Calling specific put/get commands from the communication channel

Hello,
I need to execute a specific command to place or read the file from the bank file server.
The command for placing the file is something like this -
put localfilename %localfilename%SECUPGPENA%GPEXRIP%%B
I am trying to use the following command in the "Run Operating System Command Before Message Processing" section of the communication channel
"put %F %%F%SECUPGPENA%GPEXRIP%%B"
But the files are not being transferred.
I believe that I need to replace the actual message processing command by the given command by writing a script and calling it.
Please give me any pointers for solving the issue.
Regards,
Mayank

Hello,
Thanks for your response.
I have already gone through the above blogs.
The issue is that I need to replace the actual command used in the file transfer with the given put command.
Please let me know if there is a workaround for it.
Regards,
Mayank

Similar Messages

I am getting audio from the right channel only my iPad and it is distorted with static. How can I resolve this problem?

How do I adjust the audio output of my iPad? There is sound only from the right channel and it is distorted with static.

There is no adjustment as the iPad 2 speaker is on the right side only.

Channels not monitorable in the Communication Channel Monitor / RWB

Hi,
Back on XI after a long break ☺
I am facing an issue with our in-house JCA adapter used in XI scenarios. When trying to monitor the channels using our adapter from the Communication Channel Monitor in RWB, I have the following:
Status: NA
Short Log: No adapter registered for this channel
The adapter is deployed and the integration scenarios using it work perfectly:
- sda package deployed through the SDM
- the metadata defined in the Design
- a valid and working configuration involving the scenario is defined
The messages are going through and are monitorable in both SXMB_MONI and RWB...
All other channels using system adapters (File, RFC, SOAP) do display a status (as a color icon) and a Short Log and they can be administered (start/stop) using the enabled buttons when selected
From the Adapter Monitor page, our adapter has a green status, and all the channels configured to use it display the status, Name and Text information...
I have no idea what could be the issue should the adapter implement a special interface to be monitored from the RWB, is it a configuration issue, permissions issue???
I saw 2 posts with this error message but they did not help me to figure out where the issue is
Thanks for your help,
Adalbert
Edited by: Adalbert Wysocki on Apr 29, 2008 6:52 AM

Hi Gouri,
Thanks for your response, I will try would suggestion for testing... but
I am wondering why the namespace has to be http://sap.com/xi/XI/sample ???
It sounds weird that this namespace has to be fixed... as the purpose of a namespace is to create a isolation/container for names... so it needs to be customizable...
I did not see anything in the Adapter Development guides related to this kind of constraints...
Thanks,
Adalbert

Is there another way of getting apps from the appstore without putting your credit card number in, ive heard about the itunes gift card thing can anybody just give me more info about that and how i can buy free things free things from the appstorepls help

Is there another way of getting apps from the appstore without putting your credit card number in, ive heard about the itunes gift card thing can anybody just give me more info about that and how i can buy free things free things from the appstore...pls help as im only a teenager and have no credit credit and my parents dont trust me with theres and they dont care about the fact that you can set up a password/.... PLEASE SOMEONE HELP I WILL BE SO GRATEFUL... And i would really like to get the iphone 4 but if there is no way of etting apps without your credit number then i would have to get a samsung galaxy s3 maybe ...

You can set up an Apple ID without a credit card.
Create iTunes Store account without credit card - Support - Apple - http://support.apple.com/kb/ht2534

I am facing issue in Receiving incoming calls, Name not getting displayed though the same has been saved in my phone book!! I have done sync from Windows contacts.. please help if some1 knows how to rectify the issue...

I am facing issue in Receiving incoming calls, Name not getting displayed though the same has been saved in my phone book!! I have done sync from Windows contacts.. please help if some1 knows how to rectify the issue...

Has your carrier been having issues with Call Display? Do the telephone numbers come up when people call, or does it just show 'Unknown Number' or 'Blocked' ?

I have win7, outlook 2007 tried to sync with icloud but i get an error message and the calendar is blank. Thanks apple? Any suggestions from the community?

I have win7, outlook 2007 tried to sync with icloud but I get an error message and my calendar is blank. I do not see my outlook calendar, on the left pane under all calandar I see my me account checked and all others are unchecked. I looked at icloud and all the data is in and the iphones syncl with ipad but something is not right with my PC Outlook. I cannot get back to the good old mobileme. Thanks APPLE? Any suggestions from the community?

This issue can be caused by corrupted cookies.
Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
* http://kb.mozillazine.org/The_page_is_not_redirecting_properly

I only get sound from the computer's speakers even though I put in headphones

I have for a while now had the problem that I only get sound from the computer's speakers even though i plug in the headphones, I have rebooted the computer but still the same problem occurs. So i thought there might be someting wrong in the settings, when i open the soundsettings and plug in my headphones nothing happens, usually I believe there should be a text appearing that says that the sound is now going to headphones, am I right? any how, it still just sends the sound out to the speakers and there is no option to send it else where then "soundflower 2ch and soundflower 16ch".
I do have an external sound card, for music recording, that goes through USB, and when i plug that in i get the option to send the sound to that device and also to recive sound and i can also choose if i want to sent it to the computer's speakers. So could it be someting wrong with the headphone jack?

