Calling transaction MB03, ME53N and ME23N in SRM (Suppliers Relationship M)

Hi Experts,
I would like to ask if there are any ways or possibilities that I can call the transactions MB03, ME53N and ME23N in SRM system?
Those transactions mentioned are in ERP and there's a report program that displays the list of PO/GR/PR numbers in SRM and once the user doubled-click in one of those doc. numbers.. those transaction should be called..
How can I satisfy this criteria? Is it possible even if those transactions are not found in SRM system? Do we have the equivalent of those transactions in SRM?
Thanks in advance!

Hi,
I propose you to learn from this easy weblog.
I have tested it and it works.
/people/durairaj.athavanraja/blog/2005/08/21/running-your-first-its-webgui-application-in-sap-netweaver-04-abap-edition--nsp
The only variant here is that you will have to doit in ECC or R/3 and then add this to a transction directly in SRM PFCG.
Be careful, webgui transaction requires 10 times more bandwitch than sapgui.
Kind regards,
Yann

Similar Messages

Call transaction mode 'A' and mode 'N'

Hi all
In my below mentioned code statement bdc call transaction eg33 mode 'A' is working fine in both programs main program and called(submit) program (highlighted here). But if I give mode 'N' in both called and calling program call transaction the called program using submit is not at all called. Suggest me what to do if i want to run it in background.Write now its runing in foreground and user has to press enter many times which i want to avoid.
REPORT zac_eg33 NO STANDARD PAGE HEADING
                 LINE-SIZE 100.
TABLES: EABL,
        BUT000,
        ZISUH0003.
DATA: IT_STATUS TYPE ZISUH0003.
DATA: G_INDEX TYPE I,
      G_START_COL TYPE I VALUE '1',      "start column
      G_START_ROW TYPE I VALUE '14',      "start row
      G_END_COL   TYPE I VALUE '18',     "maximum column
      G_END_ROW   TYPE I VALUE '75', "maximum row
      G_TEXT(20),                         "stores error messages
      G_PAGES        TYPE I,
      G_CURRENT_PAGE TYPE I,
      G_COUNT LIKE SY-DBCNT.
data: l_file   type file_table,
      file1    type string,
      l_title type string,
      LENGTH   TYPE I,
      FILES    type filetable,
      SUBRC    type i,
      STR_FILE type STRING,
      D_FILE   type RLGRAP-FILENAME,
      filename TYPE String,
      L_itab_date(10).
FIELD-SYMBOLS : <FS>.
DATA msgtext(80).
DATA: IT_EXCEL LIKE STANDARD TABLE OF ALSMEX_TABLINE WITH HEADER LINE,
      IT_MESS TYPE STANDARD TABLE OF BDCMSGCOLL WITH HEADER LINE.
TYPES: BEGIN OF TY_OPEN,
        HAUS LIKE REG30-HAUS,
        EADAT(10),
        GERAETNEU LIKE REG30-GERAETNEU,
        MESSDRCK LIKE REG30-MESSDRCK,
        ZWSTANDCE LIKE REG30-ZWSTANDCE,
        XYZ LIKE EGPLD-DEVLOC,
      END OF TY_OPEN.
DATA : T_ANLAGE LIKE EANLD-ANLAGE,
       VSTELLE LIKE EVBS-VSTELLE,
       S_ANLAGE LIKE EANLD-ANLAGE,
       temp_c(7).
DATA: IT_OPEN TYPE STANDARD TABLE OF TY_OPEN WITH HEADER LINE.
DATA: BDCDATA1 TYPE STANDARD TABLE OF BDCDATA WITH HEADER LINE.
SELECTION-SCREEN BEGIN OF BLOCK 1 WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN SKIP 2.
PARAMETERS: P_FILE like RLGRAP-FILENAME OBLIGATORY.
SELECTION-SCREEN SKIP 2.
SELECTION-SCREEN END OF BLOCK 1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE .
PERFORM GET_FILE_NAME.
MOVE FILENAME TO P_FILE.
*START-OF-SELECTION.
*CLEAR IT_EXCEL.
START-OF-SELECTION.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
    FILENAME                      = p_file
    I_BEGIN_COL                   = 1 "VF_START_COL
    I_BEGIN_ROW                   = 2 "VF_START_ROW
    I_END_COL                     = 5 "VF_END_COL
    I_END_ROW                     = 10000 "VF_END_ROW
TABLES
    INTERN                        = IT_EXCEL
EXCEPTIONS
    INCONSISTENT_PARAMETERS       = 1
    UPLOAD_OLE                    = 2
    OTHERS                        = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF IT_EXCEL[] IS INITIAL.
G_TEXT = 'No Data Uploaded'.
ELSE.
SORT IT_EXCEL BY ROW COL.
LOOP AT IT_EXCEL.
    MOVE : IT_EXCEL-COL TO G_INDEX.
    ASSIGN COMPONENT G_INDEX OF STRUCTURE IT_OPEN TO <FS>.
    MOVE IT_EXCEL-VALUE TO <FS>.
    AT END OF ROW.
      IF NOT IT_OPEN IS INITIAL.
      APPEND IT_OPEN." TO IT_LINE.
      CLEAR IT_OPEN.
      CLEAR IT_EXCEL.
      ENDIF.
    ENDAT.
ENDLOOP.
ENDIF.
REFRESH IT_EXCEL.
ULINE.
FORMAT COLOR 3 ON.
WRITE: /1 sy-vline ,
       2 'Material No.' ,
       25 sy-vline,
        2 'Logs' ,
        100 sy-vline.
uline.
FORMAT COLOR OFF.
LOOP AT IT_OPEN.
REFRESH BDCDATA1.
clear : temp_c.
move it_open-MESSDRCK to temp_c.
condense : temp_c.
PERFORM MAP1.
*CALL TRANSACTION 'EG33' USING BDCDATA1 MODE 'A' MESSAGES INTO IT_MESS.
GET PARAMETER ID 'GEP' FIELD it_open-XYZ.
SET PARAMETER ID 'IFL' FIELD it_open-XYZ.
*MESSAGE X003(IA) INTO msgtext.
*IF MSGTEXT = 'Only single installation is allowed at functional location &'.
*EXIT.
*ELSE.
SUBMIT ZIL02_BDC and return.*
ENDIF.
DATA: G_INSNO LIKE IT_OPEN-HAUS.
IF NOT IT_MESS[] IS INITIAL.
G_INSNO = IT_OPEN-HAUS.
PERFORM GET_MESSAGES TABLES IT_MESS USING G_INSNO." IT_LINE.
ENDIF.
READ TABLE IT_MESS WITH KEY MSGTYP = 'E'.
IF SY-SUBRC NE 0.
READ TABLE IT_MESS WITH KEY MSGTYP = 'S' MSGNR = '622'.
IF SY-SUBRC EQ 0.
SELECT SINGLE VSTELLE FROM EVBS INTO VSTELLE WHERE HAUS = IT_OPEN-HAUS.
SELECT SINGLE ANLAGE FROM EANL INTO T_ANLAGE WHERE VSTELLE = VSTELLE.
MOVE T_ANLAGE TO IT_STATUS-ANLAGE.
MOVE 'X' TO IT_STATUS-RFC.
*perform get_date_format using IT_OPEN-EADAT.
MOVE IT_OPEN-EADAT TO IT_STATUS-ADATE.
SELECT SINGLE ANLAGE FROM ZISUH0003 INTO S_ANLAGE WHERE ANLAGE =
T_ANLAGE.
IF SY-SUBRC EQ 4.
    INSERT ZISUH0003 FROM IT_STATUS.
ELSE.
    UPDATE ZISUH0003 FROM IT_STATUS.
ENDIF.
ENDIF.
ENDIF.
REFRESH IT_MESS.
CLEAR   IT_MESS.
ENDLOOP.
*PERFORM BDC_OPEN_READING.
MESSAGE S013(ZPS).
*&      Form GET_FILE_NAME
      text
--> p1        text
<-- p2        text
FORM GET_FILE_NAME .
REFRESH FILES.
call method cl_gui_frontend_services=>file_open_dialog
            exporting
              window_title            = l_title
            changing
              file_table              = files
              rc                      = subrc
            exceptions
              file_open_dialog_failed = 1
              cntl_error              = 2
              error_no_gui            = 3
              others                  = 4.
          check sy-subrc = 0.
          loop at files into l_file.
            str_file = l_file.
            move str_file to filename.
            exit.
          endloop.
ENDFORM.                    " GET_FILE_NAME
*&      Form BDC_OPEN_READING
      text
--> p1        text
<-- p2        text
FORM BDC_OPEN_READING .
*DATA: G_INSNO LIKE IT_OPEN-HAUS.
*IF NOT IT_MESS[] IS INITIAL.
G_INSNO = IT_OPEN-HAUS.
PERFORM GET_MESSAGES TABLES IT_MESS USING G_INSNO." IT_LINE.
*ENDIF.
*READ TABLE IT_MESS WITH KEY MSGTYP = 'E'.
*IF SY-SUBRC NE 0.
*READ TABLE IT_MESS WITH KEY MSGTYP = 'S' MSGNR = '622'.
*IF SY-SUBRC EQ 0.
*SELECT SINGLE VSTELLE FROM EVBS INTO VSTELLE WHERE HAUS = IT_OPEN-HAUS.
*SELECT SINGLE ANLAGE FROM EANL INTO T_ANLAGE WHERE VSTELLE = VSTELLE.
*MOVE T_ANLAGE TO IT_STATUS-ANLAGE.
*MOVE 'X' TO IT_STATUS-RFC.
**perform get_date_format using IT_OPEN-EADAT.
*MOVE IT_OPEN-EADAT TO IT_STATUS-ADATE.
