Can a line be added to a table?

I converted a very large Word document to .pdf, then made it into a Form (adding and editing form fields).  In one table, on one page, a single line in the word document table was "greyed" and thus did not appear on the acrobat form.  Is there any way of adding that single line to the table rather than go through the entire process of recreating the form after fixing it in Word? 
It took more than an hour to do this (custome form fields) and I would hate to have to spend another hour just because a single line on a single table was missed.
Thank You
Mogadeet

Are you aware that the content, the body text, is on a different layer than the from fields. So if one replaces a page the form fields on that page remain and content behind for the form layer is replaced. Now you only need to realign the form fields as needed and add a row of additional form fields. All of the scripts for the fields. pages, and document remain unchanged.

Similar Messages

  • How to view added rows in table; there is a horizontal line below which any added rows disppear!  Pages version 5.1 which I DESPISE!!!!

    I just replaced Pages after paying Apple $400+ for replacing a wiped-out hard-drive....
    MANY HORRIBLE QUIRKS with Pages 5.1...
    the one I listed above.....it's as if there is only one page....I can't see any added rows in the table below this arbitrary line drawn across the bottom!  I can ADD the rows, but nothing I type in them is visible!

    Do you have Pages '09 in your Applications/iWork folder?
    If not ask Apple to give it to you again.
    You own it.
    Peter

  • Can't delete newly added row in inner advanced table

    Hi!
    Im using advanced in advanced table and i can't delete a row after i added in detail table, i have to refresh the page in order to delete the row.
    This is what i do.
    execute query from master table
    expand row in master table
    click Add row button in detail table(standard button in footer)
    add data in columns
    click save button
    select row with multiselect and then click delete button but nothing's happend i just can delete older rows
    also i can't edit the new row just older rows.
    i think that is something wrong with the cache :S
    any ideas?
    thanks!
    Edited by: 892088 on 03-nov-2011 16:06

    still no answers, the problem is with the new row created because i cant delete or modify it.
    any comment?

  • Can someone help me change the line width of my numbers table, its not set to thin or none and its stuck on .25. its a spreadsheet i imported from excel.

    Can someone help me change the line width of my numbers table, its not set to thin or none and its stuck on pt25. its a spreadsheet i imported from excel.

    MR,
    Apparently the import wasn't a good one.
    The best option at this point might be to start a new table. Insert a new Table, Copy the old table cell range, select the first cell in the new table and Edit > Paste and Match Style. This will throw out all the old formatting. A bit of work, but a nice clean start.
    Jerry

  • Can the cell lines be removed from a table inserted in a Pages document?

    Can the cell lines be removed from a table inserted in a Pages document?

    Inspector > Table > Table > Cell Borders
    The buttons immediately below "Cell Borders" allow you to choose left, right, inside, outside etc.
    Choose None from the border style Pop-up.
    Download the Number'09UserGuide from the Help menu in Pages. Search for borders.
    Regards,
    Ian.

  • UDF in documents lines that can be Change after adding the doc.

    Dear all
    How can i create a UDF in documents lines that can be change after adding the doc? He need to mark some of the lines to already audit or not audit and the date of the action.
    Kind Regards
    Margarida

    It also depends on what documents you are wanting to add these comments to. On documents such as the A/R Invoice/ Delivery, and A/P Invoice/ Goods Receipt PO you cannot change the UDFs on the line item after the document is added (regardless of whether the document is closed). Sales Orders/ Quotes and Purchase Orders line item UDFs can be changed as long as the line hasn't been closed (or partially received/delivered/invoiced).
    Hopefully that makes sense. I could give more of an explanation if I knew what documents you were wanting to add these line item comments to.

  • Nothing added to the table of contents

    I'm using the "Biography" template (portrait only) in iBooks Author. According to Help,
    "By default, the table of contents includes all paragraphs in the book that use the Heading 1 and Heading 2 style, but you can include whichever styles you like."
    So I paste some text into the first two pages of my new book. I select a line of text, show the Styles drawer, and click Heading 1 or Heading 2.
    I choose Table of Contents from the sidebar, and there's nothing added to the table of contents. I preview it on my iPad. Same problem.
    Am I doing something wrong?

