Can a thread created in an applet still run after the browser is closed?

Dear all,
I was able to make an applet's thread keep running even the web page changed to other page. Is it possible to make a thread spawned by an applet keep running even if the browser is close? I am using signed applet and JRE1.3.1_02. Thank for answer.
[email protected]
Arthur Pan

No. A thread is part of a process and if the browser closes that process will (generally) be destroyed.

Similar Messages

  • What can be done if other higher bids are received after the bid is closed?

     What's your question? When an auction ends normally, no more bids are accepted and the highest bid received wins the auction. Or do you mean, what to do if I'm outbid?

    Are you the buyer or the seller? If the auction is closed and someone contacts you with another, higher bid, too bad for him (and you). It would be unethical (and difficult) to refuse the winning bidder.To say nothing of dealing with someone who is unwilling to follow the normal, protected procedures. If you are a bidder and someone bids higher than you, bid again.The usual advice is : bid once, bid your maximum.The eBay 'bots won't push your bid any higher than you have instructed them. That can be trusted. 

  • Creating a Mavericks USB boot drive after the horse has bolted.  Can I create a bootable USB drive from my iMac after installing Mavericks without saving the Install OS X Mavericks.app file?  Do I need to re- download the whole 5.29 Gb again?

    Creating a Mavericks USB boot drive after the horse has bolted.  Can I create a bootable USB drive from my iMac after installing Mavericks without saving the Install OS X Mavericks.app file?  Do I need to re- download the whole 5.29 Gb from the App Store again?  My problem is my 4Gb/month allowance on a 12 month contract.  I cannot purchase a data block from my ISP and although my speed is theoretically slowed to 64k after reaching my 4Gb, it actually ceases to download in reality.

    HI tasclix, it depends what you mean by an OS X boot drive.
    If you want a recovery disk from which you can reinstall (by re-downloading) or recover from a time machine backup, then nbar is correct.
    If, however, you want to boot and run the OS X installer from the USB drive (so that you don't need to download again), then you will need a copy of "Install OS X  Mavericks.app"; see this article:
    http://support.apple.com/kb/HT5856
    Before downloading again, search your system to see if the installer is still there - it's usually in the /Applications folder unless it has been deleted, but check your whole system for it anyway, you never know, you might still have it somewhere.
    Message was edited by: SilverSkyRat

  • Why can't I create a response to an email from the Viewer window?

    Why can't I create a response to an email from the Viewer window?
    When I select an email to respond to in the viewer window and click on the respond arrow that appears just under the header, a new response email opens for a split second then disappears.
    I have to actually click on and open the email message in its own screen to be able to then click on the respond arrow and succeed in having Mail open a response email that I can edit - one that remains open.
    This seems to be a bug that we need to have squashed.
    Steve

    Do I have to connect the iPad to a computer to make this work? Is the fact that I used another email address to set up my Apple ID years ago causing the problem? A friend of mine just got a new iPod and he was able to set up a me.com account. I am feeling rather stupid. Hope someone here can help.

  • Recently, after cancelling the tick of a song, which is the next song after the one I am listening, in the song list, the canceled song will still run for the next song. I remember that it used not to happen like this. How can I solve this problem?

    Recently, after cancelling the tick of a song, which is the next song after the one I am listening, in the song list, the canceled song will still run for the next song. I remember that it used not to happen like this. How can I solve this problem?

    This looks like a change of behaviour in iTunes 12. Once songs are queued up to the Up Next list then they play whether ticked or not. If you want to skip certain songs already queued click the Up Next tool, then click the small X to the left of the song that appears when you hover over it.
    tt2

  • Why can I only create 4 forms when I have purchased the entire package at 100+ dollars?

    Why can I only create 4 forms when I have purchased the entire package at 100+ dollars?

