Calling UNIX Command from another server using ODIOScommand utility

Hi,
My unix script 'runmanger' is on another server say 'St23456wer' under /u10/DV2/ofsaa/fic/xxx/bin. I want to call this 'runmanager' using ODIOSCommand. My ODI agent is installed on different server. I can ping 'St23456wer' server from ODI server. How can I call this unix script.

My only experience with this is connecting to source files on a remote linux server and the two options I was presented with were 1) creating a mount to make the files 'local', or 2) set up a new agent on the remote server.
One of the gurus may have a better answer for you.

Similar Messages

Call Unix Command From Reports Using Java

Hi,
Could somebody please show me a sample coding to call Unix command from 10g report using java?
In metalink doc id 361857.1 does not show much.
Thanks,
neemin

Hi,
I have a problem with synchronization of the java commands.
In the Before Parammeter Form trigger, I have:
function BeforePForm return boolean is
rt ORA_JAVA.JOBJECT;
proc ORA_JAVA.JOBJECT;
v_txt varchar2(32000);
i integer := 0;
v_cd_modulo int;
v_arqlog text_io.file_type;
cursor c_evento is
select codigo,
nome
from
(select e.cd_evento || e.cd_edicao codigo
,nm_evento nome
from grh_ev_evento e
where e.CD_GRUPO in (select cd_grupo
from grh_ev_adm
where cd_usuario = (select cd_usuario
from usuario
where login_usuario = :AUTHID)))
order by substr(nome, 11);
begin
-- Create the context for logged user
if instr(upper(nvl(:AUTHID,'RWCLIENT')),'RWCLIENT') > 0 then
:AUTHID := :SSO_USUARIO;
end if ;
TCEENV.SET_TCEENV(:AUTHID);
if PK_SCA.SCA_GET_USER_RIGHTS(:sca_module_name, :AUTHID) IS NULL then
srw.message(100, 'Access denided!');
return (FALSE);
end if;
-- Create file in Report Server (UNIX)
v_txt := ' ' || htf.formSelectOpen('P_EV_EDICAO', 'Evento: ');
:p_file := '/u03/SCAWEB/repout/' || :sca_module_name || '_' ||
pk_sca.sca_encrypt(:AUTHID || to_char(systimestamp, 'ss.ff'));
v_arqlog := text_io.fopen (:p_file, 'A');
text_io.put_line (v_arqlog, v_txt);
for reg in c_evento loop
i := i + 1;
if i = 1 then
v_txt := '<OPTION SELECTED VALUE="' || reg.codigo || '">' || reg.nome;
else
v_txt := '<OPTION VALUE="' || reg.codigo || '">' || reg.nome;
end if;
text_io.put_line (v_arqlog, v_txt);
end loop;
v_txt := '</SELECT></CENTER></form></BODY> </HTML>';
text_io.put_line (v_arqlog, v_txt);
text_io.fclose (v_arqlog);
SRW.SET_AFTER_FORM_HTML(SRW.FILE_ESCAPE, :p_file);
rt := RUNTIME.GetRuntime();
proc := RUNTIME.exec(rt,'rm ' || :p_file);
return (TRUE);
end;
The problem is that there isn't a "synchronize" command, and the
RUNTIME.exec(rt,'rm ' || :p_file) don't works (it does nothing) because
the SRW.SET_AFTER_FORM_HTML has a large delay and the following
command is ignored.
How can I solve it?
thanks,
lmprestes

Call unix commands from stored procedures

My stored procedure requires to call unix commands HOW DO I DO IT?
null

i do not know pl sql but in java you can use:
Runtime.getRuntime().exec("YOUR UNIX COMMAND");
real example:
Runtime.getRuntime().exec("ls");
but you must be careful with using that...
especially if you want to wait till the process finishes..
rgds,

Calling UNIX command from PL/SQL Procedure

Is there a way to call a UNIX command (exa. ls) from within a PL/SQL stored procedure? Looking through the various packages, I didn't see anything that would give me this ability.
I also looked through all the previous questions and nothing looked encouraging.
Thanks in advance,
Russ

