Calling BAPI only ones and receiving all values

HI all,
  I am having a BAPI and I want to receive all the values from the BAPI at the first time.I am having two tables table1 and table2. These tables are inside a Tab(tab strip).
When i click the Tab strip the BAPI fills the first table table1 and based on the lead selection in table1 it calls the BAPI again and fills the second table tab2. But I want to call BAPI only ones when i enter the Tab and show the details from buffer.
It should give the values based on the lead only from webdynpro.
Please help..Its urgent..
Thangs&regards
karthik.

Hi Karthi,
1> Take a Value Node with the necessary attributes to store the BAPI output only once.
2> Inside wdDoint Method:  Execute the BAPI and Copy the BAPI Output to your Value Node.
3>All the data will be available in your ValueNode. Use the Value Node as per your requirement.
Re: RFC Issue - Cardinality and Selection problem
Issue with Table
Regards,
Mithu

Similar Messages

  • Allow only one set of parameter values for all worksheets

    I would like to " Allow only one set of parameter values for all worksheets ", but prompt before executing the worksheet. This function is a great time saver, but the users on occasion would like to change at the least one of the parameters. Is this possible? What setting do I use? I've tried various combinations of the " After opening a workbook: " on the options page. " Run query automatically", " Don't run query (leave sheet empty) ", and " Ask for comformation ". I would have thought that "Ask for comformation " was the trick, but no. I'm considering putting a do nothing parameter that has the setting of " Allow different parameter values for each worksheet. " so that it will keep all the others, default this one, but prompt for a possible change.
    Any thoughts...
    Thanks,
    Jamie

    Hi Jamie
    Even though you have the same parameter for all worksheets a user can still choose what to use on a worksheet. Its just that if they click to another worksheet then that parameter will be applied.
    Which version of Discoverer are you using?
    Best wishes
    Michael

  • Just updated my iphone with iOS 7.0.2 and when I call or people call me, only one party can hear the other. Would you know how to fix this problem? Thanks

    just updated my iphone with iOS 7.0.2 and when I call or people call me, only one party can hear the other. Would you know how to fix this problem? Thanks

    Hi Apple_Mom,
    Thanks for visiting Apple Support Communities.
    If you've noticed issues after updating to iOS 7.0.2, you may want to first update to iOS 7.0.3 which was recently released.
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If the behavior persists, the troubleshooting steps in this article can help:
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    Cheers,
    Jeremy

  • I had my iphone5s in my shorts and my shorts went in the salt water at the beach and was wondering how to fix it or how much is it for another one. Im only 13 and we all make mistakes so please help 18 jan

    I had my iphone5s in my shorts and my shorts went in the salt water at the beach and was wondering how to fix it or how much is it for another one. Im only 13 and we all make mistakes so please help 18 jan

    Sorry, iPhones exposed to Salt Water, are pretty much destroyed. Salt Water is one of the most corrosive elements there is.
    Make an appointment at any Apple store & they will do an out of warranty exchange for US $269.

  • Windows live mail will only send and receive on my...

    Hi there, windows live mail will only send and receive on my sub account but not my default account
    Regards
    Mike,
    Solved!
    Go to Solution.

    MIKETANGO wrote:
    No initial please  an old age pensioner at this end 
    What is WLM?  Windows Live Mail
    Outgoing port 465 does not work only 110 works You need to change the Ports and security settings to those that I posted or your signing into BTMail servers will not be accepted. See the link below.
    incoming port 995 does not work only 25 works As above
    when I use BT Yahoo both accounts work okay
    When I use Windows live mail (which I prefer to use) only second account works but not main account (default account)does not work????
    I have checked out all the other criteria you say.
    I have spent the last 2 weeks with Windows live mail and they say everthing is okay at there end and should resolve this problem with you???
    Have a read through this link and the part about Windows Live Mail and how to change it for BTMail.
    http://bt.custhelp.com/app/answers/detail/a_id/47531/kw/setting%20up%20windows%20live%20mail/c/346,6...

  • Need validation that ensures only one item has a value.

