Can a host help out Padwil?

Confused newbie doesn't understand about his email subscriptions. http://forums.adobe.com/thread/447467?tstart=0

Hi demetracaston,
Not to defend the poster (that I think you are referring to) but just wanted to add that sometimes in the forums there are users/posters that post in a style that is "short". By that I mean their "style" of posting can be interpreted as being sarcastic or somewhat rude if read the wrong way.
Not sure I am explaining that well for you but just wanted to let you know that you should always take discussion forums with a "grain of salt" so to speak. The printed word is a strange thing sometimes. One persons style of writing is not another's cup of tea.
When I first began posting here in the forums I remember being very offended by a couple of long time posters not realizing that they were posting in a style that was just very short and to the point. They just were not very versed in social etiquette nor cared to be but rather just shot off quick responses to someone's topic, I think, not realizing how it might "read" to the original poster.
I had always been somewhat thin skinned about such things but soon learned to just let it go.....and found that in the end it didn't make much difference to the big picture. The vast majority of users here bend over backwards to be kind and polite so I think the contrast can make those few users posting in a short matter of fact style seem rude or condescending in contrast.
Please don't think I am defending the user you refer too here. And remember there are those that post to "bait" a user into an argument or flame so it is always best to report the offense here in the Feedback forum for consideration by a moderator rather than to reply in the topic to the offender and give them further opportunity to be rude.
hope you continue to participate and not be "put off" by that sort of thing....it is really a part of all public forums as you can imagine. I think these forums do a very good job of keeping it to a minimum though.
best regards,
littleshoulders

Similar Messages

  • Can After Effects help out Premiere

    Dear,
    I'm using Premiere CS3. I'm editing on AspectHD, and I'd like to have my co-editor working on his machine with DV version of the footage.
    To have him have exactly what I've got so far, I went this way:
    - saved a copy of my project file
    - offlined all video clips it copy and kept audio files online (to avoid
    having to reconnect them, by having my co-editor have them in the same
    drive path and directory as I do so they reconnect automatically)
    - I imported CFHD project in a brand new DV project (so that my co-editor
    can work in it and have proper specs)
    So now I have an offline DV version of my project file with audio online, but when I try to reconnect medias with the DV clips, I need to reconnect them one by one; even more, I need to select them 2 times each before Premiere recognizes and accepts them as the proper media. (that is normal software workflow according to ADOBE support "except for the double selection I have to make")
    When I just Make Offline and Reconnect Medias in my project file and keep the HD media, I just need to select and tie one file in each folder that hold clips and Premiere does the rest, but now it won't do it for this particular project.
    I talked with ADOBE tech support and the guy told me it was how Premiere works, but couldn't help me out as to if AE could help me help PREMIERE reconnect all my file in batch instead of spending 1-2 days doing so.
    Anyone knows if by importing my project file in AE I could batch reconnect medias ?
    Thank you.

    Thank you Howard, didn't know about this.
    But, still my co-editor doesn't have the Hard Drive space to have the files copied (1.4GB) and I don't have the money to buy it for him.
    So I'd rather find a way to reconnect DV media to replace CFHD ones.
    I posted on After Effects forum and it seems the program will respond as Premiere does. What about BRIDGE, is is there a way to reconnect media via it ?
    This is like the basis of offline/online editing I can't believe that ADOBE technician haven't included something in the Creative Suite to do this !!?

  • Can a host help me?

    I am very new to apple and the apple discussion board but with that being stated, I am feeling my way around and I enjoy reading and replying to the apple discussion boards. Today I posted a question that may or may not have been apple related but because I purchased a macbook recently, I thought I would attempt to ask the question on the discussion board and I was met with sarcasm. I know there are users who are more advanced than others but it does not give anyone the right to be sarcastic or to belittle those who aren't as advanced or familiar with how the discussion boards work. With that being stated, here is the link to my discussion: http://discussions.apple.com/message.jspa?messageID=8698018
    I have also clicked on this person's profile and I have read some of their other comments and this person is quite condescending towards those who I would have to assume they feel is beneath them with regards to apple products.
    The only reason I've taken time out of my day and have decided to bother you lovely moderators is because I don't want to be attacked whenever I post something. Regardless of how someone else may feel about my post, I have a right to ask a question and get a resolution.
    Thank you for any assistance that may be provided. Except for this small fraction, I love Apple and my macbook.

