Call a Form using Webutil from the Menu loose focus on the applet

Hello,
I have the following problem:
When calling a form using webutil from the menu the focus on the applet (I mean the Forms Application window) is lost and I have to click on the window to get back the focus on the application.
Any advice ?
Env: Forms 9i / Webutil 1.06
Rgds,
Philippe

Try to use the NO_HIDE parameter in the CALL_FORM() built-in.
Call_Form( 'the_form', NO_HIDE ) ;Or maybe, in the[b] When-New-Form-Instance trigger of the called form, return the focus to the calling form
Go_Form( Get_Application_Property( CALLING_FORM ) ) ;Francois

Similar Messages

  • I created a form using acrobat XI pro.  SOME users of the form cannot save the form.  what can i do from my side to 'correct' the issue?

    i created a form using acrobat XI pro.  SOME users of the form cannot save the form.  what can i do from my side to 'correct' the issue?

    Do you know what PDF viewer those users were using? Do you have any more details about what happens when they attempt to save?

  • At the time of call when i use speaker my sound is not visible to the prsn i call

    at the time of call when i use speaker my sound is not visible to the prsn i call

    Hello smarty007,
    Thanks for the question, and welcome to Apple Support Communities.
    From your description, it sounds like you are having issues with others hearing you while using speakerphone. For these symptoms, the following article provides the most relevant information. On the iPhone 4, it is commonly due to a third-party case blocking the top microphone:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Additionally, you can check out these articles:
    iPhone: Sound muffled or low from the speaker or when speaking into the mic
    http://support.apple.com/kb/TS1631
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    Thanks,
    Matt M.

  • I created an iMovie using pictures from my camera roll, I exported the movie to the camera roll and then deleted all of the pictures. Now I can't get the movie to play. Did deleting the pictures cause my IMovie to disappear? How can I get my movie back?

    I created an iMovie using pictures from my camera roll, I exported the movie to the camera roll and then deleted all of the pictures. Now I can't get the movie to play. Did deleting the pictures cause my IMovie to disappear? How can I get my movie back?

    Download and open this program, lets you look around your I phone as if it was a disc drive, might find em in the iphones drive.
    http://www.macroplant.com/iexplorer/

  • Impossible to update the softwares from the top CC menu. First the menu does'nt show the software on my computers and after a while of seaching, the icon disapear from the menu and no uptade. Can someone tell me why. Thank you

    Impossible to update the softwares from the top CC menu. First the menu does'nt show the software on my computers and after a while of seaching, the icon disapear from the menu and no uptade. Can someone tell me why. Thank you

    This is an open forum with a mix of other users and Adobe staff, not Adobe support... you need Adobe support
    Adobe contact information - http://helpx.adobe.com/contact.html may help
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"

  • Showing the Date (month & day) in the Menu Bar, Not just the Day of the Wee

    Since upgrading to 10.5 from 10.4, I've noticed that the menu bar no longer shows the date (month and day, it just shows the day of the week.
    Is there a way to get the menu bar to show the month and day again as it did in 10.4?

    Tiger had to be changed in the same way as Leopard.
    Start by opening the International Preferences panel, and clicking the Formats tab.
    In the Dates section, click Customize. Click the Show pop-up and select your choice of Short, Medium, etc. Now place the elements you want in the small "work area," by dragging and dropping them from the Date Elements section. Once placed, you can click on some elements to see other options (Wednesday or Wed, for instance). Once you've built the date string you want, click once in the work area, and hit Command-A then Command-C to select the string and copy it. Now click Cancel to close the window without making any changes.
    In the Times section, click Customize, and set the Show pop-up to Medium. In the small work area below the pop-up, place the curser where you want the date elements to start, and click to position the cursor. Now hit Command-V to paste the elements you just copied. You can further add characters and spaces to customize the look. If you want to remove an element (i.e. the year), click on it and use the Delete key. Click OK, and you'll see the results in the menubar.
    S.

  • [Nokia] i want the menu that was before the upgrad...

    I want the menu that was when the phone was opened on orizontal

    I'm going to have to agree here on the point of allowing the user to choose what happens. Media key or not... some people want their slide to perform certain functions, some do not. I would like to be able to choose (to have it do nothing) and other N-Series phones have these options already.
    It is a huge omission on Nokia's part; the non-inclusion of features like this so as not to bedazzle users with too many options needn't be an issue either - if users aren't savvy enough to use it then they can ignore it. Nokia have no problem in hiding advanced options from users for example in the WiFi settings... I can't think of any other reason why this was not put - except perhaps laziness/not making the phone too good so people will want to buy future models...

  • I have an older iPod that no longer shows up in iTunes or appears to be charging.  When I press the Menu and Select buttons, the Apple logo appears and then an icon of a battery with an exclamation point.  Is it dead for good?

    I have an older iPod that no longer shows up in iTunes or appears to be charging.  When I press the Menu and Select buttons, the Apple logo appears and then an icon of a battery with an exclamation point.  Is it dead for good?