*SELECT SINGLE ANLAGE FROM ZISUH0003 INTO S_ANLAGE WHERE ANLAGE =
*T_ANLAGE.
IF SY-SUBRC EQ 4.
   INSERT ZISUH0003 FROM IT_STATUS.
ELSE.
   UPDATE ZISUH0003 FROM IT_STATUS.
ENDIF.
ENDIF.
ENDIF.
REFRESH IT_MESS.
CLEAR   IT_MESS.
*ENDLOOP.
ENDFORM.                    " BDC_OPEN_READING
       Start new screen                                              *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR BDCDATA1.
BDCDATA1-PROGRAM = PROGRAM.
BDCDATA1-DYNPRO   = DYNPRO.
BDCDATA1-DYNBEGIN = 'X'.
APPEND BDCDATA1.
ENDFORM.
       Insert field                                                  *
FORM BDC_FIELD USING FNAM FVAL.
IF FVAL <> SPACE.
    CLEAR BDCDATA1.
    BDCDATA1-FNAM = FNAM.
    BDCDATA1-FVAL = FVAL.
    APPEND BDCDATA1.
ENDIF.
ENDFORM.
*&      Form MAP1
      text
--> p1        text
<-- p2        text
FORM MAP1 .
perform bdc_dynpro      using 'SAPLE30D' '0100'.
perform bdc_field       using 'BDC_CURSOR'
                              'REG30-GERAETNEU'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'REG30-HAUS'
                              IT_OPEN-HAUS. "'100000000033'.
perform bdc_field       using 'REG30-EADAT'
                              IT_OPEN-EADAT. "'18.02.2006'.
perform bdc_field       using 'REG30-GERAETNEU'
                              IT_OPEN-GERAETNEU. "'66a'.
perform bdc_dynpro      using 'SAPLE30D' '0220'.
perform bdc_field       using 'BDC_CURSOR'
                              'REG30-TEMP_AREA(02)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=SAVE'.
perform bdc_field       using 'REG30-MESSDRCK'
                               temp_c. "IT_OPEN-MESSDRCK'0.0125'.
perform bdc_field       using 'REG30-GERWECHS'
                              '05'.
perform bdc_field       using 'REG30-ANZDAYSOFPERIOD(01)'
                              '30'.
perform bdc_field       using 'REG30-ZWSTANDCE(01)'
                              IT_OPEN-ZWSTANDCE. "'10'.
perform bdc_field       using 'REG30-ZWSTANDCE(02)'
                              '0'.
perform bdc_field       using 'REG30-PERVERBR(01)'
                              '0'.
perform bdc_field       using 'REG30-PERVERBR(02)'
                              '0'.
perform bdc_field       using 'REG30-TEMP_AREA(01)'
                              '0001'.
perform bdc_field       using 'REG30-TEMP_AREA(02)'
                              '0001'.
perform bdc_field       using 'REG30-PR_AREA_AI(01)'
                              '0001'.
perform bdc_field       using 'REG30-PR_AREA_AI(02)'
                              '0001'.
ENDFORM.                    " MAP1
*&      Form get_date_format
      text
     -->P_IT_ORDER_TABLE_C_DATE text
FORM get_date_format USING L_ITAB_DATE." LIKE SY-DATUM.
data: d_temp(4),
      m_temp(2),
      y_temp(4).
*move L_ITAB_DATE to L_ITAB_DATE.
y_temp = L_ITAB_DATE(4).
m_temp = L_ITAB_DATE+4(2).
d_temp = L_ITAB_DATE+6(2).
CONCATENATE d_temp '.' m_temp '.' y_temp into L_ITAB_DATE.
ENDFORM.                    " get_date_format
*&      Form GET_MESSAGES
      text
     -->P_IT_MESS text
     -->P_G_INSNO text
FORM GET_MESSAGES TABLES IT_MESS STRUCTURE BDCMSGCOLL USING G_INSNO .
TABLES T100.
DATA: L_MSTRING(255).
LOOP AT IT_MESS WHERE MSGTYP = 'E'   OR MSGTYP = 'S'.
      SELECT SINGLE * FROM T100 WHERE SPRSL = IT_MESS-MSGSPRA
                                AND   ARBGB = IT_MESS-MSGID
                                AND   MSGNR = IT_MESS-MSGNR.
      IF SY-SUBRC = 0.
        L_MSTRING = T100-TEXT.
        IF L_MSTRING CS '&1'.
          REPLACE '&1' WITH IT_MESS-MSGV1 INTO L_MSTRING.
          REPLACE '&2' WITH IT_MESS-MSGV2 INTO L_MSTRING.
          REPLACE '&3' WITH IT_MESS-MSGV3 INTO L_MSTRING.
          REPLACE '&4' WITH IT_MESS-MSGV4 INTO L_MSTRING.
        ELSE.
          REPLACE '&' WITH IT_MESS-MSGV1 INTO L_MSTRING.
          REPLACE '&' WITH IT_MESS-MSGV2 INTO L_MSTRING.
          REPLACE '&' WITH IT_MESS-MSGV3 INTO L_MSTRING.
          REPLACE '&' WITH IT_MESS-MSGV4 INTO L_MSTRING.
        ENDIF.
        CONDENSE L_MSTRING.
      ENDIF.
      CONDENSE G_INSNO.
      CONCATENATE 'For' ' ' G_INSNO ',' L_MSTRING INTO L_MSTRING SEPARATED BY SPACE.
FORMAT COLOR 2 ON.
*IF IT_MESS-MSGTYP = 'S' AND IT_MESS-MSGNR = '622'.
*WRITE: 1 sy-vline,
        L_MSTRING    under 'Error Messages',
       100 sy-vline.
*ULINE.
*ELSEIF IT_MESS-MSGTYP = 'E'.
WRITE: 1 sy-vline,
         L_MSTRING    under 'Logs',
        100 sy-vline.
ULINE.
*ENDIF.
ENDLOOP.
ENDFORM.                    " GET_MESSAGES
code for ZIL02_BDC
.report ZIL02_BDC
       no standard page heading line-size 255.
*data : XYZ LIKE EGPLD-DEVLOC.
TYPES: BEGIN OF TY_OPEN,
        HAUS LIKE REG30-HAUS,
        EADAT(10),
        GERAETNEU LIKE REG30-GERAETNEU,
        MESSDRCK LIKE REG30-MESSDRCK,
        ZWSTANDCE LIKE REG30-ZWSTANDCE,
        XYZ LIKE EGPLD-DEVLOC,
      END OF TY_OPEN.
DATA: IT_OPEN TYPE STANDARD TABLE OF TY_OPEN WITH HEADER LINE.
DATA: BDCDATA TYPE STANDARD TABLE OF BDCDATA WITH HEADER LINE.
GET PARAMETER ID 'GEP' FIELD it_open-XYZ.
DATA : IT_MESS TYPE STANDARD TABLE OF BDCMSGCOLL WITH HEADER LINE.
*include bdcrecx1.
start-of-selection.
perform bdc_dynpro      using 'SAPMILO0' '1110'.
perform bdc_field       using 'BDC_CURSOR'
                              'IFLO-TPLNR'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'IFLO-TPLNR'
                              it_open-xyz.
perform bdc_field       using 'RILO0-TPLKZ'
                              'AO_GP'.
perform bdc_dynpro      using 'SAPMILO0' '2100'.
perform bdc_field       using 'BDC_CURSOR'
                              'IFLO-PLTXT'.
perform bdc_field       using 'BDC_OKCODE'
                              '=T\04'.
perform bdc_field       using 'IFLO-PLTXT'
                              'DEVICE LOCATION'.
perform bdc_dynpro      using 'SAPMILO0' '2100'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'IFLO-PLTXT'
                              'DEVICE LOCATION'.
perform bdc_field       using 'BDC_CURSOR'
                              'ITOBATTR-EINZL'.
perform bdc_field       using 'ITOBATTR-IEQUI'
                              'X'.
perform bdc_field       using 'ITOBATTR-EINZL'
                              'X'.
perform bdc_dynpro      using 'SAPMILO0' '2100'.
perform bdc_field       using 'BDC_OKCODE'
                              '=BU'.
perform bdc_field       using 'IFLO-PLTXT'
                              'DEVICE LOCATION'.
perform bdc_field       using 'BDC_CURSOR'
                              'ITOBATTR-EINZL'.
perform bdc_field       using 'ITOBATTR-IEQUI'
                              'X'.
perform bdc_field       using 'ITOBATTR-EINZL'
                         'X'.
CALL TRANSACTION 'IL02' USING BDCDATA MODE 'A' MESSAGES INTO IT_MESS.
       Start new screen                                              *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR BDCDATA.
BDCDATA-PROGRAM = PROGRAM.
BDCDATA-DYNPRO   = DYNPRO.
BDCDATA-DYNBEGIN = 'X'.
APPEND BDCDATA.
ENDFORM.                    "BDC_DYNPRO
       Insert field                                                  *
FORM BDC_FIELD USING FNAM FVAL.
IF FVAL <> SPACE.
    CLEAR BDCDATA.
    BDCDATA-FNAM = FNAM.
    BDCDATA-FVAL = FVAL.
    APPEND BDCDATA.
ENDIF.
ENDFORM.                    "BDC_FIELD