    Hi demetracaston,
    Not to defend the poster (that I think you are referring to) but just wanted to add that sometimes in the forums there are users/posters that post in a style that is "short". By that I mean their "style" of posting can be interpreted as being sarcastic or somewhat rude if read the wrong way.
    Not sure I am explaining that well for you but just wanted to let you know that you should always take discussion forums with a "grain of salt" so to speak. The printed word is a strange thing sometimes. One persons style of writing is not another's cup of tea.
    When I first began posting here in the forums I remember being very offended by a couple of long time posters not realizing that they were posting in a style that was just very short and to the point. They just were not very versed in social etiquette nor cared to be but rather just shot off quick responses to someone's topic, I think, not realizing how it might "read" to the original poster.
    I had always been somewhat thin skinned about such things but soon learned to just let it go.....and found that in the end it didn't make much difference to the big picture. The vast majority of users here bend over backwards to be kind and polite so I think the contrast can make those few users posting in a short matter of fact style seem rude or condescending in contrast.
    Please don't think I am defending the user you refer too here. And remember there are those that post to "bait" a user into an argument or flame so it is always best to report the offense here in the Feedback forum for consideration by a moderator rather than to reply in the topic to the offender and give them further opportunity to be rude.
    hope you continue to participate and not be "put off" by that sort of thing....it is really a part of all public forums as you can imagine. I think these forums do a very good job of keeping it to a minimum though.
    best regards,
    littleshoulders

  • Can a host help with an edit?

    Bad habits-inadvertently include personal information on the last line of my first (12:34pm 11.18.07) reply to this post:
    http://discussions.apple.com/thread.jspa?messageID=5893511#5893511
    Could someone PLEASE remove the single word before it's indexed by a crawler?
    Thanks in advance.

    I think Roam is referring to his real first name, which he used as a signature in the last line of his first post in that thread...
    Roam, I reported the post to the Hosts mentioning that you've requested your name be removed. That report and/or your post here will probably get their attention.

  • FaceTime and iMessages have stopped working since i updated to 7.0.3, saying there is a network error and to try again later. Have tried reinstalling Find my iPhone to see if it works. It doesn't for me. Can u please help???

    FaceTime and iMessages have stopped working since i updated to 7.0.3, saying there is a network error and to try again later. Have tried reinstalling Find my iPhone to see if it works. It doesn't for me. The message says "FaceTime (iMessage) Activation: Could not sign in. Please check your network connection and try again". My network is perfectly alright as I keep buying on the App Store. can u please help out???

    (A) Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.
    (B) Reset all settings
    Settings>General>Reset>Reset all settings
    Note: Data will not be affected but settings will be reset.

  • Urgent - I have written select query between loop and endloop, Ple help out

    Can any one help out me on this select query. I have written select query between loop and endloop. When I execute the program it will take too much time in this query. Please help me out. Its very urgent.
    LOOP AT l_i_invoices ASSIGNING <l_invoices>.
          CLEAR alv_wa.
          alv_wa-bukrs = <l_invoices>-bukrs.
          alv_wa-gsber = <l_invoices>-gsber.
          CLEAR l_instid.
          CONCATENATE <l_invoices>-belnr <l_invoices>-gjahr INTO l_instid.
          SELECT top_wi_id FROM sww_wi2obj INTO TABLE l_i_swwwihead
                  WHERE catid   = c_catid_business_object
                    AND instid  = l_instid
                    AND typeid  = c_typeid_invoice
                    AND removed = space
                    AND ( wi_rh_task = c_task_buyer_message
                       OR wi_rh_task = c_task_buyer_message2 ).
          IF sy-subrc = 0.
            <l_invoices>-flag = 'X'.
          ELSE.
            <l_invoices>-flag = ' '.
          ENDIF.
          MODIFY l_i_invoices FROM <l_invoices> TRANSPORTING flag
                                WHERE belnr = <l_invoices>-belnr
                                   AND gjahr = <l_invoices>-gjahr.
          APPEND alv_wa TO i_alv.
        ENDLOOP.
    Thanks in advance.

