Calling Microsoft word speech in LabVIEW through ActiveX

hi
Yesterday i had posted 1 question , how to get the output of some other programme in LabVIEW. Well. i have found out the answer. This can be done by using ActiveX. For this the programme also must be ActiveX enabled.
I wanted to use the microsoft Word Speech in labVIEW through ActiveX.Since microsoft word is also ActiveX enabled, this can be called.
But the question is HOW????????
Help me out of this
Somil Gautam
Think Weird

If you want to give voice commands to LabVIEW, you might want to read this blog
Now is the right time to use %^<%Y-%m-%dT%H:%M:%S%3uZ>T
If you don't hate time zones, you're not a real programmer.
"You are what you don't automate"
Inplaceness is synonymous with insidiousness

Similar Messages

  • OLE2: Calling Microsoft Word from Forms

    I am writing an Forms application which requires me to be able to open a Word template file; then replace the bookmarks in the template with data from an oracle database; then to save and print the Word document.
    I know I can do this using the OLE2 package, but I don't know how to. Does anyone know where I can find a good source of information showing actually how to do it, the standard Oracle documentation is syntax only, I could do with some example code, etc.
    Thanks
    Nik

    Hi there,
    You can take a look at the samples-forms. When you install Forms you can install demos too. One of those demo-forms shows how to use Forms and Word through OLE2. For ths source you can take a look within the FMB file.

  • Webutil failed to call microsoft word

    I have installed webutil and it works fine.I can run the
    webutil_demo except failed to write something to word.
    please help.
    console shows:
    at java.awt.Component.dispatchEventImpl(Unknown Source)
         at java.awt.Container.dispatchEventImpl(Unknown Source)
         at java.awt.Component.dispatchEvent(Unknown Source)
         at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
         at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
         at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
         at java.awt.Container.dispatchEventImpl(Unknown Source)
         at java.awt.Component.dispatchEvent(Unknown Source)
         at java.awt.EventQueue.dispatchEvent(Unknown Source)
         at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
         at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
         at java.awt.EventDispatchThread.run(Unknown Source)

    Thanks Andres!
    I have confirmed that the following instructions does allow you to use Word 2010 32-bit running on Windows 7 64-bit or Windows Server 2008 R2 to edit company
    knowledge...
    1. Go to the directory where the OpsMgr console is installed (example: C:\Program Files\System Center\Operations Manager 2012\Console )
    2. Make a copy of Microsoft.EnterpriseManagement.Monitoring.Console.exe.config
    3. Edit Microsoft.EnterpriseManagement.Monitoring.Console.exe.config using Administrator rights
    4. Search for “</dependentAssembly>” and remove the “<publisherPolicy apply="no" />” line immediately following the “</dependentAssembly>” line
    Hope this helps!
    Regards,
    JJ
    Well, firstly I have to agree with other people's comments along the lines of "It shouldn't be this hard!", but I can happily say that the solution above (by IM5FOOTNOTHIN)
    worked for me...once I noticed this crucial footnote: "Do this for
    ALL instances of the
    <publisherPolicy apply="no" /> line that immediately follow the </dependentAssembly> line"

  • Calling Microsoft Word in Java

    I am new to Java. I would like to know is there any way that I can invoke Word or Excel application in my Java program? If yes, how? Thank you in advance for your help.

    Use Runtime.getRuntime().exec("..."), where the string could be word.exe etc.

  • How do I Launch a Microsoft WORD Document using AciveX from testStand

    Hello All:
    I would like to launch a Word document from within Teststand. I would also like to have the ability to search the document for particular sections of the document. I can not find any sequence file examples that even comes close to demonstrating any of this.
    Thanks...

    Hello Craig,
    I have attached an example that will demonstrate this for you. You may need to change the Word Server to match the version of Word that you have installed. This can be done by right clicking on each ActiveX step and select Specify Module. Under Automation Server, scroll down the list to Microsoft Word... and select it.
    This is primarily an example to demostrate calling Microsoft Word from TestStand. If you require additional functionality from the Microsoft Word ActiveX server then you should refer to the API reference help for Microsoft Word.
    Hope this helps!
    Bob
    Attachments:
    TSWord.zip ‏7 KB

  • HELP : Microsoft word on mac

    Dear all,
    i need to work on microsoft word, and i use imac working on mac os 10.6
    is there any microsoft word application for it ??

    is there any microsoft word application for it ??
    Yes.. It's called Microsoft Word.
    If you have further questions regarding Word, please post them on Microsoft's Mac forums:
    http://www.officeformac.com/productforums

  • Error -2147319779 Library not registered when trying to use ActiveX to open microsoft word

