Can default settings for new entries be changed?

When entering a new event, the default setting is "all day."  This rarely is the case.  Can it be turned off?

The main system fonts cannot be changed. There are a few utilities which will allow you to alter the font size in some menus.
This however is strictly a Microsoft issue. They coded Word to use a small font size for comments and gave the user no way to modify it. The only company that can fix this is MS.

Similar Messages

  • How do I change the default settings for new calendar events?

    So I am relatively new to Mac. I've been using iCal in conjunction with iCloud/iPhone heavily and one thing that I found really annoying is that by default, every new event that I make has two alerts already set. One message and one email message. It's really frustrating to have to go and set both alerts to "None" everytime I make a new event. I primarily use the calendar on my iCloud-synced iPhone to view and keep track of events and the Mac to actually create the events so there's no reason for me to need alerts on the computer. Is there any way to change the preferences so that there is no default alert?

    Look in the menubar, iCal > preferences > General tab > uncheck "Add a defult alert...."
    Regards,
    Captfred

  • Change Defaults Settings for Safari

    Since I upgraded to the New Mountain Lion, the Default Settings for my Safari browser is Bay City. How do I change this where I live?

    HI Norm,
    Open System Preferences/Network. Select Airport in the panel in the left then click the Advanced tab then click the Proxies tab. Where you see: Select a protocol to configure Make sure there are NO boxes checked.
    Click the Airport tab in that same window. Make sure your network is listed under: Preferred Networks
    If not, cick + Type in your network name or click Show Networks and select it from there. Your network should be listed in the Preferred Networks window now. Just below that window select the box next to: Remember networks this computer has joined.
    If you still have problems, open Airport Utility (Applications/Utilities)
    Select your device on the left then click Continue. In the next window click: I want to restore this AirPort device to its factory settings and then set it up again; then click Continue.
    I'm on Comcast without using any Proxies.
    You can disconnect the Comcast cable modem from it's power source for about 5 minutes then reconnect. Sometimes you have to recycle the modem.
    AirPort troubleshooting guide
    Also, on the G5. Go to /Library/Preferences/System Configuration and move these files to the Trash.
    com.apple.airport.preferences.plist
    com.apple.nat.plist
    com.apple.network.identification.plist
    You may only see the com.apple.airport.preferences.plist file in that list since it's running 10.5.x
    Don't worry about the other .plist files if they are not available.
    Carolyn
    Message was edited by: Carolyn Samit

  • How to change default settings for a video generator?

    I'm using a video generator (Lyric Media's Pan Zoom Pro) many times in the same project, and have to change the default settings for each new instance of the generator that I create. I'm wondering if there's any way to change the default settings for a generator (i.e., length of clip, individual slider and checkbox settings in the "controls" tab) so that each new instance automatically has my customized settings when I first open it.
    Thanks.

    That works for the all the controls/filter settings. The clip length still defaults to 10 seconds, but that's OK, since the main thing I was looking for was to change the clip's internal settings. Thanks for your help

  • How do I change the default settings for opening documents on my macbook?

    Hi I would like to know how to change the default settings for opening documents on my macbook. Everytime I try to open a doc. it automatically opens with Textedit, instead of Pages or another program.

    Select any particular document you wish to fix. Press COMMAND-I to open the Get Info window. In the Open With section select the desired Default Application from the dropdown menu. Click on the Change All button to extend the change to all similar documents.
    You can only assign one default application to one type of document.

  • Is it possible to create a new tab in 'Default settings for items' option?

    Hi everybody
    I am Raghu working in EBP2.0 & I have come across a difficlty and that is of creating a new tab and also the fields 'GL a/c', 'cost centre' or 'internal order' in this new tab.
    First of all please let me know whether is it possible to create a new tab for these fields.
    The purpose of this new tab is to default the cost centre and GL account with reference to shopping cart.
    As per current scenario, user has to enter the cost centre & the GL code as many times as the number of items in a shopping cart. I mean, if you have 10 items in your shopping cart then 10 times user has to input the cost centre & GL account. To avoid this we are required to add new tab so that per shopping cart we can enter the GL account & cost centre only once.
    Your immediate response would be very much apprecited.
    Regards
    Raghu

    hi Ram & Sreenivas
    Thanks for your immediate response.
    Ram, we can default GL a/c & cost centre in org structure since client wants to us to keep the option of entering these for every shopping cart.
    Sreenivas, I checked the 'copy to clipboard' option & its not there in EBP2 and I feel what you meant as cost centre tab is account assignment tab.
    Let me explain you more clearly about this requirement.
    Current Scenario
    1.Say a user has added 5 items to his SC.
    2.User has to enter cost centre & GL code 5 times & then he can order
    Required scenrio
    1.Say a user has added 5 items to his SC.
    2.As per the proposed functionality, user will click on 'Default settings for items' button. Three tabs will appear-->Basic data, Internal note & Delivery Address.
    We have to provide a new tab here where in user will default his GL & cost centre for this shopping cart & then order. This will help user to avoid entering GL & cost centre 5 times.
    For some reasons our client is not interested in defaulting this data.
    Please help in this regard if time permits.
    Thanks
    Raghu

  • Is it possible to change the default settings for the slideshow?