Hi Michelle,
No I havent tried this way. How to do that can you tell me ?
Regards
Anu

EXIT BADI FOR ME21N ME22N AND ME23N

Hello Boys.
I want to change the field 'Tax code' (MWSKZ) in a Purchase order on transaction ME21N, ME22N AND ME23N.
I want to change thios field in a BADI, USER EXIT or ENHANCEMENT-POINT.
But I can't find where change this field.
thanks for your help.
Best regards.

Try Badi : ME_PROCESS_PO_CUST
    CALL METHOD im_item->get_data
      RECEIVING
        re_data = v_data_item.
Your code to change the tax code
CALL METHOD im_item->set_data( v_data_item ).
<REMOVED BY MODERATOR>
Edited by: Aparna Shekhar on Jun 12, 2008 11:33 AM
Edited by: Alvaro Tejada Galindo on Jun 12, 2008 12:52 PM

Call transaction doubt?

hi experts,
I want to call a transaction and to invoke a function code in the called transaction without any user interaction. Is it possible to use <b>call transaction "Tcode" </b>statement and pass a fuction code along with it. else suggest me how to over come this problem.
with regards,
James....
valuable answers will be rewarded..........

this is one more addtion of the CALL TRANSACTION statement
... <b>USING bdc_tab [bdc_options]</b>
Effect
Use this addition to pass an internal table bdc_tab of row type BDCDATA from the ABAP Dictionary to a dialog transaction. The additions bdc_options control the batch input processing. When a transaction with addition USING is called, the system field sy-binpt is set to value "X" in the called program - while this transaction is running, no other transaction can be called with this addition.
The internal table bdc_tab is the program-internal representation of a batch input session and must be filled accordingly. The structure BDCDATA has the components shown in the table below.
Component Description
PROGRAM Name of the program of the called transaction
DYNPRO Number of the dynpro to be processed
DYNBEGIN Flag for the beginning of a new dynpro (possible values are "X" and " ")
FNAM Name of a dynpro field to be filled or batch input control statement, for example, to position the cursor
FVAL Value to be passed to the dynpro field or to the control statement
Using the internal table bdc_tab, you can provide any number of screens of the called transaction with input and user actions.
System Fields
sy-subrc Description
0 The batch input processing of the called transaction was successful.
< 1000 Error in the called transaction. If within the transaction a message was sent, you can receive it using the addition MESSAGES.
1001 Error in batch input processing.
Note
Outside of ABAP Objects you can specify the additions AND SKIP FIRST SCREEN and USING together. However, this does not make sense, because the addition AND SKIP FIRST SCREEN is desigend only to fill the mandatory input fields using SPA/GPA parameters, while the batch input table specified with USING controls the entire transaction flow including the display of the screens.
Example
Call of the Class Builder (transaction SE24) and display of class CL_SPFLI_PERSISTENT. The internal table bdcdata_tab contains the input for the batch input processing of the first dynpro (1000) of the transaction. Using structure opt, the batch input processing is set to suppress the first screen and to display the next screen in the standard size.
DATA class_name(30) TYPE c VALUE 'CL_SPFLI_PERSISTENT'.
DATA: bdcdata_wa TYPE bdcdata,
bdcdata_tab TYPE TABLE OF bdcdata.
DATA opt TYPE ctu_params.
CLEAR bdcdata_wa.
bdcdata_wa-program = 'SAPLSEOD'.
bdcdata_wa-dynpro = '1000'.
bdcdata_wa-dynbegin = 'X'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'BDC_CURSOR'.
bdcdata_wa-fval = 'SEOCLASS-CLSNAME'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'SEOCLASS-CLSNAME'.
bdcdata_wa-fval = class_name.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'BDC_OKCODE'.
bdcdata_wa-fval = '=CIDI'.
APPEND bdcdata_wa TO bdcdata_tab.
opt-dismode = 'E'.
opt-defsize = 'X'.
CALL TRANSACTION 'SE24' USING bdcdata_tab OPTIONS FROM opt.

No locks realease with CALL TRANSACTION

Hi all,
I have a problem. I have a call transaction statement inside of a Loop. The problem is that it brings in the messtab a message that says that the product that I'm trying to modify is locked after each loop pass. I've tried to correc it using COMMIT WORK AND WAIT, WAIT UP TO 5 seconds, DEQUEUE ALL and modifying the update technique of the call transaction to S and L....but nothing helps.
In addition, I have the same problem but instead of using a call transaction statement I used a BAPI ( BAPI_PRDSRVAPS_SAVEMULTI2)
I use the BAPI in this way.
CALL FUNCTION 'BAPI_PRDSRVAPS_SAVEMULTI2'
EXPORTING
    logical_system                    = wl_logsis
SAVE_OPTIONS                      =
   COMMIT_CONTROL                     = ''
BUSINESS_SYSTEM_GROUP             =
TABLES
   PRODUCT_LOCATION_VERSION          = t_location_ver
   PRODUCT_LOCATION_VERSION_X        = t_location_verx
   RETURN                            = t_return1.
Please some ideas...
Thanks.

Hi guys,
I've been trying in the way you said but I've not be able to solve the problem. This is part of the code I wrote before calling BAPI in order to get success.
wl_tabix = 1.
WHILE wl_tabix ne 1.
    CALL FUNCTION 'ENQUEUE_/SAPAPO/E_MATKEY'
      EXPORTING
        MODE_/SAPAPO/MATKEY_LOCK       = 'E'
        MANDT                          = SY-MANDT
        MATNR                          = gt_outtab-matnr
     EXCEPTIONS
       FOREIGN_LOCK                   = 1
       SYSTEM_FAILURE                 = 2
       OTHERS                         = 3.
     MOVE sy-subrc TO wl_tabix.
     IF wl_tabix ne 1.
       CALL FUNCTION 'DEQUEUE_/SAPAPO/E_MATKEY'
        EXPORTING
           MODE_/SAPAPO/MATKEY_LOCK       = 'E'
           MANDT                          = SY-MANDT
           MATNR                          = gt_outtab-matnr.
     ENDIF.
ENDWHILE.
Please, some ideas for this because I'm still stuck on it.
Thanks.

Call transaction for less than 10,000 records

Hi all
Is call transaction advisable for processing less than 10,000 records.
I want to use call transaction for each record and if it fails, pass it to an opened bdc session for manual processing by functional consultants. At the same time, I have to write a report with successful and errored records. Is my approach the only way? Any other ideas are welcome and appreciated
Thanks
ricky

Its completely safe.
Check the return table for all message type E and then recreate your Error table and pass it to BDC open session and can be executed from SM35 in foreground mode. But what happen if there are more say 100 or 200 error records are there.Its not feasible to go and run each record in Foreground mode.Instead Display the error records in an editable ALV with the error message trap from the CALL Transaction return table and let the consultant correct then on the screen and download it, modify it to suit the upload procedure of your report. Then reprocess the file.
Also, display the audit report based on that table.
Regards,
Amit

CALL TRANSACTION 'ME23N' AND SKIP FIRST SCREEN.

Hi,
i'm using this in an report.
SET PARAMETER ID 'BES' FIELD WA_ITAB-EBELN.
SET PARAMETER ID 'BSP' FIELD WA_ITAB-EBELP.
CALL TRANSACTION 'ME23N' AND SKIP FIRST SCREEN.
It works OK.
Is there any parameter ID to go in a sprecial part of an PO, for example
direct to materialdata or konditions?.
thanks.
Regards, Dieter

