Can a button be placed and selected on a video menu?

I'd like to create a main menu from a short video loop and place one or two buttons at certain locations. Can this be done? The video would stop and then connect to the button's track, right? Would I be able to have sound attached to the button's click? Should I make a duplicate video menu with the (linked-to) sound?

You can set up a motion menu and set a loop point (or you can add buttons to movie tracks) and the buttons can be placed on the menu. When the video reaches the end of the motion it will jump back to the loop point.
Usually a button being pressed will pause a motion menu (sometimes more obivious than others based on the player) and then jumps to the track. You can find a workaround to fake a button click sound via transitions (but most do not use that in DVDs) but if you are thinking something akin to mouseDown events in Director or Flash, that is not available as a command

Similar Messages

Why can't i open iTunes and App Store in Settings Menu on iPad Mini IOS 7.1.2?

Why can't I open i Tunes and App Store in Settings Menu on iPad Mini IOS 7.1.2?

What happens when you try?
Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds).
No data will be lost.

How can I download FLV completely and only then play video on Flash?

What is a proper way to download video first and then play it in Flash? NetStream seems to allow me only to stream video - I can't find a way to download file completely first. Is there some other file for this?
It looks like I can download the file using URLLoader, then do NetStream.play(null) and then append bytes from URLLoader using NetStream.appendBytes(...), but I get: "SecurityError: Error #2123: Security sandbox violation: BitmapData.draw: file:///Users/Paulius/Build.swf cannot access unknown URL. No policy files granted access." Is there a workaround?

No, I don't think that's the issue. I have no problems downloading the video using URLLoader, which does the crossdomain check. Problem is when I do this:
stream = new NetStream(connection);
// ... snip ...
video = new Video();
video.attachNetStream(stream);
addChild(video);
stream.play(null);
stream.appendBytes(videoByteArray as ByteArray); // videoByteArray is taken from URLLoader downloaded content, i.e. the video
As you can see NetStream doesn't know anything about the video, it doesn't know anything about the server, so it can not take something from crossdomain.xml.
As far as I've read, it's imposible to do what I'm doing: simply Flash security won't allow to take contents of anonymous stream (i.e. stream started with play(null)).
So my question is: how do I download video first and then play (instead of streaming) it in some other way? I couldn't find such API on NetStream itself.

Can I click on "bookmarks" and have the drop down menu display ONLY the file imported from Safari?

I am trying to achieve a one click drop down menu without side selection for "Safari". Possibly I need to drag bookmarks and folders from the "Safari" folder into the "unsupported " folder, but when I tried this it doubled everything I drug in.

I did find that I could move bookmarks and folders out of the "imported from Safari" folder onto the "unsorted bookmarks" folder. Removed the Safari folder and made sure the "bookmarks menu" was empty, and then closed show all bookmarks. Hoping that when I opened Bookmarks from the very top line of Apple menu items, the only list that would pop down would be the one that I just constructed in "unsorted bookmarks". But alas, what pops down is no visible bookmarks. You have to slide down to "unsorted" which pops open a window offset to the right with what I really want to see, the list of bookmarks that I assembled in Unsorted.

SSRS 2008, can I use exec sp and Select combo in dataset query pane for DataSet

Hi, I'm trying to use this combo for my dataset: i.e. call sp and then use table resulting from this sp, and it give me an error
<procedure or function has too many arguments specified> while generating report on Preview, but runs OK from query designer, I'm totaly lost.
Can it be done??
create table #temp (c1....c2)
insert #temp
exec sp_1000_Get_Mir
select c1, c2 from #temp

You need to use it like below if you want to select subset of columns from sp output
http://beyondrelational.com/modules/2/blogs/70/posts/10812/select-columns-from-exec-procedurename-is-this-possible.aspx
But I would still recommend using a wrapper procedure inside it create a temp table with structure some as your sp output and then select required columns from it
ie like below
CREATE PROC WrapperProc
AS
create table #temp (c1....c2)
insert #temp
exec sp_1000_Get_Mir
select c1, c2 from #temp
go
Then call the WrapperProc from your report
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

HT2473 How can I get the date and time back on the menu bar?

Several items disappeared from my menu bar for no reason known to me. I miss the date and time and want it back. Please . I have gone to System Preferences and clicked "date and Time" but it will not allow me to check anything on the page even though there is a box "Show date and time in Menu bar".
What should be my next move?

One more thing might help us
In the Finder > Date & Time Preferences > Take a Full ScreenShot of the entire display showing the "absence" of the check box (or whatever) to Show in Menu Bar
⌘ Command + ⇧ Shift > Press ' 3 ' > release all three
Use the camera tool > locate the screenshot in the Desktop (not sure whether it will say "Picture 1.png" or have a TimeDateStamp as a title.
ÇÇÇ

Crop mark issue when placing and PDF in Indesign

I've just had this strange issue that I can't figure out and I'm not sure if anyone else has had it as well.
I exported a PDF through InDesign with crop marks. I then placed the PDF in Indesign and for some reason the bleed and the crop marks don't
show up! I've never had this issue with Indesign before.
Is it even InDesign, or is it the PDF itself?