    Hello,
    I need a validation that ensures that only one item has a value. I want to allow a person entering information into a form to have the option to either select from a drop-down or enter something into a text box but not both.
    I have found some information about validation of this type but I'm not sure how to use it. Here is what I found:
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    This validation ensures that only one item (ITEM_1, ITEM_2) has a value.
    Example 5:
    Assume a function similar to the following exists:
    create or replace function sampleValidation (p_arg in varchar2) return boolean
    as
    begin
    if p_arg= '1' then
    return true;
    else
    return false;
    end if;
    end;
    A validation of type PL/SQL Expression could then reference this function returning a boolean using the following syntax:
    sampleValidation(v('MY_ITEM'))
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    Please let me know how to implement this or give me another way to validate.
    Thanks
    Linda

    Linda,
    The best is to use a Validation of type PL/SQL Function Returning Error Text like this:
    BEGIN
       IF :p1_item_1 IS NULL AND :p1_item_2 IS NULL
       THEN
          RETURN 'One of the items must have a value.';
       ELSIF :p1_item_1 IS NOT NULL AND :p1_item_2 IS NOT NULL
       THEN
          RETURN 'Only one of the items must have a value.';
       END IF;
    END;Denes Kubicek
    http://deneskubicek.blogspot.com/
    http://www.opal-consulting.de/training
    http://apex.oracle.com/pls/otn/f?p=31517:1
    -------------------------------------------------------------------

  • How to clear and nullify all values in various controls on a Search Form?

    I have a page with search control mainly comprising of List Box, Text Box and Radio Buttons, I wish to provide user with a 'Clear' Button which should refresh the page and nullify all values user may have filled in the controls. How can I do this?

    Hi,
    Create button.
    And then Create Page Process type of "Session State -> Clear Cache for all Items on Pages (PageID,PageID,PageID)".
    Set process conditionally with your button
    Br, Jari

  • HT4059 I live in Spain and receive all i store products ( books/music ) from the Spanish stores but require English store products How do I change my settings??

    I live in Spain and receive all i store products ( books/music ) from the Spanish stores but require English store products How do I change my settings??

    Settings > Stores (or iTunes and App Store) > Apple ID > View Apple ID > enter password > Country/Region

  • I have to Apple ids in email format--how can I change this to just one and merge all of my existing purchases and apps under one ID?

    I have two apple id's in email format--how can i change this to just one and merge all of my apps and tunes under the one retained ID?

    Sorry Duane..
    Apple does not support the merging of accounts >   Frequently Asked Questions About Apple ID
    messaged edited by cs

  • How to select and print calls only made and receiv...

    how to select and print out list of calls made and received for the past year, between myseld and one particular contact

    While I'm not sure about what you want to accomplish, I'll offer a couple of possible solutions.
    1. If the items that you want to remove are on the timeline, and those items are in layers that contain no content that you want to keep, then you can just select those layers and delete them.
    2. If you want to remove some items from the stage, but keep the original items for some later purpose, just copy the movie and then edit the copy as in item 1.
    3. If you need to remove some items from stage and then resize the stage to compensate for the loss of these items, then you may have to move and/or resize some of the items in your movie. This may be as simple as using the "edit multiple frames" selection in the timeline, or it may be much more time consuming.

  • Problems with my account. How to setup a new one and copy all data in it?

    I've had this Admin account called 'Alex' since my TiBook days. It was on a freshly installed Panther, but for some reason it had a few problems. Just within my own account, that is. My 'Alex' account happened to be the only Admin account; all the other accounts, three in number if I'm not mistaken, were Std accounts.
    Problems I had back then included certain installers not running, or rather starting to bounce and then quitting before doing anything at all. I remember I had to use another account to install Final Cut Express 1.01.
    When I got this new Powerbook I used Migration Assistant when first turning it on, and transfered my home folder using FW cable from the TiBook. Trouble is, the problems I had up to then got transferred, too! For example, now I cannot click on 'Burn' within iDVD5, or the whole thing will collapse (iDVD that is, not the OS!). Also, bought FaxSTF Pro X from Smith Micro, and I can't fax out anything! But, switch to another account on my Powerbook, things are smooth as silk.
    I am contemplating the solution of setting up a new account for me and transferring all my files to that account, then delete my current, problematic one. I want the new account to also be called 'Alex' for short, to have the same long name (my full name, just like my current Admin account). I also would like it if it was possible to copy my Dock configuration, instead of having to re-compose it from scratch. I've got used to using it over the months, and would like to keep it for GUI reasons.
    So, what would be the right order of doing things? Rename my current, bad, account, then create a fresh admin account, then change the ownership and privileges in everything in my home folder and move to the new account, then verify and finally delete my current account? Does all this make sense? Am I setting myself up for some sort of digital tragedy?
    Thanks, people.

    You know, I was thinking if I went ahead and just created a new account, then shipped all my Home folder under the new account and used chown to fix the ownership details, then most likely the problems of my current account would be transferred to the new one.
    How about skipping all .plist files and other preferences? What if I only transferred my actual work documents from all software that I use, plus emails and what have you? Would that tend to minimize the chances of problems re-manifesting themselves in the new environment?

