Can anybody help me about a problem of install J2EE on win2000?
I install j2ee 1.3.1 on win2000 advanced server.
When I start j2ee server,an error occured.
starting JMS serverice... then the program quit.
I find some message in log files.
SEVERE Failed to created RMI-IIOP server because: null.
Why ? How should I do?
pls help me
Similar Messages
-
my Numbers file sent to somebody. He is not able to open in Excel can anybody help to solve this problem?
Numbers files are not compatible with MS Excel. To share a Numbers file with Excel you need to export you Numbers file in MS Excel format. To do this:
1) Open you Numbers document
2) select the menu item "File > Export..."
3) select "Excel" for the target output
4) click next and select where to save the file.
5) email the file you saved -
my ipod touch brightness just went to zero after charging it. i've tried adjusting it to 100% but it still does not changed. can anybody help me solve this problem? thankS!
Have yu tried the standard fixes:
- Resetting:
Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restoring the iPOd via iTunes. First from backup and if problem persists, restore to factory defaults/new iPod
- Make an appointment at the Genius Bar of an Apple store since you likely have a hardware problem -
I try to restore my ipod mini 4gb but i get the 1437 error? can anybody help me with this problem?
ok i have had the ipod fr a while and when i try and restore it gives me the 1437 error? i have no clue what this mean, can anybody help me? when is specifys the ipods components like the name and capacity etc.. under capacity it says N/A? get back to me please i miss having an ipod:((
I wish I could offer a solution, because I too am about to go crazy trying to fix the same problem. I have tried everything in the support section, sometimes twice, to no avail. Now I have an empty ipod that won't connect to my computer much less iTunes.
Any suggestions? -
Can Anybody help this "display :0" problem I have? [SOLVED]
Hello, I am very new to Arch (and only on Linux for a year).
I have 2 problems:
Problem #1). When messing around after my install, I'm not sure what I did... but now I have an error every time I boot up and log in. The error is this:
There already appears to be an X server running on display :0.
Should another display number by tried? Answering no will cause
GDM to attempt starting the server on :0 again. (You can change
consoles by pressing Ctrl-Alt-f7 to go to console 7. X servers
usually run on 7 or higher)
Now, I am able to click tty7 and run a regular desktop, and I am able to use tty1, tty2....for root...but I just would like to not have that error.
Problem #2). Well...after prob. #1... I got frustrated and tried to stop the problem by upgrading to the new testing xorg-server and xf86-video-intel... as well as a full pacman -Syu. (I know I shouldn't be using the Testing repo, but since I thought I was going to be doing another clean install, I figured I would give it a try and also see what the new Gnome looks before I scrapped this install)
...well, after doing a new "Xorg -configure", I was able to edit my /etc/X11/xorg.conf so that I got my screen working and my mouse able to move and tap, but I have lost the ability to scroll...and it had been working before Problem #1, and the new upgrades... so, instead of scrapping this install, I would really like to try and fix these 2 problems, because other than that, everything is working nicely.
This is my /etc/X11/corg.conf:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
Option "AIGLX" "true"
Option "Touchpad" "AlwaysCore"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "CorePointer"
Option "Protocol" "ImPS/2"
# Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
Option "Emulate3Buttons" "true"
EndSection
Section "Monitor"
#DisplaySize 330 210 # mm
Identifier "Monitor0"
VendorName "AUO"
ModelName "f0d"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "ColorKey" # <i>
#Option "CacheLines" # <i>
#Option "Dac6Bit" # [<bool>]
#Option "DRI" # [<bool>]
#Option "NoDDC" # [<bool>]
#Option "ShowCache" # [<bool>]
#Option "XvMCSurfaces" # <i>
#Option "PageFlip" # [<bool>]
Identifier "Card0"
Driver "intel"
VendorName "Intel Corporation"
BoardName "Mobile 915GM/GMS/910GML Express Graphics Controller"
BusID "PCI:0:2:0"
Option "XAANoOffscreenPixmaps" "true"
Option "DRI" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Modes "1280x800"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Modes "1280x800"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Modes "1280x800"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Modes "1280x800"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Modes "1280x800"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Modes "1280x800"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "record"
# Load "GLcore"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
Load "dbe"
Load "synaptics"
EndSection
Section "InputDevice"
Identifier "X.org Configured"
Driver "synaptics"
Option "Device" "/dev/input/mouse0"
Option "Protocol" "auto-dev"
Option "LeftEdge" "49"
Option "RightEdge" "900"
Option "TopEdge" "73"
Option "BottomEdge" "666"
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapTime" "180"
Option "MaxTapMove" "200"
Option "VertScrollDelta" "24"
Option "MinSpeed" "0.40"
Option "MaxSpeed" "0.80"
Option "AccelFactor" "0.024"
Option "EdgeMotionMinSpeed" "200"
Option "EdgeMotionMaxSpeed" "200"
Option "CoastingSpeed" "5.00"
Option "FastTaps" "on"
Option "UpDownScrolling" "1"
# Option "CircularScrolling" "1"
# Option "CircScrollDelta" "0.1"
# Option "CircScrollTrigger" "2"
# Option "SendCoreEvents"
Option "SHMConfig" "on"
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Section "DRI"
Group 0
Mode 0666
EndSection
Any help would be cool, thanks,
-j.c.