Russ,
I thought I'd read a similar question awhile ago and did a search on the word host in this forum and found the following from July 9th that might help you:
http://technet.oracle.com:89/ubb/Forum88/HTML/001611.html
In that post I think the link listed by Barbara Boehmer in has changed to:
]http://asktom.oracle.com/pls/ask/f?p=4950:8:24579::NO::F4950_P8_DISPLAYID,F4950_P8_CRITERIA:16212348050,{host}
It looks like they give solutions for Oracle 7, 8 and 8i.
Good site Barbara, I've added it to my bookmarks.
Hope this helps.

Calling Unix command from the plsql

Hi ,
I am executing java code from the UNIX Shell script. Before executing this command i want to write plsql code to and pass the files to java command.
In the plsql code i want to select request id's using the cursor and find the .out files for each request id in the outfile path. once the file is found i want to copy that .out file to the current directory where the java command is going to execute.
Please suggest me how to use UNIX Command (in my case "cp") to copy the .out file from the outfile path to current directory after opening the cursor.

If I understand you correctly, you want to generate a log of request id's from the database and send this to the operating system whereby you will execute the following:

java org.apache.xalan.xslt.Process -XSL combinedfsg.xsl -OUT output.xml

If that is correct, then you should be able to perform all of this w/ PL/SQL by generating the log from the database and write it to the O/S w/ UTIL_FILE. If you want to execute the java code at this point, you should be able to utilize Tom's method with the following:

exec rc('java org.apache.xalan.xslt.Process -XSL combinedfsg.xsl -OUT output.xml');

Call a form from another form using call_form,open_form,new_form

I HAVE TWO FORMS 1)KOPT_MODULE WHICH IS CALLED FORM
2)KOPT_SUB_MODULE WHICH IS CALLING FORM
IN KOPT_SUB_MODULE I HAVE ONE TRIGGER
1)WHEN BUTTON PRESSED
DECLARE
List_id ParamList;
BEGIN
List_id:= GET_PARAMETER_LIST('input_params');
IF NOT ID_NULL(List_id) THEN
DESTROY_PARAMETER_LIST(list_id);
END IF;
List_id := Create_Parameter_List('input_params');
     ADD_PARAMETER(list_id, 'emp_query', TEXT_PARAMETER, :MOD_ID);
CALL_FORM('KOPT_MODULE', NO_HIDE, DO_REPLACE, NO_QUERY_ONLY, list_id);
END;
IN KOPT_MODULE I HAVE ONE TRIGGER
1)WHEN NEW FORM INSTANCE
if :parameter.cparam_cond is not null then
     BEGIN
          set_block_property('KOPT_MODULE',default_where,:parameter.cparam_cond);
          --:SYSTEM.MESSAGE_LEVEL:='25';
          execute_query;
     END;
     END IF;
BOTH THE FORMS ARE AT SAME LOCATION "D:\Documents and Settings\Administrator\My Documents\PROJECT WORK"
I DON'T WANT TO USE CALL_FORM('D:\Documents and Settings\Administrator\My Documents\PROJECT WORK');
BUT WHEN I USE ABOVE TRIGGER A MESSAGE FRM-40010: CANNOT FIND FORM KOPT_MODULE
PL TELL ME ELABORATELY WHAT TO DO IN KOPT_MODULE FORM WHICH IS CALLED FORM
AND IN KOPT_SUB_MODULE WHICH IS CALLING FORM.
SHALL I WRITE ANY OTHER TRIGGER OR CHANGE THE CODE?
PL HELP ME TO SOLVE PROBLEM

First of all, stop shouting. Writing everything in uppercase is regarded as shouting.
Second, you didn't mention any version number, so please tell us your forms-version.
Depending on your version, you have to set the environment variable FORMS45_PATH, FORMS60_PATH, FORMS90_PATH or FORMS_PATH either in the registry or in your env-file.

