Camcorder purchase recommendations?

Noob to iMovie...(sorry)
I'm trying to pick out a hard drive-based camcorder for amateur home movie use (new baby on the way). I figure hard-drive is easier to use with the iMac rather than converting from DVDs, etc.
I've noticed that some articles state that you have to connect your hard drive cam corder to the mac using firewire otherwise iMovie won't recognize it. Is that right? And I've heard problems with getting Sony cameras recognized. True?
Any advice is appreciated. Price range is $500-$1000.

Just throwing in my two cents based on past experience. I have a HP point and shoot digital camera that also takes video clips. While it's a nice function to have, you lose the sound when you import the video into iMovie for the reasons Sue mentions.
I just upgraded both my digital camera and digital camcorder, and did quite a bit of research before purchasing. The camcorders that record on DVD do not import into iMovie (at least based on the research I did). I only found one model of digital camcorder that burned directly to hard disc, so was reluctant to even try that format.
As for the digital camcorder, I own a Cannon, but wanted to upgrade to a better camera, so purchased the Panasonic GS 500. It is fabulous. It has optical stabilization and shoots well in low light. The color is excellent and it is by far the best camcorder I've owned to date.
I also purchased a Nikon D80 SLR digital camera and can't tell you how fabulous it is - I feel like I've died and gone to heaven. It shoots 3 frames per second which is fabulous for action shots.
If finances constrain you to one choice, which is probably the case with a new baby on the way, I'd recommend putting your dollars into an excellent digital camera that will last. Having three kiddos, I can tell you the video is great, but it's the pictures we look at more often. You can always borrow a camcorder from a good friend to make sure you have video of all stages, but you need that camera at hand immediately when s/he smiles for the first time . . .
Congratulations and good luck!
Raylene

Similar Messages

Recommendations for camcorder purchase for a publisher

I am a photo editor for a national publisher who is currently increasing it's internet presence. We would like to start filming our own video clips for use on our website. I am looking for recommendations of which camcorders would suit that purpose. I would like to be able to add an external microphone, instead of using the one on the camera. The price range would be somewhere in the $1500 range.
Thanks in advance for your recommendations.

HD is not needed. The clips will be played on our website, so people will be viewing them on their computers.
Let me know your recommendations when you have a chance.
Sincerely,
John Klein

Help with deciding camcorder purchase

Hello all,
I'm not sure if I'm posting this in a right forum. I'm seeking advice/input on camcorder brand that is mac compatible to purchase. We had JVC HD, which was absolutely crazy to convert onto quicktime, so we wold like to get mac compatible/user friendly camcorder in the price range up to $1,000. We'll be using camcorder to tape our babies and their milestones....thanks in advance.