    The default settings for any new slideshow use the dreaded Ken Burns effect and some awful background music from a standard library. Having to turn these things off for every new slideshow I start is driving me nuts. Perhaps preferring no music accompaniment and a static photo on the screen is for some people rather boring - but I would prefer it, at least as a starting point. If anyone can help, I'd be very grateful. Thanks
    MacBook Pro   Mac OS X (10.4.8)   iPhoto 6

    Choose "Export" and then the QuickTime option.
    It will make a 4 track video with a simple "fade" effect between photos. You can set the dimensions and the duration of your photos. You can also remove the music or add your own from your iTunes Library (no purchased music if you intend to share these movies).

  • Change default settings for email transmission delay

    Outlook Mail delay:
    Is it possible to change the "default" settings (default is 5pm resp. 17.00) under Email - Options - Transmission delay. If yes, where resp. how?
    Kind regards
    Marcel

    Hi Marcel,
    Based on my knowledge, there is no parameter to directly change this default settings for message Delivery Delay in Outlook.
    I suggest we can ask for a help in Outlook Development forum to confirm if it can be achieved by using a macro. Please ask a question in the following forum to have a try:
    https://social.msdn.microsoft.com/Forums/office/en-US/home?forum=outlookdev
    Thanks for your understanding.
    Regards,
    Winnie Liang
    TechNet Community Support

  • Can't find default settings for slideshows

    Aloha--
    I'm running iPhoto 5.0.4, and want to set two defaults: my music, and my transitions (none). Every time I select a folder of photos and click "slideshow," however, the slideshow comes in withe "Jesu" from the sample music folder, transition - "default:dissolve", and the Ken Burns effect. I have looked at other posts on default settings, and they say (and show) a "save settings" button for the music choice. My settings have nothing like that.
    This is Apple! Don't tell me there's no way to set these two simple defaults.

    My error. The top of my page read 6 when I logged in yesterday and didn't check it further. Sorry about that.
    I don't think you can set a default set for new slideshows, only those that have been created. But that's for when you click on the Play button at the bottom of the Source pane next to the "+" button. That one has a Save option but it's only for that one folder of photos. Each new folder has to be saved also.
    You can get rid of the default sound track and replace it with something you'd like as the default. Open the iPhoto 5 application, Control-click on it and select Show package contents. Then navigate to the Contents/Resources/Music folder. There are the default music tracks. You can move the out and put in a couple of your own favorite tracks.
    Sorry about the mix up.

  • Change default settings for CaptureOnTouch with Canon imageFORMULA DR-C125

    Default settings for the CaptureOnTouch program get loaded automatically on startup for my Canon imageFORMULA DR-C125. I can personalize these settings, and take a backup, no problem. When another user logs into that very same computer with the very same scanner attached, they get the same automatically loaded default settings. In order for them to use the settings that I took a great deal of time to customize, they need to load the backup file that I created (whateverfilename.cot). It may seem like no big deal for somebody with some medium computer knowledge, but I have 50+ users logging into this computer, and I do not have time to show everyone of them what to do nor how to do it. Here comes my question: where are the defaults settings that Canon has created (which are so limited : they don't contain grayscale scan settings!) located on the computer (Program Files?) and what is the name of the file? I need to change these settings to something my users can easily deal with, and more importantly, I need scans that are nimble in size so that they can be emailed easily. Thank you so much in advance for you help! Stéphane

    right click sheet1=>select all sheet=>set print on one side.
    KR

  • How can I add a new entry for determining a requirement type

    Dear Friends,
    How can I add a new entry for determining a requirement type
    via Item Category + MRP type,  I see no new entries selection.
    This is in  Avb Check & TOR-> TOR-> Determination of req type using transaction.
    Please help.
    Regards
    Ravi.

    Availability Check and Transfer of Requirements > Transfer of Requirements > Define Requirements Types ?
    Just one node above?
    Never mind, you need to add entry on item category:S

  • How do I change the default zoom for New Tab only?

    The New Tab zoom in Firefox 33 is too high to see all 12 of my thumbnails. I changed it using ctrl- but the next time I opened a New Tab, the zoom was back at 100%. How do I change the default zoom for New Tab only?

    cor-el, what am I looking for in '''content-prefs.sqlite'''?

