I am trying to get ios 4.3 softeware update for iPad1. When I plug in my iPad to my PC, mu PC tinks that it is a digital Still Camera and will not go any further.

I am trying to get ios 4.3 software update for my iPad 1. Have downlosded Itunes and apple softwareupdates to my PC, but when I plug in my iPad the computer thinks it is a digital still camera. how do I get my PC to reconize that it is an iPad

Must point out that this is the first time I have ever tryed to update my iPad, other than when I got it started at the store where I abought it.
This is what is happening to me. the PC is on and I have3 the Itunes on the screen but as soon as I plug in my iPad my PC seems to think that it is a digital still camera and emediatly starts suting down as it seems to think the iPad(digital camera) is going to harm my PC. PC will not go anyfurther than a warning screen and I have to then shut it down unplug the iPad and start again. HELP please

Similar Messages

IPhone detected as a"digital still camera" and will not show in itunes

Hi
My friend bought a 16gb iphone today and when he plugs it into his pc it comes up with auto play and a list of things you can do (obviously the wrong driver) it is not shown in itunes. So far we have re installed itunes, restarted the device, restarted the services but nothing seems to be working.
He has a windows vista laptop and 16gb iphone, latest itunes.
Any suggestions

magic_man,
The iPhone reports itself as two devices, a Digital camera, and an iPhone.
The digital camera will use the standard digital camera driver.
The iPhone will use the iPhone driver, and is then handled by the Apple Mobile Device Service that must be running for iTunes to see the iPhone. With 64-bit Vista if you don't install the 64-bit version of iTunes, it won't be running. There are other situations where it may have been stopped in services, or prevented from updating by security software on the computer.
The article linked in the thread has some suggestions for making sure the Apple Mobile Device service is running correctly.
Hope this helps,
Nathan C.

HT4061 good morning! I just did a software update on my phone (finally) last night and now my phone will not come on. All it keeps showing is the charger pointing up to a blue circle with iTunes inside and will not go any further. Can ANYone please expl

Good Morning,
I just did a software update on my phone (finally) last night and now my phone will not come on. It keeps showing the charger pointing up to a blue circle with iTunes inside and will not go any further. Can ANYONE help me please???

The phone is in restore mode and the picture is telling you what to do. Connect the phone, by cable, to iTunes in the computer you normally use for syncing, and retore the phone.

TS3212 i.m having issues with reinstalling my Itunes.it says that my apple mobile device faild to start and will not go any further

i'm having issues with reinstalling my itunes.it says that my apple mobile device faild to start and will not go any further

Hey there CrazyTC,
It sounds like you are unable to re install iTunes because the Apple Mobile Device service failed to start. Try restarting it with the following article:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/ts1567
Windows Vista or Windows 7
Close iTunes and disconnect the iPhone, iPad, or iPod touch.
Click the Windows Start button .
In the Start Search field type Services.
In the Programs section of the search results, Click "Services".
Select Apple Mobile Device and click Stop the service as shown below:
After the service has stopped, click Start the service.
After the Apple Mobile Device service has started again, open iTunes and connect the device.
Then if the issue is resolved, set the service to start Automatically with the same article.
If it is still not working, use these steps from the same article to completely uninstall iTunes and its associated applications and install a fresh copy.
Remove and reinstall iTunes and AMDS
If the issue continues after restarting AMDS, then you'll need to remove and reinstall AMDS and iTunes.
Completely uninstall AMDS, iTunes, and all Apple software. Click the appropriate links below for steps:
Windows XP
Windows Vista, Windows 7, or Windows 8
Restart the computer.
Download and install (or reinstall) the latest version of iTunes from www.apple.com/itunes. Installing iTunes will also install AMDS.
Restart the computer.
Start iTunes and connect the device. It should be recognized properly in Windows.
Thank you for using Apple Support Communities.
All the very best,
Sterling

Help! My iTunes is getting stuck on the backup and will not go any further

I have just bought a new iPhone 4S and would like it to have everything that my iPhone 4 had on it but it is proving very difficult. I have tried multiple times to back up my old phone without success - I did think that with the cloud and all the new **** that I wouldn't need to plug my iPhones in ever again but this does not seem to be the case at all. I have managed to back up my old phone on my laptop and have since put my apps, contacts, calendars, messages etc onto my new phone but now I would like my music which is on my PC. This is where the problem is - iTunes on my PC will not back up my old phone and it will now not sync with my new phone either... Is there a way around this or will I have to suffer with having no music on my new phone?? It seems that everytime I upgrade my phone I always have some sort of issue with iTunes - I just thought this time would be different with the new software etc...?
If anyone has any advice on the subject it would be very very greatly appreciated.

Go to iTunes/Edit/Preferences/Devices and delete your latest backup. iTunes has to be able to read your backup in order to replace it, if it can't be read, iTunes will stop at step one, which is backing up the device.
You can copy your purchased items to your computer without syncing. Right click on your phone in the device list and choose
Message was edited by: Ingo2711

My laptop is having trouble downloading and playing rentals from the iTunes store, I get a little way into the film and it stops playing and will not download any further. This has happened on two separate occasions, my laptop is under a year old?

I get a little way into the film (just 4 minutes this time!) and it stops playing or downloading. The remaining download time changes continually and will say anything from 6 minutes to 11 hours! My laptop shouldn't be the problem as it is under a year old and I haven't experierienced any other running problems with it... I hope I will not be charged for the film !!

I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items.