    Here is a way to solve this problem.
    Choose somewhere before this loop processing to use that select. Therefore, you'll need use FOR ALL ENTRIES <that_loop_table> clause, and in the WHERE condition you need to specify that same fields.
    This way, you will have an internal table with all data you'll need to check.
    Then, inside your loop statement, use the READ TABLE command with the clause WITH KEY field = value, to read that record and use the value found.
    Like this sample:
      SELECT bukrs lifnr umsks umskz augdt augbl zuonr gjahr belnr buzei
             waers xblnr blart gsber ebeln zfbdt zbd1t zlsch
      INTO TABLE tg_bsak
      FROM bsak
      FOR ALL ENTRIES IN tl_bkpf_sel
      WHERE bukrs EQ tl_bkpf_sel-bukrs AND
            lifnr IN s_lifnr AND
            augbl EQ tl_bkpf_sel-belnr.
    LOOP AT tg_bseg INTO wa_bseg.
        READ TABLE tg_bsak INTO wa_bsak WITH KEY bukrs = wa_bseg-bukrs
                                                 gjahr = wa_bseg-gjahr
                                                 belnr = wa_bseg-belnr
                                                 BINARY SEARCH.
    if sy-subrc = 0.
    * do something
    endif.
    ENDLOOP.

  • I jailbroke my ipod and its in recovery mode i cant take it out of it and i cant restore becasue i changes host to sariks sever i need help can any one help me

    i cant take it out of it and i cant restore becasue i changes host to sariks sever i need help can any one help me please please i just got my ipod i realy need help

    Sorry, due to the Terms of Use, problems with jailbroken devices can't be discussed here.

  • HT1688 Can you please help me. I purchased the new Apple I 4s phone from AT&T. I bought it out right. NO CONTRACT!! I paid almost $1000.00 for it. I then, had it enrolled it in my company's  ATT service plan. They paid the bill for my service. Since, I ha

    Can you please help me. I purchased the new Apple I 4s phone from AT&amp;T. I bought it out right. NO CONTRACT!! I paid almost $1000.00 for it. I then, had it enrolled it in my company's  ATT service plan. They paid the bill for my service. Since, I have left the company. I have retained, and assumed financial responsibility for the phone, and the phone number with AT&amp;T. The same day I assumed ifinancial responsibility, I had the phone number ported to a new service provider. ( Straight Talk ) After doing so, my phone worked fine. (as far as cellular service) NO DATA Service !!!! I have been on the phone with AT&amp;T, Straight Talk, and Apple, FOR HOURS over TWO days!!! Trying  to get this problem resolved. All I need to do, is change my APN settings (access point name ) settings. Its  my phone!!! Why does any body have this APN menu locked from me??? I've been on the phone for two days between, AT&amp;T, Straight Talk, and Apple products technical support teams. Everybody points the finger at the next guy!! What can I do to get the phone, that I paid for, work  for more than just a phone, and a paper weigh?
    PLEASE HELP ME!!!!!
    Jason
    Sent from my iPhone
    <Email Edited by Host>

    Wow... you seriously over paid for an iPhone.
    That probably explains why you have/had no clue you were purchasing a locked device and think it's an Apple problem to get it unlocked.

  • HT201263 When my ipod touch is in recovery mode, when i try to restore it, the itunes page says the website has timed out so it won't recover. Can anyone please help me?

    When my ipod touch is in recovery mode (when I try to re-store it) the itunes page sayes the website has been timed out and so it won't re-store. There is a limited time, whilst restoring the ipod, it lasts for approx 5 mins, then asks to start again all over again. Can anyone please help me?

    This device is not eligible for the requested build (Also sometimes displayed as an "error 3194")
    Update to the latest version of iTunes. Mac OS X 10.5.8 (Leopard) users may need to download iTunes 10.6.3.
    Third-party security software or router security settings can also cause this issue. To resolve this, followTroubleshooting security software issues.
    Downgrading to a previous version of iOS is not supported. If you have installed software to performunauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. Uninstall the unauthorized modification software from the computer.
    Edit out the "gs.apple.com" redirect from your hosts file, and then restart the computer for the host file changes to take affect. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart.
    Avoid using an older or modified .ipsw file. Try moving the current .ipsw file (see Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations), or try restoring in a new user to ensure that iTunes downloads a new .ipsw.