Call unix command in sqlplus script

Hello, I wanna to know how to call a unix command in the sqlplus script.
For exemple,
I've a sqlplus script to lauch a oracle report, after the report is generated, I wanne to replace the output file in an other directory.
So that, I have to call the unix command mv here in the sqlplus script
How can I do it?**
I completed my situation:
I don't have dbms_scheduler untility in my database.
Thanks a lot for your help
Edited by: user11930885 on 17 janv. 2010 14:53

Yes, at the begining, I'll tried the unix shell by calling SQL.
I've the problem of passing the parameters through.
It seems to me
we can use
Host in the SQLPLUS to run the unix command.
but I've written it in my sqlplus script, it doesn't work. so I wanna to find an exemple how to use HOST in sqlplus script?
I would have loved to give you an example..but its not unix on my laptop.
But what i can tell you is...u should be doing otherway round.
Not calling Unix commands from SQL but calling SQL's form unix.
You got shell scripts for that.
Write a shell script. Login to SQL execute your code.
exit from sql and then move your file with MV. That's it.
Do post how far you get after trying this.

Calling a Report from another Report.....URGENT

Hi,
I am calling a report from another report using hyperlink. I want that this new report should come in a new page.
Can any body help me where i can set this property, so that the new report will open in a new page.
Thanks in advance
Regards
Kamal

Try to call report from report by a button in the calling report:
1     In the Layout Model view, click in the tool palette. Note
2     Click and drag a rectangle.
3     Double-click the button object to display the Property Palette.
4     Under the Button Label node, set the Label Type property to either Text or Icon:
n     If the button label is text, set the Text property to the text you want to appear on the button.
n     If the button label is an icon, set the Icon Name property to the name of the file containing the icon (the file must reside in the directory specified by the UI_ICON environment variable).
5     Under the Button Behavior node, set the Type property to PL/SQL.
6     Double-click the PL/SQL Trigger property value field.
7     In the PL/SQL Editor, define the PL/SQL for the action trigger or format trigger when the button is clicked in the formatted report.
8     Set other properties as desired.
9     To activate the button, run the report, then display it in the Runtime Previewer.

Accept Mail from another server

We are testing a migration scenario and are running into a few issues. I have our new mail server setup with the same domain as our old. We will slowly be migrating from the old to the new, sort of like a split domain. The old server is running GroupWise 7, the new is Zimbra based.
What I am attempting to do is allow for users on Zimbra (using the same domain) to be able to send messages to users on Groupwise. So far I have been unable to find a setting in GWIA that allows me to say it is "ok" to accept email from this server. I believe that since both the Zimbra and GW servers are using the example.com domain GW is not allowing messages to go to mailboxes.
How do I setup Groupwise to allow messages from another server using the same domain?

I doubt that is it. Your GW system is set to receive messages for
@example.com and shouldn't care where they have come from. Your Zimbra
server should be set to forward to GW as a smarthost and have it forward
undeliverables to that host.
Usually, the Zimbra side is going to have problems, especially if it has all
of the addresses configured on it. It knows that it handles email for
example.com and will try to deliver it to itself, unless you do something
with undeliverables instead.
I think.......................
"dabrown ksu" <[email protected]> wrote in message
news:[email protected]..
>
> We are testing a migration scenario and are running into a few issues. I
> have our new mail server setup with the same domain as our old. We will
> slowly be migrating from the old to the new, sort of like a split
> domain. The old server is running GroupWise 7, the new is Zimbra based.
>
> What I am attempting to do is allow for users on Zimbra (using the same
> domain) to be able to send messages to users on Groupwise. So far I have
> been unable to find a setting in GWIA that allows me to say it is "ok"
> to accept email from this server. I believe that since both the Zimbra
> and GW servers are using the example.com domain GW is not allowing
> messages to go to mailboxes.
>
> How do I setup Groupwise to allow messages from another server using
> the same domain?
>
>
> --
> dabrown_ksu
> ------------------------------------------------------------------------
> dabrown_ksu's Profile: http://forums.novell.com/member.php?userid=90079
> View this thread: http://forums.novell.com/showthread.php?t=415905
>

