Can anyone explain about "Stub day", "Stub Amout" in Leasing (OKL)?

Can anyone explain about "Stub day", "Stub Amout" in Leasing (OKL)? I don't understand "Stub day", "Stub Amout"

They both used to change payment date.
STUB_DAYS : Number of days offset from the contract start date or previous payment line.
STUB_AMOUNT : Amount of rent to cover the Stub Days
Information is stored in OKL_CASH_FLOW_LEVELS
Hopefully this answers.
Regards,
Bilal Sarioz

Similar Messages

Can anyone Explain about Data conversion for Material master In SAP MM

Can anyone Explain about Data conversion for Material master, Vendor In SAP MM
Thanks

Hi,
Refer following link;
[Data Migration Methodology|http://christian.bergeron.voila.net/DC_Guide/Data_Migration_Methodology_for_SAP_V01a.doc]

Can anyone explain about complex scenerio's while desinging Reports & Universes

Post Author: [email protected]
CA Forum: Desktop Intelligence Reporting
Hi all,
can anyone explain about complex scenerio's while desinging Reports & Universes.
if possible explain with examples.
Thanks & Regards,
Madhu.

Hi Etteloc,
Welcome to the community and thanks for posting!
I'm sorry that your Mum's telephone service has developed a fault and also for the length of time this has taken to sort out. I completely understand the circumstances and how vital it is for her to have a working telephone service.
No need to worry as I can get things sorted from here. Click on my username and under the section "about me" you'll see the link to get in touch with us. Please include the link to this thread when you complete the form.
Once completed, post back with something along the lines of "details sent" (without pasting the reference number) and I'll arrange for it to be picked up as soon as possible.
Thanks a million,
Robbie
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Can anyone explain what the other section section in the HDD usage description is for ? I recently used iphoto to send a mail and this "other "section inrease the usage by about 1GB....any ideas why ?

Can anyone explain what the "other" (yellow colour) section in the HDD usage description is for and what it does.It is under the about this mac section and storage option?
I recently used iphoto to send mail with photos attached and this "other" section increased by about 1GB. The mail size was around 900KB.....any ideas ?

Shurig wrote:
Thanks gor replying,,,this is my first time on this site.
Any idea why the "other" continues to increase. I have just got got my mac so no new apps installed yet only been using it for mail and web browsing. I tried the iphoto mail last night and noticed the the "other" section had increased by 1GB which I thought was rather larger. Do you know what this setion actually does ?
Also do you know if it is possible to delete the iphoto emails.
All of your 'stuff' that is not Music Movies Apps Backups or Photos is in Other, that means all your emails, all your files etc, why don't you just leave well enough alone, this is not windows and doesn't need tinkering with,

Hi Folks, Can anyone explain me about below outputs

Hi Folks, Can anyone explain me about below outputs
sh processes cpu-hog
Process:      ssm4ge_cfg_poll_thread, NUMHOG: 7, MAXHOG: 4100, LASTHOG: 790
LASTHOG At:   15:21:47 UTC Apr 20 2013
PC:           10ee46b
Traceback:    1101e6d 1102227 10eeb8d c7fb5b c9301e c8d7c5 c91486
              c93e55 c7f89a 11509f
Process:      fover_FSM_thread, NUMHOG: 1, MAXHOG: 325, LASTHOG: 330
LASTHOG At:   15:21:51 UTC Apr 20 2013
PC:           10ee46b
Traceback:    1101d4a 110247f 10eec1f c7fb08 c92fee c8d735 c8d87a
              c8fdad c92c29 c931a4 c78c03 c7e166 ad7440 671bc1

Hello Ashish,
Each process on the ASA should take the CPU for a period of time (while its being processed by the ASA).
When a process does not release the CPU is when a CPU Hog is triggered,
In this case you can see 2 proceses that hold the CPU longer than they should ( you should see a cpu hog threshold value)
In this case the first process has holded the CPU for 7 times ( the longest time being 4100 miliseconds)
Remember to rate all of the helpful posts.
For this community that's as important as a thanks

Can anyone explain me in detail about LSMW?:

Can anyone explain me in detail about LSMW?How the process of migration takes place from Non-sap to SAP in flat files?

Hi,
http://sap.niraj.tripod.com/id61.html
Pl. check this site, useful one.
Regards,
Senthilkumar SD

My G4 desktop won't cold start. I have to plug in to the outlet for about 15 minutes every time. Can anyone explain why?