"..can you explain the difference between Minidv tape vs. mini dvd?.."
Yes.
iMovie is a program which edits anything recorded on small video tape cassettes called "miniDV" cassettes. They look like this:
"MiniDVD" discs are small DVDs, which look like this:
iMovie CANNOT edit anything which is stored on mini (..or full-size..) DVDs, unless the material on the DVD is first passed through some other program to re-encode it into a different form.
That's because the video stored on a mini (..or full size..) DV tape is in 'DV' format, and consists of a series of separate video 'frames' ..a bit like the frames of a film, or the individual shots you take with an ordinary camera.
iMovie cannot edit the video stored on a (mini or full-size) DVD because it's stored in a different format called 'MPEG-2', and it consists of only occasional complete frames, plus descriptions of how the video differs, over the next second or two, from that individual 'key-frame'.
So most of the frames on a DVD are "virtual frames" ..they don't really exist, except as descriptions, such as "the eyes which were at such-and-such a position in Frame 1 have now to moved a bit to the right".
A DVD player takes these descriptions, and reconstitutes the actual frames from these descriptions, then shows them on your TV screen (..or in the miniDVD camcorder's viewfinder). It uses built in fast circuitry to do that.
iMovie cannot edit those "virtual frames", and other software, such as 'MPEG Streamclip' has to be used to rebuild them into real, editable frames. This can be a longwinded business, and is nowhere near as fast as the immediate replay of DVD frames in a proper DVD player.
There is also - despite what it looks like when you play a DVD of a Hollywood film - some loss of quality when video is recorded onto a DVD, and even this loss can't be restored when 'actual' frames are rebuilt from the 'virtual' frames. So the quality of camcorder videos shot in miniDVDs is seldom as good (..unless you shoot in 'high-definition'..) as the quality of video shot onto miniDV tapes. (..In order to fit video onto those tiny discs, the video is 'compressed', and this irretrievably loses a little of the original quality..)
So why do camcorder manufacturers make miniDVD camcorders?
(1) You can jump back to any part of the video without long-winded rewinding.
(2) You can easily post - in the mail - a miniDVD of a movie you've just shot.
(3) You can slip the miniDVD into most DVD players, and instantly have your movie on a TV.
(4) The DVD mechanism is simpler to make than a tape mechanism.
But what you CANNOT do - and the manufacturers don't mention this - is easily EDIT it ..although many miniDVD camcorders do come with a rather poor version of an editing program which runs on PCs.
..And yes: Canon, Sony, Panasonic miniDV tape camcorders are compatible with Macs and with iMovie. But they generally come without the necessary 'FireWire' or 'i.Link' or 'DVD' cable to connect the camcorder to a Mac (..they usually come with a USB cable, instead..) so you'll need to buy a "4-pin-to-6-pin" i.Link or FireWire or DV cable in order to connect the camcorder to the Mac.
Oh; and Canon camcorders generally don't work with a Mac when an external FireWire hard disc is also connected to the same Mac ..but ignore that: plug in the camera, and it'll work with a Mac.

Camcorder purchase

I plan to purchase the Sony HDR-PJ50V camcorder and video my lectures in HD. Most will be burned to DVD and maybe some will be sent out on Blueray disk.
The camera is listed as AVCHD. I have to use Sony with my remote tripod.
Could someone tell me what Sony means by; HD PS, HD FX, HD FH, HD HQ and STD HQ?
Which one should I use with FCE or FCP X?
David

Could someone tell me what Sony means by; HD PS, HD FX, HD FH, HD HQ and STD HQ?
These are different video quality/length of recording settings in the Sony camcorder. They are technically different data rates at which the video is recorded, but the main thing people look at is that each setting allows a different maximum recording time. The tradeoff is more recording time = lower quality video.
But you also need to keep in mind that the quality is pretty high to begin with. You would need to experiment with the different settings to determine whether or not you see any difference between them.
The user manual is your friend. Check pp 28 and 63-64 for details on the differences between these video modes.
There should be no difference in FCE vs FCPX for a particular mode that you set your camcorder for.

Heat (15 vs. 17), and purchasing recommendations

I think it's time to spend some money and get myself the MBP finally. I know there is heat dsicussions all over the board but I was wondering if the heat issues tend to be for the 15 or the 17 inch or pretty much the same for both. Also I was wondering if it was recommended to order over the internet or purchase it at an actual apple store. I don't really like having my computer bouncing around in the back of a truck, but I also would like the most recently made unit. Just wondering what recommendations people might have with store bought vs. internet.

Ok people give me some credit here. I know one way or another the computers get transported via trucks or airplanes or whatever, I realize that. However I thought there might be greater care taken of the products shipped to stores. Not a huge concern of mine, just wondering if anyone had any opinions one way or another.
As far as the heat, this won't keep me from buying one, I already know I want a 17 inch, I have seen both first hand. I've seen about 5 different 17 inch computers and only one of which was REALLY hot on the bottom when I checked it out.
So I guess it's somewhat a matter of luck when I order. Again just wondering if anyone had any opinions on store bought vs. internet ordered since I have always ordered online (I've only been a Dell user up until now).
Heat won't be the deciding factor in buying one or which one, that is stupid, just was curious if people knew which one it pertained to more since the 17 is bigger and there is more space for the heat to go, but on the other hand it is more powerful, so I was curious.
Also, I've read stuff on this temperature paste stuff, which I haven't really heard of before. If my computer is hot could an apple store take care of faulty paste or is this something I would want to re-apply myself? I am confident I could do it but if they can what the ****.

