Camera not working with FaceTime

camera isn't working with FaceTime, it's frozen... But works with regular camera

Best option is to do a reset (restart) of the iPad to do this press and hold the On/Off button and the Home button, until the Apple logo appears.  It will show you the "Slide to power off" just carry on holding the two buttons down until the logo appears and then release and that should have your FaceTime working again with your cameras.

Similar Messages

  • Camera not working with Facetime under iOS7

    Hello,
    My front camera doesn't work since upgrading my iPhone 4S to iOS7.  The image is not clear (I just see my shadow)
    It was working perfectly under iOS 6.1.4
    The front camera is working with other apps like Skype and I can take picture with Camera' app.
    I have an iPad and there Facetime works correctly.
    Does anyone has the same problem ?
    Soft or hardware problem ?
    Many thanks for your help.
    Kind regards,
    Sébastien

    I have the same issue, and when i try to switch back to my other camera, it freezes the screen and I have to force shut down the camera app.
    It all worked fine before the install of ios 7
    I have tried reinstalling the software by restoring the phone, but its just the same.

  • TS4185 Blackmagic ultrastudio not working with facetime

    Blackmagic ultrastudio not working with facetime, however the audio of the ultrastudio is recognised and can be selected in the source section what can i do to get facetime recognise it? also wirecast virtual camera is detected and recognised by facetime but doesnot work anyway to fix that?

    Best option is to do a reset (restart) of the iPad to do this press and hold the On/Off button and the Home button, until the Apple logo appears.  It will show you the "Slide to power off" just carry on holding the two buttons down until the logo appears and then release and that should have your FaceTime working again with your cameras.

  • After upgrading to Lion internal mic does not work with Facetime

    After upgrading to Lion internal mic does not work with Facetime.  The mic is picking up sound as noted in System Prefs.  This was working just fine before the updgrade.  Facetime works OK on my iPod. 

    you have in french a tutorial to recreate your partition here
    Rebuild partition with Recovery HD lion after upgrade to 10.7.2
    i tested, it's work !
    For your wifi problem:
    Try to change your setup of wifi, look this table given by apple:
    I changed my wifi setup wep to wpa and it's work !

  • Old macbook pro3,1 (2.4 GHz Intel Core Duo) camera not working with Mavericks

    I have an old macbook pro3,1 (2.4 GHz Intel Core Duo, I think 2007), builtin camera not working and I think it is related to mavericks update.
    Anyone had the same problem, and if yes what is the solusion?

    Try these in order testing your system after each to see if it's back to normal:
    1. a. Resetting your Mac's PRAM and NVRAM
        b. Intel-based Macs: Resetting the System Management Controller (SMC)
    2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
         Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
         COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
         computer and after the chime press and hold down the OPTION key until the boot manager
         screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
         Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).
    4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).

  • My camera not working with tango

    My camera not working on Tango since i update my iphone 5s to IOS 8

    Delete and reinstall the app.

  • FaceTime camera not working with Skype

    Recently I've had trouble with my Facetime/iSight camera not playing nice wth Skype.
    The camera works fine with Photobooth and Facetime, but if I try a video call in Skype, I just get the spinning graphic. Doesn't matter how strong the connection is. Until recently, I could get Skype to recognise the camera in the video preferences tab, but now nothing, just blank.
    I've tried installing a plugin from Skype that's meant to fix the problem, but still no luck.
    Any ideas appreciated

    For Skype specific problems like this, search or post in Skype's dedicated forum.
    Also, your OS X Mountain Lion (10.8.2) is out of date. Restart Mac, repair disk permissions, and apply the OS X Mountain Lion Update v10.8.5 (Combo).  Repair permissions again immediately following the restart that completes the Combo install.

  • HT3957 What cam camera will work with FaceTime?

    I am working with a video display with a Mac Mini and would like to add a cam camera for Facetime. Looking for a "best fit" suggestion(s)?

    I picked up a Logitech c615 a week ago.....works perfectly with FaceTime.....you do not need to install Logitech's software.....just plug it in and use it......