My G4 desktop won't cold start. I have to plug in to the outlet for about 15 minutes every time. Can anyone explain why? Otherwise, the desktop runs fine.
The battery is new, and I zapped the little button on the main board once. I've noticed that the power supply plug is a little longer than the usual one for G4, and the AGP slot has an extra slot, which is black and about half inch long.

Hi Ursula,
the AGP slot has an extra slot, which is black and about half inch long.
I believe that is for ADC Monitor power if you had one, or a card with ADC, like the little tab on this one...
I think your startup problem is bad capacitors in the power supply or on the logic board, and the need to bleed off their charge before they work right to start.

I keep getting an error message when downloading a new app which states " Zinio and 5 other apps cannot be purchased at this time" and then it let's me purchase the app that I was looking at? Can anyone explain that?

I keep getting an error message when downloading a new app which states " Zinio and 5 other apps cannot be purchased at this time" and then it let's me purchase the app that I was looking at? Can anyone explain that?

apple_master New Delhi, India
This solved my questionRe: Unable to Purchase
Apr 16, 2012 10:22 PM (in response to eight4seven)
This worked for someone
I had this problem for about six weeks. I was following this forum but was too unsure of what might happen to try the fixes that were suggested.
About two weeks ago I decided to delete the downloads.28.sqlitedb file (usingDiskAid(a free program), on a PC running Windows 7). The original downloads.28.sqlitedb was 936 KB. The new one that the system created is 80 Kb., and has stayed at about that size. After about four days I also deleted all the other contents of the Download folder. Ten days later and still no more problems. Downloads are much quicker, nothing greys-out (as was happening frequently before).
Everything has worked well since with no more error messages.
I am using an iPod 4G, iOS 5.1 (originally iOS 5.0). I do not have a manifest file, and as far as I know, have not had one. DiskAid can search the whole "hard drive" on the iPod.
Deleting downloads.28.sqlitedb and the contents of Downloads worked for me.

Can anyone explain this ADVANCED problem?

I created a RAM disk on my Performa 6360 (running OS 9.1 136MB RAM) one day and after I rebooted the Mac was not bootable. I did the following to get it to boot, none of which worked.
1. Booted with extensions off
2. Booted with the OS 9.x, OS 8.5, OS 8.1, and TTP CD-ROMS
3. Booted with a Zip disk
Nothing worked and the Mac was not bootable. I believe I also tried clearing the PRAM and still the mac was not bootable.
The solution however was to boot from a floppy created with the OS 8.1 CD-ROM some time ago, trash the memory prefs and bang the mac was back and working.
Can anyone explain why my Mac behaved the way it did in reponse to creating the RAM disk, and why the floppy was the only solution to get it back up and running?
No mac expert (or those claiming to be experts) have been able to explain why the Mac behaved like this.
John

John
You mentioned 136MB of physical(?) RAM in the Performa, and OS 9.1 (about 55MB needed), but not the size of the RAM Disk. Was VM enabled also, and how much? RAM Disk allocation is part of the System reservation of RAM (which you can see in About This Computer after restarting). If the RAM were in excess of 80MB (I know. I know. But I have used RAM Disks as big as 300MB on my 9500, which has 1GB of RAM.) the System might not have been able to shoehorn itself in at System heap allocation time. Why no message? Possibly because the system (Start Manager and friends) hadn't reached a point where they had voices. The foregoing all happens at system test time, long before OS load time.
It is also odd that resetting PRAM did not abolish the RAM Disk, unless your backup battery is failing (at 3.3V or less in circuit). Shut Down of desktop machines is usually preceded by the warning that the contents of a RAM Disk will be lost, even though the memory allocation will be made again at the next startup. 'Persistent RAM Disk' is usually available only in PBs—which save the RAM Disk's contents to the HDD, and reload them to the RAM Disk's memory plot at Startup—for good reason. Your eventual solution perhaps holds a key, ie corrupt (and bizarrely so) Memory Preferences.
Disk Tools floppies are sometimes worth their weight in any scarce commodity that you may wish to name. Only last night I was saved by the floppy for System 7.5.3 after I had unthinkingly put a pure PPC extension into the 7.5.5 System folder on my IIci. The Mac would not find its HDD, to boot from, or to mount it when I tried to boot from a 7.5.3 CD or an external HDD with 7.6.1. When I had trashed the extension, all was sweetness and light again. Floppies one. Christians nil.

Strange Parameter behavior - can anyone explain or enlighten?

