Can btrfs(2.6.31) file system be used during an install

Hi,
I would like to use btrfs for my root and home partition during an initial installation, but I notice that the btrfs in kernel 2.6.30 (what's on the CD) is old and has had the file system
format changed as of 2.6.31, so is not backward compatible.
Is there any way to install using the latest btrfs from 2.6.31 (or 2.6.32 if it is out ..) .... or am I just too beeding edge on this ..
Cheers,
Bernie

Cool, I am not the only one as it seems
I might be wrong but doesn't btrfs handle file system upgrades? But even then it doesn't seem to be possible to setup the root filesystem for btrfs currently. Because the setup enviroment lacks the proper tools, like mkfs.brtfs.
Maybe stability is an issue here. Some user might get very angry if their data gets lost After all btrfs is still under development.

Similar Messages

How can I access the Server file system without using any signed applet?

Is it possible for me to run an applet on the client machine such that the client can view my server file system and perform uploading and downloading of files through the applet without signing the applet?

Add the following in your java.policy file, your plug in accesses.
grant {
permission java.permission.AllPermission;

HT1199 I need your help, PLEASE. How can to fix "NO MOUNTABLE FILE SYSTEM" error of my back up hard drive on Mountain Lion OS?

I need your help, PLEASE. How can to fix "NO MOUNTABLE FILE SYSTEM" error of my back up hard drive on Mountain Lion OS?

Did you format the drive for Mac use before you tried to use it as a backup drive?
Are you using Time Machine on the drive? You can't view the contents of its backup database and the only way to access the info is directly from the Time Machine app.

Can an Access 2013 accdb file be encrypted using command line switches?

Can an Access 2013 accdb file be encrypted using command line switches?
I found all the command switches, but nothing about encrypting. And I've searched online and found nothing.
Can this be done?
Thanks!

Hi Sharon2000,
I think you could try the Database.NewPassword Method (DAO) in the VBScript file, and you could get more information about it from the link below:
#Database.NewPassword Method (DAO)
https://msdn.microsoft.com/en-us/library/office/ff844754.aspx
Here is a simple demo to achieve your issue.
Best Regards,
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey.

The form base xlm can't creat in the File System Repository

Hi all
A document created by the sap demo news can display in the folder base the cm Repository corrected,but can't in File System Repository.
What is the reason？
Edited by: joecui on Apr 9, 2010 7:11 AM

Hi,
You should not use the /etc repository for creating and storing xmlforms or any content!! This repository is used for configuration purposes and should not be visible to end users, otherwise there would be a very strong possibility that your CM config could be modified, deleted etc.
If you want you should create your own FS repository pointing to a separate FS location to which your end users have access.
Regards,
Lorcan.

Can you upload to a file system directly and not to wwv_flow_file_objects$

The following link shows how to upload a file. These files that are uploaded are stored in a table called wwv_flow_file_objects$ .
However what if I want to upload a file but save it to the file system (share) and not put it into wwv_flow_file_objects$ is that possible
http://download.oracle.com/docs/cd/B31036_01/doc/appdev.22/b28839/up_dn_files.htm#CJAHDJDA
When you use the file upload item type, the files you upload are stored in a table called wwv_flow_file_objects$

It has to be loaded to wwv_flow_file_objects$, but you can use the
UTL_FILE package to write it to a directory the database has access to. Use FOPEN with open_mode wb and use the PUT_RAW procedure to write into the file. Use READ procedure of the DBMS_LOB package to read your BLOB in junks.
UTL_FILE: http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14258/u_file.htm#i1003526
DBMS_LOB: http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14258/d_lob.htm#i999170
I think that should work.
Patrick
My APEX Blog: http://inside-apex.blogspot.com
The ApexLib Framework: http://apexlib.sourceforge.net
The APEX Builder Plugin: http://sourceforge.net/projects/apexplugin/