Last edited by methuselah (2007-10-24 04:12:02)Misfit138 wrote:I've been using GNU/Linux for a couple years, but only for one full year seriously. I am still learning and have oh so very much to learn. I understand how one could get frustrated, give up and reinstall. I did it quite a bit before I adopted the mindset to slow down and start absorbing some knowledge about how things work. I still have issues, and sometimes keeping the thing running is a challenge of itself for me. Anyway, when you are ready to come back and try again, the community will still be here to help. :)
Thank you for understanding... and guess what, I gave Archlinux a third attempt yesterday...and I have a fully working Arch Linux!!
After giving up after my second Arch attempt, I installed xubuntu 7.10 tribe5 and upgraded to the beta.
7.10 felt that it had gotten slower than 7.04 (probably because it's still being worked on)... or maybe I had seen how fast Arch was.
I liked the new look of xubuntu 7.10, and it was very easy to install and add all of my special hacks to make it faster (most of them from this sidux page: http://sidux.com/PNphpBB2-viewtopic-t-3484-start-0.html ).
But even with my OpenDNS and everything else that I do from that page, as well as all of my Swiftfox about:config tweaks, I still felt that it was slower than Arch had been.
So then I started trying to install Compiz Fusion like the way I had it in feisty 7.04: http://forum.compiz-fusion.org/showthread.php?t=4159
... but for some reason, the Compiz Fusion in the gutsy repos didn't work with xubuntu 7.10, and I couldn't find a gutsy repo like Trevino's repo for feisty...and yes, I guess I could of built it from source, but I just decide to give the Xfce4 Compositer a test run... and I found my xubuntu 7.10 crawling slower than it had been with Compiz Fusion on 7.04.
Then I decide to give Arch one more chance since there wasn't going to be a Trevino repo for little (and I didn't feel like building Compiz and all of the plugins from source)....plus, I figured now that I had learned how to properly install Arch, that if I gave it a moment after install, I would learn how to configure everything to work correctly.
And now for the success story.....
The first thing I did was to download and burn the newest 2007.08-2, then I did the regular base install, and then I took a chance to see if I could get the new Gnome and Xorg working off of a clean install, so I uncommented the testing repos before doing my first pacman -Syu... then I also installed the new xf86-video-intel driver that I had had problems with... and for my first time on Linux (one year now), I didn't install xfce4.
