Can a Salesforce lead be created automatically upon completion of an Echosign widget?

I have created an Echosign widget that is hosted on my website to collect information from potential customers. I would like the information collected in that widget to be sent to Salesforce to create a new lead. Much of the documentation I see is how to send a document from inside Salesforce. I want the relationship to flow the opposite direction where EchoSign pushes information to Salesforce and creates a new lead upon submission.

see the chapter
Updating Salesforce with Push Agreements
of the installation and customization guide. (page 83 of the v16 guide)
You can use Adobe Document Cloud eSign API to send agreements for signature or create Widgets and
embed them on your website and have all those agreements pushed and created in Salesforce.com just as if
they were sent from Salesforce.com. You can also send agreements via the echosign.adobe.com web
application and have them all pushed back to Salesforce.
Note: This feature is not supported in Salesforce Professional Edition.
if the agreement is signed by an email address which is ot yet a contact in your instance, it can be created as a lead.

Similar Messages

How can I get files to open automatically upon download?

I would like files I download to open automatically and for the download window to be turned off. I know how to turn off the download window, but cannot get files to automatically download.

Hi JJMack. Thanks for getting back to me.
I think I've created confusion about what I want. All I want is to end up with a file that is flattened so that I can save it as a tiff without getting a warning that it contains layers. Please correct me if I’m wrong but I’ve always assumed I should always flatten a file before I save it as a tiff unless I specifically want to retain layers or transparency. I’m only talking here of files that open with a single layer: ie. Layer 1. I assume that if I don’t flatten such files the resultant files will be unnecessarily big?
The only reason I keep saying I want a Background layer is that I know that a flattened file will only have a Background layer. I don’t have any desire for a Background layer per se. I certainly don’t want to add extra layers - quite the opposite.
So perhaps the question I should have asked should have been:
How can I get files to open 'ready-flattened' by default so I can save them directly to tiff without having to manually flatten them every time?
Cheers

Can STOs be setup to create delivery if 'complete' i.e. all items in stock?

Hi
we use Stock transport orders to ship product cross company codes. Issue we have is that system created musltiple deliveries based on inventory availability. We would rather have the STO delivery created when all the items in the STO have stock. is thee a means to set that up either via config, user exit etc?
We would like to only trigger the delivery if the order is complete.
We are on SAP 47 extension set 1
Thanks
Bill Olliver

Hi,
You can try setting this up in the customer master created for the other company code in shipping tab input "c"-"Only complete delivery allowed" in the field "Partial delivery per item"
Please try this it should work
Good luck
Sridhar

Can a Photo Gallery be created using the Meta Data with a Widget or Lightroom ?

I want to create a website with a bunch of photo galleries, but I have to have the Titles and Descriptioins from the Meta data used.
Can Muse import Lightroom Photo Gallery's web pages?
Or, Is there a widget to do this?

So your saying import a Gallery from Lightroom using Muse's slideshow widget, which ignores titles/descriptions?
I'm finding it very difficult to understand why Muse would not use this information as it clearly shows the File Names in Asssets.
The workflow seems simple: Take A picture, Bring it into Lightroom, Adjust and enter WHAT it is with Titles and Descriptions, use it ALL in a website.
I've got some 500 photos.
Re-entering Titles/Description information everytime it's used in a website is not something anybody should have to do.
Please help, there has to be a better way to do this.
I'm eager to buy Adobe's product to do this if it can be done.
Adobe is too smart to leave out something so simple with MUSE.

Can iWeb Be Used To Create and Edit Completely Seperate Web-Sites/Pages?

Is it possible to use iWeb to create completely separate web-sites/pages? As far as I can tell even what is called NEW SITE simple creates a new nested SITE folder.
I want to use iWeb to edit totally separate web-sites.
I want to be able to make a single word change on my home page without having to upload and replace my entire site.
My work around for example would be to keep my Photo and Movie Album separate (where most of my memory intensive files reside)from the part of my site which is mostly text. And when I make a single word change to my home page I would simply upload that page. I would have a link from my home page to my Photo and Movie Album - much like I edit web-pages in Dreamweaver.
Any suggestions?
thanks.