Ocfs2 can not mount the ocfs2 file system on RedHat AS v4 Update 1

Hi there,
I installed ocfs2-2.6.9-11.0.0.10.3.EL-1.0.4-1.i686.rpm onto RedHat linux AS v4 update 1. Installation looks OK. And configure ocfs2 (At this stage i only added 1 node in the cluster), load and start accordingly. Then paritition the disk and mkfs.ocfs2 the partition. Everything seems OK.
[root@node1 init.d]# ./o2cb status
Module "configfs": Loaded
Filesystem "configfs": Mounted
Module "ocfs2_nodemanager": Loaded
Module "ocfs2_dlm": Loaded
Module "ocfs2_dlmfs": Loaded
Filesystem "ocfs2_dlmfs": Mounted
Checking cluster ocfs2: Online
Checking heartbeat: Not active
But here you can check if the partition is there:
[root@node1 init.d]# fsck.ocfs2 /dev/hda12
Checking OCFS2 filesystem in /dev/hda12:
label: oracle
uuid: 27 74 a6 70 32 ad 4f 77 bf 55 8e 3a 87 78 ea cb
number of blocks: 612464
bytes per block: 4096
number of clusters: 76558
bytes per cluster: 32768
max slots: 2
/dev/hda12 is clean. It will be checked after 20 additional mounts.
However, mount -t ocfs2 /dev/hda12 just does not work.
[root@node1 oracle]# mount -t ocfs2 /dev/hda12 /oradata/m10g
mount.ocfs2: No such device while mounting /dev/hda12 on /oradata/m10g
[root@node1 oracle]# mount -L oracle
mount: no such partition found
Looks like mount just can not see the ocfs2 partition somehow.
I cannot find much info in metalink and anywhere else, does anyone here come across this issue before?
Regards,
Eric

I have been having a similar problem.
However, when I applied your fix I ended up with another problem:
(20765,0):ocfs2_initialize_osb:1179 max_slots for this device: 4
(20765,0):ocfs2_fill_local_node_info:851 I am node 0
(20765,0):dlm_request_join:756 ERROR: status = -107
(20765,0):dlm_try_to_join_domain:906 ERROR: status = -107
(20765,0):dlm_join_domain:1151 ERROR: status = -107
(20765,0):dlm_register_domain:1330 ERROR: status = -107
(20765,0):ocfs2_dlm_init:1771 ERROR: status = -12
(20765,0):ocfs2_mount_volume:912 ERROR: status = -12
ocfs2: Unmounting device (253,7) on (node 0)
Now the odd thing about this bit of log output (/var/log/messages)
is the fact that this is only a 2 node cluster and only one node has
currently mounted the file system in question. Now, I am running
the multipath drivers with my qla2xxx drivers under SLES9-R2.
However, at worst that should only double everything
(2 nodes x 2 paths through the SAN).
How can I get more low level information on what is consuming
the node slots in ocfs2? How can I force it to "disconnect" nodes
and recover/cleanup node slots?

Can DFS integrate as KM File system Repository?

We are implementing DFS (Distributed File System) and want to integrate it as a file system repository in KM content management. Has anyone done this before? If so, does anyone have instructions, considerations, recommendations on this matter?
Thanks ahead

Hi vicky,
Integrating file system repository is very easy process.
The step by step procedure is described in the help documentation.
http://help.sap.com/saphelp_nw70/helpdata/en/e3/92322ab24e11d5993800508b6b8b11/content.htm
Just u need to create a File system repository in the Repository manager
Mr.Chowdary