Camcorder purchase video file type

I am researching a camcorder for my school. One thing I have run into is that some camcorders only record in MP4 file type, which is not compatable with Windows Movie Maker (this is the software that all faculty have). Also, we are a Career and Technical Center - so we have a wide range of settings - outside and inside - good light and bad. Our price range is around $500.00. Can someone explain the different file types and which file type is the best and most versitile?

kcollman wrote:
I am researching a camcorder for my school. One thing I have run into is that some camcorders only record in MP4 file type, which is not compatable with Windows Movie Maker (this is the software that all faculty have). Also, we are a Career and Technical Center - so we have a wide range of settings - outside and inside - good light and bad. Our price range is around $500.00. Can someone explain the different file types and which file type is the best and most versitile?
Do you have any Vista or Windows 7 computers there? If so, you can get the latest version of Windows Movie Maker for free from the Live Essentials Download package which supports the formats used by the low-end camcorders in your price range. Otherwise, you will have to use a media package such as Nero or some other such thing which allows you to edit and create a variety of media files.

Camcorder Purchasing Suggestions

Looking to buy a camcorder for home movie-type shooting, and I'm looking to find something that will work with iMovie more or less out of the box without workarounds and jumping through a lot of hoops. Anyone have any suggestions? I don't have a way to burn to Blu-Ray at this point, so SD would be a viable option, although I'm not averse to future-proofing with HD as I'm sure I'll be adding a BR burner at some point down the road...
Thanks in advance for any thoughts folks might have.

This is the 'official' Apple iMovie 09 camera support list however I find that it is not quite complete:
http://support.apple.com/kb/HT3290
Regards,
Z

Used eMac purchase recommendations? (long)

I'm looking to buy an eMac for a friend and trying to decide between two options. They're both combo-drive:
1. 1.25ghz with 1ghz ram with about 10 months left on the Applecare warranty;
or
2. 1.25ghz with 256 ram with basically zero mileage on it but no warranty (it's owned by a family friend who I know tried it for about a week and then went back to her old computer.)
Option 2 would be a little more expensive, plus more memory would be needed. I'm leaning toward 2 because hey, it's brand new, but I'm concerned about the lack of warranty.
I've run Hardware Test on it, got online, played around with the applications, and there are no issues. Is this about all I can do to test it out?
Also, how much of a factor is usage? Option 1 has been in use every day with some bigger applications- is it more likely to fail sooner? I realize there's no way to predict longevity, and from my own experience I know that Macs last forever, but I'm not familiar with eMacs and maybe there are some issues that I'm not aware of with them.
Note also that my friend plans to use this for a long time. She had an older eMac for many years that she loved before it got stolen, and doesn't do anything more intensive than email-internet-digital photos.
Any thoughts would be appreciated. Thanks so much.
Tracy

I'll second PT's advice; go for the larger RAM and the remaining warrenty. That the other computer was in use mainly means several thousand hours on the hard drive, but the mean expected life for the hard drive is measured in the hundreds of thousands of hours. The one not used much, if it's been sitting on a shelf somewhere, likely needs a replacement PRAM battery by now (although that's a trivially easy replacement; see eMac - Do-It-Yourself)
You may want to check the eMac serial number against the ranges cited in eMac Repair Extension Program for Video and Power Issues

Router Purchasing Recommendations

On my home PC(Win ME, DSL) I have connected a Microsoft MN-500 router. I use a laptop(win XP) with the MN-500 wireless adapter card. I have problems with this router and would like some suggestions for a Linksys router and adapter card. Thanks.