Good day!
Thank you for writing to the Dell Community Forum.
Boot into the System Bios and make sure that Onboard Devices- Integrated Audio is On. Then exit the System Bios saving the change. Once back into Windows, open the Device Manager and make sure that ADI1983 HDA appears under Sound devices. Then re-test the rear green audio jack #4 using headphones. Also, reply to this post with the service tag of the system sent via private message so that I can look into the details of the system and assist you better.
Have a great day ahead.

Gpib GET command using the GPIB ActiveX Control

Is there a way to trigger multiple instruments via the gpib 'GET' command using the GPIB activeX control for Visual Basic?

Hello,
I'm a bit confused as to what GET command you are trying to use. Where is this command located? Also, what are you trying to accomplish through use of this function?
GPIB can control multiple instruments through the activeX control for Visual Basic. More information about specific commands can be found in the help files. On your Desktop, click [Start]>>[All Programs]>>[National Instruments]>>[NI 488.2]>>[NI 488.2 Help]. Now, under the "Contents" tab, click [Contents]>>[Multiple Device NI-488.2 Calls]. A list of multiple device function calls can now be referenced for help in performing your desired action within Visual Basic.
I hope this helps. Please let me know if I can further assist you.
Best Regards,
Joe Des Rosier
National Instrument
s

Could you please tell me why as a Brit resident in Japan therefore having a billing address that is Japanese is forced to only get service from the Japanese online store? Is there not some way of allowing me to select movies and music to buy and download

Could you please tell me why as a Brit resident in Japan therefore having a billing address that is Japanese is forced to only get service from the Japanese online store? Is there not some way of allowing me to select movies and music to buy and download from other stores. Why do am i forced to try to nread Japanese when I have selected English as my language. The price for Downloads is no different and even if it was I am happy to pay. This also applies to Movie rental which is crazy and extremely restrictive. I a supposed GLOBAL community why does Apple do this.

You can buy ONLY from the itunes store of your country of residence (As proven by valid billing address of credit card) and ONLY while inside the borders of that country.
These are the terms of the itunes store.

How can I make firefox work wisth a windows xp computer? I don't have an address bar , a backup key. I can get away from the firefox add-on screen. It is basically inoperable

After installing the new version of Firefox on an Windows xp computer I cannot use the internet. There is no address bar for entering a URL, there's not back up arrow, I can't get away from the Firefox add-on screne.

Make sure that you do not run Firefox in full screen mode (press F11 or Fn + F11 to toggle; Mac: command+Shift+F).
If the menu bar is hidden then press the F10 key or hold down the Alt key to make the menu bar appear.
Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible: "View > Toolbars"
*Open the Customize window via "View > Toolbars > Customize"
*If missing items are in the toolbar palette then drag them back from the Customize window on the toolbar
*If you do not see an item on a toolbar and in the toolbar palette then click the "Restore Default Set" button to restore the default toolbar set up
*http://kb.mozillazine.org/Toolbar_customization
*https://support.mozilla.org/kb/Back+and+forward+or+other+toolbar+items+are+missing

Hi, just updated hubby's iPhone 4 and all of his music has disappeared from the iPhone and from the iTunes library! He does have music still stored on his iPod, but can't get it from the library on his iPod back to phone or itunes. technophobe help pls!

and all of his music has disappeared from the iPhone and from the iTunes library! Luckily he does have music still stored on his iPod, but I can't get it from the library on his iPod back to the phone or to itunes.Please help, but technophobe so put it in simple english please!

Sounds like the music you had on your phone was not the same music on his computer. The iPhone/iPod touch is not designed to be a storage device. When you sync with a computer that doesn't have your music, it deletes your music from your phone.
Was this music you purchased from iTunes? if so, and you are in the US, tap on itunes app, tap updates, tap purchased and tap on the cloud icon to get each song back. If you're not int he us, get iOS5 update later this week and do the same.
But you need to move your itunes library to his computer. Create a user account on his macbook pro for you. From your external drive backup, load your itunes library on it. Then sync as usual! (Don't tell me you don't have a backup for your computer!)

How do I get photos from the iPhoto import folder to the iPhoto library? It uploaded, but hung while deleting from my camera, so no imported photos are in the iPhoto library.

How do I get photos from the iPhoto import folder to the iPhoto library? It uploaded, but hung while deleting from my camera, so no imported photos are in the iPhoto library. I watched it upload about 400 photos, one by one. They're somewhere, but they don't appear in the iPhoto library. As iPhoto was deleting them from my camera, it got hung up, then a message came "you should eject before disconnecting a device." I hadn't touched the camera. The message came by itself. I couldn't get iPhoto to respond, so I disconnected the camera and did a Force Quit. Opening it back up, the pictures were gone. Can somebody help me?

