Can any one tell me the exact procedure of how to update XPERIA NEO V to ICS using both PC companion and SUS.

Can any one tell me the exact procedure of how to update XPERIA NEO V using both PC companion and SUS.
Please provide required link also for SUS and step by step procedure for the same.
It will be really helpful.

SUS http://www.sonymobile.com/global-en/tools/update-service/
You just need to connect your mobile to pc companion follow the onscreen instructions
Use pc companion
http://www.sonymobile.com/global-en/tools/pc-companion/
Discussion guidelines.
Message me or any other moderator to seek help regarding moderation.

Similar Messages

  • Can any one tell me the difference between third party sales & intercompany

    Hai
    can any one tell me the difference between third party sales & intercompany billing
    reg

    Hi,
    In THIRD PARTY, Goods are sent to customer from the Vendor and no Delivery happens from Company Plant
    In THIRD PARTY, We will Pay to the Vendor and Bills Customer.
    In THIRD PARTY, the PR will be generated automatically from the Sales order
    In INTERCOMPANY Process, Goods are sent to customer from the Supplying Company code  to which an order was placed from the Ordering Company code
    In INTERCOMPANY,, Plant of the supplying company code will be assigned to the Ordering Sales Organisation
    In INTERCOMPANY , We Bills the customer and settles to the SUPPLY COMPANY CODE
    We will use two Pricing procedures, One Normal pricing and other is INTERCOMPANY pricing procedure.
    These are the Major differences.
    Please check these and revert back if you need more details
    regards,
    santosh

  • Can any one tell whether the concept which i understood is correct or not

    hai everyone
    iam studying jdbc and this is what i understood about the basic concept .can any one tell whether the concept which i understood is correct or not
    whenever the statement class.forName("driver class") is executed driver class is loaded and registered with drivermanager.Internally drivr class contains a static bloc which contains the following code
    static
    Driver drv=new name of driver class();
    DriverManager.registerDriver(drv);
    whenever the statement class.forName("driver class") is executed,static bloc is executed first and driver class is registerd.
    concept as i understood about DriverManager:
    suppose there may be situations where an application developed in java has to deal with one or several databases and this is accomplished with one or different driver classes.so all these driver classes are to be managed and this is done by DriverManager class and in order to make the driver class itself known to the driver manager we have to register the driver classes with the help of registerDriver() method of DriverManager class because DriverManager is the class which will attempt to load the driver classes into memory..
    If we look at the last statement: DriverManager is the class which will attempt to load the driver classes into memory.Here i have some doubt if DriverManager class loads the driver class after registering the driver class then what does the statement class.forName("driver class") will do which is also used to loaad the driver class.
    what i understood is since the responsibility of loading the class is done by class.forName("driver class") only registering of the driver class is done as the class is alredy loaded.
    help me to clear my confusion
    thanks in advance

    hai everyone
    iam studying jdbc and this is what i understood about
    the basic concept .can any one tell whether the
    concept which i understood is correct or not
    whenever the statement class.forName("driver class")
    is executed driver class is loaded and registered
    with drivermanager.Internally drivr class contains a
    static bloc which contains the following code
    static
    Driver drv=new name of driver class();
    DriverManager.registerDriver(drv);
    }That's supposed to be the case, but there's no way to guarantee that every driver actually has that static init. I don't think I've ever run across one that doesn't, though, so, yes, you're basically correct.
    whenever the statement class.forName("driver class")
    is executed,static bloc is executed first and driver
    class is registerd.When you do Class.forName(), the class is loaded and initialized. Whenever you initialize a class, its static init blocks are executed, yes.
    concept as i understood about
    DriverManager:
    suppose there may be situations where an application
    developed in java has to deal with one or several
    databases and this is accomplished with one or
    different driver classes.so all these driver classes
    are to be managed and this is done by DriverManager
    class and in order to make the driver class itself
    known to the driver manager we have to register the
    driver classes with the help of registerDriver()
    method of DriverManager class because
    DriverManager is the class which will attempt
    to load the driver classes into memory..Except for that last part, yes.
    DM keeps track of loaded drivers, and gives them a chance to parse the connection URL when you call getConnection. DM does NOT load the driver classes into memory, however. That's done when you call Class.forName.
    what i understood is since the responsibility of
    loading the class is done by class.forName("driver
    class") only registering of the driver class is done
    as the class is alredy loaded.Right.