How to move folders from one server to another serve using unix command

Hi All,
How to move the folders from one server to another server using unix command.
scp -r armops@sjarmprd01:/ARM/scripts [email protected]:/ARM/scripts/
but it is giving an error like not a regular file .. what it means .. please let me know if any one knows about it
Thanks
Sreedhar

not a regular file .. what it meansProbably you have some fifo (named pipe) files...
Said that this has nothing to do with database (you should post on some nix forum, for example http://forums.oracle.com/forums/forum.jspa?forumID=135), you may try rsync* command (man rsync).

Call an interactive UNIX command from java

Hi,
I want to call a UNIX command from java. When issue the command 'htpasswd -c filename username' on UNIX terminal, it asks for the new password and the then confirmation password again (yeah, unfortunately the htpasswd installed on our system does not allow you proivde the password on the command line. So have to work interactively ). Now, I have written a simple java program RunCommand.java. I am hardcoding the password for the htpasswd command in the file (in the real situation, password will be generated dynamically). I want to issue 'java RunCommand' on the UNIX command line and get back the command prompt without being asked for the password twice. The code is below, but the Outputstream does not work as expected. It always asks for inputs. Any idea? Many thanks.
import java.io.*;
public class RunCommand {
public static void main(String args[]) throws Exception {
String s = null;
try {
String cmd = "htpasswd -c filename username ";
// run a Unix command
Process p = Runtime.getRuntime().exec(cmd);
BufferedReader stdInput = new BufferedReader(new InputStreamReader(p.getInputStream()));
BufferedReader stdError = new BufferedReader(new InputStreamReader(p.getErrorStream()));
OutputStream stdOut = p.getOutputStream();
String pswd = "mypassword";
while ((s = stdInput.readLine()) != null) {
     s = stdInput.readLine();
     stdOut.write(pswd.getBytes());
     stdOut.flush();
System.out.println("Here is the standard error of the command (if any):\n");
while ((s = stdError.readLine()) != null) {
System.out.println(s);
stdOut.close();
stdInput.close();
stdError.close();
System.exit(0);
catch (IOException e) {
System.out.println("exceptions caught: ");
e.printStackTrace();
System.exit(-1);

There are only about 9 billion responses a day on how to do this. Use the search feature.

I am trying to publish a web site using my own domain. How do I transfer my host to mac from another server?

I am trying to publish a web site using my own domain. How do I transfer my host to mac from another server?

I've created a CNAME entry to redirect the domain to apple but the site is still not live! Can anyone help please?
Did you also do what is required in the .Mac account settings?
http://help.apple.com/mac2/1/help/member/pgs2/memfmsetgen367.html
Could you provide your urls?

Calling Operating System Commands from PL/SQL using java

Calling Operating System Commands from PL/SQL - The Java Way
wlth help of given thread link,
Calling OS Commands from Plsql
but i had user privilege problem
Declare
x Varchar2(2000);
Begin
x := OSCommand_Run('/tmp/sri/GROUP_ho.sh');
DBMS_OUTPUT.Put_Line(x);
End;
o/p;
can't exec: /tmp/sri/GROUP_ho.sh lacks user privilege
i done the grant privillage also
part
dbms_java.grant_permission('abcd', 'SYS:java.lang.RuntimePermission', 'writeFileDescriptor', '');
dbms_java.grant_permission('abcd', 'SYS:java.lang.RuntimePermission', 'readFileDescriptor', '');
dbms_java.grant_permission('
abcd', 'SYS:java.io.FilePermission','<<ALL FILES>>', 'execute');
again
get
can't exec: /tmp/sri/GROUP_ho.sh lacks user privilege
same error;

Process management at the OS level should prevent execution continuing in the calling code until the command has completed (either successfully or with error).
If the low level java code were to spawn child process threads then execution could continue, but I'm guessing the Java function your talking about doesn't do that and just calls the operating system to execute the command and waits for the returning code to come back.

