Camera and soft corners

Noticing the corners are really soft. Doesn't matter if I use Manual mode or Superior Auto. I previously had an iPhone 4S and used the camera to take photos of documents and receipts for record keeping. I never noticed the corner softness of images as bad as I do with the Xperia Z1.
Is this considered normal? I'm a little disapointed considering Sony touts the quality of the camera on the Z1 with its 1/2.3" sensor size and Sony G lens.
Image attached was taken using Manual mode at 20MP, straight out of camera (except resized for forum). Focus was set right in the center. Center is sharp, but looks really bad in the corners.

By soft corners, I mean the image is sharp at the center and gets progressively blurred towards the corners of the image.
Here is link to image on Box.com: https://app.box.com/s/kduqqsyvnqecb1s0q12k
Also took photo of same document using my Samsung Galaxy Note 8.0 and the corner softness is not nearly as bad: https://app.box.com/s/wokr58ni09agwx6h2mvl

Similar Messages

  • Digital camera and MBP

    I just bought a new Canon Powershot S3 IS digital camera.
    I haven't used it yet, just opened the box.
    It comes with a CD, "Digital Camera Solutions" that they say
    you need to install in order to be able to download pictures from camera to the computer.
    My question is this: do I really need this program?
    Or can iPhoto take care of downloading my pictures?
    I don't really want to install something that I don't need.
    Thanks!

    I just bought a new Canon Powershot S3 IS digital
    camera.
    I haven't used it yet, just opened the box.
    It comes with a CD, "Digital Camera Solutions" that
    they say
    you need to install in order to be able to download
    pictures from camera to the computer.
    My question is this: do I really need this
    program?
    Or can iPhoto take care of downloading my pictures?
    I don't really want to install something that I don't
    need.
    Thanks!
    PowerShot S3 IS
    Shake-free, powerful zoom for razor-sharp photos and movies.
    * 6.0 Megapixel.
    * Canon 12x optical zoom lens with Optical Image Stabilizer.
    * High quality, full motion movie shooting.
    * Super fast DiG!C II Imaging Processor.
    * Print/Share* Button for 'one push' printing and downloading of images straight from the camera.
    Equipped to handle a wide variety of scenes from sports events to landscapes, the PowerShot S3 IS offers creative functionality in conjunction with a powerful Canon 12x optical zoom lens and full motion movie shooting. With a 35mm equivalent focal length of 36-432mm, Optical Image Stabilizer and USM technologies work in conjunction with an ergonomic design to support razor sharp, shake free long distance still and video shooting.
    CANON'S FORMULA FOR AMAZING DIGITAL PHOTOS
    - High resolution 6.0 Megapixel CCD delivers photo quality prints up to A3 size.
    - High-resolution, Canon 12x optical zoom lens (36-432mm equivalent) featuring, Optical Image Stabilizer technology for shake free shooting.
    - High speed start-up, fast autofocus, smooth continuous shooting, faster overall processing and superior image quality thanks to revolutionary new DiG!C II Imaging Processor.
    ADVANCED CANON LENS TECHNOLOGY
    - Ultrasonic Motor for quick and quiet zooming, as fast as 1 second from wide angle to telephoto.
    - UD element minimises chromatic aberrations at high zoom settings.
    - Dedicated Macro button allows easy toggling between Normal Shooting, Macro Shooting and Super Macro for close-up shooting to 0cm.
    - Optical Image Stabilizer technology delivers hand held, blur free long distance photos and movies.
    SOPHISTICATED MOVIE MODE
    - Movie recording with maximum 30 frames per second 640x480 (VGA) image quality delivers smooth full motion movies with stereo audio up to 1GB/1hour. (*High-speed 1GB card or higher required).
    - Dedicated movie record button allows users to seamlessly switch between still photo and movie recording modes and shoot still images while simultaneously recording movie footage.
    - Stereo recording capability for superb sound quality.
    - Playback modes allow first frame, last frame, next frame, previous frame, fast forward, fast rewind and slow motion functions for reviewing and editing of movie files using the camera's LCD screen.
    - High-speed editing of long movie files allows editing from the camera's LCD screen to create free space for further recording.
    EXPLORE DIGITAL PHOTOGRAPHY
    - Bright, wide viewing 2.0" LCD vari-angle monitor perfect for reviewing and sharing your photos.
    - A comprehensive range of shooting modes, from complete control to full auto, including; Aperture(Av)/Shutter(Tv) Priority, Program(P), Manual(M) and Custom(C), Portrait, Landscape and Night Scene as well as a range of pre-set scene modes.
    - Selectable 9 point AiAF, and 1 point AF for precise focusing in any shooting conditions.
    - Selectable sensitivity from ISO 80/100/200/400/800 - like having different ISO film loaded at once.
    - New Widescreen recording mode supports viewing on widescreen TV's and printing widescreen images.
    CANON CONNECTIVITY
    - Print/Share* Button allows easy 'one push' printing and downloading straight from the camera.
    - Direct photo printing with Canon direct printers and other PictBridge compatible models.
    - Supports Exif 2.2 tagging for Design Rule for Camera File System standard allowing superior print image processing.
    - Canon's complete image management software suite for fast and easy download, display, email and printing of images, creating panoramic pictures and storage.
    - Picture Transfer Protocol supports driver-less image transfer, viewing and deletion between camera and computer with newer operating systems. (Windows XP or Mac OS X v 10.1/10.2/10.3/10.4).
    STANDARD ACCESSORIES AND SOFTWARE
    - Lens Cap, Neck Strap NS-DC4, 4 x AA Alkaline Batteries, Stereo Video Cable STV-250N, Interface Cable IFC-400PCU, 16MB SD Card, Software Starter Guide, Camera User Guide, Quick Start Guide, Direct Print User Guide, Digital Camera Solution Disc - ZoomBrowser EX (PC), ImageBrowser (Mac), Drivers (PC), PhotoStitch, PhotoRecord, RemoteCapture, Apple QuickTime (PC), ArcSoft PhotoStudio
    OPTIONAL ACCESSORIES
    - Tele Converter Lens TC-DC58B
    - Wide Converter Lens WC-DC58A
    - Lens Adaptor/Hood Set LAH-DC20
    - Close-up Lens 500D (58mm)
    - High-Power Flash HF-DC1
    - Battery and Charger Kit CBK4-300
    - Compact Power Adaptor CA-PS700
    - Soft case SC-PS3
    - Interface Cable IFC-400PCU
    - Compact Photo Printers
    *Compatible printer required for Direct Printing. Compatible Windows computer required for direct download.
    **All pricing indications are recommendations (inc. GST) and are intended for guidance only. Dealers are not obliged to comply with recommended pricing. Please contact your nearest Canon dealer for specific pricing, product and inclusion information.
    Does not mention it but it will work with a Mac or PeeCee.
    MacPro 2.6  iMac 1.9  iMac 700  Mac Mini 1.42 Mac OS X (10.4.6)  MBP 17" 2.1  PB 1.67 15"  iPod U2  Nano
    William