    FormsCentral can be used from anywhere, but to purchase a subscription you need a credit card with the mailing address in one of the countries supported for purcahse:
    http://forums.adobe.com/docs/DOC-1375
    The partner can purchase if they have access to a card in one of those countries.  Alternatively they do not need to purchase a subscription to edit forms that you've created, they do in order to create multiple forms of their own, but by your sharing forms with them at the "Co-author" level they have access to the editing.  Here are the instructions to share a form:
    http://forums.adobe.com/docs/DOC-2462
    Thanks,
    Josh

  • Can photo slideshows created on our iMac be seen on the TV via Apple TV?  We cannot see them.

    Can photo slideshows created on our iMac be seen on the TV via Apple TV?  We cannot see them on the TV.

    Welcome to the  Discussion Forums.
    Have you tried Repopulating iTunes with the files that you have problems with.

  • Just updated to 8 & now I can't open any web pages & firefox is still running in the background after browser was closed. I uninstalled and reinstalled as well as disabled add-ons and plugins nothing has changed, can I downgrade back to on older version?

    Just updated to 8 & now I can not open any web pages as well as firefox will not close out, it still running in the background after browser was closed. I uninstalled and reinstalled as well as disabled add-ons and plugins nothing has changed, can I downgrade back to on older version?

    See "Hang at exit":
    *http://kb.mozillazine.org/Firefox_hangs
    See "Firefox hangs when you quit it":
    *https://support.mozilla.com/kb/Firefox+hangs
    A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.com/kb/Server+not+found
    *https://support.mozilla.com/kb/Firewalls

  • I have a new iphone 5s with ios 7 , I cannot pair with the bluetooth in my BMW with idrive , can anyone help . My old iphone 4 worked fine , however this was initially paired with older software , but still worked after the upgrade

    I have a new iphone 5s with ios 7 , I cannot pair with the bluetooth in my BMW with idrive , can anyone help . My old iphone 4 worked fine , however this was initially paired with older software , but still worked after the upgrade . I have tried & tried to pair again & that wont work either , suggesting it is the phones software . Can anyone help please

    Hi there soulboycraney,
    You may find the troubleshooting steps in the article below helpful.
    iOS: Troubleshooting Bluetooth connections
    http://support.apple.com/kb/TS4562
    iOS: Troubleshooting car stereo connections
    http://support.apple.com/kb/ts3581
    -Griff W. 

  • Dragging a large still image from the browser into the viewer crashes FCP

    Okay, I've not seen this problem until just a couple days ago but was wondering if it was just me or if everyone has this problem? I've found a work-around, but let me explain the problem first.
    I'm creating a growing up photo montage. I scanned all of the pictures myself at 300 dpi (as I've always done in the past) and saved them as TIF files. Some pictures as relatively small, i.e. 3.5 mb is size and do just fine, but it appears anytime I drop a picture into the viewer in preparation for the the timeline, it will crash FCP if the image file is any larger than about 5 or 5.5 MB. Now I know there is a limit on the resolution of a still and it shouldn't be any larger than 4000 pixels in either direction, but that is not my problem, the problem appears to occur with large files. I've used large still files before in past projects without any problem, so this is why I'm stumped. I've went as far as trashing my preferences, but that didn't change anything. I've even tested a still image from a past project that was something around 9 MB (or was it 19 mb?) in any case, it also crashed FCP but... I've used that picture before in past projects without any problem. I even created a new test project just in case my project file itself had a problem.
    My work-around is to simply drop the still image from the browser directly into the timeline, thus bypassing the viewer. This works every time without a hitch. I can even double-click on the still now setting in the timeline to load it into the viewer so I can add effects or keyframes or whatever without any problems (thank goodness). So, has anyone else experienced this problem or is it just me?

    Is this image saved in a colorspace mode that is anything other than RGB?
    CMYK & Grayscale images will cause problems.
    Some light reading regarding your choice of 300 dpi: http://www.scantips.com/no72dpi.html
    Unless you plan on panning and zooming your images, the best procedure is to use one of the video preset templates in Photoshop and paste your content into it. Scale and position using the Transform controls. For best results save as a TIFF without compression. Don't forget, always in RGB colorspace.