Select show options when placing and select the appropriate crop to choice.
Bob

Latest iTunes, can't figure out how to select a movie to transfer to iPad

From older versions of iTunes I used to select the device>movies and select which movies/videos/playlists/etc from my library I wanted transferred, then sync.
Now going to movies only shows which movies are currently on the iPad; I can't see how to remove or add to that list.
I'm leaving on a trip tomorrow and planned to copy over a season of a TV show or a movie or two, but now I can't figure out how.
Need answer quickly if possible so I can sync overnight. Thanks

Transfer Manually
Step 1
Connect your iPad to your computer. If you have Wi-Fi synchronization enabled, your iPad will connect to your computer automatically, provided the computer and iPad are sharing the same Wi-Fi network. If you do not have Wi-Fi synchronization enabled, connect your iPad to your computer using the USB dock cable that came with the device.
Step 2
Launch the iTunes application on your computer and click your iPad under the Devices heading.
Related Reading: tour
Step 3
Click the “Summary” tab in the main panel of iTunes.
Step 4
Click the check box labeled “Manually manage music and videos.”
Step 5
Click the “Apply” button.
Step 6
Navigate to the Movies or TV Shows section of your iTunes Library.
Step 7
Drag and drop your videos onto your iPad under the Devices heading to transfer them.
Transfer Automatically
Step 1
Connect your iPad to your computer and launch the iTunes application if it does not launch automatically.
Step 2
Click your iPad under the Devices heading.
Step 3
Click the “Movies” tab to transfer movies onto your iPad. On the Movies screen, click the “Sync Movies” check box.
Click the “Automatically include” check box. Click the “All” pull-down menu and select the number of movies you want to transfer onto your iPad. If you want to select movies individually, leave the “Automatically include” check box unchecked and instead check the box next to each movie you want to transfer.
Click the “Apply” button to transfer your videos.
Step 4
Click the “TV Shows” tab to transfer TV shows onto your iPad. On the TV Shows screen, click the “Sync TV Shows” check box.
Click the “Automatically include” check box and select the number of episodes to include on the pull-down menu. Click the “Selected shows” pull-down menu and click the TV shows you want to include in your automatic transfer.
To select shows and episodes individually, leave the “Automatically include” check box unchecked. Scroll through the list of shows under the Shows heading and click the check box next to the show you want to transfer onto your iPad. Click the season containing the episode or episodes you want to transfer, then click the check box next to each episode you want to transfer.
Click the “Apply” button to transfer your selected videos to your iPad.
(source: MuaChung)

Insert and select in one statement

using MS Sql server and VB i can execute two queries Insert and select in one statement e.g. (insert into (....) values (...) Select @@Identity).
how can i do the same thing using Oracle and VB. ???
It gives error. here's what i want to do.
(insert into table1 (...) values (...) Select table1_sequence.currval from dual )
Khurram

Here's how you can achieve the same Oracle :-
Test Db>desc tmp1;
Name Null? Type
EMP_NO VARCHAR2(10)
EID NUMBER
Test Db>insert into tmp1 (emp_no, eid)
2 select '123', 1
3 from dual;
1 row created.
Shailender Mehta

Review period and Selection period in Enterprise Compensation Management

Dear all,
Anybody can explain about review period and selection period???
Theory says u2026
Review period
The period when manager can plan and submit recommendations through MSS
Selection period
The period which system retrieves the set of objects (Org units, positions and employees) for compensation on portal.
But I am bit confused with thisu2026 when this review will happen? In the beginning?
Say example
If itu2019s a merit increment and 01.01.2011-31.12.2011 is the valuation periodu2026 and we will give the increment in effective 01.01.2012 .Then when it be will the review period and when it will be the selection period?
Anybody can explain with examples plsu2026.
Thanks and Regards
Richard

Hi Richard,
You supplied the correct definitions, but your explanation is not correct.
The Review Period is that period of time the manager can access the system to enter the recommendation for a pay change. In your example it might be 12/15 to 12/31. Only during this period will the review be available for entry. The 1/1 effective date is set in the Item attributes.
The Selection Period indicates for which employees the manager can make recommendations. For example, if a person is transferred on December 20th in the above scenario - you would want the first manager to still create the recommendation and the individual not to appear for the new manager. Thus, you would put 12/15 as the beginning and ending date for the Selection period. Each manager would then see his/her direct reports as of that date in the recommendation area. If you put 1/1/ to 12/31 in this field, any manager of the individual during the year could see and make entries in the recommendation area for the employee.
Hope these examples help.
Paul

BI PUBLISHER : not able to select 'all' from the menu as parameter

Hi ,
I have created a report using a SQL query . i created a list of values using the following sql query :
select EDM_TRD_HDR.TRD_ID as TRD_ID
from MUREXEDM.EDM_TRD_HDR
and selected this in the menu settings in parameters .
i checked on 'can select all ' option and also on 'NULL Values passed' button.
On clicking view , i am able to see the data for the default valu of the parameter. however, when i select 'all ' from the menu , i am just getting the column headings and no data .
please reply if you are aware of this problem.
Also let me know wether we can create a view selector for a BI publisher report and are there any functionalities which can be implemented in answers and not in the publisher.