There are many ways to create brand new Domain/Site/page, see my posts:
http://discussions.apple.com/thread.jspa?messageID=6460488&#6460488
http://discussions.apple.com/thread.jspa?messageID=6007612&#6007612
Splitting domain.site(2) is bad juju:
http://discussions.apple.com/thread.jspa?messageID=6261141&#6261141

Schedule A Job To Run Upon Completion of The Currently Running Query

Hi friends,
Sometime right after sometime a query starts I realize the same to be taking quite a long time and then upon realizing that I hadn't selected the next portion of the T-SQL which depends upon the result of the ongoing query I have to wait for hours to launch
the same after completion of the first part. In such a case could there be a way to somehow assign SQL Server Agent a Job to check the status of the ongoing query at some intervals of 10-15 minutes,
or preferably some other way, to trigger the job of carrying out the pending job automatically upon completion of the ongoing query?
Thanx in advance, Best Regards, Faraz A Qureshi

Something like:
if exists(
select * from sys.dm_exec_sessions s
inner join sys.dm_exec_requests r
on s.session_id = r.session_id
where r.session_id = ??
and s.program_name like 'Microsoft SQL Server Management Studio%'
and s.login_name = 'MyLoginName'
and r.status = 'sleeping'
Satish Kartan www.sqlfood.com

Can I tell Acrobat where to automatically create forms when scanning in many of the same document?

The automatic form creator isnt very good at recognizing where I want text forms when I scan in this particular paper form. I have lots of these paper forms that look the same and am trying to convert each of them into a editable digital copy. Is there a way to help acrobat know where i want the text forms to be on the following scans without manually making the text forms everytime?

No, but you can:
- Use a script to create the fields in pre-defined locations
- Create them once and then copy them over (Ctrl+C, Ctrl+V) to over files
- Create them once and then use the Replace Pages function to other files.

How can create automatic billing?

hi,
I want to create automatic billing after creation the goods issue in delivery.
I want to know how we can do it and is it necessary to use special user exit to program or not?
Thank you.

Hi Lida,
Take the help of BASIS and give them the criteria as to for what billing types you want to do the Auto invoicing and then other criteria ( like docs with PGI or with out PGI n other ) save the criteria as variant and ask the BASIS team to run it at regular or required intervals...
Also take a look at the below link if you wish to and check if any of the userexits meets your requirements.
[https://www.sdn.sap.com/irj/scn/wiki?path=/display/erplo/sdUserexits]
Hope it helps
Thanks and Regards
Rohit.

Script to create 2 column CSV and zip upon completion

I'm trying to to grab images or PDF's in a folder, add those containing "front" into the 1st column of a CSV, those containing "back" to the 2nd column and then zip/archive it upon completion. So far I'm using the following script, which add's all PDF/png files to the CSV in a single column.
How do I create column headers and add files containing "front" to the first column and "back" to the second?
Thanks in advance for the help.
do shell script "find ~/Documents/csvConvert/pngFiles \$ -iname '*.png' -or -iname '*.jpg' \$ -exec basename {} \\; | sed -e 's/.pdf$//' -e 's/.jpg$//' -e 's/^.*$/\"&\"/' > $HOME/Documents/csvConvert/Groups/PDFfiles.csv"

I'm not sure how you are running the script e.g. Automator or in an Applescript. Because there are several steps involved I have just done it all in a shell script…
To use it copy & paste into a plain text file (TextWrangler is a decent free code editor with syntax highlighting - it makes life easier).
Save the file as paginator.sh
Make it 'executable' (only need to do this once). In Terminal…
chmod +x paginator.sh
Now you can run it by using…
paginator.sh
Obviously use the full path to the file in those commands (drag & drop the file to get Terminal to autofill it).
This is the script…
#!/bin/sh
# Output file
OUTFILE="${HOME}/list.csv"
# source folder with images
FILES="${HOME}/test/"
# Files for temporary storage of filename lists
FRONTLIST="${HOME}/list-front.txt"
BACKLIST="${HOME}/list-back.txt"
# list front & back into text files
find "${FILES}" $ -iname '*.png' -or -iname '*.jpg' $ -and -iname front\* -exec basename {} \; | sort -n > "${FRONTLIST}"
find "${FILES}" $ -iname '*.png' -or -iname '*.jpg' $ -and -iname back\* -exec basename {} \; | sort -n > "${BACKLIST}"
# Setup CSV with headings
echo "front,back" > "${OUTFILE}"
# Merge 2 list files with a comma
pr -m -t -s\, "${FRONTLIST}" "${BACKLIST}" >> "${OUTFILE}"
# strip pdf, jpg, png suffixes from the output file
sed -i '' -e 's/\.jpg//g' -e 's/.pdf//g' -e 's/\.png//g' "${OUTFILE}"
# remove temp files
rm "${FRONTLIST}" "${BACKLIST}"
In short it finds the front & back files (sorts then & saves that in two text files).
Then it merges them via 'pr' and removes the suffixes in one pass of the output file. I have removed the last piece of the sed (I'm unsure what it was for).
It saves into ${HOME}/list.csv Which is the users home folder
There are is room for improvement on this but it creates the csv as desired…
The sort will place front_10.jpg before front_1.jpg (You must use leading zeros on all your files - e.g. file_01.jpg, back_01.png…)
This does not account for nested folders! It will find files at every level! (you can add '-maxdepth 1' to stop find going into nested folders).
The output depends on the file names & if one file is missing the order goes out of sync (you should probably search for the correct 'back_' image & a pair them up correctly with extra logic).
The paths are 'hardcoded' (you can make it accept input so that you can pass the 'files folder' and the 'output file' name into it).
If this is all too complex you could try to re-purpose into an Automator or Applescript, but I think if you are calling repeated 'do shell script' actions it is a sign you could be using the shell itself. It can be wrapped up if you need to make it run like an application - or just give it a '.command' suffix & it should just launch Terminal & run when you double click the file.
Let me know what you think.