  • Camera and music player quality deteriorated on n8...

    i recently bought an n8 with belle pre-installed. I was quite disappointed with the results of the camera and the sound of it's music player. The music player with headphones on produces a very soft sound and it is the worst i sound i have ever gotten from a nokia. Compared with the n8s on anna and the original software i have seen, it has been greatly deteriorated with belle installed. My c6-01 and e6 gives even clearer pictures and has a whole lot better sound quality. Could nokia please immediately release a fix for these. I certainly think nokia would lose so much more loyal customers with this botched belle upgrade or i should say downgrade.

    yeah i agree..n8 has loose his camera quality after this belle update...i am very disappointed with nokia.the best camera mobile phone has lost it quality..

  • WP 8.1 camera and group tile issues

    Hi all,
    My ATT Lumia 920 was just updated to Windows Phone 8.1 (yay!!!)! Love Cyan but ever since the update I have been experiencing issues with tiles and my camera.
    When I try to create tile groups by hovering one tile over another, the start screen only shifts the tiles away from each other instead of creating a new group.
    Also, every time I launch my camera from ANY app it tries loading for a second or two and then immediately crashes without even making it to the viewfinder screen.
    No matter how many times I restart or soft reset my phone, these problems persist. It's not a problem that comes and goes; I haven't been able to launch my camera or group tiles at any point since the update.
    Here's what my extras+info screen says:
    Lumia Cyan
    Accessories Agent 3.0.2.6
    Contacts initializer 1.0.8.8
    Firmware Update Notifier 1.1.0.3
    Glance PinBoards App Agent 1.3.1.7
    Lumia Share 2.5.1.0
    Rate us 2.5.5.1
    Silent Installer 1.5.0.0
    SIM Unlock 1.0.0.5
    SMS vCard Receiver 1.2.1.7
    SpamFilter 1.9.3.1
    Manufacturer Name
    RM-820_nam_att_100
    Mobile Operater ATT-US
    Configuration ID 443285
    Core Build ID 3051.50009.1425.10367
    Application Version 3.11.2.1
    Will I need to hard reset my phone? Since all of my photos are backed up to SkyDrive (or OneDrive or whatever it's called this week) I'm not concerned about losing that data from my phone. What I am wondering, though, is if a hard reset will make me lose all my text messages (even though text message backup is on) or if it will void any warranty that may be on my phone.
    Any advice would be much appreciated! Thannks in advance.