    Hello Nick,
    Jquery may be help you to create own TOC and add custom links into it. Here is some ref for you:
    http://tommdaly.wordpress.com/2013/06/27/customize-table-of-contents-remove-libraries-navigation-headers/
    http://sharepointsharpener.wordpress.com/2011/09/27/quick-fix-remove-libraries-lists-from-toc/
    You may also create one custom list and add link to this list. Then get link from this list and place in webpart wherever you want.
    Hope it could help
    Hemendra:Yesterday is just a memory,Tomorrow we may never see
    Please remember to mark the replies as answers if they help and unmark them if they provide no help

  • "Program terminated in remote system NONE: Logon failed" when adding a new table

    Hello,
    I set up a replication flow from a SAP ERP 6.0 EHP7 with SAP ASE 16.0 source to SAP HANA 1.0 rev 82 target
    I am using a standalone SLT system NetWeaver 7.0 with DMIS 2011_1_731 (with SP 1 to 7).
    I have 100 tables to replicate.
    I succeeded to set up replication for 57 tables. These tables are replicating properly.
    Whenever I try to add a new one (with LTRC transaction, Data Provisioning -> Start Replication), the new table is marked as 'Failed' after a little while.
    When I press 'Show Error Log' button I got an obscure error message:
    "Program terminated in remote system NONE: Logon failed "
    I do not understand this message. I checked both on SAP ASE source and SAP HANA target. I am still able to connect against both source and target.
    Can you please tell how to troubleshoot this error.
    Thanks in advance,
    Christian

    First thank you for answering my questions. I really appreciate your answers.
    I rechecked the documentation.
    "Application Operations Guide SAP Landscape Transformation Replication Server Document Version: 2.3 – 2014-07-08"
    Page 29 - 30
    3.5.2.2 Data Transfer Jobs
    This section explains the relationship between the number of data transfer jobs and the number of available background work process.
    Data transfer and data transformation processing on SLT server system is accomplished by the background work processes of the underlying SAP NetWeaver ABAP application server. Each job occupies 1 background work process in the SAP LT Replication Server system. For each configuration, the parameter Data Transfer Jobs restricts the maximum number of data load job for each mass transfer ID (MT_ID). In total, a mass transfer ID (MT_ID) requires at least 4 background jobs to be available:
     One monitoring job (master job)
     One master controller job
     At least one data load job
     One additional job either for the migration objects definition, access plan calculation or to change configuration settings in the Configuration & Monitoring Dashboard
    Example
    If you set the parameter Data Transfer Jobs to 04 in a configuration “SCHEMA1”, a mass transfer ID 001 is assigned. As a result, the following jobs should be in the system:
    1 Master controller job: /1LT/IUC_REP_CNTR_001
     At most 4 parallel jobs for MT_ID 001: /1LT/IUC_LOAD_MT_001_001/~002/~003/~004
    When configuring your data load or replication scenario, consider the following:
     Do not define more data transfer jobs than the number of available application server background work processes. If all available background work processes are already occupied by jobs, any other job will have to wait until a free work process becomes available. This can lead to long wait times until a new activity (for example creating triggers) can start, and can also result in significantly increased latency times for data replication.
     The number of dialog work processes in the source system corresponds 1:1 with the number of data transfer jobs in the SAP LT Replication Server system.
     Besides the work processes allocated by the data transfer jobs you need to provide additional available work processes for controller and monitoring jobs, the migration objects definition, access plan calculation or to perform configuration changes, and so on.
    Sizing for SAP LT Replication Server involves determining how many work processes are required to perform the initial load of data into the target system within an acceptable timeframe, and accomplish the change capturing and the transfer of data changes to the target system within expected latency times.
    Ensure that you add enough additional work processes to allow other required SAP LT Replication Server jobs to run.
    Finally, you map the number of required application server work processes to their system resource consumption (CPU, memory, disc space) using the formulas provided by the SLT Sizing Guide.
    With the simple formula below, you can calculate the number of required application server work processes (WPs) on the SLT Server for each active SLT configuration.
    The number of required work processes can be determined by adding
     The Number of required data transfer jobs ,
     plus one background work process for Central Master (Monitoring) Job (only one per system!),
     plus one background work process for Master Controller Job,
     plus 3-5 additional empty background work processes (recommended per configuration),
     plus approx. 3 dialog work processes (recommended for each configuration).
    Note: A lack of available free application server work processes can negatively affect the data load or data replication processes.
    To summarize everything, the number of 'Data Transfer Jobs' must be set depending of the number of source tables, it is not the actual number of tables.
    Assume that for my 100 tables I use 10 'Data Transfer Jobs' :
    - The number of work processes on the SLT server would be 20. I took the simple formula of the documentation:
    10 data transfer jobs ,
    + 1 background work process for Central Master (Monitoring) Job (only one per system!),
    + 1 background work process for Master Controller Job,
    + 5 additional empty background work processes (recommended per configuration),
    + 3 dialog work processes (recommended for each configuration).
    - The number of dialog processes on the source server would be 10 ( equal to the number of 'Data Transfer Jobs')
    Am I correct ?
    Regards,
    Christian

