Calling sets in an ABAP program

i am working on a validation exit for FI. Is it possible to create sets to group data and call the sets in a ABAP program in a validation exit.
Any clarification will be appreciated.
thank you
Krishna

Hi,
you can group data:
1) in special standard trx. like KDH2
and read them with table setheader and setleaf
or (better)
2) creat your own customer Table to group data with key-fields:
mandt groupname fieldname fieldvalue
100     Z001          SAKNR   4711
100     Z001          SAKNR   4712
and in your val.-exit you can check values against this table
A.
Message was edited by:
        Andreas Mann

Similar Messages

  • How to call subroutines defined in ABAP program with type S

    how to call subroutines defined in ABAP program with type S? can you give an example?

    Normal executable program,
    REPORT  ZTEST_MAIN.
    perform sub1 in program ztest_sub.
    "you can call using in program addition
    Subroutine pool program
    PROGRAM  ZTEST_SUB.
    form sub1.
    endform.

  • How to call a idoc in abap program and updates catsdb table

    how to call a idoc in abap program and updates catsdb table
    thank you,
    Jagrut BharatKumar Shukla

    Hi Kishan,
    You can refer to following help document,
    http://help.sap.com/saphelp_nw04/helpdata/en/bf/d005244e9d1d4d92b2fe7935556b4c/content.htm
    Regards,
    Meera

  • Call SXPG _ CALL _ SYSTEM from ABAP program

    Hi,
    Someone may help me?  I need to call the function module SXPG _ CALL _ SYSTEM from ABAP program for to encrypt a file.
    I created the command by SM49 , but I don't know how I can call it from ABAP program.
    Thanks
    Maria C

    Hi Maria.
    This is a possible code you can use:
    DATA: log LIKE TABLE OF btcxpm WITH HEADER LINE.
    Can contain STDOUT, STDERR
    commandname =
    CALL FUNCTION ‘SXPG_CALL_SYSTEM’
    IMPORTING
      COMMANDNAME = commandname
      PARAMETERS = parameters
    EXPORTING
    STATUS = status
      TABLES
      EXEC_PROTOCOL = log
    EXCEPTIONS
      NO_PERMISSION = 1
      COMMAND_NOT_FOUND = 2
      PARAMETERS_TOO_LONG = 3
      SECURITY_RISK = 4
      WRONG_CHECK_CALL_INTERFACE = 5
      PROGRAM_START_ERROR = 6
      PROGRAM_TERMINATION_ERROR = 7
      X_ERROR = 8
      PARAMETER_EXPECTED = 9
      TOO_MANY_PARAMETERS = 10
      ILLEGAL_COMMAND = 11
      OTHERS = 12.
    The following are the comments of the parameters taken from:
    http://help.sap.com/saphelp_40b/helpdata/en/fa/0971ee543b11d1898e0000e8322d00/content.htm
    Parameters
    IMPORTING Parameters
    Parameter name
    Use
    COMMANDNAME
    The name of the definition of the external command, as specified in the maintenance function (transaction SM69).
    PARAMETERS
    Arguments for the external command as specified by the definition in the R/3 System and by the calling program or user.
    These arguments are checked for impermissible characters, such as the ; under UNIX. Problems are registered with the SECURITY_RISK exception.
    EXPORTING Parameters
    Parameter name
    Use
    STATUS
    Returns the final status of the execution of the external command:
    · Value ‘O’: The external command was started and ran to end successfully.
    · Value ‘E’: An error occurred; the external command was not run successfully.
    Tables Parameters
    Parameter name
    Use
    EXEC_PROTOCOL
    Contains the STDOUT and STDERR output of the external command and any output from the target host system.
    Exceptions
    Exception name
    Meaning
    X_ERROR
    Reserved for future use.
    NO_PERMISSION
    The AUTHORITY-CHECK of the user’s authorization for the authorization object S_LOG_COM failed. The user is not authorized to carry out the command named with the specified arguments on the target system.
    COMMAND_NOT_FOUND
    Command name, as identified by COMMANDNAME and OPERATINGSYSTEM, has not been defined in the maintenance function (transaction SM69).
    PARAMETERS_TOO_LONG
    The combined argument string (ADDITIONAL_PARAMETERS and the DEFINED_PARAMETERS, as returned in ALL_PARAMETERS) exceeds the limit of 128 characters in length.
    SECURITY_RISK
    Either:
    · The command contains impermissible characters. These are characters with potentially dangerous properties, such as ; under UNIX.
    · The command definition specifies that an extra-check function module be run. This function module has rejected execution of the command.
    WRONG_CHECK_CALL_
    INTERFACE
    The command definition specifies that an extra-check function module is to be run. Either this function module is missing, or the interface defined for this function module does not match that of the standard R/3 function module SXPG_DUMMY_COMMAND_CHECK. For more information, please see SXPG_DUMMY_COMMAND_CHECK: Interface for Extra-Check Function Modules.
    TOO_MANY_PARAMETERS
    The command definition specifies that user-specified arguments for the external command are not allowed. However, an additional string of command arguments was specified.
    PARAMETER_EXPECTED
    The command definition includes the placeholder character ?, which signifies that additional user-defined arguments are required. However, no additional arguments string was supplied.
    PROGRAM_START_ERROR
    An error occurred while starting the external command. The R/3 system field SY-MSGV1 contains additional information on the problem.
    PROGRAM_TERMINATION_
    ERROR
    An error occurred while trying to obtain the return code of the external program. The R/3 system field SY-MSGV1 contains additional information on the problem.
    ILLEGAL_COMMAND
    The external command definition was modified "illegally". That is, the command was not modified by means of the maintenance function (transaction SM69).
    The modified command is registered in the system log in its substituted form. The message is registered under the system log ID "LC".
    OTHERS
    Catch any new exceptions added to this function module.
    Hope this will be useful.
    Sandro Lombardo

