Camera driver for 15s-008TU

I could not find a suitable camera driver for the product 15s-008TU ( laptop 4th gen intel core i3). I have installed windows 7 64 bit OS on it. 

One from the folowing URL should be what you need to make it work.
http://h10025.www1.hp.com/ewfrf/wc/previousVersions?softwareitem=ob-131219-1&cc=us&dlc=en&lc=en&os=4...
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Similar Messages

  • How to get source code for WinCE 6.0 USB Camera Driver for ARM4I Processor

    Hi,
    I am implementing USB camera driver for my mini2440 board which has an ARM4I processor. The sample code
    "Windows Embedded CE 6.0 USB camera Driver" downloaded from:
    http://www.microsoft.com/downloads/en/details.aspx?FamilyID=2ef087c0-a4ae-42cc-abd0-c466787c11f2
    does not support ARM4I processors. When trying to generate in VS2005 Platform Builder my WinCE 6.0
    image for mini2440 with the Third party catalog items "MJPEG Decompression Filter" and "USB CameraDriver",
    the linker giver errors. Please advise where to find a working source code for USB (now revision 1.1
    ("full-speed") is supported in my WinCE 6.0 image) camera for my ARM4I processor. The code should 
    be in C# but C++ will be fine also.
    Thanks,
       Paul

