Can anyone give step-by-step instructions for moving my iPhoto library to my external hard drive to free up space on my internal hard drive?
I want to move my iPhoto from my internal hard drive to an external hard drive to free up space. Can it be moved entirely and function the same as before with all features and the software itself on the hard drive? Also, can anyone give step by step instructions on how to do this? I'm having a difficult time figuring this out on my own by trying to search through Apple support.
Oops...
Here you go...
iPhoto: How to move the Library to an EHD
Make sure that the EXT Drive is formatted as Mac OS Extended (journaled).
That's what iPhoto Likes...
Similar Messages
-
As per Apple instructions, I moved my iPhoto library to an external hard drive so that I could free up space on my full iMac. However, I was not told the last step in the process -- How do I get the iPhoto library off my iMac so I free up that memory?
And after deleting the old Library, you should start up iPhoto while holding down the Option key in order to force iPhoto to let you select your iPhoto Library that is on your external hard drive. If you start up iPhoto the usual way, it will just create a new, blank iPhoto Library in your /users/yourusername/Pictures folder on your iMac's internal hard drive.
-
Can anyone give a good contact number for someone in the upper level of customer service
can anyone give a good contact number for someone in the upper level of customer care i have talked to two of the worst people from customer service, the "supervisor" who was very appropriate did give me a address to mail a complaint which i will but being a disabled veteran of the Iraq war and a member of the wounded warrior project i get upset at certain people who show no respect for the average person and even worse of an attitude to those injured serving their country. I'm in no way saying I'm better its just that i expect a grain of respect as a person, a fellow American working everyday just to get by. my issue was not an impossible issue to resolve but i was told by one rep that it was not possible after my call being "dropped" i called back and talked to another. Luke from call center Washington state told me it was possible but that the phone i ordered two days prior (that rep failed to finish the order)was no longer available and i could pick a different phone not on back order.......i mentioned my confusion to the lack of service and being told two separate things. i asked why this was when i was not the one who made the mistake he told me it was not there fault and pushed the blame to me....he then called me dude and started to speak over me. when i asked to speak to a supervisor he asked why i told him i was no longer interested in talking to him he said why, i asked to be transferred again he kept refusing saying listen man I'm trying to help you what do you want. i asked to speak to his supervisor at least three more times he refused. i asked for his employee information so i could call back to report his rude behavior he refused to give me anything except at the end he finally told me his name.. there is more but my hand is tired is there anyone who can help me? if i find an answer as i will be posting this to many sites i will post it here.
Hello hazzard0011, I want to first and foremost say we truly appreciate your hard work and dedication to our country. It is our commitment to provide a top notch customer experience. My apologies that this hasn't been the case in your recent interactions. We can definitely submit feedback to our upper leadership regarding the matter. Can you please send us a direct message so that we can further investigate? Also, please share details regarding the initial issue. Here's steps to send a direct message: http://vz.to/1b8XnPy
WiltonA_VZW
VZW Support
Follow us on twitter @VZWSupport -
Can anyone give a good contact number for someone in the upper level of customer care
Duplicate post - please see:
can anyone give a good contact number for someone in the upper level of customer service
Message was edited by: Admin ModeratorHello hazzard0011, I want to first and foremost say we truly appreciate your hard work and dedication to our country. It is our commitment to provide a top notch customer experience. My apologies that this hasn't been the case in your recent interactions. We can definitely submit feedback to our upper leadership regarding the matter. Can you please send us a direct message so that we can further investigate? Also, please share details regarding the initial issue. Here's steps to send a direct message: http://vz.to/1b8XnPy
WiltonA_VZW
VZW Support
Follow us on twitter @VZWSupport -
Can anyone give me user exit name for create/update purchase order partners
Hello guys
Can anyone gives me user exit name for create/update purchase order partners?
Requirement is to insert/update partner when SC flag is checked while creating/updating purchase order (ME22N / ME21N) by using user exit.hi,
check these exits.