  • Call  RFC from ECC and display the values in  AET

    Hi ALL,
    I had an RFC in ECC ( Z_CRM_SPEC_DATA) this should be called into my AET Fields in getter method.
    In getter method of tat AET field what code should i write?
    Plz help me on this.

    HI,
    1) Call the  RFC(Z_CRM_SPEC_DATA) from ECC and display the values as mentioned in below AET fields.
    AET FIELDS :    zzfld00000M    zzfld00000N
    Description  :    Budget Quan    Forecast Quan
    values         :    (--5.0)(6.0--
    2) (Fetch Budget and Forecast data from ECC ),you would need to pass Material Number(MATNR) as well as Ship to party info to fetch the budget and forecast data as one material may be assigned to 2 or more SH with specific budget and forecast data for each.
    Edited by: venkatabharathv on May 23, 2011 2:44 PM
    Edited by: venkatabharathv on May 23, 2011 2:49 PM

  • Only one signature for all mail accounts very limiting

    while the iphone is a very cool tool, i'm using the iphone for personal and work email,
    and i find it very limiting that there is only one signature possible for all mail accounts.
    standard, we all found out is written "written on my iphone" or something like that.
    i always thought it was very dorky when i read that from blueberry users last year, (as if i'm interested that someone reads and writes his work e-mails from a mobile)
    so, lets stop pretending it is cool to mail from the iphone, but just do it with all functionality it should have.
    like having multiple signatures for example with work signature when i'm working, and personal signatures when not
    meanwhile, can you (apple support) please help me loose less time when i want to erase my work signature every time i want to e-mail personally by adding functionality like "selecting bulk" and "cutting" (and then allowing to copy and paste while you're at it) to your sdk, Pronto please!
    thanks!
    anyone agrees? please follow up. maybe it helps speed up the improvement..

    Once you sync your mail accounts with iTunes the first time, you can turn that off in iTunes. You don't need to do that anymore, unless you make a change to the account. It only syncs the settings. You can reset the sync history after deleting the accounts from your phone and then do another sync. That should correct the problem. I'm not as familiar with Mac computers, but maybe someone with a Mac can help a little.
    Hope this answers your questions.

  • Are international calling plans only one way?

    I just purchased a Skype plan that lets me call landlines and mobiles in the UK. However, I'm anticpating someone from the UK to call me in the USA. Does my subscription allow for this, or it only one way - I can only call phones in the UK?
    Second question: do I need to purchase a separate subscription apart from the one mentioned above to call phones in the USA and answer calls via Skype that originate in the USA?
    Thanks!
    Solved!
    Go to Solution.

    mark1987 wrote:
    1. However, I'm anticpating someone from the UK to call me in the USA. Does my subscription allow for this, or it only one way - I can only call phones in the UK?
    2. do I need to purchase a separate subscription apart from the one mentioned above to call phones in the USA
    3. and answer calls via Skype that originate in the USA?
    Hello and welcome to the Skype Community.
    1. Your contact would need to purchase a Subscription to call you.
    2. Yes. You require the Unlimited USA/Canada Subscription 
    3. Your US contacts can call your Skype Number which you have already purchased.
    TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
    I recommend that you always run the latest Skype version: Windows & Mac
    If my advice helped to fix your issue please mark it as a solution to help others.
    Please note that I generally don't respond to unsolicited Private Messages. Thank you.

  • Own OSX 10.6.8 Snow Leopard. MSOffice 2004 was taken out because of computer repair and now can't find disc to reinstall. But WANT the Office 2004, not Office 2011. Where can I find one and are all Officew 2004 the same

    I own a OSX 10.6.8. IMAC with Snow Leopard. my MSWORD Office 2004 was taken off when computer was repaired and now can't find the disc to reinstall. Do not want the Office2011.. Where do I find the Office 2004 and are all Office 2004 choices the smae.

    Hi Martha - Amazon offers office 2004 on their website.
    http://www.amazon.com/Microsoft-Office-2004-Standard-VERSION/dp/B0001WN0M2
    That will be your best bet if you want to have office 2004 on your computer. Also, there are some different versions want to come to office. The link above gives you the standard version, but there's also the professional version. Now it sounds like that you do not want to upgrade to the latest office because you're most likely comfortable with how 2004 works. So in that case I would not spend the extra money and pay for the professional version unless you really need it. I see on the website there that if you buy a used copy it will only cost you around $10.
    Hope this helps!

Maybe you are looking for