  • How can i pass calculated value to internal table

    Hi
    i have to pass calculated value into internal table
    below field are coming from database view and i' m passing view data into iznew1
    fields of iznew1
                 LIFNR  LIKE EKKO-LIFNR,
                 EBELN  LIKE EKKO-EBELN,
                 VGABE  LIKE EKBE-VGABE,
                 EBELP  LIKE EKBE-EBELP,
                 BELNR  LIKE EKBE-BELNR,
                 MATNR  LIKE EKPO-MATNR,
                 TXZ01  LIKE EKPO-TXZ01,
            PS_PSP_PNR  LIKE EKKN-PS_PSP_PNR,
                 KOSTL  LIKE EKKN-KOSTL,
                 NAME1  LIKE LFA1-NAME1,
                 NAME2  LIKE LFA1-NAME2,
                 WERKS  LIKE EKPO-WERKS,
                 NETWR  LIKE EKPO-NETWR,
                 KNUMV  LIKE EKKO-KNUMV,
                 GJAHR  LIKE EKBE-GJAHR,
    and now i want to pass
    one field ED1  which i has calculated separatly and i want to pass this value into iznew1
    but error is coming that iznew1 is a table with out header line  has no component like ED1.
    so how can i pass calculated value to internal table iznew1,

    When you declare your internal table , make an addtion occurs 0
    eg . data : begin of iznew occurs 0 ,
                    fields ...
       add the field here ed1.
               end of iznew.
    now when you are calculating the value of ed1,
    you can pass the corresponding value of  ed1 and modify table iznew.
    eg
    loop at iznew.
    iznew-ed1 = ed1.
    modify iznew.
    endloop.

  • How to draw horizontal line at the end of table for multiple line items

    Dear Experts,
                       Pls can anyone help me how to draw horizontal line at the end of table for multiple line items . kindly help me regarding this
    Thanks
    Ramesh Manoharan

    Hi
       I tried as per your logic but it is not solving my problem .  when i am gone to table painter it is showing line type 1 and line type 2
      is below format.. if u see here line type 1 bottom line and line type 2 top line both are same..  so how to avoid this ?
                              line type 1
                             line type 2

  • Closing INDIVIDUAL lines for input in a table control

    Right, hopefully I can explain my issue clearly enough to get an answer that will help me resolve this pain in the *** issue.
    My table control has a delete function but the client doesn't want the line removed from the control table they simply want the line in question to be greyed out (closed for input). Has anyone achieved this in the past? I know it's possible to grey out columns but I can't see any way of doing individual lines.
    For all answers that help me I will shout a beer provided you are in either Sydney or Adelaide.

    Hi,
    >
    Neil Gardiner wrote:
    > Right, hopefully I can explain my issue clearly enough to get an answer that will help me resolve this pain in the *** issue.
    >
    > My table control has a delete function but the client doesn't want the line removed from the control table they simply want the line in question to be greyed out (closed for input). Has anyone achieved this in the past? I know it's possible to grey out columns but I can't see any way of doing individual lines.
    >
    > For all answers that help me I will shout a beer provided you are in either Sydney or Adelaide.
    Refer:-
    it_zekpo is my internal table w/o header line,
    wa_zekpo is work area.
    Name of input/output fields on screen are:-
    wa_zekpo-field1,
    wa_zekpo-field2, and so on...
    Add a field as flag(1) type c in the internal table and work area
    And keep a name of SELCOL in the attributes of table control as wa_zekpo-flag
    Take the group1 for all textboxes as 'ABC' in the table control
    Try using code:-
    At screen logic:
    PROCESS BEFORE OUTPUT.
    *  MODULE status_8003.
      LOOP WITH CONTROL po_tb.
        MODULE read_data.
      ENDLOOP.
    PROCESS AFTER INPUT.
    *  MODULE user_command_8003.
      LOOP WITH CONTROL po_tb.
        MODULE modify_data.
      ENDLOOP.
    In PBO
    *&      Module  READ_DATA  OUTPUT
    MODULE read_data OUTPUT.
      READ TABLE it_zekpo INTO wa_zekpo INDEX po_tb-current_line. "po_tab is table control name
      data : line_count type i.
      describe it_zekpo
      lines line_count.
      po_tb-lines = line_count + 10.
      "to increase the number of lines in table control dynamically
      if sy-ucomm = 'DELETE'. "<--when user click delete button
        if wa-zekpo-flag = 'X'. "<--if record selected
          if screen-group1 = 'ABC'.
            loop at screen.
              screen-input = 0. "disable
              screen-active = 0.
            endloop.
            modify screen.
          endif.
        else. "<--if record not selected
          if screen-group1 = 'ABC'.
            loop at screen.
              screen-input = 1. "enable
              screen-active = 1.
            endloop.
            modify screen.
          endif.
        endif.
      endif.
    ENDMODULE.                 " READ_DATA  OUTPUT
    In PAI
    *&      Module  MODIFY_DATA  INPUT
    MODULE MODIFY_DATA INPUT.
      MODIFY IT_ZEKPO FROM WA_ZEKPO INDEX po_tb-currentline.
      "this will insert a new line
      "and will modify the contents of existing line
    ENDMODULE.                 " MODIFY_DATA  INPUT
    Hope this helps you.
    Let mw know if you have any doubts.
    Regards,
    Tarun