    Hi
    I am having problems when I try to run an executable on a PC.  My Development PC that has Labview 8.2 and Microsoft Word 2000.  I am able to run my vi (see pic attachement) without any problems.  I compile it as an executable and run it on my Development PC and everything still works ok.  I deployed it on another machine with Labview Run-Time Engine Version 8.2 and it works ok.  I tried it again on a third PC and get the following error
    Error -2147319779 Library not registered
    All PC's are running windows XP and all have microsoft word 2000 installed.
    I have tried uninstalling National instruments software (Run-time Engine) as well as Microsoft Word on the failing PC, but still no luck.
    Does anyone have any suggestions.
    Thanks
    Steve
    Attachments:
    open word and save changes.jpg ‏59 KB

    Hey Steve,
    I hate to throw links at you, but it appears this problem has occurred with developers before.
    Easy text Report.VI...not so easy (You have to love a title like that)
    Problem with LabVIEW Run Time communicating with Access Database
    These links may not seem relevant to your issue, but at its base the Report Generation and Database Connectivity toolsets are simply ActiveX/.NET calls into Microsoft products (or ODBC, etc.). This is similar to what you're doing.
    Also, I would try reinstalling MS Office. This has been known to solve the problem.
    Cheers.
    | Michael K | Project Manager | LabVIEW R&D | National Instruments |

  • Invoke ActiveX Node with Microsoft Word conflict

    I have a stable LabVIEW 7.0 application that uses “Microsoft
    Word 9.0 Object Library Version 8.1” to edit word files. After changing my
    development system computer, the “Documents.Open” method no longer works. The
    error is “The server threw an exception -2147417851”. It appears to have added
    the following inputs: NoEncodingDialog, DocumentDirection, OpenAndRepair, XML
    Transform. See the attached old and new code images.
    I’m running the same version of Word 2000 (9.0.2720) and
    LabVIEW. The only change is that I have installed Outlook 2007 and I suspect
    that this is the problem.
    Does anyone know how to find the corresponding DLL for a
    ActiveX control used in LabVIEW as I might be able to copy it from the old PC
    or has anyone had this problem before and managed to open a Word document.
    Cheers, Victor

    The MicroSoft Word ActiveX architecture is a always moving target.
    The quantity of arguments passed changes often and because of the distributed nature of Windows, one program can deliver a low level change unrelated to the application you are working on.
    The good news is, after you compile your code to an exectuable, additional optional arguments that you do not have in your code does not through an error.
    The bad news is, when you are developing, you do need to force the ActiveX properties and invokes to update or it will appear broken.
    I have 100s of vis that automate Word and Excel.  Updating the development environment is always a 1 day adventure ... discovering what is new from MicroSoft.
    Also keep in mind that MicroSoft is backwards compatible.  If you are distributing, don't develop on the latest greatest and assume it will work on older versions of MicroSoft.   You need to develop on the oldest version of MicroSoft you intend to support and the newer versions will work too.

  • What are needed to have labview print report to microsoft word

    i'm building a stand alone application that puts the collected data into Microsoft Word, and it then sends the word report to the printer when click Print from my LabVIEW.  But when click Print it runs and generates error message that says "Error 7 occured at Open VI Reference in Dispose Report.vi ->Word Report.vi ->Main.vi".  I think i'm missing something during building application stage but i'm not sure what it is.  How can i approach this error?

    In the cd with the report generation toolkit you can find the procedure for building an executable.
    You have to add the following vi's dinamically:
    - vi.lib\addons\_office\_exclsub.llb\_excel dynamic vis.vi
    - vi.lib\addons\_office\_wordsub.llb\_word dynamic vis.vi
    Software developer
    www.mcm-electronics.com
    PS: Don't forget to rate a good anwser ; )
    Currently using Labview 2011
    PORTUGAL

  • Saving only a portion of a Microsoft Word template into a new document using LabVIEW Report Generation Toolkit

    I have a Microsoft Word template I want to populate programmatically with test data. The template contains both explanatory text and a data sheet section with test data placeholders (bookmarks). Using the Report Generation Toolkit for Microsoft Office, I have been able to successfully populate the placeholders with data and save the results into a new Microsoft Word document. The problem is the new Word document contains not only the test data but also the explanatory text that was in the original document template. Ideally, I would like to have the generated document contain just the test data without the accompanying text. Is it possible to do this usi
    ng the Report Generation Toolkit?

