Calling BSP through a JSP button in EP

Hello
Can i call a BSP page from backend and display it into a pop up window using Enterprise portal by clicking on a button...?
Earlier this page is coming by a clicking on teamviewer.mbo
thanx in advance

You can find same help on following forum:
- Publishing BSP Page
Have a nice day,
Nicola

Similar Messages

***How to call BSP App when custom button event fired from toolbar group***

Dear PCUI Experts,
   I have created one custom button for the transaction CRMD_BUS2000116.
And my urgnet requirement is , I need to call BSP application which is used to   take data from custom fields and stores into BP table.
How to call the BSP App. when i clicks on the button.
Please help me..
I will reward with great points.
Regards,
Stella.

Hi Purushothaman,
                             I have created a button in CRRM_ACCOUNT application.
Now i want to call a custom bsp application by clicking on that button.I have followed step given in this blog
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1646. [original link is broken] [original link is broken] [original link is broken] [original link is broken]
But the event is not triggered.Do I have to create an iview for my bsp application?
How to do that?Plz help.
Regards,
Ruby.

How can you securly call discoverer through a form button?

How can you send a user's creditentials securly to discoverer when in forms without using SSO? Is there something similar to calling oracle reports using a cookie to pass the credentials?
Thanks,
Jim

Dr_Chris wrote:
Just looked into the HBH-PV720 which is a Mono headset (version 2.0) whereas the Samsung Star is A2DP (version 2.1) capable, which means that you will need a compatible BT stereo headset in order to stream music to the phone.Hope this helps.
I looked up on Sony Ericsson's products page and found dad's headset.
http://www.sonyericsson.com/cws/products/accessories/compatiblephonesotherbrands/hbh-pv720?cc=gb&lc=...
Then looked at the (Other Brands) Compatible Phones and noticed that Samsung Star (s5230) wasn't included there
Dad's old phone was a W302 and I found it at the compatible Sony Ericsson phones section,which means incompatibility is actually the problem.At least he can use it when driving(which was actually the main reason why I bought him the headset,because I hated it when he drove and held his phone at the same time).
Thanks so much for your replies,I might aswell have wasted my entire day trying to figure out how to fix this,not knowing though what the actual problem was

Insufficient privileges error while calling the seeded page on button click

hi all
I am working on Customers Online module.
I have added a normal button on a standard page through personalization .
The destination for the button is set to call the seeded Create organization page
destination="OA.jsp?OAFunc=XXIIMC_NG_ORG_CREATE&OAHP=IMC_NG_MAIN_MENU&OASF=IMC_NG_ORG_CREATE"
System Admin --> functions --> XXIIMC_NG_ORG_CREATE is a copy of standard function IMC_NG_ORG_CREATE.
It calls the page "OA.jsp?page=/oracle/apps/imc/ocong/party/organization/webui/ImcCreateOrg&HzPuiAddressEvent=CREATE"
When i click on the button i get the error *"You have insufficient privileges for the current operation. Please contact your System Administrator"*
1. The profiles *"FND Function Validation Level"* and *"FND Validation Level"* are set to NONE
2. Bounced apache also.
3. The responsibility Customers Online Superuser is assigned to my user.
We are doing R12 upgrade. The similar functionality is working fine in 11i.
Please let me know what could be the reason of this error and how to correct it.

Hi,
Grant is not given to the create organization page. Ask your DBA for this issue.
Thanks,
Kumar

Calling web service from JSP

Can anyone help??
I'm trying to call a webservice from within a JSP and i havent a clue how its done,
i have my IF and Impl and Client Coded and my stubs generated and service deployed and running, but i cannot figure out how to call the service from my JSP web-app.
Any help appreciated!