Some of your problem will be the Windows ME. Microsoft stopped supporting this product in July 2006.
Likewise, many vendors, including Linksys appear to have stopped writing software for Windows ME.
So, with many of the newer Linksys routers, you will not be able to use any of the "Easy Install" software if all you have is Windows ME. Likewise, you will probably have trouble finding Windows ME drivers for any of the newer wireless n adapters.
Access to the router's setup web pages, via Internet Explorer, might work, allowing you to setup the router, but even this is not guaranteed.
Since Microsoft has not supported Windows ME for more than 1.5 years, then any security holes that have been found, have not been patched. Therefore using Windows ME poses a security risk when you connect to the Internet. My advice is to upgrade your operating system to at least Windows XP, SP2. This should also eliminate some compatibility problems that you are having. Perhaps even your existing router and wireless card will start working.
If you are insistant on staying with Windows ME, then I would suggest you stick with some of the older wireless g routers and wireless adapters, and make sure you can get Windows ME drivers and software before you buy.
Message Edited by toomanydonuts on 03-02-2008 02:59 AM

Purchase recommendation

I currently have a Linksys BEFSR41 - EtherFast Cable/DSL Router with 4-Port Switch. I love it but it's time for an upgrade. Trying to sort through the massive selection of routers available I just haven't found what I'm looking for yet. Perhaps someone here can help me find what I need.
Three features are a must for me on my next router:
1)URL filter that will let you type in filter strings. If any part of a URL matches a filtering string, the router will block the request. The ability to add a large list of filters quickly would be very helpful.
2) SPI Firewall that allows and translates FTP protocol over the gateway. My current router fails at this task and the result is a half working FTP server that most cannot access.
3)Wireless support(doesn't have to me N or anything specific, just enough for laptop web access)
I've had good experience with linksys and would prefer to stay with them, but I am open to other suggestions as well. Any feedback is appreciated.

Hi... you can go for any WRT54G, WRT54GS or WRT54GX series of router. All these routers has SPI firewalls and you can block the sites with url as well as keywords. If you also want to Create VPN tunnel along with FTP server, you can go for WRV54G router.

How to import MPEG-1 camcorder video into iMac?

I have a Sony digital camcorder purchased in 2002 which records to film. I would like to import the video from this camcorder into my iMac (purchased Jan. 2007) for playback on the computer and to burn the video to DVDs.
When I hook up the camcorder to my computer via Firewire cable and turn it on to the VCR position for importation into the iMovie HD program, nothing happens. There is no communication between the camcorder and the iMovie HD program. None of the steps recommended by Apple that I have tried to establish communication between the camcorder and iMovie HD have worked. It appears that the camcorder format (MPEG-1) is incompatible with iMovie HD.
I will appreciate any knowledgeable advice on how to successfully import this video into my iMac for the intended purposes.
Bob

Thanks for your responses.
I’m embarrassed to admit that I miscued in attempting to import the camcorder video into my computer. I corrected my mistake and successfully imported the video, watching it on the iMovie monitor and seeing the video clips appear as the import proceeded.
I added the clips to the movie and saved the project. I just got through playing back the whole movie. Yippee!
I was surprised that this 12-minute recording produced a movie file size of 2.14 GB. Ouch! Is this normal? If so, I’m glad I opted for a 500 GB hard drive on this iMac!
You may be wondering where I went wrong in my initial attempts to import this movie into my computer. John was right in saying “...it should be as simple as you thought.” Simple, that is, if you follow all of the necessary steps! Where I missed the boat was in not clicking the Create button after entering the various pieces of information into the Create Project window. I obviously overlooked the fact that Apple treats the importing of a simple camcorder video into a computer as a major movie-making event. The next time I go through this exercise I’ll don my Martin Scorsese hat to make sure it doesn’t happen again!
The next step will be to burn this movie to a DVD. Wish me success as I research how to do this without any further miscues.
Bob

What software would you recommend for an HP Z230 Workstation?