I have 27 Crystral Reports that are fed data through 27 SQL Stored Procedures. Recently my boss had me add two more parameters to all 27 Procedures and update the Crystal Reports. I went through all 27 Reports, ran the Set Datasource Location and Verify Database function in the Crystal Designer, and then tested all the reports. 24 of the 27 ran fine, but 4 of them came back with "Database Connector Error" problems. I spent two days trying to debug this problem with no luck - even though the reports Verify correctly, and Preview perfectly in the Designer, when I ran them through our .NET (WinForms) app, these 4 continued to give Database Connector Errors.
I then stumbled on a fix.... Normally every one of the 27 SQL Stored Procedures takes these parameters just as they appear here...
@ImportCompanyNm as varchar(100),
@ImportProjectNm as varchar(100),
@ImportId int,
@ImportTypeNm as varChar(100),
@ImportType int,
@FileType nvarchar(2000),
@DateTo datetime,
@DateFrom datetime,
@ImpDateTo datetime,
@ImpDateFrom datetime,
@Passphrase as varchar(20)
Once again, 24 of the 27 reports run fine with the SQL this way. Notice the final 3 parameters, @ImpDateTo and @ImpDateFrom are the 2 new parameters added, and @Passphrase has been there for a year or more. However, I was able to fix the bug by doing this in 4 of the 27 Procedures.
@ImportCompanyNm as varchar(100),
@ImportProjectNm as varchar(100),
@ImportId int,
@ImportTypeNm as varChar(100),
@ImportType int,
@FileType nvarchar(2000),
@DateTo datetime,
@DateFrom datetime,
@Passphrase as varchar(20),
@ImpDateTo datetime,
@ImpDateFrom datetime
Notice that I just moved @Passphrase, two lines up - thats it. Once I did that, the 4 problem reports run fine. NO Database Connector Error!
Can anyone explain this to me? Every single one of the other 24 reports runs just fine with the parameters as shown in the first block above - but the problem 4 will not run unless I move @Passphrase up two lines.
Why is this? I thought the order of Parameters does not matter - and why would it matter in 4 of 27 reports, but not in the 23 others???
This makes me very nervous about Crystal and what it is doing behind the scenes. Can anyone shed some light here?

Hi Bruce,
OK here goes.... And sorry if I miss anything or not clear.
In MS SQL Server 7 Microsoft had a native Client and CR used p2ssql.dll which is our native DB driver to connect to MS's native client engine. MS SQL 2000 did not support native DB connections using their client engine so CR stopped shipping p2ssql.dll and only supported connectivity through MDAC, OLE DB and ODBC clients. As you know MDAC was installed by default. MS SQL Server ( native ) now shows up in CR Database Explorer again because of this new Native client. In the back end though it's using our native crdb_ado.dll in this case.
As noted now that 2005 enhanced their client engine which is now known as the "Native SQL Server" it uses a new set of Native API's which can be used to connect in either OLE dB or ODBC mode. Because this is "new" the way our OLE DB Driver works is depending on the client we are connecting to and therefore which CR subroutines are being called. So although you are using OLE DB in the client, the low level API's being called in our driver are a new set of routines.
These are the ones responsible for indexing the Tables, Fields, Store Procedures and their Parameters. Our OLE DB driver is dynamic, meaning we query the client for connection info and other info including Store Procedure Parameters. The order they are returned in is the order CR expects them to be in, CR keeps a copy of the database structure in the RPT file. For speed we use indexing and not names, this may explain why it works if you change the order. It may be that the new parameter was added in that order or the client is ordering them before sending them to CR to use and dynamically populate the list in CR Designer. In this case it appears something is not being returned to CR or CR does not have logic to handle this type of change.
In either case I will discuss this with the Report Design team to see if anyone else has noticed this and ask them to test and if it is reproducible I'll have R&D fix this if it's our issue.
Hope this is understood and explain why?
Thanks agian
Don

Can anyone explain what the 'other' storage consists of and how I can decrease the size please?

Can anyone explain what the 'other' storage consists of and how I can decrease the size please?

Welcome to Apple Support Communities
"Other" refers to OS X files, caches, downloads, documents. See Other in this website > http://pondini.org/OSX/LionStorage.html
I would not worry about Other because they contain files that you need, but if you want to decrease the size, start deleting downloads and documents

Can anyone explain what consume() actrually does?