  • RRI calling Web Browser instead ABAP program

    Hi All,
    I have created a RRI to call an ABAP program. However, when I try to call the ABAP program (via GOTO) it opens a web browser.
    If I execute the same query via RSRT, and call the ABAP program it works fine.
    I have also create another RRI to call another query from within BEx and it works fine.
    It only fails when calling ABAP program from BEx.
    I have read on to apply SAP NOTE 972514 - Set the ms/redirect_version parameter to value 1 and restart your ABAP Web Application.
    My ms/redirect is already = 1
    Any ideas?
    Thanks,
    Flavio

    I do have authorization. There is no error. It just open a internet explore (URL) instead of executing the ABAP program.
    Again, if I run the query via RSRT, it works just fine.
    Any ideas?
    cheers,
    Flavio

  • How to call transaction in an abap program

    how do we open a transaction thru an abap program and pass a parameter to it

    Use call transaction. You can fill up the parameters in the BDC internal table
    DATA:   bdc_tab LIKE bdcdata    OCCURS 0 WITH HEADER LINE.
    DATA:   messtab LIKE bdcmsgcoll OCCURS 0 WITH HEADER LINE.
    CONSTANTS: c_tcode LIKE t130m-tcode VALUE 'FB01'. "Tcode you want to call
            CALL TRANSACTION c_tcode
                 USING  bdc_tab
                 MODE   'N'
                 UPDATE 'S'
                 MESSAGES INTO messtab.
    Error message will be captured in the messtab.
    You can goto the SAP help on Call transaction to see all the details and options.
    <b><REMOVED BY MODERATOR></b>
    Thanks.
    Message was edited by:
            Alvaro Tejada Galindo

  • How to set a  Executable ABAP  Program to run as a Background Batch Job

    Hi
    Currently  I had a Executable ABAP  Program which when executed prompts for user to enter selection once entered and executed it will delete user entered selections from a Table.
    Now my requirment is to enhance that program to run it as a BACKGROUND BATCH JOB so that there will be an entry in SM37 when the program is executed
    How can i achieve this

    Hi,
    Please refer this link .
    It has the steps.
    http://sapient.wordpress.com/2007/06/19/how-do-you-set-up-background-jobs-in-sap/
    Regards,
    SuryaD.

  • Procedure to Call Workflow Object from ABAP program in Se38

    Hi All,
    I have one scenario like i have to call one Workflow object from ABAP program in SE38.The scenario is like below.....
    I have to select some records from database table.For example there are 100 records in the internal table.
    For all that records i have to invoke Workflow for getting approval from the authorized persons. Once Approval has come to program, It will post one document in SAP and process ends.
    Please suggest me how to move forward with this scenario.
    Regards
    Manas Ranjan Panda

    Hi,
    So you want to start a workflow from an ABAP, if an event exists for that particular workflow then the best way is to use fm SAP_WAPI_CREATE_EVENT,
    to start a workflow from an ABAP you can use fm SAP_WAPI_START_WORKFLOW.
    Kind regards, Rob Dielemans

  • Calling ITS Service via abap program

    We have made an ITS Service (SAP GUI for HTML) for one of the R/3 programs (Customized).
    If the URL is linked directly to the service, it shows correctly.
    But if we call the service via transaction code as in: Call tcode Zabc..., it does not work.
    How can we call the service directly from the abap program on the click of a button?
    Thanks in advance.

    Hi,
    You can do something like this:
    CALL FUNCTION 'CALL_BROWSER'
             EXPORTING
               url                          = path
               new_window                   = 'X'
             EXCEPTIONS
               frontend_not_supported       = 1
               frontend_error               = 2
               prog_not_found               = 3
               no_batch                     = 4
               unspecified_error            = 5
               OTHERS                       = 6
    where PATH variable is ITS service url:
        CONCATENATE 'http://server:port/sap/bc/gui/sap/its/webgui?transaction=xxxxxx&okcode=xxxx INTO path.
    Hope this helps,
    Iván.

