Calling SAP Screen in RFID

Hello All,
I am technical consultant. I searched SDN for actual process which can help me with end to end soution in bits and pieces. Ultimately i am posting a query here.
We are having requirement for automation of outbound shipping process. We need to develop some custom screens in SAP, integrate them with scanners which client is using. Whenever a user scans the material/anything, it should be captured in SAP screen on scanner.User will perform enter button,and further processing will be done in SAP automatically.
So looking at requirement, i searched in SDN and found that we can use SAP console, can create custom screens in SAP, configure them in mobile data entry in SPRO in sap.
But i want to know how actually this process works. There could be many screens configured at a time in SAP. How would any scanner get the required one screen from SAP for scanning material/anything?
I would really appreciate your immediate help.
Thanks
Manisha

Hi manisha,
your requirement is very high level, but from what I infer from it is that you want to be able to create a delivery , pick, pack & ship it upon a clik, did I get it right? here's how I'd address it : there's no standard transaction to achieve this.
1. you can automatically create handling units for your finished goods received from manufacturing orders, the HU number will contain all the material related information & will be labelled with HU number.
2. develop a transaction where you can scan in the HU number & automatically perform a pick, pack & ship depending on your requirement, (ofcourse, you can break this into mutiple transactions as you wish or combine)
you can develop RF transactions for the 2nd step (also possible for 1st step if needed) , deploy them onto the mobile devices using ITS mobile or websap console - ITS is probably better. every screen you develop has a screen number, the program will have to call the screen accordingly in your transaction.
cheers
rajki

Similar Messages

RFC iView calling SAP screen

Hello all,
We have a RFC that calls a SAP screen. Is there a way showing this screen from a RFC iView? Parameter I can set on the iView, connector, SAP system?
Other RFC'S work great, but this one contains a SAP popup.
Thanks!
Martin

if there is a screen processing it will not work with RFC iview. (general rule of RFC is not to have screens in them)
Regards
Raja

Can we call sap screens from our own abap program?

Hi... Friends...,
I want to develop one program...
In that program my selection screen contains transcation code and screen number as input parameters.
so now if i give inputs as...
> VA41
> 4001
for given T'code and screen number...
I hav to get that screen directly!
other wise it has to give error message like...
> NO SCREEN EXISTS FOR VA41 WITH GIVEN SCREEN NUMBER
Is it possible???
If possible... guide me the logic...!
Thanks,
Naveen.I
Edited by: Naveen Inuganti on Jul 14, 2008 11:15 AM

No no.. thats ok...
we can call screen and we can update...
But in VA01 or in VA41 .. we are having more than 10 screens... can i call them with my selection screen inputs...?
let me tel you one situation.
I am having billing plan in VA41 screen's 4002nd screen so now i know the screen number and t'code here.
So if i want to know the field documnetation or technical details of billing plan field... i hav to go through va41 transaction...
can i do that from my program with one step?
And...,
one more thing here we know that there will be some mandatory inputs for screens to get the screen which we are calling!
So this reuirement may not possible for that kind of screen!
Even.... I want your suggetions!
Thanks,
Naveen.I

Call SAP Transaction from BSP

Hi,
I am new to BSP. I have to call SAP Screen on button click event on BSP and also need to pass data at runtime.
I searched this forum but didn't find the right solution. I tried to call SAP screen from BAPI and through URL but no success.
Anyone knows how it can be done?
Regards,
Usman Malik

Thanks for your reply,
Actually I am very new to BSP. I don't understand where to put this code?
[System]
Name=DEV
Description=DEV [Development]
Client=123
[User]
Name=RAJA
Language=EN
[Function]
Title=
Command=*SU01 USR02-BNAME=raja;
Type=Transaction
[Configuration]
WorkDir=d:xxxxxxSapWorkDir
[Options]
Reuse=1
Second thing is about shortcut. Do I have to place this shortcut on server?
Thanks,
Usman Malik

SAP Screen Modification on RFID

Dear All,
When SAP Screen is displayed on RFID.Its too big to hold so i need to scroll whole screen and very difficult to maintain screen.Can anybody provide me solution for this to make it small or any other solution.
Regards,
MTB

Hi Mayank,
Thanks for the info. However this is also very less info to start answering with
You are telling SAP. What part of SAP are you sending data to?
Is it SAP AII or SAP WM or SAP (?module). Or is it SAP Mobile Applicaiton?
And tags (UHF), what is your physical infrastructure? What SAP Screen is exposed on RFID Reader?