    i get this on the hyperterminal when i run the cameradshowapp.exe
    Compulab Windows CE NAND X-Loader for CM-T35                                           
    Built Dec 20 2009 at 16:48:16                            
    Version 1.01.222               
    Commit Date 16/12/09                   
    Jumping to bootloader                    
    Microsoft Windows CE Bootloader Common Library Version 1.4 Built Dec 20 2009 16:                                                                               
    46:16    
    INFO:OALLogSetZones: dpCurSettings.ulZoneMask: 0x200b                                                    
    Texas Instruments Windows CE EBOOT for CM-T35, Built Dec 20 2009 at 16:48:10                                                                           
    Version 1.01.222               
    OMAP3430 Version 0x4b7ae02f (Unknown)                                    
    TPS659XX Version 0x10 (ES2.x)                            
    -OEMPinMuxSetup....                  
    System ready!            
    Preparing for download...                        
    INFO: Predownload               
    +FMD_Init        
    Checking bootloader blocks are marked as reserved (Num = 6)                                                          
    +FMD_Init        
    WARN: Boot config wasn't found, using defaults                                             
    +FMD_Init        
    OALFlashStoreOpen: 4096 blocks, 64 sectors/block                                               
    OALFlashStoreOpen: 2048 bytes/sector, 14 reserved blocks                                                       
    Calling LCD_TurnOn                 
    +FMD_Init        
    +FMD_Init        
    BLConfigureFlashPartitions: dwBootPartitionSectorCount = 0x5fff, partition actua                                                                               
    l size =0x4d3a!!!                
    Hit space to enter configuration menu 5...                                         
    Hit space to enter configuration menu 4...                                         
    Hit space to enter configuration menu 3...                                         
    Hit space to enter configuration menu 2...                                         
    Hit space to enter configuration menu 1...                                         
    INFO: Boot Device location = 0x8000020                                     
    Load NK image from flash memory                              
    +FMD_Init        
    ROMHDR (pTOC = 0x823b8c28) ---------------------                                               
      DLL First           : 0x4001c001                                 
      DLL Last            : 0x41c7c0d8                                 
      Physical First      : 0x84001000                                 
      Physical Last       : 0x863bbdec                                 
      Num Modules         :        294                                 
      RAM Start           : 0x863c0000                                 
      RAM Free            : 0x863d5000                                 
      RAM End             : 0x90800000                                 
      Num Copy Entries                        
      Copy Entries Offset : 0x85256e38                                 
      Prof Symbol Length  : 0x00000000                                 
      Prof Symbol Offset  : 0x00000000                                 
      Num Files           :        116                                 
      Kernel Flags        : 0x00000002                                 
      FileSys RAM Percent : 0x00000020                                 
      Driver Glob Start   : 0x00000000                                 
      Driver Glob Length  : 0x00000000                                 
      CPU                 :     0x01c2                                 
      MiscFlags           :     0x0002                                 
      Extensions          : 0x84002020                                 
      Tracking Mem Start  : 0x00000000                                 
      Tracking Mem Length : 0x00000000                                 
    NK Image Loaded            
    Launch Windows CE image by jumping to 0x80001000...                                                  
    Windows CE Kernel for ARM (Thumb Enabled) Built on Apr  5 2011 at 17:47:22                                                                         
    +OEMInit       
    ýSETDATAOUT access is OK....                           
    Forcing clean boot                 
    MainMemoryEndAddress = 0x90800000                                
    -OEMInit       
    +FMD_Init        
    Dumping registry defined VK                          
    Row 0:  0x18    0x9     0x25    0x0     0x0     0x0                                                  
    Row 1:  0x26    0xd     0x28    0x0     0x0     0x0                                                  
    Row 2:  0x27    0x24    0x23    0x0     0x0     0x0                                                  
    Row 3:  0x0     0x0     0x0     0x0     0x0     0x0                                                  
    Row 4:  0x0     0x0     0x0     0x0     0x0                                             
    Row 5:  0x0     0x0     0x0     0x0     0x0     0x0                                                  
    SMSC922x: Core Ethernet Init.                            
    Lan9220 identified. ID_REV = 0x92200000                                      
    SMSC922x: MAC address = 00:01:c0:0a:a0:db                                        
    Lan9220 identified. ID_REV = 0x92200000                                      
    SMSC922x: MAC address = 00:01:c0:09:88:80                                        
    SDIO8686: Loading Driver [version = 38.p44]                                          
    SDIO8686: Reset with TPS GPIO 2 --> done                                       
    !!!Kernel mode PSL 'PRdr' de-registered!!!                                         
    !!!Kernel mode PSL 'HRdr' de-registered!!!                                         
    !!!Kernel mode PSL 'FRdr' de-registered!!!                                         
    EHCI USB Host: HcdPdd_Init+                          
    [OTG] OMAPMHSUSBOTG::Init()+                           
    OMAPMHSUSBOTG::PostInit(): Start.                                
    DSPLINK Module (1.61.04) created on Date: Jun 24 2009 Time: 16:30:52                                                                   
    Display parameters:                  
            Height = 0x280                     
            Width = 0x1e0
            HSW = 0x20
            HFP = 0x8
            HBP = 0x17
            VSW = 0x1
            VFP = 0x4
            VBP = 0x3
            DVI is not enabled
            PixelClkDiv = 0x7
            LogClkDiv = 0x1
            ClkSelDSS = 0x5
    TD035:: LCDTurnOn
    TD035STEE1: Turned display on.
    TD035:: Finished LCD VGA init
    AUTOLAUNCH: Checking HKEY_LOCAL_MACHINE\Startup key for programs to run.
    Can't open HKEY_LOCAL_MACHINE\Startup key.
    [WiFi]: Firmware Version: 9.70.3.23
    CCaptureFramework: Failed setting up the camera data.
    CameraDShowApp: Initializing the camera driver list failed.CameraDShowApp: Retri
    eving the driver list failed.CameraDShowApp: Selecting the camera device failed.
    CameraDShowApp: Selecting the camera device failed.CameraDShowApp: Selecting the
     camera device failed.CameraDShowApp: Selecting the camera device failed.CCaptur
    eFramework: Retrieving the still stream config failed.
    CameraDShowApp: Initializing the capture graph failed.

  • Camera driver for s110

    Can anyone tell me how to download camera driver for ideapad s110 ..thanks

    Hi
    Welcome to the community.
    As per your concern, I would suggest please visit the mentioned below web link and install the camera driver.
    http://download.lenovo.com/UserFiles/Driver/en/Downloads%20and%20Drivers/S10-2/win%207/IN1CAM10WW5.e...
    After that visit the mentioned below web link and install the camera software.
    http://download.lenovo.com/UserFiles/Driver/en/Downloads%20and%20Drivers/G550/Windows%207/IN2STW01WW...
    Afterwards, please restart the system and check whether the issue gets resolved.
    Regards,
    Sameer
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Will there be a camera driver for the Lenovo ThinkPad X220T using Windows 10 64-bit

    Will there be a camera driver for the Lenovo ThinkPad X220T using Windows 10 64-bit? Laptop Tablet Model 4294CTO

    I installed the latest Win7 and Win8 drivers and the camera appears for Skype and in Device Manager as Integrated Camera under Imaging Devices, but does not appear in Devices and Printers. There is no VEN DEV ID property for the device. Hardware IDs are:USB\VID_04F2&PID_B217&REV_8029&MI_00USB\VID_04F2&PID_B217&MI_00  

  • HP Photosmart R507 Digital Camera driver for windows7

    i want driver for HP Photosmart R507 Digital Camera  for windows7. i have dic driver only fro xp windows

    Hello jmitsis,
    Thanks for posting on the HP Forums!
    I understand you are looking for Windows 7 drivers for your camera. Unfortunately, there are only drivers for Vista and XP, as indicated here: HP Photosmart R507 Digital Camera Drivers
    You can try installing a Vista driver, and see if that works. You can also try running the software in compatibility mode. Please let me know if you have any other questions. Thanks!
    Mario
    I worked on behalf of HP.