So, after editing my xorg.conf after Xorg --configure, everything (including scrolling) worked, well everything except for my Caps Lock key light, like everybody else on this very helpful page: http://bbs.archlinux.org/viewtopic.php?id=37670&p=1
So this is my working xorg.conf for my Intel 910GML celeron m HP pavilion dv4230us laptop:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Touchpad" "CorePointer"
InputDevice "Mouse0" "SendCoreEvents"
InputDevice "Keyboard0" "CoreKeyboard"
Option "AIGLX" "true"
# Option "Touchpad" "SendCoreEvents"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "xtrap"
Load "extmod"
Load "dbe"
Load "record"
Load "dri"
Load "freetype"
Load "type1"
Load "glx"
Load "int10"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "vbe"
Load "synaptics"
# Load "GLcore"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XkbRules" "xorg"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "CorePointer"
# Option "Protocol" "ImPS/2"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "Monitor"
#DisplaySize 330 210 # mm
Identifier "Monitor0"
VendorName "AUO"
ModelName "f0d"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "ColorKey" # <i>
#Option "CacheLines" # <i>
#Option "Dac6Bit" # [<bool>]
#Option "DRI" # [<bool>]
#Option "NoDDC" # [<bool>]
#Option "ShowCache" # [<bool>]
#Option "XvMCSurfaces" # <i>
#Option "PageFlip" # [<bool>]
Identifier "Card0"
Driver "intel"
VendorName "Intel Corporation"
BoardName "Mobile 915GM/GMS/910GML Express Graphics Controller"
BusID "PCI:0:2:0"
Option "XAANoOffscreenPixmaps" "true"
Option "DRI" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
modes "1280x800"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
modes "1280x800"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
modes "1280x800"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
modes "1280x800"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
modes "1280x800"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
modes "1280x800"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "InputDevice"
Identifier "Touchpad"
Driver "synaptics"
Option "Device" "/dev/input/mouse0"
Option "Protocol" "auto-dev"
Option "LeftEdge" "49"
Option "RightEdge" "900"
Option "TopEdge" "73"
Option "BottomEdge" "666"
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapTime" "180"
Option "MaxTapMove" "200"
Option "VertScrollDelta" "24"
Option "MinSpeed" "0.40"
Option "MaxSpeed" "0.80"
Option "AccelFactor" "0.024"
Option "EdgeMotionMinSpeed" "200"
Option "EdgeMotionMaxSpeed" "200"
Option "CoastingSpeed" "5.00"
Option "FastTaps" "on"
Option "UpDownScrolling" "1"
# Option "CircularScrolling" "1"
# Option "CircScrollDelta" "0.1"
# Option "CircScrollTrigger" "2"
# Option "SendCoreEvents"
Option "SHMConfig" "on"
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Section "DRI"
Group 0
Mode 0666
EndSection
So after getting my mouse to work properly, I had done a lot of research about OpenDNS and Arch, but I hadn't found an easy way to do it in any forum or google search... then, I found a way on my own that works perfectly for me.
What I did was I added the package called Wicd: http://wiki.archlinux.org/index.php/Wicd for my BCM43XX wireless, and after using this Wireless guide: http://wiki.archlinux.org/index.php/Wir … k_settings to configure my eht1, I then added a "Wired" profile to my Wicd.
...With my Wired Network Profile in Wicd called "OpenDNS", using the proper OpenDNS nameservers, all I have to do when I first boot up is connect my "OpenDNS" profile, and I am able to use OpenDNS and pass all of it's OpenDNS checks: http://www.opendns.com/welcome/
Now I haven't tried to install Compiz Fusion yet, and I almost don't need it except for the Shift Switcher and Emerald... so I might wait a while.
And to finish my long-winded success story, I would just say that the GDM issue was something I caused on my own, and couldn't correct on my own, and had nothing to do with Archlinux...and the new Xorg/ xf86 intel issue that I had was easily solved once I payed attention to making sure that the "Input Device" was correct for the Touchpad like on this post: http://bbs.archlinux.org/viewtopic.php?id=37670&p=1
As for, OpenDNS... I'm sure there are other way's to do it, but this way worked for me, and I found the solution on my own, so I'm sort of proud of that... and I'll be messing around with Compiz Fusion soon, but I'm not that worried about it.
Anyway, here is my new Archlinux Desktop using my own gtk-2.0 theme and custom icons:
Large View: http://i144.photobucket.com/albums/r161 … ot-1-1.png
Large View: http://i144.photobucket.com/albums/r161 … shot-2.png
Last edited by methuselah (2007-10-09 17:23:49) -
whatever i try my MacbookPro reverts back to GMT which is two hours ahead from where i live in spain. manual time setting helps for MacBookPro but in synchronization of iPad it uses again GMT. Can anybody help me with this problem? Thank you
No, the app does not have to completely restart. It gets shifted in its open state into storage. Similar to how a computer uses the hard disk when it has insufficient memory.
What complicates things is that sometimes memory does not get returned for reuse when you close an app. Thus yo should periodically double click the Home button and "delete" unnecessary apps from the multitasking dock and power off and then back on the iPod. -
About three days ago my ipod said i needed to sync and so i did . when i did it stop working and the wifi is grey out and says no wifi . Ive tried rebooting it , reseting , restarting but nothing seems to work . Can anybody help me ? Please !
Hello Philly,
I believe that when you reset your ipod(command given from the computer, right?) touch WHILE the ipod was updating, It cleared the system in the middle of writing files, thus corrupting(equivalent of cutting of in the middle of a sentence) the basic running system.
I suggest you go to an apple store and ask for a technical diagonosis in person. they may offer to help if the problem is fixable. If your ipod is still under warrenty, i would guess it would be free/low cost.