Hi ,
Its easy to call a WS from jsp what you can do is this. Think in manner that u will be keeping the client classes on a particular container, then in same container you can refrence the classes and can invoke service through a jsp..this works in my case.. it depends what kind of client do u want to create may be static or proxy or DII

Call .jrxml file from jsp

hi experts,
i created the jasper report file, and i want to call this file through the jsp.
plz help m.
i written the following code but it gives the error:
==code==
<%@ page import="java.sql.*" %>
<%@ page import="java.lang.*" %>
<%@ page import="java.lang.Object" %>
<%@ page import="java.io.*" %>
<%@ page import="java.util.*" %>
<%@ page import="java.text.*" %>
<%@ page import="net.sf.jasperreport.engine.*" %>
<%@ page import="net.sf.jasperreport.engine.util.*" %>
<%@ page import="net.sf.jasperreport.engine.export.*" %>
<%@ page import="net.sf.jasperreports.engine.JasperCompileManager" %>
<%@ page import="net.sf.jasperreports.engine.design.JRMultiClassCompiler" %>
<%@ page import="net.sf.jasperreports.engine.JasperManager" %>
<%@ page import="net.sf.jasperreports.engine.xml.JRXmlLoader" %>
<%@ page import="net.sf.jasperreports.engine.JasperPrint" %>
<%@ page import="net.sf.jasperreports.engine.JasperFillManager" %>
<%@ page import="net.sf.jasperreports.engine.JasperExportManager" %>
<%@ page import="net.sf.jasperreport.engine.JREmptyDataSource" %>
<%@ page import="net.sf.jasperreports.engine.JasperReport" %>
<%@ page import="net.sf.jasperreports.engine.design.*" %>
<%@ page import="net.sf.jasperreports.view.JasperViewer" %>
<%@ page import="net.sf.jasperreports.engine.JRException" %>
<%
     String reportSource ="C:/apache-tomcat-6.0.16/webapps/ROOT/Emp/report/sample.jrxml";
     String reportDest = "C:/apache-tomcat-6.0.16/webapps/ROOT/Emp/report/sample.html";
     Map params = new HashMap();
     try
          JasperDesign jasperDesign=JRXmlLoader.load(reportSource);
          JasperManager.loadXmlDesign("sample.jrxml");
          JasperReport jasperReport =JasperCompileManager.compileReport(jasperDesign);
          JasperPrint jasperPrint =JasperFillManager.fillReport(jasperReport, params, new JREmptyDataSource());
          JasperExportManager.exportReportToHtmlFile(jasperPrint, reportDest);
          JasperViewer.viewReport(jasperPrint);
     catch (JRException ex)
          ex.printStackTrace();
%>
==error==
org.apache.jasper.JasperException: Unable to compile class for JSP:
An error occurred at line: 31 in the jsp file: /Emp/report/rept.jsp
JREmptyDataSource cannot be resolved to a type
28:           JasperDesign jasperDesign=JRXmlLoader.load(reportSource);
29:           JasperManager.loadXmlDesign("sample.jrxml");
30:           JasperReport jasperReport =JasperCompileManager.compileReport(jasperDesign);
31:           JasperPrint jasperPrint =JasperFillManager.fillReport(jasperReport, params, new JREmptyDataSource());
32:           JasperExportManager.exportReportToHtmlFile(jasperPrint, reportDest);
33:           JasperViewer.viewReport(jasperPrint);
34:      }
plz help m.

Error log tells:
JREmptyDataSource cannot be resolved to a typeYou have missed "s" in package name. Instead of:
<%@ page import="net.sf.jasperreport.engine.JREmptyDataSource" %>do:
<%@ page import="net.sf.jasperreports.engine.JREmptyDataSource" %>Thanks,
Mrityunjoy

Phone is frozen in a middle of a call and my top restart button do not work, how can i fix this

phone is frozen in a middle of a call and my top restart button do not work, how can i fix it

Bummer.
Without having the top button, you couldn't do a hard reset.
I'd say you might be looking at backing up and restoring through iTunes unfortunatley.