Can anyone explain what consume() actually does as it relates to a KeyEvent?
I read about this but I just can't seem to to understand it.
Thanks in advance.

Yes I read your reply. Your reply though, simply copied the text from the documentation which I already stated I did not understand. I was looking for a clearer explaination.

Can anyone explain me concept of Recursion?

Hi All,
Im struggling for understanding the concept of Recursion from past many days . can anyone please explain me how it works with the below example.
public class Permutation {
     * @param args the command line arguments
     public static String name;
    public static void main(String[] args)throws Exception {
    DataInputStream dis=new DataInputStream(System.in);
    name=dis.readLine();
    permutation("", name);
    private static void permutation(String prefix,String str){
        int n=str.length();
        if(n==0){
            System.out.println(prefix);
        }else{
            for (int i = 0; i < str.length(); i++) {
             permutation(prefix+str.charAt(i),str.substring(0, i)+str.substring(i+1, n) );
    }Thanks and Regards,
Mahesh M
Edited by: Mahesh M on 13 Feb, 2013 7:31 AM
Edited by: EJP on 13/02/2013 20:25: revised your bizarre formatting to use {noformat}{noformat} tags: please use them.

For help with recursion, see this question: Can anyone explain me concept of Recursion?

Can ANYONE explain this IDIOCY?

If I have an IFieldObject or ITextObject with the default height of 221 twips for an Arial 8.25pt or Tahoma Bold 8.25 font.
Why is that a IBoxObject where I set the Top the same as my IField or ITextObject and set the bottom to the Top + 221 twips, the bottoms DON'T LINE UP. Aren't they all 221 twips in height, right?
Same goes with the width...It befuddles me to work in this designer and not have things equal. Also, why in the world would they not give the IBoxObject a HEIGTH property?
How wide is the crSingleLine? 20 twips? I understand that when you set the border the actual height/width grows but the values don't reflect it, is that true?
Can anyone explain the idocy of the measurements and drawing elements in this, used to be good but now is a piece of crap, product? Is there any documentation on this "feature" anywhere? I can't find anything about this in the user guides or help. I'm using 10.2.3600 (sp1) in VS.Net2005 (w/VB.net)

I have deleted the last reply because of the language used in it. I am also locking this thread so no more replies can be added to it.
If you want to get replies to your postings please follow the rules of engagement: https://wiki.sdn.sap.com/wiki/x/FgQ
Be professional, polite, and give us information we need to help you. Remember "us" is not just SAP but all of us in the forum community. Someone other then an SAP engineer may help you, just like you may one time elect help another community member's posting.
Please feel free to repost your questions in this forum following the "Rules of Engagement". Not following these rules will get postings deleted or ignored.
Kind Regards,
Trevor Dubinsky
Senior Engineer,
SAP, Business Objects.

Can anyone explain to me why some of my photos are landing in events and others are appearing only in photo stream?

I want to delete photos from camera roll on my iPhone to clear space to install ios7 but after importing photos to iPhoto on my macbook pro only 4 out of 339 photos taken in September landed in events, though all 339 are in Sept photo stream. It seems like on previous uploads all photos "fell" into events according to the day they were taken, as well as into photostream. I want to make sure these photos stick around permanently and do not exist only in photo stream where I imagine they will eventually be bumped from my computer (photostream). Can anyone explain why some of my photos are landing in events and others are appearing only in photo stream?

You have uploaded two different things - pHotos are in one and only one event - if you have the same photo in two different events then you have imported it twice
Please explain what you want - your initial question and yoru current comments are 180 degrees apart
You say they are not all in events
Can anyone explain to me why some of my photos are landing in events and others are appearing only in photo stream?
Now you say they are
All 15 pics appear in Sept 2013 PS
It sound to me like you have no problem except you imported some photos twice adn you may not understand how the automatic import form PS works - but that is not clear
you can choose to have all of your My Photo Stream photos automatically downloaded. In iPhoto or Aperture preferences on your Mac, to select Photo Stream > My Photo Stream > Automatic Import. All of your photo stream photos will be imported into your Events, Projects, Photos, Faces, and Places folders in iPhoto or Aperture.
The event they are imported into is MMMM YYYY PS
If you import via iTunes sync or by connecting your IOS device via USB then they are importeed into the regular event structrue as defined in your iphoto preferences - and if you imoport via two or more different methods you will ahe duplicates
LN

Can anyone explain about "Stub day", "Stub Amout" in Leasing (OKL)?

Similar Messages

Maybe you are looking for