Call multiple screens from LSMw

Hi
i want to call multiple screens from lsmw
I need to call a three transaction from LSMW wich are subzequent steps for data entry.
1) first tcode to be called is eprodcust which creates some master data and using this master data and some fields of data creatd i need to call two more tcodes first iq01 to create meter and save then eg31 tcod to feed data.
Please suggest where in lsmw can i give options for suc hscnerio and call of subsequent screens.
regards
Edited by: Prieti_V on Nov 8, 2011 8:28 PM

Hi Priti ,
we have few options to handle such cases , to avoid Locked Problems what you can do is
-->write BDC program within LSMW to create installation ( this will be created within step of 11 Convert Data ).
-->Based on the above BDC results ,run another BDC within LSMW to create Device.( this will be created within step of 11 Convert Data ).
-->third BDC records , let SAP do it thru LSMW or can you do it convert data step itself.
this approch needs lots of codes , so in worst case and if you dont want to break the loadings the follow this.
*Better to find any BAPI which will do creation of installation ,devices
regards
Prabhu

Calling Selection Screen in Modal dialog box

Hi Experts.
I have created screen 9000 having user interface and in tool bar there is create button in the screen 9000
The create button 9001 will call another screen with different I/O fields (9001 is Modal dialog screen).
In the 9001 there is push button for which the selection screen is called 9002.
I have declared 9002 as subscreen and called the screen 9002 in user command.
In the Screen 9001 when user clicks the push button i need to get pop up screen where the user select some data.
How i need to do ?
I am getting error can't call subscreen in modal dialog box.
Thanks,
ERPSAP

HI,
HOpe this will help you
How to call table control in subscreen in module pool program
http://sap.ittoolbox.com/groups/technical-functional/sap-dev/reg-tab-strip-control-module-pool-abap-444944
http://12go.com/sap/search?query=title%3A(calling%20subscreens%20in%20module%20pool)
Regards,
Pravin

Short dump while using call selection-screen mdynnr

Hi ALL,
I need your help and information.
In programmes, We are using the statament " CALL SELECTION-SCREEN MDYNNR "
and passing the screens dynamically into variable mdynnr.
And the programme is going to dump after executing 50 times.
When we
can we use any other statement instead of CALL SELECTION-SCREEN MDYNNR.
Your information helps us lot.
Thanks in advance.
Srinivasa Reddy.

Hi,
As you know Call Screen is the statement, but you will get the problem if you are going to call it in the same LUW repeatedly. So, FM is the only convenient way to do it. This is very easy. Just create a FM and replace you statement with this FM. Hopefully this will solve your problem.
Check this comment " When you call a new main program in order to use a screen sequence (for example, using CALL TRANSACTION), a new SAP LUW begins. This may be an undesired effect, especially when you are trying to modularize a transaction that updates the database.
An alternative to this is to use an external procedure, whose main program is linked to a screen sequence, and which contains the corresponding dialog modules. Procedures run in the same SAP LUW and internal session as their calling program."
Thanks,

Input data to the standard SAP screen .

How to input data to the standard SAP screen . ?
i am using BADI HRHAP00_ENHANCE_FREE to add some functionality to the screen of transaction PHAP_CREATE.
=================================
i am calling this FM 'F4IF_INT_TABLE_VALUE_REQUEST'
in the BADI and i have to update the fields in the screen of the main program which is calling this BADI (HRHAP00_ENHANCE_FREE).
This BADI is called at the button click .
ZOBJECT_TABLE is a Z- table with values out which we have to select the value.
and the value should be filled in the screen field as we select the record from the help.
====================================
the screen is SAPLHRHAP_UI_DOCUMENT -
SCREEN 3100
The elements doesnt even have parameter ids .
please suggest me how can it be done
thanks in advance .
Naval Bhatt

Hi,
I have solved the problem and my work is done properly.

Creating a screen in report program and calling that screen in program.

Hi,
I have a report program and I want to give output in different screen.
can any one tell me how to create a screen in executable program and calling that screen in program in END-OF-SELECTION for displaying results.
Thanks a lot.
Kiran

Hi,
Open your program in SE80. Right click on your program. Click CREATE->Screen menu. This will allow you to create screen for the program.
In the End-of-selection event call the screen using the commands CALL SCREEN or LEAVE TO SCREEN or SET SCREEN.
CALL SCREEN
http://help.sap.com/saphelp_47x200/helpdata/en/9f/dba4e635c111d1829f0000e829fbfe/content.htm
LEAVE SCREEN/SET SCREEN
http://help.sap.com/saphelp_47x200/helpdata/en/9f/dbab3635c111d1829f0000e829fbfe/content.htm
Regards,
Vara

How to call a Screens modules inside class methods in ALV of OOABAP.

I have a urgent reruirement to call a screen's PBO and PAI module inside a class method. I really dont want to create a function module and call the the screen inside that. Please revert if anyone have a solution as it is really urgent!!
Moderator message - "Urgency" is not catered to in the forums.
Message was edited by: Suhas Saha

Hi Shehzad,
SAPHELP on Advantages of ABAP Objects - Using ABAP - SAP Library says -
There are only two purposes for which procedural ABAP is essential:
· Encapsulation of classic screens in function modules.
· When you want to make functions available to other systems, but are not able to make class methods available externally using XI server proxies. In this case, you have to use function modules.
Regards,
DPM
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/56/14934259a5c66ae10000000a155106/content.htm

To call SAP TCode

Hi,
    Is there any way to call SAP standard transaction (tcode) in webdynpro?
    Actually here goes my requirement. If I click a button, it should go to a specific transaction.
Regards,
Kalai.