    Hi @AdamLumia920 ,
    Before resorting to drastic measures, does the camera refuse to work in both Nokia Camera and the built-in Camera app?
    Also double-check that the OneDrive still images and video are backed up in full resolution? This depends on the backup settings and the capabilities of the phone camera hardware. - It was a pleasant surprise for me that SMS and MMS are restored in WP8.1, also when not restoring a backup during the initial setup after a factory reset.
    The grouping of tiles feature is planned for the next update (and currently in the Developer Preview phones).
    Hans

  • Why does Edge Animate convert circles and rounded corners into "classic" rectangles?

    Hello Community!
    When creating animations with circles or rounded corners in it, I came across with something strange.
    I published it as .oam-file for Adobe DPS and the circles and rounded corners where converted into rectangles.
    Does anybody know a solution?
    Thank you in advance!

    Hey broekt,
    If you're using the Desktop Viewer ot preview your AN content, some stuff (such as rounded rectangles) isn't supported in their version of Webkit. For true rendering make sure to always test on your iPad
    Sarah

  • How to capture an image from my usb camera and display on my front panel

    How to capture an image from my usb camera and display on my front panel

    Install NI Vision Acquisition Software and NI IMAQ for USB and open an example.
    Christian

  • Is there a way to switch off by default the video on FaceTime? I only ever use this app for audio/calls and hate the video being on. I especially hate that if I leave the app open to receive calls it means the camera and green light are on.

    My issue is that I can't find a way to have the camera switched off when the app is open and so this means if I want the app open all day to receive calls then the camera is going to be on the whole time. Even if it didn't potentially drain the battery, or add to the CPU usage or whatever else may cause any problems whatsoever (wheel of death!), I just don't want the camera on as I don't see myself ever wanting to use the video call feature but I would use the audio/call multiple times throughout the day to make and receive calls. The camera being on when the app is open is enough to prevent me from using the app. Also ever since seeing that episode of criminal minds where if you saw the green light on above the screen then it meant the killer was watching you!
    Basically I just can't believe there isn't a way to disable the camera whilst having the app running. I know when initiating an audio call the camera goes away, but I would like the camera away the whole time. To me it just would make sense that if you click the video option then the camera is on, and if you click the audio option then the camera goes off. It just seems waaaaay to basic a thought for apple to have missed... Let's face it, we're not all as pretty as the people in the apple adverts and don't want to see our ugly mugs staring back as us when we work all day at our macs!

    I have exactly the same concern. It seems it would be a simple fix for Apple to allow users to turn off the camera (and even the mic) while keeping FaceTime open -- especially now that it turns out FaceTime must remain open in order to send and receive iPhone calls on a Mac.
    I like to think this new functionality of FaceTime will be baked into a future release of Yosemite, as the current setup has that not-quite-finished feel of a work in progress. In the meantime, there's nothing like a little piece of Post-It stuck over the camera to keep the NSA from watching your face as you type a post to the Apple Support Communities.

  • Why will the front camera on my iphone 4 not work? On both the camera and snapchat.

    Why will the front camera on my iphone 4 not work? On both my camera and snapchat

    Hi there bananas321,
    You may want to try force closing all open apps and resetting the device as an initial troubleshooting step. Take a look at the articles below for more information.
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    -Griff W.

  • Can't access photos in camera roll - camera and  photo app crashes

    Have iphone 4 with iOS 5.0. Took pictures but now I can't access any photo in the Camera Roll. When I now try to take a picture, Camera app crashes. If I try to access the Camera Roll via Photo App, it too crashes. Can't see the photos from iTunes either. Shows it as unknown data. Is there anyway to rebuild the photo library or remove a corrupted photo since I think that is the problem. Any help would be appreciated.

    Thanks to Steve Kehlet who posted the solution that helped me and saved my day, https://discussions.apple.com/message/16405821#16405821
    Follow the link:
    http://www.iphoneincanada.ca/how-to/how-to-fix-iphone-camera-roll-crash-and-phot os-turned-to-other-in-itunes/
    You will need to download PhoneView, but the free 7 day demo does the job - and my camera and photo app are up and running again!

  • Camera and ipod shuffle do not show up on desk top when connected

    Kodak camera and ipod shuffle do not show up on desk top when connected.  Trying to download pictures and adding my music to ipod shuffle, Anyone have any suggestions.

    Have you plugged in another USB device to ensure that the USB ports are working?
    Suggest you buy (about $10 - $20) a USB memory card reader. Just plug your camera's memory card into it & copy the pic files to your Mac. Quicker & easier than interfacing the camera for pic transfer.
     Cheers, Tom

  • I have Lightroom 4 and a new 70D camera and when I try to important my photos Lightroom says it doesn't recognize my CR2 files.  I have downloaded plugin for the camera, but it still doesn't work.  Can you help?

    I have Lightroom 4 and a new 70D camera and when I try to important my photos Lightroom says it doesn't recognize my CR2 files.  Can someone help?  I have downloaded 8.3 from Adobe, but still doesn't work?

