket control and the "Bindings" property pages on the other controls. For applications running on the same computer, you can also used Windows named pipes (look up "named pipes" in MSDN for more info). Reading/writing named pipes is just like reading/writing files, except that you have to make different calls to open and connect to the pipe.
Hope that helps. Let me know if you still are having problems.
Tony
Measurement Studio

Can you register iPhone on one computer, then use the library from another?

My iTunes store doesn't work on my computer (ive tried to fix it - i think it's a virus on my computer), so what i thought i'd do is register my iPhone through my dads computer, then carry on using the iTunes library from my computer.
Is it possible to register iPhone on one computer, then use the iTunes library from another computer?

.

Calling a Taskflow present in one App using a url from another Application

Similar Messages

Maybe you are looking for