I just purchased a new Hewlett Packard Z230 Workstation with the intent to catch up on a big backlog (hundreds of hours) of family videos I want to clean up and edit. This computer is configured as follows:
Intel I7 4770 Quad Core running 3.4 GHz (showing 8 processors in control panel/system/processor)
16 GB ram
256 GB solid state C: drive
3 TB 7,200 rpm D: Drive
nVidia Quadro K2000 video card with 2 GB video ram
Windows 7 Pro 64 bit
When I bought this, I planned on using Cyberlink PowerDirector because they advertised it to run well with the features on this computer. I downloaded a trial version of Power Director, and it met my functional needs. But it locked up three times in an hour. When I wrote Cyberlink, they asked for information like the DxDiag.txt file that describes my computer, and the Windows Event logs of the lockups. Their response was BAFFLING, because they said they design their software for "consumer level platforms," and since they don't test their software on "workstations," they cannot recommend my using it on the Z230.
That said, I'm now looking for alternate software. I've used Pinnacle a lot in the past, but it has changed so much from the version I used, I'm not wed to any brand at this point. In addition to usual editing capability, I want to verify that the software I buy has some specific capabilities I need:
-- Ability to crop video clips and expand the remaining cropped scene back to 16:9 (because I have some incroachment in some video clips from the lens hood of a camera).
-- Ability to normalize audio levels for different clips (some too loud or too quiet) before producing the video.
-- Desired, not required: Ability to burn BluRay or DVD on a separate computer than the one where I am editing.
Most, if not all, editing software has these abilities now (PowerDirector and Pinnacle do), so this shouldn't be a problem, but I just want to check.
Any help or guidance would be appreciated.
Thanks,
Terry Quinn

Jim,
Thanks for the recommendations.
You'll get a kick out of this. I started with a Betamovie in 1984, switched to Hi8 in 1993, and D8 in 2005. My initial editing was from one beta VCR to another one. Then I bought a good Sony TR101 Hi8 camcorder, and soon bought a $1,300 EV-S3000 Sony Hi8 VCR that connected to the TR101 by wire, which gave some syncronization of the linear edits (about plus or minus 3 frames when it was happy). In 2004 I bought a powerful (for then) computer and Pinacle Studio 9, which with some upgrades is still what I've edited with until now. Some of all three formats of video have been digitized (or downloaded from the D8) as .avi using various hardware. I expect to complete all of that as .avi.
I've just bought a new Panasonic HC-X920 camcorder (very nice) that produces files in .m2ts, which I think is AVCHD. As you can probably tell from my history, that may prove to be my last camcorder purchase and format change. I have no plans now to shoot 4k.
I checked, and I've overstated the number of hours of video I have left to do. I recorded just under 200 hours total in all three formats. 45 hours of that (the Beta) are fully edited, and about 22 hours of the Hi8 are finished. So I'm looking at about 130 hours of video I still need to edit, plus whatever I shoot in HD going forward.
I appreciate what you say about stability. I fought that with Pinacle 9, and frankly didn't change from that because I finally got it to run stably doing what I did for years. (However recently it has started behaving badly again, which is another reason I'm upgrading).
The Quardro came with the HP computer. The Quadro and GeForce both are spec'd on nVidia's website, and I assumed that since its specs were higher than the GeForce and "matched" Cyberlink's specs for OpenCL, I would be better with the Quadro than the GeForce. From what I'm hearing here and your recomendation, it sounds like I should sell the Quadro on Ebay and buy a GeForce. In case I still might end up with Cyberlink, I'll run the card model you suggested by them and see if they "bless" it.
I know the HP computer supports RAID, because I've seen that come up during boot-up. I always thought RAID was only about reliable backup. Are you suggesting that if I put a second 3 TB hard drive in my computer, and somehow tie it into RAID, that will improve performance, too?
Terry

How to setup initial purchase prices in item master.

How can I setup my purchase prices for the items which I have not purchased yet? I am running MRP wizard to get the purchase recommendations when I convert them to purchase orders or even on the recommendation list the prices are coming up zero. I do not want to setup price list since the prices are keep changing. Please note that this is only for the items which we have not purchased yet. Seems it works okay as soon as we do inventory transactions (goods rec or inventory rec).
Please let me know if anyone has come across to this situation.
Tkx

That is right. Nothing changed. The only differences are more transactions recorded. All zeroed out themselves. I have done it couple of times.
You can check the item posting history and got two postings such as +1 and -1. That is all.