Hi,
I think u can do that by using BDC as used in this code please refer to this code.
FORM get_user_command USING cr_ucomm     LIKE sy-ucomm      "#EC *
                            cr_selfield TYPE slis_selfield.
CLEAR wa_final.
DATA BEGIN OF bdcdata OCCURS 10.
          INCLUDE STRUCTURE bdcdata.
DATA END OF bdcdata.
CASE cr_ucomm.
    WHEN '&IC1'.
      READ TABLE it_final INTO wa_final
               INDEX cr_selfield-tabindex.
      IF cr_selfield-fieldname = 'MATNR'.
        IF sy-subrc IS INITIAL.
          SET PARAMETER ID 'MXX' FIELD 'E'.
          SET PARAMETER ID 'MAT' FIELD wa_final-matnr.
          SET PARAMETER ID 'WRK' FIELD wa_final-werks.
          CALL TRANSACTION 'MM03' AND SKIP FIRST SCREEN.
        ENDIF.
      ELSEIF cr_selfield-fieldname = 'LIFNR'.
        IF sy-subrc IS INITIAL.
          CLEAR bdcdata.
          bdcdata-program = 'SAPMF02K'.
          bdcdata-dynpro   = '0101'.
          bdcdata-dynbegin = 'X'.
          APPEND bdcdata.
          CLEAR bdcdata.
          bdcdata-fnam     = 'RF02K-LIFNR'.
          bdcdata-fval     = wa_final-lifnr.
          APPEND bdcdata.
          CLEAR bdcdata.
          bdcdata-fnam     = 'RF02K-EKORG '.
          bdcdata-fval     = wa_final-ekorg.
          APPEND bdcdata.
          CLEAR bdcdata.
          bdcdata-fnam     = 'RF02K-D0310'.
          bdcdata-fval     = 'X'.
          APPEND bdcdata.
          CLEAR bdcdata.
          bdcdata-fnam     = 'WRF02K-D0320'.
          bdcdata-fval     = 'X'.
          APPEND bdcdata.
          CLEAR bdcdata.
          bdcdata-fnam     = 'BDC_OKCODE'.
          bdcdata-fval     = '/00'.
          APPEND bdcdata.
          CLEAR bdcdata.
          bdcdata-program = 'SAPMF02K'.
          bdcdata-dynpro   = '0110'.
          bdcdata-dynbegin = 'X'.
          APPEND bdcdata.
          CALL TRANSACTION 'XK03' USING bdcdata MODE 'E'.
        ENDIF.
      ENDIF.
ENDCASE.
ENDFORM. " get_user_command
regards,
sudha

Call transaction ME23N

Hi There!
I'm doing a call transaction of ME23n and it's working fine, the problem is, and after googling it lots, I couldn't fine the answer, that the Help panel appears always and the user does not want that!.
It there any thick that I'm missing to call the transaction without displaying the Help?
Thanks in advance.

Thanks Chen! This is what I was after.
For better details on the problem My first screen looks like this.
PERFORM bdc_dynpro TABLES lt_bdcdata USING 'SAPLMEGUI' '0014'.
PERFORM bdc_field TABLES lt_bdcdata USING 'BDC_OKCODE' '=MECHOB'.
PERFORM bdc_field TABLES lt_bdcdata USING 'BDC_OKCODE' '=MEHELP'.
Thanks again!

Session method and call transaction methos which one is the sap recomonded

hi
PLease give me the answer to these questions.
session method and call transaction methos which one is the sap recomonded why .
2) if we want to maintain BDC program in all the systems.wt to d0

Hi Revethi,
Here is the difference between the Session and Call Transaction method.
Session
Session method supports both small amount of data aswell as large amount of data
2) data processing is asynchronus and data updation is synchronus.
3) it process multiple apllication while perfomaning validations.
4) in session method data will be updated in data base only after processing session only.
5) system provide by default logfile for handling error records.
6) it supports both foreground aswell as background process
in bdc we use FM ... bdc_open_group " for creating Session
bdc_insert " adding transaction and bdcdata table for updating database
bdc_close_group " for closing Session
Call Transaction
Call transaction exclusively for small amout of data
2) it supports only one apllication while perfoming validations
3) there is no default logfile, We can explicitly provide logic for creating logfile for handling error records.
we can create logfile by using structure....BDCMSGCOLL
4) it doesn't support background processing.
5) data processing is synchronous and Data updation is Synchronous( default), in
this method also supports daya updation in asynchronus process also.
Syntax:
Call transaction <transaction-name> using BDCDATA
mode <A/N/E> update <L/A/S>
messages into BDCMSGCOLL.