  • Appointments one hour ahead of appointments created in iCloud - both before *and* after the shift from daylight savings time

    I am in the CET timezone and my Lumia 925 on 8.1 has consistently shown appointments one hour ahead of appointments created in iCloud - both before and after the shift from daylight savings time here.
    My disappointment is compounded by the fact that I patiently waited for October, naïvely thinking the clockchange would solve things... doh.
    Look forward to your earliest solution.
    Jonny.

    There is a separate thread on this subject. It's a bug in Windows Phone 8.1. It is fixed in the upcoming Windows 8.1 Update 1 release (due Nov/Dec 2014). Alternatively, you can install the developer preview (go to Store and search for 'preview for developers'.
    You have to register as a developer though (easily done through appstudio.windows.com) or you can wait for your phone vendor (Microsoft / Nokia) to release the 'Denim' upgrade.
    For now, I don't know a decent workaround.

  • Operation cancelled on SQL Developer still running on the DB

    Using either the SQL Developer 2.1.1.64.39 or .64.45 versions when a DML statement (e.g. SELECT, DELETE, etc.) is executed and few seconds after cancelled before it finishs, the SQL Dev IDE shows as the operationwas cancelled, but it still running at the database level.
    If you try to close the SQL Developer to cancell the operation, you will get a "Connection is currenly busy. Try again?", but you can only chose Abort and wait.
    Regards,
    ASCh

    SQL Developer is certainly not just cancelling statements in the user interface - I can cancel a query that normally takes two minutes to run after five seconds and then immediately run a different query in the same connection and get the results (ie the cancelled query is no longer running in the database).
    You are probably seeing the difference between the UI no longer waiting for the statement to complete and the statement actually completing in the database. Especially with DML the database needs to clean up from the cancelled statement, rolling back changes already made by the statement before it was cancelled. Even selects can allocate temporary space for sorting which would need to be cleaned up on cancelling the select.
    I would not expect closing SQL Developer to do anything more to cancel the statement in the database than it has already done - SQL Developer has already told the database to cancel the statement and it is just taking some time for the database clean up after the cancelled statement.
    theFurryOne

  • I have 4 computers running Adobe CC under two different accounts (as 1 account can only be installed on two computers) i need it on a 5th computer now, do i need another account or can i set up something so all 5 run from the same account making it easier

    I have 4 computers running Adobe CC under two different accounts (as 1 account can only be installed on two computers) i need it on a 5th computer now, do i need another account or can i set up something so all 5 run from the same account making it easier?

    Check into a Team account
    -http://www.adobe.com/products/creativecloud/teams/benefits.html
    -assign a new team member http://forums.adobe.com/thread/1460939?tstart=0 may help
    -Team Installer http://forums.adobe.com/thread/1363686?tstart=0

  • How to make tomcat still running after reboot

    hi all,
    i want ask about how to make tomcat still running after our computer reboot.
    so our server still can serve the the request without we start manualy the tomcat.
    please replies
    thank's before

    *nix or win32 or other?                                                                                                                                                                                                                                           

  • My iMac 27inch screen keeps going black but everything is still running in the background? please help

          My iMac 27inch screen keeps going black but everything is still running in the background? please help. I have read that apple are recalling 27inch iMacs....

    Hello @DesCherryBomb,
    I understand that you are having issues with your HP 2310m monitor going blank and/or flickering. I am providing you with some steps you can try below:
    Step 1. Unplug the power cord from the back of the monitor and the wall
    Step 2. Hold the power button down for at least one minute
    Step 3. Plug the power cord back into the monitor and then into the wall outlet (not a power bar or surge protector)
    Step 4. Press the Menu button on the monitor
    Step 5. Navigate to the Factory Reset option and select it
    If the above steps did not resolve your issue you can try the monitor on a computer or other device to see if the issue persists. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Maybe you are looking for