Transaction Code - ME21N Create Purchase Order
Enhancement/ Business Add-in Description
Enhancement
MEQUERY1 Enhancement to Document Overview ME21N/ME51N
MEVME001 WE default quantity calc. and over/ underdelivery tolerance
MM06E001 User exits for EDI inbound and outbound purchasing documents
MM06E003 Number range and document number
MM06E004 Control import data screens in purchase order
MM06E005 Customer fields in purchasing document
MM06E007 Change document for requisitions upon conversion into PO
MM06E008 Monitoring of contr. target value in case of release orders
MM06E009 Relevant texts for "Texts exist" indicator
MM06E010 Field selection for vendor address
MMAL0001 ALE source list distribution: Outbound processing
MMAL0002 ALE source list distribution: Inbound processing
MMAL0003 ALE purcasing info record distribution: Outbound processing
MMAL0004 ALE purchasing info record distribution: Inbound processing
MMDA0001 Default delivery addresses
MMFAB001 User exit for generation of release order
MRFLB001 Control Items for Contract Release Order
MELAB001 Gen. forecast delivery schedules: Transfer schedule implem.
AMPL0001 User subscreen for additional data on AMPL
LMEDR001 Enhancements to print program
LMELA002 Adopt batch no. from shipping notification when posting a GR
LMELA010 Inbound shipping notification: Transfer item data from IDOC
LMEQR001 User exit for source determination
LMEXF001 Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001 Customer-Specific Source Determination in Retail
M06B0001 Role determination for purchase requisition release
M06B0002 Changes to comm. structure for purchase requisition release
MEFLD004 Determine earliest delivery date f. check w. GR (only PO)
MEETA001 Define schedule line type (backlog, immed. req., preview)
ME590001 Grouping of requsitions for PO split in ME59
M06E0005 Role determination for release of purchasing documents
M06E0004 Changes to communication structure for release purch. doc.
M06B0005 Changes to comm. structure for overall release of requisn.
M06B0004 Number range and document number
M06B0003 Number range and document number -
Can anyone give me a bean class for JAVAMAIL, for using in JSP?
Can anyone give me a bean class for JAVAMAIL, for using in JSP?
I hate coding everything inside a jsp page!! Anyone out there who can help me out??hi
see my post in the javamail forum... here you can see a bean.. I'm trying to connect it with the mysql database - may you can help me -
Can anyone give me the process flow for MTBF report?
hi all
can anyone give me the process flow of MTBF Report?
regards
ashaAnd Full form of MTBF is ???
Regards
Amitava -
Anyone else had this problem? Anyone know how to fix it?
I haven't deleted my photos of my computer's hard drive yet so can go back to using that if it will fix my problem
ThanksNo that is not a problem and no one has reported it here
to change the library depress the option key and launch iPhoto and use the select library command - see if the behavior is the same on both frives
How did you move the iPhoto library to the external drive?
What format is the external drive?
LN -
Can anyone give me the steps for moving the repository databases in 9.3.0?
We are in the 9.3.0 environment and I need to move the four repository databases for essbase, biplus and webanalysis/workspace to a new machine. I tested moving the databases and rerunning the config util, but I lost my sample reports I created earlier. Does anyone have a step by step procedure for moving the repositories?
Thanks,
-C.If you are moving reports why don't you bulk export them from workspace and then import them into your target.
Are you talking about migrating the repository across different shared services environments, if so then I doubt you will have much luck with trying to migrate the workspace repository as it pretty tied in with shared services.
Cheers
John
http://john-goodwin.blogspot.com/ -
I would like step by step help for transfering my photos from my IMAC to my MACBOOK .They both have same operating systemas well as same version 10.6.8
ThanksCopy them to a disk/external drive/flash drive ro any other medium and then copy them to the other computer.
Or e-mail them.
Or connect the computers via firewire and transfer them. -
Because of the amount of material I have, I use iPhoto Library Manager to manage three iPhoto libraries - one on my mac and two on separate external hard drives.