  • ISight Camera not working with Skype

    Hi,
    2 days ago my kids were skyping and everything was fine, then I turned off my iMac and the next day Skype wouldn't use my iSight Camera. In the settings it shows that it is using the iSight Camera but not picture! I made an update from skype but it didnt help. I restarted my computer, reinstalled skype nothing.
    I am not a big pro with computers, so if you have an explanation, PLEASE be detailed in your explanation.
    Thanks
    Lucy

    I know this is an older thread BUT I've been dealing with this issue for the past four days and this is what I found... (perhaps if it helps another person....)
    Assuming you've already checked while on a Skype video call that your camera isn't turned off...
    FIRSTLY
    Open Skype Preferences to verify your settings.
    (prob in your downloads, applications folder or on your desktop)
    Then at the top your screen, next to the Apple Icon you should see Skype:
    Select Skype, then scroll down to Preferences.  Verify settings.
    (Mine, for example, under the "Calls" Tab was set to autoanswer so I can check on
    my dogs while away and tell them to get off the couch!)
    SECONDLY
    Make sure another apple app isn't hijacking your camera.
    Open Finder, Devices, Applications, then look for IChat
    Once open, Select iChat and scroll down to preferences.
    (For my settings, I don't use IChat SO I changed the "default IM application" to Skype,
    under General settings tab.)
    Select the green Audio/Video Tab
    and uncheck "Open IChat when external camera is on"
    THIRDLY
    I verified that all other Apps using the camera weren't open.  My insight camera worked
    when I opened Photobooth,  IChat, Facetime and ICamSource (a monitoring program)
    - just didn't work with Skype!
    From Desktop, go to Apple Icon, select "Force Quit Finder", then scroll down and
    close everything that uses the camera. 
    FINALLY
    From Desktop, go to Apple Icon and select Restart (pic same as above).
    Upon restarting, once the screen blanks out hold down the following keys all at once:
    Option, Command and P and R keys.
    For me, I heard the computer "restart song" chime twice before letting go.
    (PRAM and NVRAM settings)
    http://http://support.apple.com/kb/ht1379
    I tried a Skype video call from an Iphone to Mac Desktop and it went through just fine!

  • Camera not working with msn

    Hi all I just bought this MacBook Pro 2 weeks ago, the built in camera works fine with photobooth or facetime, but when I try using it on Skype or MSN, it does not work.  I cannot send myself over! I can see my friends but they can't see me.  -_- help!

    I have the same issue, and when i try to switch back to my other camera, it freezes the screen and I have to force shut down the camera app.
    It all worked fine before the install of ios 7
    I have tried reinstalling the software by restoring the phone, but its just the same.

  • Built in isight camera not working with flash

    My built in isight camera on my macbook works just fine in photobooth and in skype or ichat.. but just in the past week or so, it will not work when im on websites that use flash. I've seen some threads that say that I need to go into settings and make sure that the camera chosen is the USB. When i go into flash settings, the only options are Google1, Google2, or Built in isight. It doesn't work with any of them. Does anyone have any idea how I can make it work again?

    zeppelinfan1234 wrote:
    I don't have google add ons. I followed the path but i have no Google folder in Application Support. Any other suggestions?
    Your problem is not the same as that posted by the OP, and your system info shows you using Mac OS X (10.5.6).
    For your symptoms with this system, I suggest you do the following:
    (1) Apply the 10.5.8 Combo Update using the following process:
      • Backup your Mac and turn off Time Machine
      • Disconnect peripherals and restart Mac
      • Use Disk Utility to repair permissions
      • Download and install
       http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate
      • Repair permissions again immediately following the restart that finishes the update.
      • Test whether Flash works for you now.
     (• Turn Time Machine on later when you are satisfied that the update worked.)
    (2) After applying the 10.5.8 Combo, if you are still having problems, download and install the latest Flash player compatible with your system:
      http://get.adobe.com/flashplayer/otherversions/
    Also check any other third-party browser plugins or other add ons. Apply all available updates and uninstall any third-party items that are known to be incompatible with your system.
    Message was edited by: EZ Jim
    Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.5); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.5)
    LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod touch 4.1

  • Macbook Air camera not working with Jabber and Skype

    New Macbook Air (2013) and the camera does not recognize Skype or Jabber (Cisco product). Unbelievable that Apple does this but any suggestions on how to fix this issue?