  • Need suggestion on adding Index on table

    Hi,
    There is table called customer_locations in my database which has records about more then 5000 rows, When we write some select query to fetch data from this table takes too much time to load the data.
    Need a suggestion how to add index to increase the performance on this table. also which type of index to be added need a suggestion
    table sql script is mentioned below
    CREATE TABLE "CUSTOMER_LOCATIONS"
    (     "LOCATION_ID" NUMBER NOT NULL ENABLE,
         "COMPANY_NAME" VARCHAR2(512),
         "ADDRESS_LINE_1" VARCHAR2(512),
         "ADDRESS_LINE_2" VARCHAR2(512),
         "PHONE_NUMBER" VARCHAR2(255),
         "FAX_NUMBER" VARCHAR2(255),
         "CITY" VARCHAR2(512),
         "STATE" VARCHAR2(512),
         "ZIP" VARCHAR2(100),
         "COUNTRY" VARCHAR2(255),
         "CREATED_BY" VARCHAR2(512),
         "CREATED_DATE" TIMESTAMP (6),
         "MODIFIED_BY" VARCHAR2(512),
         "MODIFIED_DATE" TIMESTAMP (6),
         "DOMAIN_ID" NUMBER,
         "LOCATION_TYPE" VARCHAR2(255),
         "STATUS" VARCHAR2(50),
         "IB_STATUS" VARCHAR2(100),
         "OLD_LOCATION_ID" VARCHAR2(50),
         CONSTRAINT "SS_CUSTOMER_LOCATIONS_PK" PRIMARY KEY ("LOCATION_ID") ENABLE
    Please suggest
    Thanks
    Sudhir

    Hi Sudhir,
    Since you have no predicates it would be unavoidable to have FULL TABLE SCAN. But let me tell you that FULL TABLE SCANS are not bad.
    Just to help you with, the below code can enunciate the use of Indexes:
    drop table test_table;
    create table test_Table as select * from all_objects where rownum < 5001;
    select * from user_ind_columns where table_name = 'TEST_TABLE';
    --No rows fetched.
    explain plan for
    select object_name || ' is a ' || object_type as OBJ_DESC, object_id
      from test_table;
    --5000 Rows fetched
    select operation, options, object_name, object_alias, object_instance, object_type, optimizer, depth, position, cost, cardinality, cpu_cost, io_cost
    from plan_table;
    OPERATION               OPTIONS     OBJECT_NAME     OBJECT_ALIAS          OBJECT_INSTANCE     OBJECT_TYPE     OPTIMIZER     DEPTH     POSITION     COST     CARDINALITY     CPU_COST     IO_COST
    SELECT STATEMENT     (NULL)     (NULL)          (NULL)                    (NULL)               (NULL)          ALL_ROWS     0          19               19          5000          1698651          19     
    TABLE ACCESS          FULL     TEST_TABLE     TEST_TABLE@SEL$1     1                    TABLE          (NULL)          1          1               19          5000          1698651          19
    alter table test_Table add constraint pk_object_id PRIMARY KEY (object_id);
    explain plan for
    select object_name || ' is a ' || object_type as OBJ_DESC, object_id
      from test_table
    where object_id = 26;
    select operation, options, object_name, object_alias, object_instance, object_type, optimizer, depth, position, cost, cardinality, cpu_cost, io_cost
    from plan_table
    where statement_id = 'WITH_PK';
    OPERATION               OPTIONS               OBJECT_NAME          OBJECT_ALIAS          OBJECT_INSTANCE     OBJECT_TYPE          OPTIMIZER     DEPTH     POSITION     COST     CARDINALITY     CPU_COST     IO_COST
    SELECT STATEMENT     (NULL)               (NULL)               (NULL)                    (NULL)               (NULL)               ALL_ROWS     0          2               2          1               15543          2
    TABLE ACCESS          BY INDEX ROWID     TEST_TABLE          TEST_TABLE@SEL$1     1                    TABLE                              1          1               2          1               15543          2
    INDEX                    UNIQUE SCAN          PK_OBJECT_ID     TEST_TABLE@SEL$1     (NULL)               INDEX (UNIQUE)     ANALYZED     2          1               1          1               8171          1Let me know if it help or if you still have any concerns.
    Regards,
    P
    Edited by: PurveshK on May 29, 2012 12:40 PM