Internal Order for AUC Asset not getting created Automatically

As per SAP Standard , when I create an AUC Internal Order (KO01), and save , AUC asset is gets created automatically ted via AS01 and stores the AUC Asset in Internal Order settlement rule.
However when tried with the client Im not able to create, AUC is not getting automatically created and stored in Int Order Settlement rule.
In config I have added investment profile to Ord Type and in OAOA ( AUC Asset class setting , Investment profile is also checked)
Kindly let me have your inputs to fix the issue
Advance Thanks
Sanjai

Hi,
In order to create AUC asset automatically by the system, you need to create an investment profile in OITA.
Then assign this investment profile in the Internal order master data created through KO01 in the Investments tab.
There is no option of assigning the Investment profile in the Order type.
And in OAOA that is Asset class, select the radio button investment measure.
You can default the Asset class of AUC in the investment profile or leave it blank so that same can be filled when system prompts for AUC creation.
You cant see the AUC asset in the settlement rule once Investment order is created, but only after settlement of the balances to the AUC u can see.
Thanks & Regards,
Ravi Kumar

No TO is created automatically when Kanban is set to empty sometimes

Hi Gurus,
My customer come across a strange problem.
The same material , the same Kanban, sometimes TO can not be created automatically when Kanban is set to empty, but sometimes TO can be created automatically.
I checked the following things:
Configuration :activate 'Automatic TO creation immediately after TR generation' for replenishment strategy '0006 Kanban from WM with transfer requirement'.
Storage type and storage section search strategy are right.
Master data: MRP2 View and WM1 and WM2 view are right.
Supply area and control cycle are right.
Stock: there is enough stock in right storage type and storage section
when the TO is not created automatically , i can use LT04 to create TO , and search stratey works well. and TO can be created successfully.
So only i can come up is because of some one is creating TO , so no TO can be created because of the material is blocked .
Do you know any other reason will cause this problem?
BR,
Dragsky

Who has any idea on this? thank you!

How to create automatic creation of BP from customer and vendor master data

Hi gurus,
can any one tell how to create automatic creation of BP from customer and vendor master data.
Please give me the steps.
Thanks
Sasikanth.

HI,
Goto SPRO\ Cross application components \ Master data synchronization \ Synchronization control.
Assign account groups of customer and vendors to respective BP grouping. This setting is enough to create BP in background while creating customer / vendor. But the fields groups are very much important, ensure mandatory fields should be sync.
rgds,
Srini

I installed CS6 on Mac Pro (10.9 software version). I don't see the Adobe PDF printer in the printer/fax section. I can not figure how to create the PDF Printer.

I can not figure how to create a Adobe PDF Printer. Normally when you install the package ( CS6 Standard for Mac Pro) the installer creates the PDF printer automatically. In the System Preferences under the Printer/Fax I don't see the PDF printer. How do you create the PDF printer.
Thanks,
Melanie

did you install acrobat x and does it work as expected?

Unique Index Created Automatically on FK Columns

Referencing the following document under Forward Engineering, http://www.oracle.com/technetwork/developer-tools/datamodeler/newfeatures30-224506.html
Unique index is created for One-to-one relationships defined in the Logical model if there is no PK/UK constraint or unique index defined over foreign key columns.
Why are unique indexes created automatically for foreign key columns? Should "lookups" not be defined in the logical model? I don't understand why it's designed to behave that way.