Get and Set Parameter ID in BDC Call transaction

Hi all
I have written this BDC program to run a transaction eg33 to install meter. After meter get installled System generates Device location number. I need to use this device location number in calling another transaction il03. but my data fetching using get and set parameter id is not giving accurate result. Kindly check my code and suggest where should I improve. Or whatelse can I do to fullfill this type of requirement other than GET and SET PARAMETER ID.
REPORT ZAC_EG33 NO STANDARD PAGE HEADING
                 LINE-SIZE 100.
TABLES: EABL,
        BUT000,
        ZISUH0003.
DATA :
      XYZ LIKE IFLO-TPLNR.
DATA: IT_STATUS TYPE ZISUH0003.
DATA: G_INDEX TYPE I,
      G_START_COL TYPE I VALUE '1',      "start column
      G_START_ROW TYPE I VALUE '14',      "start row
      G_END_COL   TYPE I VALUE '18',     "maximum column
      G_END_ROW   TYPE I VALUE '75', "maximum row
      G_TEXT(20),                         "stores error messages
      G_PAGES        TYPE I,
      G_CURRENT_PAGE TYPE I,
      G_COUNT LIKE SY-DBCNT.
data: l_file   type file_table,
      file1    type string,
      l_title type string,
      LENGTH   TYPE I,
      FILES    type filetable,
      SUBRC    type i,
      STR_FILE type STRING,
      D_FILE   type RLGRAP-FILENAME,
      filename TYPE String,
      L_itab_date(10).
FIELD-SYMBOLS : <FS>.
DATA: IT_EXCEL LIKE STANDARD TABLE OF ALSMEX_TABLINE WITH HEADER LINE,
      IT_MESS TYPE STANDARD TABLE OF BDCMSGCOLL WITH HEADER LINE.
TYPES: BEGIN OF TY_OPEN,
        HAUS LIKE REG30-HAUS,
        EADAT(10),
        GERAETNEU LIKE REG30-GERAETNEU,
        MESSDRCK LIKE REG30-MESSDRCK,
        ZWSTANDCE LIKE REG30-ZWSTANDCE,
        END OF TY_OPEN.
DATA : T_ANLAGE LIKE EANLD-ANLAGE,
       VSTELLE LIKE EVBS-VSTELLE,
       S_ANLAGE LIKE EANLD-ANLAGE,
       temp_c(7).
DATA: IT_OPEN TYPE STANDARD TABLE OF TY_OPEN WITH HEADER LINE.
DATA: BDCDATA TYPE STANDARD TABLE OF BDCDATA WITH HEADER LINE.
SELECTION-SCREEN BEGIN OF BLOCK 1 WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN SKIP 2.
PARAMETERS: P_FILE like RLGRAP-FILENAME OBLIGATORY.
SELECTION-SCREEN SKIP 2.
SELECTION-SCREEN END OF BLOCK 1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE .
PERFORM GET_FILE_NAME.
MOVE FILENAME TO P_FILE.
START-OF-SELECTION.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
    FILENAME                      = p_file
    I_BEGIN_COL                   = 1 "VF_START_COL
    I_BEGIN_ROW                   = 2 "VF_START_ROW
    I_END_COL                     = 5 "VF_END_COL
    I_END_ROW                     = 10000 "VF_END_ROW
TABLES
    INTERN                        = IT_EXCEL
EXCEPTIONS
    INCONSISTENT_PARAMETERS       = 1
    UPLOAD_OLE                    = 2
    OTHERS                        = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF IT_EXCEL[] IS INITIAL.
G_TEXT = 'No Data Uploaded'.
ELSE.
SORT IT_EXCEL BY ROW COL.
LOOP AT IT_EXCEL.
    MOVE : IT_EXCEL-COL TO G_INDEX.
    ASSIGN COMPONENT G_INDEX OF STRUCTURE IT_OPEN TO <FS>.
    MOVE IT_EXCEL-VALUE TO <FS>.
    AT END OF ROW.
      IF NOT IT_OPEN IS INITIAL.
      APPEND IT_OPEN." TO IT_LINE.
      CLEAR IT_OPEN.
      CLEAR IT_EXCEL.
      ENDIF.
    ENDAT.
ENDLOOP.
ENDIF.
REFRESH IT_EXCEL.
ULINE.
FORMAT COLOR 3 ON.
WRITE: /1 sy-vline ,
       2 'Material No.' ,
       25 sy-vline,
        2 'Logs' ,
        100 sy-vline.
uline.
FORMAT COLOR OFF.
PERFORM BDC_OPEN_READING.
MESSAGE S013(ZPS).
*&      Form GET_FILE_NAME
      text
--> p1        text
<-- p2        text
FORM GET_FILE_NAME .
REFRESH FILES.
call method cl_gui_frontend_services=>file_open_dialog
            exporting
              window_title            = l_title
            changing
              file_table              = files
              rc                      = subrc
            exceptions
              file_open_dialog_failed = 1
              cntl_error              = 2
              error_no_gui            = 3
              others                  = 4.
          check sy-subrc = 0.
          loop at files into l_file.
            str_file = l_file.
            move str_file to filename.
            exit.
          endloop.
ENDFORM.                    " GET_FILE_NAME
*&      Form BDC_OPEN_READING
      text
--> p1        text
<-- p2        text
FORM BDC_OPEN_READING .
LOOP AT IT_OPEN.
REFRESH BDCDATA.
clear : temp_c.
move it_open-MESSDRCK to temp_c.
condense : temp_c.
PERFORM MAP1.
CALL TRANSACTION 'EG33' USING BDCDATA MODE 'A' MESSAGES INTO IT_MESS.
+***changes by added on 28/02/08 +
get parameter id 'IFL' FIELD XYZ.
PERFORM MAP2.
set parameter id 'IFL' FIELD XYZ.
++*
CALL TRANSACTION 'IL03' USING BDCDATA MODE 'A' MESSAGES INTO IT_MESS.
+****end change added on 28.02.08+DATA: G_INSNO LIKE IT_OPEN-HAUS.
IF NOT IT_MESS[] IS INITIAL.
G_INSNO = IT_OPEN-HAUS.
PERFORM GET_MESSAGES TABLES IT_MESS USING G_INSNO." IT_LINE.
ENDIF.
READ TABLE IT_MESS WITH KEY MSGTYP = 'E'.
IF SY-SUBRC NE 0.
READ TABLE IT_MESS WITH KEY MSGTYP = 'S' MSGNR = '622'.
IF SY-SUBRC EQ 0.
SELECT SINGLE VSTELLE FROM EVBS INTO VSTELLE WHERE HAUS = IT_OPEN-HAUS.
SELECT SINGLE ANLAGE FROM EANL INTO T_ANLAGE WHERE VSTELLE = VSTELLE.
MOVE T_ANLAGE TO IT_STATUS-ANLAGE.
MOVE 'X' TO IT_STATUS-RFC.
*perform get_date_format using IT_OPEN-EADAT.
MOVE IT_OPEN-EADAT TO IT_STATUS-ADATE.
SELECT SINGLE ANLAGE FROM ZISUH0003 INTO S_ANLAGE WHERE ANLAGE =
T_ANLAGE.
IF SY-SUBRC EQ 4.
    INSERT ZISUH0003 FROM IT_STATUS.
ELSE.
    UPDATE ZISUH0003 FROM IT_STATUS.
ENDIF.
ENDIF.
ENDIF.