HT2463 Ive been having issues with my Aple TV. It workded great for 7 month and now it gets hung up trying to get to get time and date and will not go any further

Ive had issues with my Apple TV. I got it about 10 months agao and all was well. About 3 weeks ago, it hung up trying to update date and time. Apple repalced it and all was well with the new unit. Sat I went to use it and again this new unit as well hung up looking to update DATE and Time. It wont get pasted here, so nothing else happens
Any thoughts?
Garry

Depending on what iPhone you have when you get to the connect to wifi you should be able to activate your device over cellular data. Try doing a hard reset by holding the home circle button an power button until an apple pops up and the go through the setup again and when you get to the wifi part a option should be setup with cellular data iPhone 4 and above should give this option sometimes doesn't like showing up that's why u have to do a hard reset first

My imac will not boot- it gets stuck on blue screen and will not go any further

Since the last update to Snow Leopard- My computer seems to perform fine, but when I restart the computer or shut it down and then turn it back on- it gets hung. SOmetimes I get the You need to restart screen. But, most times, it goes to the blue screen. The mouse shows up and the dissappears. It shows back up and the dissappears again. Then the system working spiral comes on and off every few seconds. But- it never gets to the sign in screen. ANyone know how to fix? What am I doing wrong?

Does your iMac fail to boot every time or only some of the time? Here are some things to try:
- Boot into "safe mode", which will run the equivalent of Disk Utility's "repair disk" operation.
- Boot from the system install disc that came with that Mac with the "D" key held down to run the diagnostics. Run them several times to see if any hardware problems are reported.
- If you can't identify the problem or fix it any other way, download and install the OS X 10.6.7 "combo" updater.
- If that still doesn't help, try reinstalling OS X 10.6 over the top of what's on the disk.

When I plug my iPhone 5 into my Macbook air it just repeatedly flashes the trust question whilst vibrating and will not connect. My iPad connect to the macbook fine tho. Any ideas on how to fix this?

I want to connect my iPhone to my macbook to backup all my photos but it just vibrates constantly and flashes the trust computer question over and over.
Any help would be great.

Talked to AppleCare and it's most likely the fact that my MacBook has 3.0 USB ports and my non official charging cable can't support that. So yeah, I'll try a new cable, hopefully that's the fix.

I am running Windows 7 Professional. When I try to install Flashplayer, I get to step 3, and then the installation will not proceed any further. A blank dialog box appears, with Adobe Flash Player Installer in the upper left corner. I have tried to ins

I am running Windows 7 Professional. When I try to install Flashplayer, I get to step 3, and then the installaion will not proceed any further. A blank dialog box appears, with Adobe Flash Player Installer in the upper left corner. I have tried to install on Explorer, Firefox, and Chrome. Nothing works. Please help.
Thanks/ Scott

1. Restart your computer to stop any Adobe process that is running.
2. Click on the following Adobe link. Go to the bottom where it says "Still having problems?". Click on the version of Flash Player for your browser.
Installation problems | Flash Player | Windows

Trying to download additional content for Logic Pro X. My download status is 26.6 GB of 26.6 GB, but Logic will not move any further, not matter what I do. Any suggestions?

Trying to download additional content for Logic Pro X. My download status is 26.6 GB of 26.6 GB, but Logic will not move any further, not matter what I do. Any suggestions?

Thanks rhoydotp,
The download was actually the successful part! I had no issues with it timing out or anything. My problem was the actual install, after the download was complete. The installer just stopped about a quarter of the way up on "Alternative Kits" and never made it to any of the other kits. I think I'll try installing them one at a time like you said, and see what happens. Hopefully it works!
-marth3

HT1414 Can anybody help me my iphone is not starting it only shows apple logo and is not going any further i have tried to hard reset it but it still doesnot starts.Will anybody tell me How To start it...

Can anybody help me my iphone 4 is not Satrting it only shows the apple logo on start screen and is not going any further I have tried resetting it but it is still not starting.....Will anybody tell me whats the Problem....

First try a Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
From Here
http://support.apple.com/kb/TS3281
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Note:
Also consider Deleting any Apps you have Purchased / Downloaded but you now never use...

How do i download CC once I have put in redemption code? It keeps telling me that it has already been redeemed/activated and will not let me go any further.

How do I download CC once I have put in redemption code? It keeps telling me that it has already been redeemed/activated and will not let me go any further.

if you've used your adobe id to pay for a cc subscription, download the cc desktop app and install it, Download Adobe Creative Cloud apps | Free Adobe CC trial
use the desktop app to install your subscribed programs.

When I try to go on the internet with my iPad 2, the whole section is greyed out. I can see the webpage, but can not navigate any further.

When I try to go on the internet with my iPad 2, the whole section is greyed out. I can see the webpage, but can not navigate any further. I do have wifi access, though.

Try:
- A reset. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears
- Power off and then back on the router
- Reset Network Settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections

I have a mid-2011 iMac running Mavericks. When I click restart the computer goes to a white screen with a spinning circle and does not go any further until I hold down the power button to turn it off. What do I do?

I have a mid-2011 iMac running Mavericks. When I click restart the computer goes to a white screen with a spinning circle and does not go any further until I hold down the power button to turn it off. What do I do?

Ok, sounds like the safe mode boot worked... You probably don't want to always be in safe mode though (some reduced functionality) so does it do a normal boot now? If not, you should then reboot into safe mode and run Disk Utility. Then select Macintosh HD on the left hand side, and click the Verify Disk button. If needed, it will ask you to Repair Disk. If there are errors found, Repair Disk again until there are none. Then try another normal boot and reply with result, wether good or bad.

I am trying to get ios 4.3 softeware update for iPad1. When I plug in my iPad to my PC, mu PC tinks that it is a digital Still Camera and will not go any further.

Similar Messages

Maybe you are looking for