8mm film to IMovie

Does anyone have a suggestion as to how I can get from 8mm film to IMovie?
I had 400 feet of 8mm transferred to DVD But IMovie won’t accept it. Says QuickTime can’t parse it.
Called Apple and asked if QuickTimePro might do the job. The answer was yes and 100 bucks later I had Toast 8 Titanium. Rather than send it back( I thought I’d ordered QuickTime Pro) I called Roxio and asked if Toast would convert the DVD to something IMovie could use. Again, the answer was yes.
When I used Toast it gave me a message that it couldn’t do the job because the DVD “might be copy protected”. A call to the DVD provider indicated that the DVD was copy protected ... even tho’ it is my film on the DVD.
Someone said to try MacTheRipper. I did and it did rip the movie from the DVD but it was still “copy protected”. Running that through Toast didn’t help.
On online site suggests (buying) a digital movie camera and recording my movies from the projected movies, then transferring that to my MAC. I’ll probably do that if I can’t find something simpler.
I still have over 7,000 feet of 8 and super 8 film to work with so, if anyone has a suggestion I’d very much appreciate it?
For info, I’m very much an amateur.
IMAC G 5 (Intel) IMovie 6.03 QuickTime 7.0.3
and, I just downloaded all the info in IMovie comments re: help with deciding camcorder purchase .
Thanks,
JIm

A fascinating project!
My older brother had 4 hours of (silent) 8mm cine film dating back to 1958-1980 (when he finally bought a video camera!). He wanted me to convert them to carefully edited DVDs, with music, sound effects, titles and so on. Like a madman I accepted the challenge! To make life easier he lives in Belgium and uses a PC!
The process, to cut this short, was as follows:
At considerable expense he had all the film transferred to four DVDs in some PC-only friendly mpeg codec, and sent them to me.
I used Streamclip and the Apple mpeg thingy (saving time by not loking it up) to convert these to Quicktime DV files. To make life even easier, the Belgian moron who did the conversion to DVDs had not done so in chronologal order!
That made for a very large QT file, which I imported into iMovie, and set about carving it into date order, re-exporting the various years to QT as individual files, and then importing into iMovie projects to edit.
Only a couple of months later I had it organised into three projects, each of an hour or so, beautifully edited with titles, transitions, music, sound effects and other bells and whistles, and burnt them to 3 DVDs. I was generally agreed that I deserved an Oscar for technical merit!
That was just to let you know that it can be done!
Your only real hurdle is the copy protection. Can you get a fresh set that is NOT copy protected?
But before you even start I heartily recommend that you update your OS and all software to the latest versions, particularly Quicktime, and make that Pro.

Project material requirements to consider plant stock first

In some ERP systems, we have project specific BOMs and when the requirements are exploded and netted, the system first tries to see if the demand can be met from plant stock. If full or partial demand can be met from the plant stock, the system recommends a stock transfer order from general (plant) inventory to the project.
Any unmet requirement generates a project specific 'mrp-planned' order (purchase or production recommendation). This way, the planners and financial can see what existing plant stock can be used for a project and they can use this info for financial planning. Once the planner determines that the existing plant stock is usable for the project, he/she can confirm and 'execute' the transfer order which prings the plant stock to the project stock. For engineering or technical reasons (single lot date code requirements) the planner can choose not to accept the stock transfer recommendation (either fully or partially) and manually create purchase recommendation to cover the quantity.
I have read some posts here but it is not clear that IN SAP PS if the collective indicator is set (or not set), would one be able to see, either directly or indirectly, what plant stock is recommended to be transferred as project stock?
Can the behavior of described ERP system be modeled?
Thanks, experts.

Hi,
Please also try the following settings in Material Master to consider the item from plant stock ..
View : MRP1
MRP Type : PD
Lot Size : MB
View : MRP 2
Procurement Type : F
View : MRP 3
Strategy Group : 70
Mixed MRP : 3
Availability Check : 01
View : MRP 4
Individual/coll. : 2
Thanks
Abdul

Camcorder purchase recommendations?

Similar Messages

Maybe you are looking for