ASAP:stored proc calling Unix commands

i want an Oracle stored procedure to call unix commands as well as do sqlldr ... opern.
requirement is :
the stored procedure needs to do :
for all files in a Directory:
do
{ .. use sqlldr to insert data in tbls
.. move the processed file into another directory
so,for ls &mv commands i need the Command/way out.
null

Hi Jorma,
It's been a while since I did it, but I successfully did what you
are trying to do. All I did was "load" the remote interface and
"stub" class into the database using the "loadjava" utility. My
environment was Oracle 8.1.7 on SUN (Sparc) Solaris 7.
Although I haven't tried it, you may be able to invoke a servlet
from your java stored procedure. The advantage over RMI is that
you don't need to generate and load a "stub" class. Naturally, you
would use the "java.net.URLConnection" class to invoke a servlet
on some web-server/servlet engine which you can communicate with
using "streams" -- java.io.InputStream and java.io.OutputStream
Also, I understand that there is now a "oc4jclient.jar" (not 100%
sure of the name) file that can be "loaded" into the database,
which allows you to contact EJB's in Oracle's OC4J product. I
think you can either do this directly, or indirectly using JMS
over Oracle AQ.
[JMS = Java Messaging Service]
[AQ = Advanced Queueing]
Good Luck,
Avi.

Running Unix Command from WEB-APPLICATION

Hi all,
I want to run unix command from a java-based web application. the basic code part is this ---
public class RunCommand
 public String runIt()
 String s = null, returnString = "";
 Process p=null;
 try
 Runtime rt = Runtime.getRuntime();
 p = rt.exec("sh testPOC.ksh");
 p.waitFor();
 BufferedReader stdInput = new BufferedReader(new
 InputStreamReader(p.getInputStream()));
 BufferedReader stdError = new BufferedReader(new
 InputStreamReader(p.getErrorStream()));
 // read the output from the command
 returnString += "Here is the standard output of the command: ";
 while ((s = stdInput.readLine()) != null) {
 returnString += s;
 // read any errors from the attempted command
 returnString += "Here is the standard error of the command (if any): ";
 while ((s = stdError.readLine()) != null) {
 returnString += s;
 catch (IOException e)
 returnString += "exception happened - here's what I know: ";
 returnString += "error-> " + e.getMessage();
 catch(Exception e)
 returnString += "exception happened - here's what I know: ";
 returnString += "error-> " + e.getMessage();
 return returnString;
}this class is kept as an inner class. The control comes to its outer class, from servlet, from which the runit() is called. but the exception is occuring at line of p=rt.exec(.....). it tells "<command name> : not found transaction completed" [got this using getMessage() method].
i am unable to show(and see, too) the stacktrace, because i don't have access to that test environment and its log. i can't run this in local because its windows one.
now can anyone tell me, where is the problem. is there any limitation in web application server/container? this was successful when i used command prompt writing a .java file. Please help me. Thanks in advance...

Friends, i've got, where the problem is.
when we run a class file directly from a command prompt, we get an environment with that shell window. but for a servlet application running these kind of commands from a class creates kind of child processes. each and every command is executed as a child process of jvm and don't get those environment. we have 'PATH' variable in the environment. when a command (say, 'dir' or 'sh' or 'ls', etc.) is executed, the shell first search for that executable file (i.e. dir / sh / ls) in the given paths in the variable 'PATH'. this is not available for the child commands of jvm. hence the basic commands are searched in the current directory of the jvm and they are failed.
i solved the problem giving full path of the commands. like :
p = rt.exec("/bin/sh runningScript.ksh")

Calling UNIX Command from another server using ODIOScommand utility

Similar Messages

Maybe you are looking for