  • Altering default settings for alarms

    If I elect to have a default alarm for all entries, I can adjust the time of the alarm (in minutes) but the mode of the alarm, Message with Sound, appears unalterable. I would like to get my alarm via email, but I have to change the method manually for each new entry. Is there some way to change the default modality of the alarm to email?

    I too have a problem with defaults, so apologies for resurrecting this thread with another question, but our problems do seem related! Maybe by so doing some White Knight will answer us both.
    Until the past fortnight, on various earlier versions of iCal on various flavours of OSX, I had the default alarm as +Send an email to ...+
    I'd never really thought of how this might be, it just was. It was an unquestionable, unfathomable and immutable fact of life like taxes, death and lying politicians.
    But, for the past couple of weeks the default has been +Message with sound Basso+ - a setting I have never used nor would I ever want to use.
    I have no recollection of changing this default nor can I imagine anything that I might have done which would have changed it. I can find no Preference where it might be set, David Pogue's Missing Manual on Snow Leopard appears to give no clue and an amateurish search of this august forum finds no answer.
    So, why has it changed and how can I get it back to a default of sending emails?
    And please, can someone also help with my earlier, yet unanswered, crie de coure here http://discussions.apple.com/thread.jspa?threadID=2359722 ?
    Thanks in hope.

  • How to setup a default size for new divs in fluid grid layout in dreamweaver?

    Hi,
    how to setup a default size for a new divs in fluid grid layout in dreamweaver? I don't need the default size for new divs as a 100% width, I need them 13.69% as a one coulmn width only (7 coulmns fluid grids layout for desktop size 1000w).
    This problem I've faced when I intended to insert dozens of fluid grid divs in the layout.

    Sorry, I don't believe that you have had a good look at the Foundation framework. I'll now hold your hand while we go through the basics.
    Here is the specific page http://foundation.zurb.com/docs/components/grid.html
    The default values are
    Em-base : 16px
    Row width: 62.5em (62.5em x 16px = 1000px)
    Columns per row: 12
    These and other default values can be changed. The fact of the matter is that if you stipulate a section width of 2 or 3 or 12 columns, the widths will automatically be calculated for you.
    In your case, if you want 7 columns, all you need to do is change the number of columns per row and the rest is done for you.

  • Set a Default Calendar for New Appointments in iCal?

    I never found a post with a sufficient answer to this question. However, it seems as though I may have stumbled on a resolution myself.
    iCal has it's own default calendars: Home and Work. I use MobileMe so the MoblieMe calendar is listed there as well. I also have an iPhone 4. I wanted all calendars to syncronize automatically when I create a new appointment on any of the 3 locations (laptop, cloud, or phone). I found that when create a new event in iCal on my macbook pro, it wouldn't update with mobileme or my phone. This was because when I double click to create a new event, iCal automatically puts the new event into my "Home" calendar, even though it was unchecked and not highlighted. As soon as I double click to create the new event, iCal's default kicks in and the Home calendar in the "On My Mac" section suddenly becomes checked and highlighted all by itself and the new event is automatically placed there, never to be updated with the cloud or on my phone.
    I think the problem may be related to something I read under "How Do I Set a Default Calendar for New Appointments in iCal?" There a solution given was that the uppermost calendar was being defaulted to and it was suggested to drag the desired calendar to the uppermost position. None of my calendars would drag anywhere. However, I find that if I uncheck Home and Work in the column on the left under "On My Mac" AND then click the arrow so those two calendars are hidden (very important), and then check and highlight the only showing calendar: MobileMe, that (so far) when I doulbe click to create a new event, a new event is created in the MobileMe calendar, and Home and/or Work under the "On My Mac" section never becomes checked or highlighted. So the new event is created only in the MobileMe calendar listed and updates on my laptop, in the cloud, and on my phone.
    So far that has been my experience; but, it has been only minutes since I tried that, so let's see what happens after a couple of weeks or so of normal use and see if the problem is actually resolved.

    I have been searching for this information for weeks now -- thank you!
    This works for Google Calendar as well as for Mobile Me. I'm going to type a little more information here to see if I can help this answer come up more quickly for other users when they keyword search as I was doing.
    This answer helped me reset and change the default calendar for iCal. I can now set my Google Calendar as the default calendar in iCal. When I create a new event in iCal, it syncs to Google Calendar as the default calendar without having to choose another calendar. All my iCal new events now go directly to Google Calendar and sync to my iPhone and iPad. I couldn't move the gmail google calendar to the top position, and just unchecking Home and Work didn't change where new events defaulted. Now my new events automatically go from iCal to google calendar, and I don't lose track of any events. I think you can set any calendar as the default iCal calendar for new events using this approach.

Maybe you are looking for