What version of iPhoto are you running? Assuming it's iPhoto 9 or later Apply the two fixes below in order as needed:
Fix #1
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - run Option #4 to rebuild the database.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button and select the library you want to add in the selection window..
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

Call a Form using Webutil from the Menu loose focus on the applet

Hello,
I have the following problem:
When calling a form using webutil from the menu the focus on the applet (I mean the Forms Application window) is lost and I have to click on the window to get back the focus on the application.
Any advice ?
Env: Forms 9i / Webutil 1.06
Rgds,
Philippe

Try to use the NO_HIDE parameter in the CALL_FORM() built-in.
Call_Form( 'the_form', NO_HIDE ) ;Or maybe, in the[b] When-New-Form-Instance trigger of the called form, return the focus to the calling form
Go_Form( Get_Application_Property( CALLING_FORM ) ) ;Francois

Start and stop the Communication channel from Java Mapping

How to start and stop the Communication channel from Java Mapping in XI 3.0
Scenario PI - > MQ -> Third Party web application
Web application is down and then Communication channels are stop manually .
We need to automate this process,
MQ Solution - Trigger will be set in MQ which will be called when web application is stopped
Trigger will send u201CSTOP u201C message to PI
How to configure PI scenario to stop different com channels when this message received ?

check this link: http://help.sap.com/saphelp_nw04/helpdata/EN/45/0c86aab4d14dece10000000a11466f/frameset.htm
make sure that MQ send http request to PI. i dont think a configuration scenario is required in PI. Only roles should be enabled with proper user provided to MQ team.
However, for security reasons, you can configure a scenario if you dont want to expose PI infrastructure directly to 3rd parties.

Two statements, get results from the first statement?

Ok maybe I made it sound a little harder than it is, but this is what I am trying to do. I have a result set from from a database call when I pass in the username and password . In the 1st call I get the Users info: User_ID, first_name, lastname, etc...
But I either need to get info from the first statement, and pass it to the 2nd statement or just do two statement calls calling the same info and passing it to my user object? I dont know which if any is faster, or better. The only thing I need from the first statement is the user_id. In the 2nd statement I need the user_id to find out the user permissions.
Here is the original code when It was getting the user info and permissions from the same table. try
           dba = new DbAccess();
           java.sql.Connection con = dba.getConnection();
java.sql.DriverManager.getConnection("jdbc:oracle:thin:@kares:1523:appd","user","pass");
           ps = con.prepareStatement("SELECT USER_ID, LAST_NAME, FIRST_NAME, LOGIN, PASSWORD," +
           "X, Y, Z FROM RD_USERS WHERE LOGIN=? and PASSWORD=?");
           ps.setString(1, user);
           ps.setString(2, pass);
           rs = ps.executeQuery();
           // set the user attributes
           if ( rs.next() )
              loginValid = true;
              setUserId(rs.getInt("USER_ID"));
              setLastName(rs.getString("LAST_NAME"));
              setFirstName(rs.getString("FIRST_NAME"));
              setLoginName(rs.getString("LOGIN"));
              setPassword(rs.getString("PASSWORD"));
              X = rs.getBoolean("X");
              setX(X);
              Y = rs.getBoolean("Y");
              setY(Y);
              Z = rs.getBoolean("Z");
              setZ(Z);
           else
              setLastName(null);
              setFirstName(null);
              setLoginName(null);
              setPassword(null);
              setX(false);
              setY(false);
              setZ(false);
           rs.close(); rs = null;
           ps.close(); ps = null;
           //dba.close(); dba = null;
        } The code above gets the info from one table, I now need to get the X, Y, and Z from a different table, but I need the USER_ID first. So, the first table is set up with the user_id and user info, and the 2nd table is set up with the user_id and user permissions

Thanks DrClap I started on the the query and I did it a little differently, but it should hopefull do the same thing. my tables are constructed as so:
USER
     USER_ID
     FIRST_NAME
     LAST_NAME
     USER_NAME
     PASSWORD
     ETC....
USER_PERMISSIONS
     USER_ID
     PERMISSION X
     PERMISSION Y
     PERMISSION Z
     ETC....
My Select looks something like this
ps = con.prepareStatement("SELECT a.USER_ID, a.LAST_NAME, a.FIRST_NAME, a.USER_NAME, a.USER_PASSWORD," +
           "b.X, b.Y, b.Z FROM RD_USERS a, RD_PERMISSIONS b WHERE USER_NAME=? and USER_PASSWORD=?");
This is where I come to a crossroads, Can I add on another AND to say "WHERE a.USER_ID = b.USER_ID
and do I use the =, or is it ==, or .equals(). Thanks in advance.
orozcom

Calling specific put/get commands from the communication channel

Similar Messages

Maybe you are looking for