Partitioning previously used Windows NT File System for use with Mac and PC

With reference to this thread I found when searching for a solution: Can Windows NT File System(NTFS) format external hard drive work on iMac?
Below is the comment which led to me creating this new thread.
"rkaufmann87Sep 8, 2014 8:26 AM Re: Can Windows NT File System(NTFS) format external hard drive work on iMac?
in response to djj19
djj19 wrote:
Hi there,
I am about to follow your advice also for the same issue, the worry I have is that when I select partition 1, it says "To erase and partition the selected disk..." and so I am worried that if I do this it will erase the current contents of the hard disk drive (which were copied there from PCs in previous use).
If so, is there a way to use the hard disk drive with a mac without erasing the contents?
Thanks
Your case is different and NO do not partition the EHD yet unless you are prepared to completely erase your PC data. Before progressing though, do you intend to share the EHD with a PC and your Mac? If so this is not advisable but it is possible, however you will need to compromise. Please answer that question first and then we can proceed with some advice.
BTW it's generally not a good idea to ask a question in a thread that has already been answered, particularly one that is 3+ years old! In such a case it's normally better to create your own thread. "
The answer to the question in the above comment is that ideally I would like to use with both Mac and PC, why is this not advisable?
Please discuss my best options. I am wondering if I could transfer the current contents of the disk drive elsewhere, partition (which would erase) the disk drive, then put back the contents along with the new files which I have been trying to put on in the first place?
If this were to work would I then be tied down to only using this disk drive with a Mac?
Thank you.
Message was edited by: djj19

Ideally it is best to have seperate (discreet) EHD's for a PC and Mac due to their differences in HD formatting. However, this is not always feasable but there are alternative solutions availble. Among those are:
Creating and useing a Dropbox account that can be shared by PCs, Macs, IOS and Android devices. Dropbox allows for 2GB of free storage and additional storage is available for a small monthly fee.
Another possiblity is formating an EHD so that it may be shared by both a PC and Mac, this format is FAT 32. The downside of doing this is the size of the files written to the HD are limited to 4GB.

File System Sharing using Sun Cluster 3.1

Hi,
I need help on how to setup and configure the system to share a remote file system that is created on a SAN disk (SAN LUN ) between two Sun Solaris 10 servers.
The files in the remote system should be read/writabe from both the solaris servers concurrently.
As a security policy NFS mount is not allowed. Some one suggested it can be done by using Sun Cluster 3.1 agents on both servers. Any details on how I can do this using Sun Cluster 3.1 is really appreciated.
thanks
Suresh

You could do this by installing Sun Cluster on both systems and then creating a global file system on the shared LUN. However, if there was significant write activity on both nodes, then the performance will not necessarily what you need.
What is wrong with the security of NFS? If it is set up properly I don't think this should be a problem.
The other option would be to use shared QFS, but without Sun Cluster.
Regards,
Tim
---

Unable to create File System Repository using Network Path

Hi All,
I am trying to create a File System Repository.
I created a networkpath and windows system and used the same while creating File Repository according to the steps in help.
With out using Networkpath(i.e.,If I use IP address,I am able to create File System Repository).
But with the network path,it throws the following error as seen in Component Monitor.
<b>Startup Error: The localroot does not exist: C:\usr\sap\IGTE\j2ee\j2ee_00\cluster\server\NWP_001
My network path is NWP_001
</b>
Did any one face this problem?
Any help please........
Rgds,
Santhosh

Hi,
I am getting the same error even if I replace(\) by slashes(/).
I tried on EP6SP12 as well as EP6SP2 and got the same error on both.
The repository is searching for a folder named with
n/w path on the portal server itself(i.e, it is searching in the following folder
<b>C:\usr\sap\IGTE\j2ee\j2ee_00\cluster\server\NWP_001
My network path is NWP_001</b>),instead of searching on the remote system.
Can any one help me in solving the problem
Thanks in Advance.
Rgds,
Santhosh

How to Refresh JTree if a file System got changed during Run-time

Hi,
Can anyone tell me how to refresh a JTree(javax.swing.JTree) used for displaying file system(both local and remote).
I'm getting a problem if a file/directoy is added to the file system, after my Applet is loaded. Actually, i have used DefaultTreeModel's reload() method for refreshing and calling it inside SwingUtilities.invokeLater() using Thread, but its not working.
I want that the tree should reflect the latest Files/Directories on the click of a node, if any file or directory is added under that node.
Plz tell me if this is possible or not.
Thanks