  • Hi Legands, Can any one tell me the link from where i can download ADI

    Hi Legands,
    Can any one tell me the link from where i can download ADI
    Thank's
    Bachan

    Hello Prasanth,
    Try this link for ABAP HR FAQ :
    [SAP ERP Human Capital Management (SAP ERP HCM);
    Good Luck,
    Boaz

  • Can any one tell me the difference between VK11 and MR21

    Hi Folks,
    I have changed price of a material using VK12.
    When I go to the transaction MR21, it is still showing the old price.
    Can any one help what is the difference between VK11 and MR21.
    And i which scenarios these two were used?
    Thanks in Advance
    Gopi Krishna

    Hii,
    VK11: This is price master record to determine the sale price or discounts or freight or taxes which we going to charge to the final customer.  Through this transaction we will determine the price automatically either in sales or billing document.  These transaction is only applicable for sales & distribution module for determining the pricing for customers.
    The price determined through this we use in revenue realisation.
    MR21: Through this trnsaction Finance or Cost users upload the cost of the material.  The cost is
    Standard Cost or Moving average cost.
    Cost= Raw Material CostProcessing Cost(product process cost )Overheads(employee salaries)
    This cost is maintained at each material master in accounting view either standard cost or moving average cost.
    These cost is determined for every material movement within the company.
    Example: Production, transfer posting, goods issue- system post the quantity and at the same time system create an inventory entry i.e accounting entry for the transaction.  In this accounting entries, system consider the values from material master for generating accounting entry.
    If you upload production for 10 MT of material A and in material master if kept the cost of the material as 1000 then the accounting entry in production time as
                  Finish Goods Dr          10000
                            To Cost of Production Cr        10000
    These cost also determined sales transaction through VPRS condition type.
    Rewards if it helps
    Regards
    Goutham

  • Can any one tell a thicky like me me how to get li...

    Sorry to be a thicky but due to my ongoing probs with BT I'd really like to get my line stats - However despite having reset my BT homehub  and using the suggested admin/serial no passwords I keep getting a dialogue box with following message
    ""A user name and password are being requested by http://192.168.1.254. The site says: "SpeedTouch""
    http://192.168.1.254 is the Hubs IP address but I have no idea why its asking for the pword for a modem/router we dont use and (predicatbly) dont know the pwords for..
    Ideas on postcard
    Cathie

    jackster2010 wrote:
    Sorry to be a thicky but due to my ongoing probs with BT I'd really like to get my line stats - However despite having reset my BT homehub  and using the suggested admin/serial no passwords I keep getting a dialogue box with following message
    ""A user name and password are being requested by http://192.168.1.254. The site says: "SpeedTouch""
    It wants a user/password. Are you sure you're entering them correctly ? 
    http://192.168.1.254 is the Hubs IP address but I have no idea why its asking for the pword for a modem/router we dont use and (predicatbly) dont know the pwords for..
    You're trying to get line stats from a router that you don't use ?

  • Can any one Tell me how i write std routine if i dont authorization in VOFM

    Dear Guru ,
    I Have Encountered An Technical Issue while writing routine RV61A943 and RV64A978.
    Using access key I have unlocked above two routine to write Pricing Procedure's Requirement (in RV61A943)  and Formula for Condition Value (in RV64A978) in se38 .
    But when i am trying to make some changes in routine RV61A943 or in routine RV64A978 using  SE38  I am not able to write any code within it.
    So Sir I want to know in which way i have to write the routine -- Using VOFM or  can write using SE38 itself.
    (Initially I tried using VOFM to write the routine in development server  But I found doesnot have authorization of VOFM in development server)
    Can any one tell me the full technical procedure to writing the routine..
    Pls help.
    Thanks & Regards
    Saifur Rahaman

    Hi,
    You need to ask for authorization of VOFM then only u can make changes to routined.
    Reward if useful.
    Regards
    Susheel

  • Can any one tell me difference between 2 dates in days

    hi guys,
    can any one tell me the difference between 2 dates in days
    for eg: input  20.12.2006 and 06.11.2006 will be 34.
    thanks in advance for you answers
    Regards,
    Anil kumar P

    Hi Anil,
    Check this code for u r requirement
    REPORT ZDATEDIFF.
    DATA: EDAYS LIKE VTBBEWE-ATAGE,
    EMONTHS LIKE VTBBEWE-ATAGE,
    EYEARS LIKE VTBBEWE-ATAGE.
    PARAMETERS: FROMDATE LIKE VTBBEWE-DBERVON,
    TODATE LIKE VTBBEWE-DBERBIS DEFAULT SY-DATUM.
    call function 'FIMA_DAYS_AND_MONTHS_AND_YEARS'
    exporting
    i_date_from = FROMDATE
    i_date_to = TODATE
    I_FLG_SEPARATE = ' '
    IMPORTING
    E_DAYS = EDAYS
    E_MONTHS = EMONTHS
    E_YEARS = EYEARS.
    WRITE:/ 'Difference in Days ', EDAYS.
    WRITE:/ 'Difference in Months ', EMONTHS.
    WRITE:/ 'Difference in Years ', EYEARS.
    INITIALIZATION.
    FROMDATE = SY-DATUM - 60.