  • U150 Video Cam Driver for Linux

    Hi,
    I'm running Ubuntu on my U150 and having some trouble getting the built-in cam to work.
    Is there any driver for this device for Linux?
    Steve

    which linux version you are using?

  • Camera driver for HP d049se

    when i open the camera in my windows 8.1 64bit hp15 d049se, its showing like enable camera in app settings... please help me solve this problem

    Hi @athulvijay194 ,
    Thank you for visiting the HP Support Forums and Welcome. I have read about your HP 15-d049se Notebook and not being able to open the Webcam or it not being enabled. Here is a document on Webcam Troubleshooting in Windows 8 .
    Here is a link on how to use the HP Support Assistant if you need it.  It has many troubleshooting assistance built in.
    You can check your device by clicking the Windows key and typing Control Panel,  then go to the Device Manager. click on the Imaging devices to expand the section. Right click HP Truevision HD and then verify that the device is enabled.
    Hope this helps you with the Webcam.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Problems to install the logitech driver for Webcam HD C 615

    I have problems with the installation of the logitech cam driver for mac. Can anyone tell me how to fix it? Thx.

    If you are using the most current Mac software that Logitech offers but still having trouble, try searching or posting in the Logitech forums.
    If all else fails, contact Logitech Support.  They should best able to help you get their non-Apple product working with your Mac system.
    Message was edited by: EZ Jim
    Mac OSX 10.10.2

  • Lenovo G40-70 camera driver problem

    I bought Lenovo G40-70 (Model name: 20369) yesterday in Hanoi, Vietnam. I ran all the drivers on the CD but there was a problem at Camera Driver. A small box appeared saying "No appropriate driver to be installed".I searched google and read all the thread about this problem but i still can't figure it out.Please help me

    Hi Justpro4896,
    Welcome to the Forums.
    As per the query we understood that you are facing issue with camera driver in your Lenovo G40-70 laptop.
    This message pops out if there is conflict in the driver, uninstall the current driver and reinstall the driver and check for the issue.
    Click here for the camera driver for windows 7.       
    Click here for the camera driver for windows 8.1,10.
    Best regards,                                                                                                                              
    Ashwin. S

  • Is it possible to have two USB drives for the IPad?  I want to bring RAW photo files from my camera, through the IPad and back to an external hard drive.  One of my cameras does not use an SD card.  How can I do this?

    Is it possible to have two USB drives for the IPad?  I want to bring RAW files from my camera through the IPad and out to an external hard drive.  One of my cameras has an SD card but the other one doesn't have a card that would fit in any of the camera devices I've seen on line.  Realted to this, I bought the IPad camera accessory.  Can I put the SD card in the device and also hook the external hard drive to the USB port of the accessory and download from the camera to the hard drive?  Can I put Lightroom or the Nikon photo editing software on the IPad?  Right now I carry a PC laptop and external hard drives with me on wildernes trips.  Internet and WiFi are not available.  Because I shoot so many photos and they're in RAW I need to download from the camera to the external drive because I run out of memory on the PC (and it has much more memory than the IPad).  I have Nikon NX software and lightroom on my PC.  I'd love to be able to reduce the weight I carry by using the IPad to edit my photos each night while on trips.  Is this possible and how would I do it?  I'd appreciate any guidance.

    No, the camera connection kit only supports the copying of photos and videos to the Photos app, it doesn't support copying content off the iPad. For your second camera instead of the SD reader part of the kit, does the iPad to camera cable not work with it for direct transfer to the iPad ?
    For Lightroom and Nikon software again no - you can only install apps that are available in the iTunes app store on your computer and the App Store app on the iPad, 'normal' PC and Mac (OS X) software are not compatible with the iPad (iOS). There are some apps that perform fairly basic editing functions that are available in the store, but nothing as sophisticated as, for example, Lightroom.