    Hello Ryan,
    Two easy options come to mind.
    1. You may want to consider using an �ink annotation� instead of regular text for your explanation.
    2. You can programmatically do a find and replace on the explanatory text. Have LabVIEW find the whole paragraph, and replace it with nothing.
    If none of these suggestions help, or if I�m not correctly understanding your issue, please reply with comments or answers to the discussion above and any additional information that may help, and I�ll be happy to look further into it.
    Have a nice day!
    Robert Mortensen
    Applications Engineer
    National Instruments
    Robert Mortensen
    Software Engineer
    National Instruments

  • Can't open Microsoft Word document through SharePoint

    Since upgrading to Firefox 35, I am no longer able to open Microsoft Word files through SharePoint. When I select "Edit in Microsoft Word," I get the error message "No connectivity with the server. [FILENAME] can't be opened because the server couldn't be contacted."
    Note that this is specific to my Mac. I can open Word files on SharePoint when I use my VMWare Windows simulator.
    Any suggestions for a fix?

    see if any of these can help.
    http://kb.mozillazine.org/Unable_to_save_or_download_files
    http://www.ehow.com/how_11385212_troubleshoot-reset-connection-firefox.html
    https://support.mozilla.org/en-US/kb/server-not-found-connection-problem
    https://support.mozilla.org/en-US/kb/firefox-cant-load-websites-other-browsers-can
    https://support.mozilla.org/en-US/kb/secure-connection-failed-error-message
    https://support.mozilla.org/en-US/kb/connection-untrusted-error-message
    '''http://kb.mozillazine.org/Error_loading_websites'''
    '''This Connection is Untrusted''' is sometimes caused because the
    computer system clock is wrong. Check the time / date / time zone settings.

  • Exporting figures to word from labview using activex??

    Does anybody know how to export figures into MS Word, XP edition from LabVIEW using activex. I am not using the report generation toolkit...dont have it....help wld be appreciated
    kuttu

    Here are some examples you can use. they all use activeX. One is even a toolkit I got from somewhere.Try these and if you have any more questions let me know.
    Joe.
    "NOTHING IS EVER EASY"
    Attachments:
    word.zip ‏1226 KB

  • Microsoft Word Templates and ActiveX Control Problems

    Hi,
    I am experiencing a strange problem in Microsoft Word. I am writing a VBA application which displays a cwgraph in a form. If I add the graph to a form in the Normal.dot template the control is fine. If I add the graph to a form in a new template (where all my code is) the graph displays evaluation copy. The graph in the Normal.dot template is fine and displays without the licensing information and in the properties it displays the correct licence code etc.
    Has anyone experienced this before and got any suggestions.
    Thanks in advance.
    Regards.
    Joe

    Jon.
    Thanks for the reply. I have already run the license fixer utility and it does not locate any broken licenses. I have also uninstalled everything and deleted cwui.ocx in System32, then reinstalled and tried again. The strange thing is that it works in Visual Basic standalone, in the normal.dot template in Word. It just doesn't work in a different template file.
    Thanks.
    Joe

  • Call Bex Workbook from browser through ActiveX or OLE

    Hello. I have to run bex workbook from browser. I found out that I can do it through ActiveX and "SAPBEX.XLA!SAPBEXgetConnection", but I didn't succeed. Can anybody help me out?

    Vanessa,
    Please do not raise the same post across forums ..
    /thread/1257238 [original link is broken]
    the above thread is being considered as duplicate and being deleted - because this particular post has been raised in the correct forum..

  • Brand new...clueless...looking for mac version of microsoft word....what is it called and how do we get it...thanks!

    how do we find this on mac book = microsoft word type program?

    Microsoft Office for Mac Home and Student 2011 Family Pack
    Microsoft Office for Mac Home and Business 2011 - 1 license
    Microsoft Office for Mac Home and Business 2011 - 2 installs
    Or you could use pages ( MAc Program).
    iWork
    iWork Family Pack

Maybe you are looking for

  • Print message print cartridge cannot move because of paper jam but the paper jam has been cleared.

    My Envy 4502 printer message window says that the print cartridge cannot move and to clear any paper jam obstruction.  There was a paper jam and I cleared it but the message "the print cartridge cannot move and to clear any paper jam obstruction" rem

  • Is this taking advantage of the consumer?

    I have spent hundreds of dollars on iTunes songs. I have asked Apple to 'reactivate songs' twice out of the three times now, and each time I've lost my music is purely because of Apple's software. Why can't we redownload previously purchased songs fo

  • How to hide the cursor in text entry boxes

    I didn't see this answer in the forum, and it took a while to figure this out so I thought I'd post my solution. The issue is that a question requires that the user know where to click before typing, then type the correct value. The problem is that a

  • Hidden Web and walk icon on 8800 RIM smartphone.

    Hello, I am new on this forum but hope to get some help from you the good users of this forum. I have 8800 RIM but I am unable to activate internet connection. I get message like data connection refused and Activation Entrprise Password needed! And m

  • Itunes match renewed and lost all my music

    My itunes subscription automatically renewed on 10/6/13 and I have a reciept for the transaction.  Now all my music is missing.  This is really ******* me off.  I have so much music it will take forever to get it all back on my computer and then into