  • Can any one tell me how can I move to a different folder pictures, that I've cloned, without them staying aggregated? They all come together to the other folder and I don't want that- thanks

    Can any one tell me how can I move to a different folder pictures, that I've cloned, without them staying aggregated? They all come together to the other folder and I don't want that… thanks

    There's more to it than that.
    Folders in Aperture do not hold Images.  They hold Projects and Albums.  You cannot put an Image in a Folder without putting it in a Project or an Album inside that Folder.
    The relationship between Projects and Images is special:  every Image must in a Project, and can be in only one Project.
    Images can be in as many Albums you want.  Putting an Image in an Album does not move it from the Project that holds it.
    You can make as many Versions from a Master as you want.
    What you want to do may appear simple to you, but it still much adhere to how Aperture works.  I still can't tell exactly what you are trying to do (specifically: Images don't live in Folders; moving an Image from a Folder is non-sensical).
    It can be very confusing (and frustrating) to get going with Aperture -- but it does work, and can be enormously helpful.  If you haven't, take a look at the video tutorials on Apple's Aperture support site.
    I feel as though I haven't helped you much -- but we need to be using the same names for interface items in order to get anything done -- and my sense is that you still haven't learned the names of the parts.

  • Can any one tell me how to write the properites files and how to acces

    can any one tell me how to write the properites files and how to acces thoose files
    plz let me no
    thanks in advance

    http://www.exampledepot.com/egs/java.util/Props.html

  • Can any one tell me how to stream the images in flash.

    Hello Friends,
    i have created a dynamic page flip book with xml, i want to
    zoom the images in swf loaded, with streaming, so that user can
    preview the image while a good quality image is loading. I wanna
    know that how to load a part of large image or swf.
    Image effect like :-
    http://www.zoomify.com/
    Can any one tell me how to stream the images in flash.

    On Thu, 17 Apr 2008 05:53:27 +0000 (UTC), "FlashDavil"
    <[email protected]> wrote:
    >I wanna know that how to load a
    >part of large image or swf.
    You show a preview and use loadMovie() to load a big file.
    You can
    create a preloader (progress bar) showing how much part is
    loaded,
    while user sees the small image. When you achieve 100% tou
    show that
    big image. What's more?
    > Can any one tell me how to stream the images in flash.
    What are you talking about is not a "streaming", but
    "progressive
    download". Images "streaming" is impossible.

  • Can any one tell me how to attach a pdf file to the mail through workflow

    I have a smart which i am able  to convert it to a pdf file...now.. can any one tell me how to attach a pdf file to the mail through workflow

    Hi,
    To create the task for attachment
    Use the BOR SELFITEM and method NOTES_APPEND.
    The out come of this task contain a link called attachment with a clip attached. Clisk on that icon and choose the type of attachment u want . RAW , EXCEL , TXT , PDF... Then using the import icon u can attach the document u like.
    But the TYPE : OBJ.
    Similarly using NOTE_DISPLAY method u can display the documents u like.
    In any work item u have the facility to attach any atttchment for further circulation .
    Attchment @ WORKITEM
    1.Click the workitem for which you want to create the attchment
    2.Press create attachment
    3. Add the attachment u like (PDF)
    Reward points for useful answer.
    Richard A

  • Can any one tell me how to remove the 3 buttons at the top of a dialog?

    Hi all
    Can any one tell me how to remove the 3 buttons at the top of a dialog?
    The Close, Minimize and the other I don�t know what you call that one.
    Thanks for you time All
    Have a great day
    Craig

    Try http://java.sun.com/docs/books/tutorial/uiswing/components/frame.html#setDefaultLookAndFeelDecorated

  • Can any one tell me how to include the company logo and some poictures into the Teststand report

    1. Can any one tell me how to include the company logo and some pictures into the Teststand report?
    2. How to include the waveforms into the report?

    http://zone.ni.com/devzone/cda/epd/p/id/3619
    jigg
    CTA, CLA
    teststandhelp.com
    ~Will work for kudos and/or BBQ~

  • Can any one tell me how to change the current row header in FB1LN tcode

    Hi,
    can any one tell me how to change the current row header in FB1LN tcode.
    I want to show input date also in the layout.
    Regards
    Mave

    Hi
    I know two ways:
    - transaction obvu: here you can insert new fields, but only if these fields are included in certain table (like BKPF, BSEG, BSIS.....
    - if your field isn't included in those table, you have to modify the structure RFPOS and manage it in the BTE 1650. After updating RFPOS you have to run the program RFPOSXEXTEND to update the structure RFPOSXEXT.
    Max

Maybe you are looking for