  • For those who have problems RE: My iPhone 4 on connecting to my pc shows my friends name in the DIGITAL camera Drive..It dsiplays my correct name when I`m on iTunes..PLEASE HELP ME HOW DO I CHANGE THE NAME IN THE DIGITAL CAMERA DRIVE??

    For those who have problems RE: My iPhone 4 connecting to my pc shows my friends name in the DIGITAL camera Drive..It dsiplays my correct name when I`m on iTunes..PLEASE HELP ME HOW DO I CHANGE THE NAME IN THE DIGITAL CAMERA DRIVE??
    SOLUTION:
    Iam pointing t0 windows7 os.
    1) go to control panel
    2) open hardware and sound
    3) In that open Devices and printers
    4)In that u can find Apple Iphone.
    5) now right click on this --> Hardware --> Properties --> General --> Uninstall --> ok.
    6) now unplug and plug in ur iphone again.There u go u iphone name changes to its original name.

    I am having this problem.  At first with the new iPhone 5, and then with the iPad 2.  I am not sure why this is happening. 
    My gut feeling is this is an iO6 issue and here's why -
    The problem mainly occurs with apps.  I have about 150 apps, and when I plugged in the phone, iTunes went to sync all of them.  The process would hang up after about 20 - 30 apps were loaded onto the phone. I could tell where about the process hung up because the apps on the phone showed up as "waiting".
    Then on the iPad 2 I plugged in to sync and saw there was a huge "Other" component in my storage.  It required me to restore the iPad 2 from backup.  With this restore the same issues occurred - putting the apps back on the iPad would hang up.  The videos on the iPad also got stuck - maybe after about 10 hours of videos transfered iTunes crashed.
    My solution has been to soft reset the device, restart Windows, and continue the process until it's complete.  This is remarkably inefficient and time-intensive but everything works with patience.
    I have been wondering if others have had these same problems. 

  • I need appleisightinstaller.exe to install the isight driver for Windows Vista running in Parallel Desktop 6 for Mac, but I don't have a Leopard DVD. What came with my Macbook Air was a flash stick "MacBook Air Software Reinstall Drive" only.

    I need appleisightinstaller.exe to install the isight driver for Windows Vista running in Parallel Desktop 6 for Mac, but I don't have a Leopard DVD. What came with my Macbook Air was a flash stick "MacBook Air Software Reinstall Drive" only.

    All,
    A very interesting NOTE to this thread. In order to try and get the "ignore permissions" box to show up in GET INFO (so I could execute Matt the Magician's solution to file sharing issues)-- I ran the terminal command for disabling ACLs on my internal HD / start up disk (as indicated in the linked thread to BDAqua's forum).
    Although I understand that this was useless for disabling permissions on the start up disk (as everyone here pointed out) and allowing me to see the "ignore permissions" check box - somehow it did seem to fix my file sharing problem...and that was the root problem I wanted solved in the first place! After doing the terminal command and a quick reboot, I went in and tested file sharing on the chosen directory and I can create new files or work from existing files in the directory, with both users being able to modify / and save from both machines and each machine sees the revisions and can build from them. Bottom line - I'm stoked and want to thank everyone for their help.
    The only other tweak I made was going over to my wife's machine and instead of using her log in / password, I just used my name and password to connect to my main machine that was sharing directories. Maybe that's what fixed the problem or the ACL disable but either way...I'm up and running the way I want to be.
    Hope this thread helps anyone else who has these file sharing / permissions issues with Leopard. Especially for anyone wanting to do such a simple file sharing set up between 2 computers. I wish I understood exactly which tweak fixed the problem, but at least it works the way I want now.
    So happy to be done w/this one!
    Thx everyone. Any additional input on what solved it is welcome, so my curiosity is quelled...
    TC

  • Windows 7 driver for FaceTime HD camera

    Hi,
    I have a Mid 2012 MacBook Air (13-inch) on which I'm running a Windows 7 Pro virtual machine using Oracle's VirtualBox.  That's all working fine but I need to use a webcam for a bit of software that will only run on Windows.
    I've been able to share the built-in FaceTime HD camera through to the Windows VM which detects it and tries to install the device, but Windows doesn't have the required drivers.
    I've done a few searches but keep coming across instructions for BootCamp (which I'm not using) or pages of random GoogleAds pretending to be links to drivers that dont' actually exist. 
    Does anybody know where I can pick up a compatible driver?
    Thanks,
    Joe