  • Line items missing in RFC table when they are more than one!!!

    Hi All,
    I am doing a scenario where i map a proxy from SCM to a RFC in R/3.
    The problem i am facing is my proxy has more than 1 line item for a purchase order but in R/3 the RFC table contains only the first line item.
    Is there any special mapping that i need to do to capture multiple line items in a PO.
    Regards,
    Jayaram.M

    Hi,
    When you do the mapping, test it with the payload and see whether you are able to generate multiple line items in the target.
    Next check how you are passing it to the RFC, whether as a single line item or as a table.
    If in the mapping you were not able to see the multiple line items, check your context changes accordingly.
    Accordingly you can check.
    Regards
    Krish

  • FI- Line Item Extraction- BWOM_SETTINGS- Control Table Entries

    Gurus,
    I am working on FI- Line item extraction in the sand box. I have all my DS's in Nodes not connected. I transfereed the application component hierarchy in SBIW. Now I went to check on the basic settings before activating the DS's for FI line item- in the control table, BWOM_SETTINGS, I could not find any parameters- lowlimit, safety, there are only 2 parameters-OBJSELSICO-'X', and OBLIGODELT- ' '.
    We can enter the param values manually and transfer global settings to BI. Could we do the same for fields too. Could we enter them manually?
    Why does my control table doesn't have the fields for std line item extraction- lowlim, safety, timbor, overla. My plug- ins are good. I have all the plug ins. I can see them in dev box but not sand box. Why?

    Hi Ram,
    I think Time stamp will set in this table when we run first delta or init in BI system.
    So activate the data source and replicate the same BI system. develop data model for this data source and run the init for this data source.
    then you will be able to find time stamp for this data source.
    FI-Line item data-Delta.
    0FI_GL_4 delta functionality?????
    Regards,
    Venkatesh

  • How can i get login details to a table?

    i am using my sql data base.people who are visiing my web
    site can log in to the sites restricted areas using their Usernames
    and Passwords. (the login is based on the "Register" table in the
    data base)
    When somebody enteres the site using their Username and
    Password, and inputs new data to anothertable (classified table),
    How can the classified table get the login Username to one of its
    columns. (automatically Username of the user is added to the table)
    how can i do that. A coding for that would e perfect. please
    help me. i would be really greatful to you.
    thanks
    sisira

    Sisira,
    When you add the record to your table, include the UserID as
    one of the
    values. Just assign the current Username to a variable and
    include that in
    your SQL statement. (How you do this will depend on the
    scripting language
    that you are using)
    UserVariable = <set this from your login session>
    INSERT INTO anothertable (Field1, Field2, Username)
    VALUES (value1, value2, UserVariable)
    Does this make sense? If not, send me your page and I'll have
    a look at it.
    Please Zip the file first.
    HTH
    Steve
    "[email protected]"
    <[email protected]> wrote in message
    news:fi2kvl$4or$[email protected]..
    >i am using my sql data base.people who are visiing my web
    site can log in
    >to
    > the sites restricted areas using their Usernames and
    Passwords. (the login
    > is
    > based on the "Register" table in the data base)
    >
    > When somebody enteres the site using their Username and
    Password, and
    > inputs
    > new data to anothertable (classified table), How can the
    classified table
    > get
    > the login Username to one of its columns. (automatically
    Username of the
    > user
    > is added to the table)
    >
    > how can i do that. A coding for that would e perfect.
    please help me. i
    > would
    > be really greatful to you.
    >
    > thanks
    >
    > sisira
    >

Maybe you are looking for