    Lightroom doesn't use the Camera Raw plug-in. All of the Camera Raw technology is part of the Lightroom program. You will either have to upgrade to Lightroom 5 or use the DNG converter to create digital negative copies that can be used with Lightroom 4.

  • I uploaded pictures from a second camera and my iphoto created a second library, how do i get back to the first library?

    I uploaded pictures from a second camera and my iphoto created a second library, how do i get back to the first library? Can anyone help?

    I have no idea what you did or what happened - but I can assure you that loading from a different camera does not create a new library
    So you need to supply information and someone here will assist you in sorting this out and figuring out what you really did
    What version of iPhoto do you have? What version of the OS? Why do you think that a second library has been created? What do you see when you launch iPhoto with the optipon kep depressed and use the select library option? Where is your iPhoto library normally?
    Anything else you can tell us that might help?
    LN

  • Problem with Photos and Camera and Sizing Set

    I have a 3gs and upgraded to 4.0. Things seemed fine but yesterday when I opened up the Camera Roll in Photos there was 1 picture showing and a large black rectangular box. No other photos were showing. I tapped on the black box and it showed all the photos using the slider to go from 1 to the next. I couldn't figure out how to get rid of the black box so that all the photos showed up normally, so I deleted each of the photos. The size of the box shrank as each photo was deleted. Then when I went into Photos, it opened with an empty screen and immediately closed. I then tried to use the Camera and it started up and immediately closed. So I sent myself an email with a photo and saved it to Photos. Its there and so is the black box! Now the camera will work! To further complicate, I decided I'd use the photo for wallpaper. Problem is I can't size it!! I can move it and size it with my fingers, but then when I release, it immediately pops back to full size and I can't "Set" the image size. Does anyone have any idea what's going on!!

    Well I solved it. I uploaded my photos to My Gallery. Then I took a photo with the camera and saved it. I then deleted all the other photos except the one I just took. Then I exited Photos and then came back in and it was working fine, so I then downloaded the photos that I had just uploaded to My Gallery. Still have a problem though with sizing the photos for the Lock and Home screens. I can't get the Set button to hold a size. Any ideas on that?

  • My iPad has suddenly lost my camera and FaceTime apps. I've tried to go into the restrictions however it is asking for passcode I never set up. Then I've tried to do a reset but it to is asking for a passcode that I never set up.

    MY iPad has suddenly lost my camera and FaceTime apps. Yes I've tried to modify in the restrictions however it is asking for a passcode that I never set up.  I've also tried to go and reset my iPad but it to is asking for a passcode. Yes I've tried any passcode I've ever used. And I can't get anywhere. Help!

    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/HT1212
    Follow the section for recovery mode restore.

  • I am trying to get ios 4.3 softeware update for iPad1. When I plug in my iPad to my PC, mu PC tinks that it is a digital Still Camera and will not go any further.

    I am trying to get ios 4.3 software update for my iPad 1. Have downlosded Itunes and apple softwareupdates to my PC, but when I plug in my iPad the computer thinks it is a digital still camera.  how do I get my PC to reconize that it is an iPad

    Must point out that this is the first time I have ever tryed to update my iPad, other than when I got it started at the store where I abought it. 
    This is what is happening to me.  the PC is on and I have3 the Itunes on the screen but as soon as I plug in my iPad my PC seems to think that it is a digital still camera and emediatly starts suting down as it seems to think the iPad(digital camera) is going to harm my PC.  PC will not go anyfurther than a warning screen and I have to then shut it down  unplug the iPad and start again.  HELP please

Maybe you are looking for

  • Mapping activity step in BPM

    I am trying to find out the complex conversions used in BPM process modelling activities such as mapping activity. What are the different complex conversions/functions which are very widely used/required in BPM projects? I am talking about custom fun

  • ORDERS01 IDoc goes in status 51

    Hello experts, We have a scenario where an inquiry (IN) needs to be created by ORDERS01 IDoc issued from the SAP PI system. PI translation happens fine and IDocs are being created in the R/3 system but they all go in status 51(BD87) with the error ED

  • Cannot transfer iTunes library to iPhone 4S

    for some reason I cannot transfer my iTunes library music to my iPhone 4S.  I keep getting errors.  I tried EVERYTHING!    HELP!!

  • Exporting from CS6 to PDF Hyperlink Problems

    Hi there, I am developing a document in InDesign CS6.  The document is intended for viewing electronically and will include over 150 hyperlinks to different pdf files.  I followed the steps for adding a new hyperlink by chosing windows, interactive,

  • Double Click / Single click problem

    Recently i have been noticing when i single click, using either my magic mouse or trackpad i end up getting a double click, even when my double click is set to as slow as possible. Is there anything that can be done to stop this, as this makes many o