How to pass PARAMETERS to FORMS while calling them through URL

Hi,
I am working on integrating EBS with OBIEE as per the doc id 552735.1(metalink2)
In the Document, Oracle had given an example for genating the URL in OBIEE as follows,
SELECT
HEADER_ID,
fnd_run_function.get_run_function_url(
CAST(fnd_function.get_function_id('ISC_ORDINF_DETAILS_PMV') AS NUMBER),
CAST( VALUEOF(NQ_SESSION.OLTP_EBS_RESP_APPL_ID) AS NUMBER),
CAST( VALUEOF(NQ_SESSION.OLTP_EBS_RESP_ID) AS NUMBER),
CAST( VALUEOF(NQ_SESSION.OLTP_EBS_SEC_GROUP_ID) AS NUMBER),
'HeaderId='||HEADER_ID||'&pFunctionName=ISC_ORDINF_DETAILS_PMV&pMode=NO
&pageFunctionName=ISC_ORDINF_DETAILS_PMV',
NULL) as ORDER_HEADER_ACTION_LINK_URL
FROM OE_ORDER_HEADERS_ALL
But this one navigates to the JSP page of sales orders. Its working fine,
h3. Problem :_
If i want to navigate to Oracle forms(say Sales Orders),
i'm able to navigate, by giving the 1st param as '5522'(Sales order Form ID(ONT_OEXOEORD)) and 5th parameter as NULL.
The 5th parameter is used to navigate to a particular record.
But i dono how to pass the parameters to this particular Sales Order Form..!
(like here they hav passed HEADER_ID in a particular format)
{I guess, this might not be understood totally with this given data here, but i don want to make this post too big.}
CAN ANYONE PLEASE TELL ME, HOW TO KNOW THE FORMAT OF THE "PARAMETERS" TO PASS(WHILE GENERATING URL)_WHILE CALLING AN ORACLE FORM.._
Thanks in Advance..!!

Hi,
In addition to the above...
if i give the 5th parameter as, 'HEADER_ID=||'header_id { in runtime it'll be converted as 'HEADER_ID=5432..}
I'm not getting any error, getting a fresh Sales order page..!! { The given Header ID is ignored }
else if i give something like 'HEADER_ID=||'header_id||'&FunctionName=ONT_OEXOEORD...' { lets say }
its throwing the following errors..
FRM-47023: No such parameter named G_QUERY_FIND exists in form OEXOEORD.
FRM-40105: Unable to resolve reference to item PARAMETER.G_QUERY_FIND
FRM-47023: No such parameter named ORDER_NUMBER exists in form OEXOEORD.
and then it shows up the Navigator.
Requirement :_
How to pass parameter to a form while calling them through URL.
Thank you,

Call Bpel process from JSP

hi I am completely new to BPEL and supposed to call BPEL process frm JSP page....i went through a couple of tutorials and learnt about the Technology. But still couldnt find the way. Can any one help or send some link where i can download few sample application or Tell me the way to do this????

The payload of the XML is described in the WSDL of the webservice. In general this is described in a XML schema (xsd). When you user selects a web service, you could read the WSDL of the webserice an determine the payload of this service, or you program this in you java code for each service.

How to call a Procedure throguh a BUTTON

I want to call a procedure through a button; WHEN BUTTON PRESSED TRIGGER.
Plz tell how it would be...?

Ghulam Yassen wrote:
I want to call a procedure through a button; WHEN BUTTON PRESSED TRIGGER.
Plz tell how it would be...?Without more information, it's hard to provide exact solution...
just call a procedure in a button or anywhere simply follow this code
procedure_name;Hope this helps

Executing sudo linux commands through a JSP page.

Hi,
I need to execute some superuser commands through a JSP page under Linux.
I added users apache and tomcat to the /etc/sudoers file with no password prompting.
My JSP page works fine with any usual linux command, but when I call a sudo cmd I have a message (when reading the ErrorStream instead of the InputStream) that sudo cant be executed because it needs a tty even when I call the shell before the sudo command.
Here is a piece of my code (very basic):
String cmd="linux_cmd";
Process proc = Runtime.getRuntime().exec(cmd);
InputStream stdin = proc.getInputStream();
InputStreamReader isr = new InputStreamReader(stdin);
BufferedReader br = new BufferedReader(isr);
String line = null;
while ( (line = br.readLine()) != null)
out.println(line);
Is there any way I can make sudo calls from a JSP page ?
I know that making root calls from a web application is a bad thing, but for now security is not my concern.
Thank you for any tips.

JavaFan2 wrote:
In fact, I help supervising a student project who is supposed to write an admin application to offert graphical interfaces for some security and system tools under Linux (like fdisk, iptables etc) using J2EE, ... something like Webmin.
As I said, I know that is has a huge security risk but this app has the only purpose of learning J2EE, no security issues are treated.If you want to say "I will leave my office door open because there's no security risk in doing that" then that's a valid statement. But what you are trying to do here isn't the equivalent of leaving your office door open. It's the equivalent of finding a master key for all the offices in the world. And as such it is in fact a serious security risk which should not be circumvented.
And no, it's no good saying "But I'm only going to use this all-powerful master key to open my own office door". If you get the key then anybody else can get the key too.