Why are unique indexes created automatically for foreign key columns? They are created automatically only for 1:1 relationships in order to support that business rule.
Should "lookups" not be defined in the logical model? Can you elaborate on that?
Philip

SRM Purchase Order not Created Automatically

SRM 7.0 Extended Classic Scenario:
Issue: When creating a standard shopping cart in SRM the Purchase Order is not created in SRM (or in R3). Eventhough the shopping cart is fully approved and has a vendor assigned. The overall shopping cart status remains approved,the line items status shows 'item in transfer process'. Otherwise there are no errors in the application monitor. Nothing appears in table BBP_DOCUMENT_TAB
Considerations: Everything is working fine for limit shopping cart, the PO gets created automatically and the SC has status follow-on document created.
Also, this was working fine for standard orders, it seems that support pack 7 or 8 broke this functionality, yet I do not see any notes regarding the issue. Any ideas on what controls the automatic PO generation or how it could work for limits but not standard SC's would be greatly appreciated.
Thanks,
Matt
Edited by: Matt Joseph on Nov 17, 2010 10:27 AM

First of all PO should be created then you can see entry in doc table.
u Note 1480994 - How to process a shopping cart with status I1111?
see SAP treatment and some work around..
Symptom
Shopping Cart is stuck in status I1111 (Item in transfer process).
Other terms
Application Monitor, I1112, I1111, Monitor Shopping Cart
Reason and Prerequisites
This is a FAQ note, which shows how to treat such Shopping Carts.
Solution
Shopping Cart status I1111 (Item in transfer process) is a temporary status, which means that shopping cart is being processed in order to generate a follow-on document.
However, it is possible that status I1111 becomes permanent and, in this case, shopping cart status is inconsistent.
There are some procedures to be considered when shopping cart is stuck in status I1111.
Report BBP_ALERT_SB_NOTTRANSFERED is available to change the status of the shopping cart item from I1111 to 'Error in transmission' (I1112) and later on, it is possible to retransfer this shopping cart from Application Monitor/Monitor Shopping Cart transactions.
Note 441768 provides more information about this report.
However, BBP_ALERT_SB_NOTTRANSFERED works in a time stamp. BBP_ALERT_SB_NOTTRANSFERED will check shopping carts created after date specified in table BBP_CONTROL.
To check this information, go to SE16 -> BBP_CONTROL and as input parameter provide the report name. Here you will see the last date that report has been run.
If you have a shopping cart in status I1111 which is older than date specified in table BBP_CONTROL, you have to change manually the time stamp specified in such table. You have to specify an older date (before shopping cart creation).
Doing this, you can run report BBP_ALERT_SB_NOTTRANSFERED and cart in question will have status I1112 assigned.
Once status I1112 is assigned to shopping cart, you can retransfer it from Application Monitor (BBPWEBMONITOR transaction in SAP_GUI) or Monitor Shopping Cart in the web.
To transfer Shopping Carts from BBPWEBMONITOR, some settings need to be done.
Following notes should be considered:
550044
FAQ Alert monitor RZ20 does not show any alerts
396102
BBP Alert monitor RZ20 does not work
387701
The Shopping Card are not transfered after "resubmit"
According note 387701, workflows WS10000214 and WS10000215 have to be activated. One of them is to delete shopping cart item using Application Monitor and the other one is to resubmit the cart. Then, once this settings are done, you can retransfer I1112 carts from Application Monitor.
If all settings are done and you have a cart with status I1112 that it is not appearing in Application Monitor, report BBP_ALERT_SC_STATUS_ERROR is available, which checks the carts in status I1112 and put them in the Application Monitor, in order to allow you to transfer them again. Note 631513 explains about this report.
Additional notes to be considered in this scenario:
1159609
Transfer function does not create local purchase orders
1233037
BBP_MON_SC: Shopping cart transfer ends in status I1111
1040878
Cannot transfer shopping carts with status I1112
Header Data
Release Status: Released for Customer
Released on: 09.08.2010 16:04:09
Master Language: English
Priority: Recommendations/additional info
Category: Consulting
Primary Component: SRM-EBP-SHP Shopping Cart
Secondary Components: SRM-EBP-APM Application Monitors
Affected Releases
Release-Independent
Related Notes
1233037 - BBP_MON_SC: Shopping cart transfer ends in status I1111
1159609 - Transfer function does not create local purchase orders
1040878 - Cannot transfer shopping carts with status I1112

Can a Salesforce lead be created automatically upon completion of an Echosign widget?

Similar Messages

Maybe you are looking for