REFRESH IT_MESS.
CLEAR   IT_MESS.
ENDLOOP.
ENDFORM.                    " BDC_OPEN_READING
       Start new screen                                              *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR BDCDATA.
BDCDATA-PROGRAM = PROGRAM.
BDCDATA-DYNPRO   = DYNPRO.
BDCDATA-DYNBEGIN = 'X'.
APPEND BDCDATA.
ENDFORM.
       Insert field                                                  *
FORM BDC_FIELD USING FNAM FVAL.
IF FVAL <> SPACE.
    CLEAR BDCDATA.
    BDCDATA-FNAM = FNAM.
    BDCDATA-FVAL = FVAL.
    APPEND BDCDATA.
ENDIF.
ENDFORM.
*&      Form MAP1
      text
--> p1        text
<-- p2        text
FORM MAP1 .
perform bdc_dynpro      using 'SAPLE30D' '0100'.
perform bdc_field       using 'BDC_CURSOR'
                              'REG30-GERAETNEU'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'REG30-HAUS'
                              IT_OPEN-HAUS. "'100000000033'.
perform bdc_field       using 'REG30-EADAT'
                              IT_OPEN-EADAT. "'18.02.2006'.
perform bdc_field       using 'REG30-GERAETNEU'
                              IT_OPEN-GERAETNEU. "'66a'.
perform bdc_dynpro      using 'SAPLE30D' '0220'.
perform bdc_field       using 'BDC_CURSOR'
                              'REG30-TEMP_AREA(02)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=SAVE'.
perform bdc_field       using 'REG30-MESSDRCK'
                               temp_c. "IT_OPEN-MESSDRCK'0.0125'.
perform bdc_field       using 'REG30-GERWECHS'
                              '05'.
perform bdc_field       using 'REG30-ANZDAYSOFPERIOD(01)'
                              '30'.
perform bdc_field       using 'REG30-ZWSTANDCE(01)'
                              IT_OPEN-ZWSTANDCE. "'10'.
perform bdc_field       using 'REG30-ZWSTANDCE(02)'
                              '0'.
perform bdc_field       using 'REG30-PERVERBR(01)'
                              '0'.
perform bdc_field       using 'REG30-PERVERBR(02)'
                              '0'.
perform bdc_field       using 'REG30-TEMP_AREA(01)'
                              '0001'.
perform bdc_field       using 'REG30-TEMP_AREA(02)'
                              '0001'.
perform bdc_field       using 'REG30-PR_AREA_AI(01)'
                              '0001'.
perform bdc_field       using 'REG30-PR_AREA_AI(02)'
                              '0001'.
ENDFORM.                    " MAP1
****CHANGEs added BY ALKA 28.02.08
*&      Form MAP2
      text
--> p1        text
<-- p2        text
FORM MAP2 .
perform bdc_dynpro      using 'SAPMILO0' '1110'.
perform bdc_field       using 'BDC_CURSOR'
                              'IFLO-TPLNR'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'IFLO-TPLNR'
                              XYZ..
perform bdc_field       using 'RILO0-TPLKZ'
                              'AO_GP'.
perform bdc_dynpro      using 'SAPMILO0' '2100'.
perform bdc_field       using 'BDC_CURSOR'
                              'IFLO-PLTXT'.
perform bdc_field       using 'BDC_OKCODE'
                              '=T\04'.
perform bdc_field       using 'IFLO-PLTXT'
                              'DEVICE LOCATION'.
perform bdc_dynpro      using 'SAPMILO0' '2100'.
perform bdc_field       using 'BDC_OKCODE'
                              '=BU'.
perform bdc_field       using 'IFLO-PLTXT'
                              'DEVICE LOCATION'.
perform bdc_field       using 'BDC_CURSOR'
                              'ITOBATTR-EINZL'.
perform bdc_field       using 'ITOBATTR-IEQUI'
                              'X'.
perform bdc_field       using 'ITOBATTR-EINZL'
                              'X'.
ENDFORM.                    " MAP2
*****END CHANGE added on 28.02.08
*&      Form get_date_format
      text
     -->P_IT_ORDER_TABLE_C_DATE text
FORM get_date_format USING L_ITAB_DATE." LIKE SY-DATUM.
data: d_temp(4),
      m_temp(2),
      y_temp(4).
*move L_ITAB_DATE to L_ITAB_DATE.
y_temp = L_ITAB_DATE(4).
m_temp = L_ITAB_DATE+4(2).
d_temp = L_ITAB_DATE+6(2).
CONCATENATE d_temp '.' m_temp '.' y_temp into L_ITAB_DATE.
ENDFORM.                    " get_date_format
*&      Form GET_MESSAGES
      text
     -->P_IT_MESS text
     -->P_G_INSNO text
FORM GET_MESSAGES TABLES IT_MESS STRUCTURE BDCMSGCOLL USING G_INSNO .TABLES T100.
DATA: L_MSTRING(255).
LOOP AT IT_MESS WHERE MSGTYP = 'E'   OR MSGTYP = 'S'.
      SELECT SINGLE * FROM T100 WHERE SPRSL = IT_MESS-MSGSPRA
                                AND   ARBGB = IT_MESS-MSGID
                                AND   MSGNR = IT_MESS-MSGNR.
      IF SY-SUBRC = 0.
        L_MSTRING = T100-TEXT.
        IF L_MSTRING CS '&1'.
          REPLACE '&1' WITH IT_MESS-MSGV1 INTO L_MSTRING.
          REPLACE '&2' WITH IT_MESS-MSGV2 INTO L_MSTRING.
          REPLACE '&3' WITH IT_MESS-MSGV3 INTO L_MSTRING.
          REPLACE '&4' WITH IT_MESS-MSGV4 INTO L_MSTRING.
        ELSE.
          REPLACE '&' WITH IT_MESS-MSGV1 INTO L_MSTRING.
          REPLACE '&' WITH IT_MESS-MSGV2 INTO L_MSTRING.
          REPLACE '&' WITH IT_MESS-MSGV3 INTO L_MSTRING.
          REPLACE '&' WITH IT_MESS-MSGV4 INTO L_MSTRING.
        ENDIF.
        CONDENSE L_MSTRING.
      ENDIF.
      CONDENSE G_INSNO.
      CONCATENATE 'For' ' ' G_INSNO ',' L_MSTRING INTO L_MSTRING SEPARATED BY SPACE.
FORMAT COLOR 2 ON.
*IF IT_MESS-MSGTYP = 'S' AND IT_MESS-MSGNR = '622'.
*WRITE: 1 sy-vline,
        L_MSTRING    under 'Error Messages',
       100 sy-vline.
*ULINE.
*ELSEIF IT_MESS-MSGTYP = 'E'.
WRITE: 1 sy-vline,
         L_MSTRING    under 'Logs',
        100 sy-vline.
ULINE.
*ENDIF.
ENDLOOP.
ENDFORM.                    " GET_MESSAGES