    If it is otherwise working, you can change the battery.  If you want to do it yourself, you can buy the part on eBay and other online sources.  Just make sure you know the type of iPod you have so that you get the right part.
    http://support.apple.com/kb/HT1353
    There are online guides, including the ones on this web site
    http://www.ifixit.com/Device/iPod
    (Note:  Most replacement batteries come with plastic/nylon tools seen in the guides.)
    You can also have a repair business do the work.
    If it is just the battery, if you do a Reset (using the Menu and Select buttons) while it is connect to your computer, I think it should still be recognized by iTunes.

  • Keep exiting to the menu itself (while pressing the camera roll button) when trying to upload photos in iMessages or Facebook.

    Keep exiting to the menu itself (while pressing the camera roll button) when trying to upload photos in iMessages or Facebook.

    Here is an article from the apple support website that might help out.
    http://support.apple.com/kb/TS1502

  • Press the Menu button after stopping the video does not go back to Menu

    Hello,
    Small problem on a DVD burnt with DVD Studio Pro: when a track is playing, pressing the Menu button gets the user back to the Menu (good); but if the user has pressed Stop first, DVDplayer refuses to go back to the menu and says "unauthorized".
    Is there a setting somewhere in DVD Studio Pro to correct this before I burn other DVDs of my project?
    thank you

    On one Studio DVD after pushing stop I was able to get to the menu by pushing the menu button.
    There are no authoring options in DSP to accomplish this.
    Replicated disks play nicer with most players than DVD-R. It could be related to the type of -R media. Most studio releases are created in Senaris and many studios make authors sign a contract that says they will not use DSP to create studio released DVDs.

  • My IPhone does not show up under Devices in I Tunes when I plug it into my computer. "Devices" no longer appears on the menu at all down the side of the page.

    My IPhone does not show up under Devices in I Tunes when I plug it into my computer. "Devices" no longer appears on the menu at all down the side of the page.

    Hope this helps:
    http://www.apple.com/support/iphone/assistant/itunes/

  • Need Help in finding the Menu Path's for the below topics

    Hi,
    Where can i get the menu paths for the below topics in SAP syste. I have searched in the system,But couldnot find the Menu Path's for the below topics.Kindly help me in finding the configuration Path for the below...
    1)Public tendering process
    2)Grants Management
    3)Tax & Revenue management
    4)Public sector accounting --> Budget formulation, preparation, execution & Monitoring.
    Thanks
    Rajitha M

    Hi,
    Check for the relevant path in IMG in Public Sector Management.  The prerequisites being configuration of Financial accounting
    sub modules.
    Best Regards,
    Sadashivan

  • I have dual displays.  My dock is on the MBP bottom and the menu bar is on the extended monitors top.

    I have a Dell 2408 acting as the main display and a 15" MBP.  For some reason, today the dock ended up on the MBP screen at the bottom and the menu bar is on the Dell at the top.  I can't seem to move the dock back to the Dell.  Can someone help?  I tried moving the menu bar to the MBP and then back, hoping the dock would follow but no luck.
    Thanks for your help.

    When the dock is defined as on the bottom, it will appear on the screen of the extended desktop that is lowest.
    Move the second monitor where the bottom edges are equal or the Dell is lower and the dock will move there.
    Regards,
    Captfred

  • I have a new lion server and 4 lion laptops. The laptops loose connection to the shared documents and printers from the server after roughly 1 hour. By disconnecting and re-connecting wireless the connection is regained to shares and printers

    I have a new lion server and 4 lion laptops. The laptops loose connection to the shared documents and printers from the server after roughly 1 hour. By disconnecting and re-connecting wireless the connection is regained to shares and printers. We can still surf the web when it goes down.

    Ok 1st one. The warning restriction message relates to this line in main.cf:
    smtpd_helo_restrictions = permit_sasl_authenticated  permit_mynetworks  check_helo_access hash:/etc/postfix/helo_access  reject_non_fqdn_hostname  reject_invalid_hostname  permit reject_invalid_helo_hostname
    The last reject occurs after the single word "permit" and is ignored.
    However, that's not the problem.
    I'm not exactly sure what's happening, but this might be a clue.
    It would appear that either postfix is not being able to create the socket for private/policy or it's somehow created with the wrong permissions.  You might need to ramp up the debug level to get a better idea.
    You could check if it's being created by "netstat -a | grep private/policy" in terminal.
    My guess is that it's not being created because there is no setup statement in your master.cf file, but I don't understand why postfix would be looking for it if it isn't set up.  Private/policy I think relates to grey listing.  Maybe gives you a hint.

  • After getting my software update for safari yesterday (version 6.0) I've lost the google search bar on my menu bar.  I've tried customizing the menu bar by dragging the google search bar to the menu bar, but no luck.  How can I get the google search bar b

    After getting my software update for safari yesterday (version 6.0) I've lost the google search bar on my menu bar.  I've tried customizing the menu bar by dragging the google search bar to the menu bar, but no luck.  How can I get the google search bar back?

    You can't. It's now integrated with the URL bar. It's a search/URL combo.

Maybe you are looking for