I can import videos/pictures directly from my camera to any of the libraries, but when I open iMovie, it only displays iphoto videos on my macbook hard drive, and often not even all of them! I've tried right clicking on the different hard drives and selecting "import movies" but my iPhoto libraries are always greyed out and not selectable.
All I want is to be able to edit (in iMovie) the video clips I've already uploaded to my iPhoto libraries! I want them consolidated on one external HD so that when I plug it in iMovie sees them and lets me play or edit the clips stored.Try forcing iPhoto to load the Library on the External Hard drive by launching it while holding down the Option key. Choose the Library on the External HD, and quit iPhoto, see if iMovie can see the Library with the iPhoto Videos contained inside.
-
Can Anyone give me a step by step on how to create a poster frame?
I am trying to create a poster frame for a video I edited with Final Cut Express HD. I have read all kinds of topics but they seem complicated. Does anyone know a simple way of creating a poster frame ?
Thanks!QDigital wrote:
I am trying to create a poster frame for a video I edited with Final Cut Express HD. I have read all kinds of topics but they seem complicated. Does anyone know a simple way of creating a poster frame ?
Thanks!
Poster frame can mean a few things.
More info please on what exactly you mean.
Al -
I have been trying to get night time "landscape" photos with a full or partial moon in them. The mountains, water, sky and stars all come out great but the moon and its reflection come out very bright, round and pretty blurry. I usually use my kit lens, tripod, shutter remote;100 to 400 ISO, 8-30 seconds on the shutter speed, aperture 4 to 8,10,16...,metering mode "spot", and using the Manual zone. Is there a way to "get it all"? ~Thanks!
You can do this... but the "trick" is to take the shot the evening BEFORE the "full" moon moon and not the of the full moon.
Whenever you have substantially mixed lighting problems (bright moon, dark city), you usually want to look for ways to bring the radically different exposure needs closer together so that the exposure needs from the moon are not so substantially different than the exposure needs of the city. By shooting the cityscape at "dusk" instead of at "night" you are helping to bring the exposures closer together AND usually a deep blue (end of dusk) sky color looks more appealing than a black sky anyway.
The moon rises a bit later each day (since there are 24 hours in a day but there are about 29.5 days in a Lunar month). The actual time between moonrises varies a bit.
You want to be in position a bit before sunset. You'll notice that the moon actually appears to be pretty much "full" one day before it it is technically the official "full" moon. But since you are taking the shot a day early, you'll get a dusky blue sky behind the full moon rather than a black sky. On the night of the full moon, the Earth is between the Sun and Moon -- so the moonrise actually occurs "at" sunset. At that time, however, the moon will be right on the horizon and not up high enough to be visible over the buidlings in your city nightscape shot. By the time the Moon is high enough, dusk will have completely ended and the sky will be black.
By getting there a a day EARLY, there will still be some light once the Moon is high enough. This will completely change your exposure.
The Moon looks best photographed with something called the "Loony 11" rule -- which suggests a correct exposure with f/11 and setting the shutter speed to the inverse of the ISO speed. So at ISO 100 you'd use 1/100th sec if you are using f/11 (and if you use something other than f/11 you can change the shutter speed to compensate.) But this rule is for when the moon is high. Nearer to moonrise the thick atmosphere will reduce the amount of light and will likely require an extra stop to expose (e.g. you may need to slow the shutter to 1/50th at ISO 100 with f/11 - use a tripod or boost ISO speed slightly (I'd use a tripod).
Incidentally, if you use a long focal length it will create the illusion of a very large moon relative to the size of the cityscape below.
You can use the "Photographer's Ephemeris" website (or application) to your advantage here. I use a mobile app named "Sun Surveyor" but I see the folks who made the "Photographer's Ephemeris" website have also created an app. The idea behind it is you give it the location and date and it will tell you not only the rise & set times for the Sun and Moon... it'll visually plot the position angle (compass heading) and altitude angle up from the horizon for any time of the day. And they also use a map. So... suppose you want to get a picture of a city with the moon just above a specific building... the website and/or app will tell you exactly where you need to stand AND at what time you need to be standing there to get that shot with the moon precisely where you want it to be.