You've selected 'null value passed' so you need to write the driving query in your data model in a way that will show all values when the parameter is null:
eg
select *
from
your_table
where
(:p_paramter is null or your_column = :p_parameter)
and ...
(assuming not multi select).
With view selector, you can create conditional regions so could mimic something like that. With regards to features they are completely different products - so almost everything.
Regards,
Robert

Pros and cons for posing video to youtube for use in iWeb

Hello
Can someone explain the pros and cons of posting video to YouTube for use in an iWeb website instead of iDisk?
Thanks
Carl

Carl ~ Some of the following points have already been mentioned above, but anyway...
Pros for posting videos to YouTube are:
Viewers of your video wouldn't be using up your limited .Mac data transfer allowance.
Once your site is published, if subsequently you have to do a +Publish All+ from iWeb, you wouldn't be uploading your video yet again to .Mac ~ saving time and usage of your limited .Mac data transfer allowance.
YouTube videos have a wide audience and popular features such as ratings, playlists, comments, etc.
Cons for posting videos to YouTube are:
Limitations on size and quality of videos and their unappealing presentation style. For example, compare YouTube's presentation style and limited size options with that of a +.Mac Web Gallery+:
http://gallery.mac.com/emily_parker#100471
Perhaps a compromise would be to post your videos to YouTube (for the publicity) and link from your iWeb site to a +.Mac Web Gallery+ (for its elegance and avoidance of iWeb re-publishing it.)

The back/forward buttons on the tool bar only go one page at a time. I used to be able to click a drop-down and select how far back/forward I wanted to go. How can I get that back

I can only navigate back/forward one page at a time. The drop down box that used to allow me to see the recent pages and select the page I wanted to go to was immediately to the right of the "forward" button. I can right click over the forward/back buttons and get the dropdown list of recent sites.

Use right-click on the back/forward buttons to bring up the context menu, the drop down was never needed, and I had suppressed it for a long time to save space.
that is item #5 in the following, you might want to check out other items there.
You can make '''Firefox 6.0.1''' look like Firefox 3.6.*, see numbered '''items 1-10''' in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 thru 8.0, look like 3.6)]. ''Whether or not you make changes, you should be aware of what has changed and what you have to do to use changed or missing features.''
* http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface
There is a lot more beyond those first 10 steps listed, if you want to make Firefox more functional.
<br><small>Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.</small>

IPod nano 3rd gen. Apple logo remains on screen and iTunes doesn't recognise it's plugged in, I can't even turn it off. I've tried to get to disc menu but when I hold the 'menu and select button' it reboots it doesn't recognise the select and play button

iPod nano 3rd gen. Apple logo remains on screen and iTunes doesn't recognise it's plugged in, I can't even turn it off. I've tried to get to disc menu but when I hold the 'menu and select button' it reboots and then doesn't recognise the select and play button to show the tick. I'm helpless.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

HT5361 When inserting pictures in a new mail message using the " photo browser" button I can view and select photos but the " choose " button is gone. What have I done wrong?

When inserting pictures in a new mail message using the " photo browser" button I can view and select photos but the " choose " button is gone. What have I done wrong?

Hi Liz,
Sorry to hear you are having a similar problem. Last night I went to the tool bar at the top of iphoto, clicked on "File", then clicked "Browse Backups" in the drop down menu.    I have an external hard drive that is set up to Time Machine.   The Browse Backups opened the iphoto pages in the Time Machine. I selected a date one day ahead of the day I performed the now infamous update, and it showed my iphoto library as it had existed that day.   I then clicked "Restore Library" at the bottom right corner of the Time Machine screen.   Roughly 2 hours later my iphoto was back to normal.   When I opened iphoto there was a message saying I need to upgrade my program to be compatible with the new version of iphoto(version 9.2.1). I clicked "Upgrade" and within seconds it had done whatever upgrading it needed to do.
The only glitch in the restoration was that it restored the library as it appeared last week, so I no longer had photos I had imported this past weekend.   I simply went back to the Browse Backups in the drop down menu, when Time Machine opened I selected the page showing my pictures from this weekend and again said to Restore Library.   Roughly 45 minutes later the library was restored including the most recent photos.
I am now a happy camper.
I don't know if any of this will be of help to you because your email says you are having trouble with photos imported after the upgrade was performed.   Have you had any pop up notices when you first open iphoto, that tell you you need an upgrade to be compatible with the new iphoto?     If so have you clicked "upgrade"?
Good luck Liz, if you have Time Machine running as a back up to your library, maybe you wil be able to get help there, by following my instructions above.   Otherwise,   good luck with your investigations.   I'd be interested in hearing how you make out.
Karen

Can a button be placed and selected on a video menu?

Similar Messages

Maybe you are looking for