~Remember, I am just giving an educated guess on limited information -
I cannot open iCal because of a problem. Can anybody help me? The computer will not allow it to open and sends a message to apple each time. The icon has gone from the dock, but ical works on my iPad and I am afraid to sync it with my computer in case it wipes everything .
I have the exact same problem. I have not changed anything. This is probably a bug or something that has gone bad with Mac OS X (10.7.2). I have not found any solution for this on the web.
MacBook Pro, Mac OS X (10.7.2). -
Hi can anybody help please. I am having terrible problems trying to use my Nikon D7100 to tether. I have downloaded the latest Lightroom updates and also checked my firmware which is also the latest avaiable and still Lightroom wont detect my camera!. When I use a friends Canon camera it works every time!
Hi Keith thanks for your reply I have Lightroom 5.7.1 64 bit and my Nikon's firmware is version 1.02
-
Having big problems with my new Mac Pro, when I launch Photoshop CC, I get an error message, can carry on but after a few tasks it starts going gar... menus go blank, when you try to save it shows a blank box.... can anybody help?
when I launch Photoshop CC, I get an error message
and what exactly is the text of that error message? -
Hello everybody> my itunes has stopped working and the problem report stated the following:
Problem signature:
Problem Event Name: APPCRASH
Application Name: iTunes.exe
Application Version: 10.5.3.3
Application Timestamp: 4f14cc3d
Fault Module Name: KERNELBASE.dll
Fault Module Version: 6.1.7601.17514
Fault Module Timestamp: 4ce7b8f0
Exception Code: 80000003
Exception Offset: 0003381b
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
can anybody help me?Are you seeing a similar message when launching QuickTime Player?
What security software is installed on the computer? Have you tried testing in an admin account or after uninstalling tthe security software?
Use one of the following articles to guide you through removing iTunes and the related QuickTime files.
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7 -
Have performed software restore and still I am unable to turn my wifi on as the option to turn on is greyed out???
Can anybody help?.If no change after restoring the iPhone with iTunes as a new iPhone or not from the backup, make an appointment at an Apple Store if there is one nearby since this is a hardware problem.
-
i bought an new ipad 3rd gen 16 gb wifi cellular in may 2012. I hv a unique problem wherein the screen of ipad is not as smooth as what is general experience. Its not buggy but lacks smoothness and finger doesnot glide as smoothly .Can anybody help.
Do you clean your iPad screen? Do not use standard window cleaners, with ammonia or alcohol, like Windex, but a damp towel, followed by a micro-fibre cloth is recommended. There are also cleaners you can buy which are specifically designed for iPad/iPhone devices, such as iClean from Monster.
-
I'm still having problems downloading. Can anybody help? Everytime I try yo download, it's saying my Adobe Flash CS4 won't download.
UP%20%26 COMIN' what specific error message do you receive when you try to download the Creative Suite 4 installation files? Which Creative Suite 4 title are you downloading? Are you downloading the installation files from https://helpx.adobe.com/creative-suite/kb/cs4-product-downloads.html?
-
Here is my problem: "To open "Adobe Photoshop CS5.1" you need to install the legacy Java SE 6 RUNTIME" after upgrading iMac to Yosemite, can anybody help?
This answer may be somewhat late, but just in case other have the same issues, I went to site listed below and it solved the problem. No need to reinstall CS5 product. I hope this works for you.
http://support.apple.com/kb/DL1572
Maybe you are looking for
-
I am trying, for some time now, to implement some sort of bank application that uses DBs to store customers. I have been trying to improve my code, the results are interesting since while studing more I saw that the previous code was.....not so good.
-
Adobe air for samsung galaxy tab3
Please could some one help? I have looked on trouble shoot page, which i have found too technical. Each time I have tried to download get message error 24. Help and advice in easy steps please?
-
Hi, I need to know the tables/function modules to get the list of COMPONENTS for any configurable material with class type Variants. Example: I have a material CMAT with components SFP and MFP, I can see those entries using MM03 under Classificatio
-
Orientation changes, even when locked iOS 7.1.2
I have my iPad mini locked in portrait view, onthe pull up setting (not the side button). Since the latest iOS update to 7.1.2 it switches to landscape on its own, and I need to reset it constantly. Is anyone else experiencing this that can tell me h
-
Hello, A few days ago my computer lost sound capabilities. All sounds, including system sounds (beeps). One day it was gone. I have a Probook 5320m upgraded to Win-8 (yes, I know: "Not supported"). Well everything has been working fine for months unt