Photographers Ephemeris: http://photoephemeris.com
Sun Surveyor: http://www.sunsurveyor.com
Both of these do "roughly" the same thing (I first learned about Photographer's Ephemeris... but at that time the only way to use them was via their website and desktop app (which is free, btw) -- they didn't have an app. So you had to use your computer to pre-plan you shot before leaving home.) That was great -- but didn't help me on vacations where my computer is back at home.
Then I learned about Sun Surveyor (which was basically Photographer's Ephemeris... but in "App" form for my iOS mobile device.) After I bought Sun Surveyor (it's a few dollars).... Photographer's Ephemeris launched their own app. So now you have at least a couple of options.
Good luck!
Tim Campbell
5D II, 5D III, 60Da -
Can anyone give me an example of for all entries in case of inner join
Hi abapers,
I am trying to replace an inner join with for all entries.
So kindly give me a demo code so that i can understand the use and apply it.
And plz tell me in which case it is better to use for all entries and in which case to use inner join so that better performance will occur.
With Regards
AnsumanHello Ansuman,
For example:
DATA:
BEGIN OF fs_eket,
ebeln LIKE ekko-ebeln, " Purchasing Document Number
ebelp LIKE ekpo-ebelp, " Item Number of Purchasing Doc
END OF fs_eket. " fs_eket
DATA:
t_eket LIKE " Purchase table
STANDARD TABLE
OF fs_eket.
Using joins:
select ebeln ebelp
into corresponding fields of table t_eket
from ekko join ekpo
on ekkoebeln eq ekpoebeln
where ebeln in s_sbeln.
The select statement can be replaced by
SELECT ebeln
FROM ekko
INTO CORRESPONDING FIELDS OF TABLE t_eket
WHERE ebeln IN s_ebeln.
IF sy-subrc EQ 0.
sort t_eket by ebeln.
SELECT ebeln
ebelp
FROM ekpo
INTO CORRESPONDING FIELDS OF TABLE t_eket
FOR ALL ENTRIES IN t_eket
WHERE ebeln EQ t_eket-ebeln.
The duplicate entries are removed by using FOR ALL ENTRIES. Or else by using the join, you have teh sort the table by key fields and then delete adjacent duplicates.
Hope it helps you
Regards
Indu -
Can anyone give me a code sample for enhancing a text datasource
for some reason it's a little different than using the regular transaction to master data user exits.
Thanks!Hi,
Rarely guys used it.."EXIT_SAPLRSAP_003"
In one forum, i read that 002 will support the text datasource too..try it and check
check this:
Re: Unable to debug user exit in CRM BW (EXIT_SAPLRSAP)
EXIT_SAPLRSAP_003
Maybe you are looking for
-
Msi x79 xpower II . Bios permanently corrupted
Hi i have a really bad situation on my mobo BIOS A and B corrupted. Can boot just from "multi bios button" Bios present V2.7 Used the "MSI Forum HQ USB flashing tool" with package you posted (150) but still no success. I also tried the M-flash method
-
Since I have the iPhone4S I can't delete songs from the iPhone anymore, which I downloaded with the iPhone. I sync the iPhone with my library. That works perfect. But than I want to delete the songs on the phone. That doesn't work. Can somebody tell
-
HT1338 help with installing Mountain Lion software...!
i am trying to update my mac book pro with the mountain lion software. i have purchased this in my mac app store but do not see where to go from here to install... anyone know what to do? do i not have enough space to install the update? how do i tel
-
How do I download my cd to mac computer
How do I download a picture cd to my mac computer
-
Ipad mini not installing updates after 8.0.2
after I upgraded my ipad mini, I can't install updates from the App Store. Does anyone have any ideas?