We can not clear all recents(30 recents call). When Tango show "No recents call". We touch other buttons and come back to Recents button again. It still show 30 recents call.

We can not clear all recents(30 recents call). When Tango show "No recents call". We touch other buttons and come back to Recents button again. It still show 30 recents call.

No one here is going to do anything about it. Send feedback to Apple.
http://www.apple.com/feedback/ipad.html
Basic troubleshooting steps.
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 

How to call BPEL process in JSP page

Hi
I am new to BPEL.please help me how to call BPEL process in JSP page.
Thank You...

Check this thread ....
How can i call asyncronous BPEL process from Java Class????
Tom..

How can I fix my phone's ringer? The call comes through but it won't ring.

I've had my iPhone for over 6 months now with no issues. I have not had it reserviced, its not refurbished, and I bought it new from an AT&T store.
This week my phone stopped ringing. The incoming call comes through on the screen, but it doesn't ring out loud so I know I'm getting a call and I can't sit and stare at my iPhone's screen all day long to see if I'm getting an incoming call. It vibrates when a call comes in maybe 20% of the time.
Today I went into settings and reset my settings but it still didn't bring my ringer back. It plays the ringers when you are looking through the list of ringers, it plays it when you alter the volume setting, but when a call is actually coming in or when I'm receiving a text message or something, no sound.
What can I do to get my ringer back?

Check the mute switch on the side above the volume rocker. If the red dot shows, the phone is muted. You'll still be able to play the ringtones to select one.
I find that the switch can be thrown to "mute" by accident when I put my iPhone in my belt holster.

Calling a Procedure from a Button? (REVISITED)

Hi All,
I once asked a question Re: Calling a Procedure from a Button? & that problem was resolved when i was working on the online ApEx.
On my application, requirements have changed a bit: I have one form based on two tables. One table contributes two fields (name & surname) to the form while the remaining fields are contributed by another table to make a total of 17 fields on the form.
My process is in such a way that a user enters an id number & clicks Search button, if the apllicant exists then both name & surname corresponding with the id number will be retrieved from the database. If the applicant does not exist then an error message will be displayed inline with the id number field. Here's the PL/SQL anonymous block to that:
DECLARE
vNAME APPLICANTS.name%TYPE;
vSURNAME APPLICANTS.surname%TYPE;
BEGIN
SELECT count(*)
INTO :P2_COUNT
FROM applicants
WHERE id_number = :P2_ID_NUMBER;
IF :P2_COUNT > 0 THEN
SELECT name,surname
INTO vNAME, vSURNAME
FROM applicants
WHERE id_number = :P2_ID_NUMBER;
:P2_NAME := vNAME;
:P2_SURNAME := vSURNAME;
ELSE
apex_application.g_print_success_message := '<span style="color:red">Applicant does not exist.</span>';
END IF;
EXCEPTION WHEN NO_DATA_FOUND THEN
apex_application.g_print_success_message := '<span style="color:red">Exception Caught.</span>';
END;The PL/SQL block works except for error displaying part (but that's a problem for another day).
NB: On my application, there’s already Automated Row Fetch & Automatic Row Processing (DML) processes for one table. Furthermore, there is also a javascript for verifying the validity of an id number. As a result, I decided to include Automated Row Fetch & Automatic Row Processing (DML) processes for the other table. When I click a Search button the javascript is activated even though I did not specify a URL target for the button - because this is a simple button among region items – it does not have Optional Url Redirect section.
I'm not sure what I'm doing wrong here - any help is appreciated.
Regards
Kamo

Hi Dan,
Sorry for causing confusion with my post - it's just that I was asking the same question (with different constraints) as I had asked before so I didn't feel like going to details was necessary because in my post I included a link to the previous thread. Interestingly, I was working on apex.oracle.com when I posted the original thread - the only problem came to be when I started to move the solution to my application on my machine.
Anyway, thanks for the response!
Regards
Kamo

Calling BSP through a JSP button in EP

Similar Messages

Maybe you are looking for