  • Call VB Script From ABAP Program

    Hi,
    I need to call a VBS program from an abap program.  This abap will run on both 4.6 and 4.0.
    I would be very grateful for any suggestions on how this can be done.
    Thanks and Kindest Regards
    Danielle

    data: commandline(1000).
    commandline = v_vbs_filename. "complete path of vbs file
      call function 'WS_EXECUTE'
           exporting
                commandline    = commandline
                program        = 'WSCRIPT.EXE'
           exceptions
                frontend_error = 1
                no_batch       = 2
                prog_not_found = 3
                illegal_option = 4
                others         = 5.
      if sy-subrc <> 0.
        raise execution_failed.
      endif.
    Raja

  • Calling oracle procedure from ABAP program

    There is a requirement to call the oracle stored procedure with some input parameter from ABAP program.
    Suppose we have order number which is entered by the user in ABAP program.
    This order number needs to be passed to oracle stored procedure as an input parameter in the same ABAP program.
    We can call the oracle stored procedure without parameter using the following syntax
    exec sql
    execute procedure <procedure name>
    end exec.
    But do not know how to execute the oracle stored procedure with some input parameter?

    Apologies , following is the correct code.
    This will definetly solve your problem.
    DATA scarr_carrid TYPE scarr-carrid.
    SELECT-OPTIONS s_carrid FOR scarr_carrid NO INTERVALS.
    DATA s_carrid_wa LIKE LINE OF s_carrid.
    DATA name TYPE c LENGTH 20.
    TRY.
        EXEC SQL.
          CREATE FUNCTION selfunc( input CHAR(3) )
            RETURNING char(20);
            DEFINE output char(20);
            SELECT carrname
                   INTO output
                   FROM scarr
                   WHERE mandt  = '000' AND
                         carrid = input;
            RETURN output;
            END FUNCTION;
        ENDEXEC.
        LOOP AT s_carrid INTO s_carrid_wa
                         WHERE sign = 'I' AND option = 'EQ'.
          TRY.
             EXEC SQL.
                EXECUTE PROCEDURE selfunc( IN  :s_carrid_wa-low,
                                           OUT :name )
              ENDEXEC.
              WRITE: / s_carrid_wa-low, name.
            CATCH cx_sy_native_sql_error.
              MESSAGE `Error in procedure execution` TYPE 'I'.
          ENDTRY.
        ENDLOOP.
        EXEC SQL.
          DROP FUNCTION selfunc;
        ENDEXEC.
      CATCH cx_sy_native_sql_error.
        MESSAGE `Error in procedure handling` TYPE 'I'.
    ENDTRY.
    Reward points if usefull.
    Thanks and regards,
    Veerendranath.

  • Calling GUI Scripting from ABAP program

    Is it possible to call GUI Scripting from ABAP and thus to use GUI Scripting as an alternative to CALL TRANSACTION?
    Is the class CL_JAVA_SCRIPT suitable to access GUI Scripting engine? Accessing ABAP data object would work as well in this case as i think. What SAP Logon and WAS releases are required? Is the 6.20 release sufficient for this case?
    I would appreciate if somebody could post an example.

    Hi,
    CL_JAVA_SCRIPT has nothing to do with SAPGUI Scripting.
    Calling SAPGUI Scripting API from ABAP could be possible for programmes experienced with OLE automation calls from ABAP coding.
    The hardest thing will be, to access the scripting engine handle as an entry point. Once you have a handle in your abap session, any api function can be invoked.
    Best regards
    Jens
    BTW: SAP testtool eCATT does call SAPGUI-Scripting from ABAP.

  • How to Move file / call UNIX command using ABAP Program

    Hi, ABAP Guru.
    I need to Cut & Paste file (Move file from one location to another location) on Network Shared Drive using ABAP program.
    But I can't figured out how to do this and what ABAP Command / FM / Method (and maybe UNIX command) that being used.
    Please give me the advice.
    Best regard and Thank you all.
    Nattapash C.

    all methods for your requirements should be in class CL_GUI_FRONTEND_SERVICES

  • How to call the webservice in abap program

    Hi All,
    I have created a web service for my RFC .  The RFC has Import and export paramaters.
    I want call the same web service into my  ABAP REPORT and at the same time i want pass the values to webservice  and get the result from webservice in my abap report,
    Please help me  how to call the web service and pass the values and get the values?
    Highly appreciate your assitance.
    Thanks,
    Kishan

    Hi Kishan,
    You can refer to following help document,
    http://help.sap.com/saphelp_nw04/helpdata/en/bf/d005244e9d1d4d92b2fe7935556b4c/content.htm
    Regards,
    Meera

  • Call an URL with ABAP program (Method POST)

    Hi everyone,
      I need to call an URL for example "www.google.com?q=hello" with ABAP using POST method.
      Like the FM "Call_Browser", but my variable q=hello need to be passed with POST method.
    Any idea ?
    Thanks.

    here is one example I use from abap to call a web browser ITS solution with a project number, I guess you can adapt the it for your purpose?
          check <data>-pspid is not initial.
          concatenate gv_pfs_link
                      'zpfs2?~okcode=PROJ_SEL&zpspid=<###>&sel_action=X'
          into lv_url.
          replace '<###>' with <data>-pspid into lv_url.
          condense lv_url no-gaps.
          cl_gui_frontend_services=>execute(
            exporting document = lv_url ).

Maybe you are looking for