Hi,
    Thanks for ur reply.
    Actually I dint want to display the standard transaction in my screen. But I would like to design my own screen which looks similarly as standard transaction but without some fields and functionalities.
   Also, if I give some input, it should do the same functionality as standard transaction. Such as retrieving values, updating values, listing all possible values(using F4) and updating values in the table in R3 System.
   Is it possible to do this?? If so, Kindly suggest me some ways to do this.
Regards,
Kalai.
Message was edited by:
        Kalaivani Pachiappan

Dialog Programming(module pool):call a screen to subscreen area.

Hi experts,
I want to call a screen created in the function group into my
subscreen area of current screen of main program.
I have done the below way :
1. Created a screen 100 in the module pool program z_bpmodule.
2.created a subscreen area SUB in screen 100.
3. I hav created function group :zfungroup
and a screen 300,a function module Z_EXPORT_FUN for exporting the data to the screen 300 from report.
Now my prog is lik below :
PROGRAM Z_SUBSCREEN1.
DATA : ZMATNR LIKE MARA-MATNR.
DATA : DYNNR LIKE SY-DYNNR .
*&      Module STATUS_0100 OUTPUT
      text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'TITLE'.
ENDMODULE.                 " STATUS_0100 OUTPUT
*&      Module EXPORT_DATA OUTPUT
      text
MODULE EXPORT_DATA OUTPUT.
CALL FUNCTION 'Z_EXPORT_FUN'
                          EXPORTING Z_INPUT = ZMATNR.
ENDMODULE.                 " EXPORT_DATA OUTPUT
*&      Module USER_COMMAND_0100 INPUT
      text
MODULE USER_COMMAND_0100 INPUT.
CASE SY-UCOMM.
WHEN 'EXP'.
DYNNR = '0300'.
*ENDCASE.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
and the flow logic is lik this :
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
MODULE EXPORT_DATA.
CALL SUBSCREEN SUB INCLUDING SY-REPID ' 0300'.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_0100.
CALL SUBSCREEN SUB.
Now the main problem is i am not able to call the screen from function group to subscreen area...
kindly provide the solution.....
Thanks a lot in adv ....
Brahma.

I am just getting the main screen and the subscreen is not at all displaying .....
but when i perform the PAI .. I am getting the dump ..
Short text
    Dynpro does not exist
What happened?
    Error in the ABAP Application Program
    The current ABAP program "Z_SUBSCREEN1" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
What can you do?
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
Error analysis
    The system attempted to use dynpro 0000 in program "Z_TX1".
    This dynpro does not exist.
How to correct the error
    Probably the only way to eliminate the error is to correct the program.
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "DYNPRO_NOT_FOUND" " "
    "Z_SUBSCREEN1" or "Z_SUBSCREEN1"
    "EXPORT_DATA"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
   In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
hope i have given the full information.
Thanks a lot.

Call a Screen from A selection screen report

Hi Friends,
I developed a report (1. Excecutable) and i am calling a screen say 9000 which is having several subscreens. While i am clicking the BACK button it should come to the same selection screen report. How to do this? We can't use LEAVE SCREEN or LEAVE TO SCREEN 0. Because 9000 screen having the subscreen. If i use LEAVE PROGRAM it won't come to selection screen. Instead it will come out of program.
Please help me.
Thanks and regards
Srikanth. S

hi srikanth,
We can come from screen to selection screen of the report by using -- "LEAVE TO LIST PROCESSING".
If u need some more info plz check below.
https://www.sdn.sap.com/irj/sdn/forums
https://www.sdn.sap.com/irj/sdn/forums
https://www.sdn.sap.com/irj/sdn/forums
Reward if it is usful,
Thanks,
Srikanth.A

The URL to call the screen of RFx directly

Dear expart.
I'm setteing at SRM7.0 in order to call RFx directly from SUS now.
I would like to know what URL should be sat at URL of BIDDING_SERVICE in CustomerSetting of SUS.
Should I set URL of EP there?
Should I set URL of ITS as well as SRM5.0?
Because ITS have not been used since SRM7.0, I have no Idea how to set.
SO could you please let me know if you know the URL calling the screen of RFX directly.
Thanks

Hello ,
Please use the url to launch the RFQ BO directly.
HTTP://<Server and Port>/sap/bc/webdynpro/sapsrm/wda_l_fpm_oif?
sap-wd-configId=/SAPSRM/WDAC_I_FPM_OIF_RFQ_PR_PU
&sap-system-login-basic_auth=X
&sap-client=<client_no>
&sap-language=EN
&SAPSRM_BOID=<Object Guid>
&SAPSRM_BOTYPE=BUS2200
&SAPSRM_MODE=DISPLAY
Let me know if you have any further issues.
Best Regards.
Mani

Calling SAP Screen in RFID

Similar Messages

Maybe you are looking for