  • I'm trying to make this work, but can't figure it out. Please help.

    I am trying to make a Presentation to email for others to see without a browser, but when I do, it doesn't show. I've downloaded Adobe Flash Player 10.0 r22, I've built the presentation, I've published the presentation and uploaded to my hosting. I have tried everythiing I can think of. It works on my machine; however, when I try to view it out of it's containing folder, it doesn't show anything but the preloader. Can someone please help me?
    I can send you an example of a working Presentation along with a Zip file containing my presentation with everything I've built if my explanation isn't quite clear. Please help.
    Thank you,

    Yes,
    I need to remove it from this forum.
    Sorry about that,
    R.A

  • HT4528 My IPhone Bugged out/It is currently in the reset mode. I need to exchange all of my contacts from my Yahoo acct. to my new IPHONE. Can you please help me?

    Hello ,
    I purchased my IPHONE about 2 months ago. I am visiting family in DE & this tuesday it starting to go off & on by itself. Then the icons looked like they were floating . Then I could not call or text . The SIRI device would not work. Then it would shut down then the apple icon would reappear. I took it to a verizon dealer in Rehoboth DE & they said it BUGGED OUT/It is in a RESTORE MODE. It will not turn on. We could not transfer anny of my pics or contacts. I never even had a chance to back up the memory on ITUNES.
    The tech @ Verizon said to contact APPLE to trouble shoot and try and transfer the contacts from my yahoo acct.
    Can you please help?
    Gina

    set up your yahoo account in mail, contacts, calendars as an Exchange Account and you should be able to get your contacts from Yahoo from there.

  • How do I find out how many files I have, as an earlier version of iTunes told you at the bottom of the screen. Can you please help me.

    How do I find out how many files I have, as an earlier version of iTunes told you at the bottom of the screen.
    Can anyone please help me with this so I know how many music files or video files I have in my collection.

    Have a look here...
    http://osxdaily.com/2012/11/29/5-tips-make-itunes-look-normal/

  • Hi when i open my application folder, all the application is shown in trash folder. when i click the application it says this app is in trash first move it out. and when i try to open through finder go it says this file doesn't exist. can some1 plz help?

    hi when i open my application folder, all the application is shown in trash folder. when i click the application it says this app is in trash first move it out. and when i try to open through finder> go it says this file doesn't exist. can some1 plz help? how can i put all my application through application folder?

    Something really odd is going on. In your first screen shot, I noticed that the Applications folder does not have the proper icon displayed in the side bar. Also, in the title bar it lists it as Applications 08-59-29-909.
    Not sure where it's picking up that odd name, unless it's because it's still truly within the Trash folder.
    Try this. In the Finder > Preferences > General > turn on "Always open folders in a new window". (I have a feeling you have the default setting with this off).
    Now, in Finder > Go > move down and open the Applications Folder from there. Now open the folder where you see all your applications that you show in your screen shot, select all, and move them to this true appliactions folder.
    This is what you should properly seeing (but with different apps listed):
    See how the Applications folder has the icon of the letter A shaped with a pencil, ruler & pen.

  • HT1338 i have apps to be updated but when i try to update them a message pops out saying "You have updates for other accounts, please sigh in with the other id". Can some one help me how can i still update the same with the new apple id ive created.

    i have apps to be updated but when i try to update them a message pops out saying "You have updates for other accounts, please sigh in with the other id". Can some one help me how can i still update the same with the new apple id ive created. As i dont have the access to the earlier id anymore.

    You cannot. The apps are assigned to that Apple ID and there is nothing you can do to change that. You could choose to download them again with the new Apple ID, any paid apps will need to be purchased again.
    Hope that helps.

  • I have got 2 iPad Air one of it is not logging me in because I have forgotten the pass code and have logged out from iCloud by accident. Can you please help me to use my iPad.

    HI
    I have 2 IPads, I am unable to use one of it because I have forgotten my pass code and also logged out from iCloud accidentially. Can you please help me to solve this problem.
    Cheers
    Raveena

    Follow the instructions on this page : Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support

Maybe you are looking for