i think there might be some time gap between CALL TRANSACTION and GET PARAMETER ID.....,that is to say,the new No. has not been generated and what you fetch is an old No..
i think you should use the "CALL TRANSACTION" like the following one:
CALL TRANSACTION 'EG33' USING BDCDATA MODE 'A' UPDATE 'L' MESSAGES INTO IT_MESS .
then i think you can get the right value.
P.S: the different update model(from SAP document)
       upd Effect
"A"   Asynchronous update. Updates of called programs are executed in the same way as if in the             COMMIT WORK statement the AND WAIT addition was not specified.
"S" Synchronous processing. Updates of the called programs are executed in the same way as if in the COMMIT WORK statement the AND WAIT addition had been specified.
"L" Local update. Updates of the called program are executed in such a way as if the SET UPDATE TASK LOCAL statement had been executed in it.
Other As for "A".

How to create bdc for fbs1 using both call transaction and session

Hi Friends,
i have one problem with tcode FBS1, i need to create a bdc program for both call transaction and session method using subroutine.
first call transaction needs to execute if there is an error sesion has to execute. if u have code please forward.
thanks in advance.
chandramouli pothugunta

where as in call transaction we can do error handling explictly.those errors are stored in one file .this file will send to the error log(session method),i.e session log.
in the above case we use both call transaction n session method at time in one program.sample code is below ,go through it .
data : begin of itxk01 occurs 0,
end of itxk01.
data : bdcdata like itbdcdata occurs 0 with header line.
data : itbdcmsgcoll like itbdcmsgcoll occurs 0 with header line,
itxk01 like itxk01-dup occurs 0 with header line.
call gui-upload.
loop at itxk01.
refresh itxk01.
perform bdc-dynpr0 using 'prg' 'scr'
perform bdc-dynfld using fnam fval
call transaction 'xk01' using bdcdata mode 'a' update 's' messages into itbdcmsgcoll.
if sy-subrc ne 0.
append itxk01 into itxk01-dup.
endif.
endloop.
if not itxk01-dup[] is initial.
refresh itck01.
call bdc_open_group
itxk01 = itxk01-dup.
loop at itxk01.
refresh itxk01.
perform bdc-dynpr0 using 'prg' 'scr'
perform bdc-dynfld using fnam fval
call bdc-insert.
endloop.
call bdc-close-group.
form bdc-dynpr0 using pr sc
endform .
form bdc-field using fnam faval
endform.
this will help u.
reward points for me
kiran

Problem with ALV_GRID and CALL TRANSACTION.