    Thanks, I've been checking there too... but I don't have any problem with VirtualBox. 
    My problem is that there isn't an obvious (working) driver for 64-bit Windows 7 Pro to use the FaceTime HD Camera that came built in to my MacBook Air 5.2. 
    From what I can tell, people running under Parallels have exactly the same problem.  It's an Apple/Microsoft issue, not a VBox or Parallels one.
    VBox is able to pass the camera through to the VM and Windows does detect it and attempt to install drivers, but it doesn't find any and can't complete the config. 
    Searching Windows Update for drivers gives nothing. 
    I've manually extracted and installed AppleiSightInstaller64.exe from the BootCamp update for the MacBook Air 5.2 but Windows doesn't recognise the resulting drivers as valid for this device.  Forcing the device to use them anyway gives an error:
    Again, others have reported similar with both Parallels and VBox. 

  • Driver for Facetime Camera on Thunderbolt Display - Win 7 in Bootcamp

    I have  a Thunderbolt display working just fine on a Windows 7 installation using bootcamp on my Mid 2012 Macbook Pro Retina - except the driver for the facetime camera on the display is not installed.  The facetime camera on the Macbook Pro did install.  The bootcamp driver folder on my USB stick created for the install does not seem to include a driver for this.   I have already done a bootcamp driver package reinstall to no avail.  Has anyone gotten this working?  Can you give me the driver details and how you did it if so?
    Thanks.
    greg

    Now it has gotten worse. I wish I had documented what I had done, but I think it was after I ran some addtional updates. Can't remember if it was the Office updates or the addtional Win7 updates.
    But now besides the error message when I try to open my virtual machine in Parallels (which I got both before & after running Bootcamp updates), now 2x at least it did not boot into bootcamp but instead showed that there were problems & the fix screen came up. Again.
    I did manage to run the Windows backup on my new WD Passport partitioned back up drive w about 50 GB formatted for Windows & the rest of it for Mac so I can use it w Time Machine.
    It backed up files in libaries & personal folders for all users 1.86 GB
    But I'm hesitant to go ahead & upgrade Parallels 5 to 8 w the purchased update to download & run as well as doing the upgrade Mountain Lion. It does not seem wise to install new or additional software on top of an unstable Windows/Bootcamp set up.
    So wondering my options. I'm guessing that the solution to an unstable Windows OS would be to reinstall it as a clean install. But then the normal thing to do would be to run the updates which took a long time the other day & then messed things up so the track pad wasn't tracking well. Before later causing it to crash.
    Just got word from Parallels suggesting a claen install into Bootcamp.
    But also considering just installing it as a new virtual machine in Parallels & dispensing w Bootcamp.
    I hope this makes some sense. I'm very tired but want to put these questions out there so when I get back to it, hopefully there will be some suggestions/recommendations.
    Thanks.

  • I need a webcam for a Mac Mini. Or driver for a Logitech C207 we camera

    Purchased a Mac Mini. Need a web cam. Apple doesn't sell one. Lodigtech doesn't have a driver for the C270. Can anybody help

    http://www.mac-compatible-web-cam.com/
    The C270 should work  using the drivers included in the OSX. Logotech does not have Mac drivers for that model
    http://logitech-en-amr.custhelp.com/app/answers/detail/a_id/6471/~/uvc-webcam-su pport-for-mac-os-10.4.9-and-above

Maybe you are looking for

  • Accounting Tab Blank

    Greetings!  I am running PPM 5.0 and trying to configure it for use.  When I open a project in Project Management the "Accounting" tab is blank.  We are trying to finalize the configuration for PS/FI/CO integration and feel something should be here. 

  • Output window size

    in standard report the size of report is half of the winodw. wheni sein foreground its giving in full pages but when i run on background its appearing on half of the window... wot could be the error??

  • ITunes Windows SDK IITUserPlaylist::AddFile access violation

    Hello. I am just try to write simple program for some practice. But iTunes COM for Windows SDK threw me a little surprise. I am want to create playlist and add file to it but when i call IITUserPlaylist::AddFile program crash with access violation. I

  • Load URL within a Jeditorpane

    How is it possible to load an html file in order to be presented in a jeditorpane from a URL? Thanks on advance

  • Correcting a 'Schoolboy error??'

    i have a hour worth of rushes with incorrect white balancing, does anyone have a miracle cures, weve got tungsten walls instead of white...? ive heard the 3-way correction could help me, just looking for somebody who may have tackled this type of iss