    See this thread:
    https://discussions.apple.com/thread/5306216?tstart=0
    FIX:
    1. You need Time Machine
    2. Go to folder /Library/CoreMediaIO/Plug-Ins/DAL/
    3. Copy AppleCamera.plugin to good place (usb memory stick is the best place).
    4. Go to Time machine in date that skype work fine.
    5. Change AppleCamera.plugin with file from Time Machine
    6. Restart system, Now skype need to work with camera.

  • External iSight cam not working with iChat

    I've got an external iSight cam that was working fine in 10.5.8 with iChat - I'm using 10.6.1 now. Now when I open iChat, the camera stays off (no green light) and iChat video preview says that another application is using the camera so it's not available, which of course, is not true.
    I've tried everything I know, but can't get it to work. The camera works with Skype, so I know it's functioning properly.
    When I checked the Connection Doctor, under Network, it says that there's something in my network setup that is preventing video chats, but I haven't changed anything since upgrading to SL. I have a direct ethernet cable to my DSL modem/router - Covad. My wife's iChat works fine with her new LogiTech camera, and she's on the same home network/router.
    Message was edited by: Macaroni108

    Opps,
    My head read that as MacBook Pro. Sorry.
    Try Restarting the computer whilst Holding done the Apple (CMD)+ALT (OPTION)PR Keys until you have heard three start up Bongs.
    Chax is an iChat Add-on.
    Different version have done different things in the different iChat Versions.
    There is only a Alpha test version of the one for Snow Leopard.
    The iChat 4 version does not work in Snow Leopard/iChat 5 and that was why I was asking.
    7:43 PM Monday; September 14, 2009
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

  • External iSight mic not working with facetime.  Snow Leopard, mac mini w/ firewire v1.0.2, 800/400 firewire adapter

    External iSight camera connected via Firewire adapter 800/400 to a Mac Mini running Snow Leopard - a visual signal comes up for iChat and FaceTime, only sometimes does a video signal comes up for PhotoBooth, always no sound for any of the applications.  System Preferences "Sound" shows "Input Level" set around 75%, however only periodically do I see blue bar move, almost like a short in the cable, but the adapter is new.  Firewire firmware is v1.0.2.  Tried to use firewire updater to get 1.0.3, but updater won't update for Snow Leopard.  For being advertized as the world's most advanced OS, seems like Apple OS could at least work with Apple External iSight camera !  Any help much appreciated on fixing the missing sound.

    This means that my Firewire 400 ports on the display are no longer supported by the computer?
    They need a FireWire connection to the computer. With older computers, the FireWire cable from the display would plug in to a computer FW400 port to provide the connection. With FW800 only computers, you need the adapter.

  • Apple ID not working with facetime and messages what to do

    I'm not sure when this issue occurred but I cannt use my facetime and messages at all. My apple ID works with everything else but facetime, messages and oh yeah icloud . I have changed my ID like three times and I also looked at my DSM but nothing. I'm frustrated because I live in Trinidad where there is no apple store to correct this issue. Please help someone!!!!!

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
     Cheers, Tom

Maybe you are looking for

  • After restore from Time Machine

    After I restore my system from time machine, it tells me to restart the computer, and so I do, then it continues to ask me to do so and thats all I get unless I press the option key, then I can only use the installation disk. What is the problem?

  • Report on Parked document status

    Hello Experts, Is there a way to pull the report on status of a Parked document. Also, can we track a deleted parked document? Please advise! Regards, N All answers will be duly rewarded.

  • Error when create index

    Hi, Platform Tru64 BD 8.1.7. When i create some index for intermedia search, i get some errors: CREATE TABLE DOCUMENTO ( ID NUMBER (15) NOT NULL, NOME VARCHAR2 (100) NOT NULL, DESCRICAO VARCHAR2 (255), FORMATO VARCHAR2 (128), AUTOR VARCHAR2 (100), RE

  • Sharepoint webservice call - Invalid Response Code: (401) Unauthorized.

    Hello, when I try to call a webservice provided by Sharepoint Services 3.0 I always get the following: InvalidResponseCodeException: Invalid Response Code: (401) Unauthorized. The requested URL was:"http://[myserver]/_vti_bin/dws.asmx?WSDL, used user

  • How do I set file association in PCMANFM?

    Sorry, I thought PCMANFM was messing my file associations but it was the upgrade to shared-mime-info 0.4. I'll repost on a different  forum. Sorry again. Last edited by benton (2008-06-25 03:42:40)