Hi all, Could you please tell me
At SE38
Why REUSE_ALV_GRID_DISPLAY and CALL TRANSACTION after called then I click the back button to return to the calling program but it automatic return to the source code? (it hasn't saves the data in alv grid )
In another case of this program, after automatic return to the source code then I have to waiting for 5-10 mins for execute again cuz if immediately execute the program don't fill any data to the alv grid.
I have problem with a simple source code like this
REPORT ZFS_ALV_DEMO.
TYPE-POOLS: slis.
DATA: itab LIKE STANDARD TABLE OF aufk WITH HEADER LINE.
DATA: gs_selfield TYPE slis_selfield   "Information cursor position ALV
    , w_aufnr     LIKE aufk-aufnr.     "Order Number
SELECT * FROM aufk INTO TABLE itab WHERE autyp = 40.     "//Process Order
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
     EXPORTING
          i_structure_name        = 'aufk'
          i_callback_program      = sy-cprog
          i_callback_user_command = 'USER_COMMAND_COR3'
     TABLES
          t_outtab         = itab
     EXCEPTIONS
          program_error    = 1
          OTHERS           = 2.
FORM user_command_cor3 USING u_ucomm     LIKE sy-ucomm
                             us_selfield TYPE slis_selfield."#EC CALLED
CASE u_ucomm.
    WHEN '&IC1'.
      gs_selfield = us_selfield.
      IF gs_selfield-fieldname = 'AUFNR'.
        SET PARAMETER ID 'ANR' FIELD gs_selfield-value.
        CALL TRANSACTION 'COR3' AND SKIP FIRST SCREEN.
      ELSE.
        MESSAGE w208(00) WITH 'Select by Order only!'.
      ENDIF.
ENDCASE.
ENDFORM.

Hi all, Could you please tell me
At SE38
Why REUSE_ALV_GRID_DISPLAY and CALL TRANSACTION after called then I click the back button to return to the calling program but it automatic return to the source code? (it hasn't saves the data in alv grid )
In another case of this program, after automatic return to the source code then I have to waiting for 5-10 mins for execute again cuz if immediately execute the program don't fill any data to the alv grid.
I have problem with a simple source code like this
REPORT ZFS_ALV_DEMO.
TYPE-POOLS: slis.
DATA: itab LIKE STANDARD TABLE OF aufk WITH HEADER LINE.
DATA: gs_selfield TYPE slis_selfield   "Information cursor position ALV
    , w_aufnr     LIKE aufk-aufnr.     "Order Number
SELECT * FROM aufk INTO TABLE itab WHERE autyp = 40.     "//Process Order
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
     EXPORTING
          i_structure_name        = 'aufk'
          i_callback_program      = sy-cprog
          i_callback_user_command = 'USER_COMMAND_COR3'
     TABLES
          t_outtab         = itab
     EXCEPTIONS
          program_error    = 1
          OTHERS           = 2.
FORM user_command_cor3 USING u_ucomm     LIKE sy-ucomm
                             us_selfield TYPE slis_selfield."#EC CALLED
CASE u_ucomm.
    WHEN '&IC1'.
      gs_selfield = us_selfield.
      IF gs_selfield-fieldname = 'AUFNR'.
        SET PARAMETER ID 'ANR' FIELD gs_selfield-value.
        CALL TRANSACTION 'COR3' AND SKIP FIRST SCREEN.
      ELSE.
        MESSAGE w208(00) WITH 'Select by Order only!'.
      ENDIF.
ENDCASE.
ENDFORM.

Error while updating data using session and call transaction method

Hi all,
    i have to update data using MM01 transaction from flat file to database.i have used both session method and call transaction method to do that.in both the methods data has been transferred from internal tables to screens but while updating the data that is by clicking the ok-code at the end of the transaction iam getting a dialogue box stating
   SAP EXPRESS DOCUMENT "UPDATE WAS TERMINATED" RECEIVED FROM AUTHOR "SAP".
please tell whether the problem lies and solution for that.
                                   thanks and regards.

hi,
check your recording.check whether u saved your material no in recording or not.
once again record the transacton mm01.
       MATNR LIKE RMMG1-MATNR,
       MBRSH LIKE RMMG1-MBRSH,
       MTART LIKE RMMG1-MTART,
       MAKTX LIKE MAKT-MAKTX,
       MEINS LIKE MARA-MEINS,
       MATKL LIKE MARA-MATKL,
       BISMT LIKE MARA-BISMT,
       EXTWG LIKE MARA-EXTWG,
these are the fields which u have to take in internal table.
this is the record which i took in my flatfile.use filetype as asc and hasfieldseperator as 'X'.
SUDHU-6     R     ROH     MATSUDHU     "     001     7890     AA
i did the same.but i didn't get any error.

Call transaction and skip first screen

Hi,
I have a little but I think difficult problem
I have a selection screen and after that I call my dnypro. In this dynpro I can open a dynpro which looks like a popup where I have the possibility to call the same transaction with other input paramters.
the problem is when I make call transaction and want to go back I see the pop up dynpro which calls the transaction. so how can I close this popup dynpro by calling again transaction?

I think I can't eyplain it.
Following. I have:
call transaction trans: selection screen calls dynpro 100, in dynpro 100 button with dynpro 200 with starting parameters.
dynpro 200 calls again transaction trans with skip first screen.
now I have displayed again dynpro 100 with new values. When I now want to go back I can see dynpro 200 which called the transaction. So how can I achieve this that dynpro 200 isn't shown when I go back ?

Call Transaction and skip first screen on workflow task

Hello, I'm developing a workflow with a user decison step, where the user should fill some data in transaction FD02.
When the user presses the button in the workitem, the wf goes to a step where i should call transaction FD02.
I'm using SET PARAMETER ID: 'KUN' FIELD customer. to fill the customer field and CALL TRANSACTION 'FD02' AND SKIP FIRST SCREEN.
But when I press the button in the workitem nothing happens. I tested the same in a report and it works. Can anybody help me?
Thanks a lot.

Hi,
try below code
data: fcode type FCODE value 'ANTRAGAEN',
       customer type kunner,
       bukrs type bukrs.
SET PARAMETER ID 'KUN' FIELD customer. " to fill the customer field
SET PARAMETER ID 'BUK' FIELD companycoder. " to fill the company code
SET PARAMETER ID 'TTC' FIELD fcoder.       " to fill Function code for enter " it may be other than TTC please check.
CALL TRANSACTION 'FD02' AND SKIP FIRST SCREEN.

Calling transaction MB03, ME53N and ME23N in SRM (Suppliers Relationship M)

Similar Messages

Maybe you are looking for