Hi Shay_te,
Thanx for ur reply as i was eagerly waiting for the one.
but the example is using the TreeTable
and i have used JTree and DefaultTreeModel.
I'm calling reload(node) within treeExpand() method
Then, i'm regestring addTreeModelListener() as
m_model.addTreeModelListener(new javax.swing.event. TreeModelListener(){ }
inside which all 4 methods are over-ridden
code snippet is as follows so plz help me and tell if this the right way:
class DirExpansionListener implements TreeExpansionListener{
        DirExpansionListener(){
        public void treeExpanded(TreeExpansionEvent event) {
            final DefaultMutableTreeNode node = getTreeNode(event.getPath());
            final FileNode fnode = getFileNode(node);
            Thread runner = new Thread() {
                public void run() {
                    if (fnode != null && fnode.expand(node)) {
                        Runnable runnable = new Runnable() {
                            public void run() {
                                try{
                                   m_model.reload(node);
                                    m_model.addTreeModelListener(new javax.swing.event.TreeModelListener() {
                                        public void treeNodesChanged(javax.swing.event.TreeModelEvent evt) {
                                        public void treeStructureChanged(javax.swing.event.TreeModelEvent evt) {
                                            System.out.println("Path of node changed->"+evt.getTreePath());
                                        public void treeNodesInserted(javax.swing.event.TreeModelEvent evt) {
                                            System.out.println("Nodes Inserted method called..");
                                        public void treeNodesRemoved(javax.swing.event.TreeModelEvent evt) {
                                    System.out.println("Run inside DEvent called..");
                                    //Thread.sleep(500);
                                    //fnode.expand(node);
                                }catch(Exception e){System.out.println("err :" +e);}
                        SwingUtilities.invokeLater(runnable);
            runner.start();
        public void treeCollapsed(TreeExpansionEvent event) {}
    Please reply...

What file system to use in exporting from cs3 HD

Hi just a quick thank you for the information that I have received from this forum. Being from a small community this service is well appreciated.
My question is that okay so now I want to export my project and I need to know if there is a file system I can save it to, to be able to bring it back into premier if I so choose. The work flow I use in Premier especially with 2hr plus projects, with all the layering, slo mo etc bogs the project down, when I edited sd I would export half as a movie, edited second half and render to movie and combined both files together to create the long movie. In hd I don't understand the file system I could use, I am shooting sony hd hvr z7u shooting 1080i. So what file system and should it be mpeg or h264. Does Premiere support a workable file system.
Thanks
Joan

If I were you, I would use MPEG-2. Match all the output options to that of your origional footage. I see that your camera shoots HDV, so set the bitrate to 25Mbps or higher. If you have any more questions feel free to ask.

HELP!: How to read and write to External hard drives? What file system to use?

hey all, this has been really frustrating for me today. i want to be able to write to an external HDD that's formatted in NTFS. today i find out it isn't possible to write to this file system on a Mac and that on FAT32 it is possible. however, FAT32 can't address files larger than 4GB so this hurts me a lot. are there any other file systems that'll allow me to read and write from a Mac? my goal was to use freeNAS to build a NAS with an old tower and connect my external hard drives to it, but if i can't write to them this may not be possible.
thanks guys, i'd appreciate any help!

Read this, you don't need to install any software unless you have no choice.
https://discussions.apple.com/docs/DOC-3044
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

Implementing a remote file system to use with JFileChooser

Hi all
What I want to do is create a virtual file system so that I can browse through it with JFileChooser, select a file, and then take the correct action. If anyone has something like this that they can post it'd be much appreciated. Otherwise, does anyone have any advice about creating a navigation tool for traversing a vertual file system?

It appears that some people have indeed created some graphical FTP clients incorporating JFileChooser capabilities. The first entry on the search (and a few others) appear useful.
http://www.google.com/search?num=100&hl=en&c2coff=1&q=java+ftp+client+jfilechooser

Can btrfs(2.6.31) file system be used during an install

Similar Messages

Maybe you are looking for